Does a novel 3D printed individualized guiding template based on cutaneous fiducial markers contribute to accurate percutaneous insertion of pelvic screws? A preliminary phantom and cadaver study.

BACKGROUND: Most 3D-printed guiding templates require dissection of soft tissues to match the corresponding surfaces of the guiding templates. This study sought to explore the accuracy and acceptability of the novel 3D printed individualized guiding templates based on cutaneous fiducial markers in minimally invasive screw placement for pelvic fractures. METHODS: The printed template was tested on five high-fidelity biomimetic phantom models of the bony pelvis and its surrounding soft tissues as well as on two fresh frozen cadavers. Four cutaneous fiducial markers were transfixed on each phantom model prior to performing CT scans to reconstruct their 3D models. Personalized templates for guiding screw insertion were designed based on the positions of the fiducial markers and virtually planned target screw channels after scanning, followed by 3D printing of the guide. Phase 1 consisted of five expert surgeons inserting one anterograde supra-pubic screw and one sacroiliac screw percutaneously into each phantom model using the 3D-printed guide. The deviation of screw positions between the pre-operative planned and post-operative actual ones was measured after registering their 3D modelling. A Likert scale questionnaire was completed by the expert surgeons to assess their satisfaction and acceptability with the guiding template. Phase 2 consisted of repeating the same procedures on the fresh frozen cadavers in order to demonstrate face, content and concurrent validity. RESULTS: In Phase 1, all ten screws were successfully implanted with the assistance of the guiding template. Postoperative CT scans confirmed that all screws were safely positioned within the bony pelvic channels without breaching the far cortex. The mean longitudinal deviation at the bony entry point and screw tip between the pre-operative planned and post-operative actual screw paths were 2.83 ± 0.60 mm and 3.12 ± 0.81 mm respectively, with a mean angular deviation of 1.25 ± 0.41°. Results from the Likert questionnaire indicated a high level of satisfaction for using the guiding template among surgeons. In Phase 2, results were similar to those in Phase 1. CONCLUSIONS: The 3D-printed guiding template based on cutaneous fiducial markers shows potential for assisting in the accurate insertion of percutaneous screws in the pelvis.

Effect of low-voltage electrostatic field-assisted partial freezing on large yellow croaker protein properties and metabolomic analysis during storage.

BACKGROUND: Large yellow croaker is highly perishable during storage because of high protein and moisture content. The degradation of the fish is mainly attributed to microbial growth and enzyme activity, so it is important to find an efficient storage method to extend its shelf life. METHODOLOGY: This study investigated the effect of a low-voltage electrostatic field combined with partial freezing treatment on the physicochemical properties of myofibrillar protein (MP) and metabolomic analysis of large yellow croaker during preservation. The samples in chilled storage (C), partial freezing storage (PF) and 6 kV/m low-voltage electrostatic field partial freezing storage (LVEF-PF) were analyzed during an 18 day storage period. RESULTS: In comparison with the C and PF groups, LVEF-PF delayed the oxidation of MP by inhibiting the formation of carbonyl groups (2.25 nmol/mg pro), and maintaining higher sulfhydryl content (29.73 nmol/mg pro). Fourier transform infrared (FTIR) spectroscopy and fluorescence spectroscopy analysis also demonstrated that the LVEF-PF treatment maintained the stability of the protein structure by increasing the a-helix ratio (19.88%) and reducing the random coil ratio (17.83%). Scanning electron microscopy showed that, compared with the LVEF-PF group, there was more degeneration and aggregation of MP in the C and PF groups after 18 days' storage. The results of untargeted metabolomic analysis showed that 415 kinds of differential metabolites were identified after storage, and the difference levels of differential metabolites were least between the samples treated with LVEF-PF stored on the ninth day and the fresh samples. The main differential metabolic pathways during storage were amino acid metabolism and lipid metabolism. CONCLUSION: The LVEF-PF treatment could maintain the stability of myofibrillar protein in large yellow croaker during storage. These results showed a potential application of the LVEF-PF method for aquatic product preservation. © 2023 Society of Chemical Industry.

[mRNA Expression Profile Changes in Angiotensin-â ¡-Induced Atrial Myocardial Fibrosis in Rats].

Objective: To study the differences between the mRNA expression profile in angiotensin Ⅱ (Ang Ⅱ)-induced fibrotic cardiomyocytes and that of normal cardiomyocytes and the relevant signaling pathways. Methods: Six 8-week-old male Sprague-Dawley (SD) rats were randomly assigned to a control group and an Ang Ⅱ group, with 3 rats in each group. Rats in the control group were injected via caudal vein with 0.9% normal saline at 2 mg/kg per day, while rats in the Ang Ⅱ group were injected with Ang Ⅱ via caudal vein at 2 mg/kg per day. The medications were continuously administered in the two groups for 14 days. The degree of myocardial fibrosis was determined by Masson's Trichrome staining and the content of collagen Ⅰ was determined by immunohistochemistry. High throughput sequencing was performed to measure the mRNA expression of rat cardiomyocytes in the two groups and to screen for differentially-expressed mRNAs. The differentially-expressed mRNAs were analyzed by Gene Ontology (GO) analysis and Kyoto Encyclopedia of Genes and Genomes (KEGG) pathway analysis. Results: Compared with those of the control group, the degree of myocardial fibrosis and the content of collagen Ⅰ in Ang Ⅱ group were significantly higher ( P<0.05). Through sequencing, 313 differentially-expressed mRNAs were identified, with 201 being up-regulated and 112 being down-regulated. Go and KEGG analyses showed that these differentially-expressed mRNA were involved in a variety of biological regulatory functions and pathways of myocardial fibrosis. Conclusion: Ang Ⅱ can cause myocardial fibrosis in rats. There are significant differences in mRNA expression between fibrotic cardiomyocytes and normal cardiomyocytes. The differentially expressed mRNAs may play an important role in biological processes, including immune response, cell remodeling, and extracellular matrix deposition.

Combination of enzymatically hydrolyzed potato powder with skimmed milk powder on the quality improvements of yogurt during refrigeration storage.

This study aimed to prepare a stirred type of fat-free yogurt from enzymatically hydrolyzed potato powder (EHPP) and skimmed milk powder (SMP) without changing its quality and consumer acceptance. The yogurt formulations prepared contained different amount of EHPP 0, 10, 25 and 50% and were stored for 28 days at 4 °C and observed that with increasing substitution ratio, acid production was increased while the viability of lactic acid bacteria was decreased after 28 days of storage at 4 °C. The antioxidant activities (2-Diphenyl-1-picryl-hydrazyl (DPPH) free radical scavenging activity and ferric reducing antioxidant power (FRAP) of the yogurt were increased with increasing EHPP over the storage period. The yogurt formulations having 25 to 50% EHPP has the highest DPPH free radical scavenging activity and FRAP values. Water holding capacity (WHC) was decreased over the storage period with 25% EHPP. The hardness, adhesiveness and gumminess were decreased while no significant change was found in springiness with EHPP addition over the storage period. The rheological analysis showed an elastic behavior of yogurt gels with EHPP supplementation. The sensory results of yogurt containing 25% EHPP have the highest values of taste and acceptance. Yogurt in combination with EHPP and SMP has the higher levels of WHC than non-supplemented yogurt and better stability was recorded during storage. Supplementary Information: The online version contains supplementary material available at 10.1007/s13197-023-05737-9.

Recent advance in technological innovations of sugar-reduced products.

Sugar is crucial as an essential nutrient for humans as well as for providing texture, sweetness and so on to food. But with the rise in people's pursuit of health, it is becoming increasingly clear that excessive consumption of sugar can locate a load on the body. It has been that excessive sugar is associated with many diseases, such as dental caries, obesity, diabetes, and coronary heart disease. Therefore, researchers and industries are trying to reduce or substitute sugar in food without affecting the sensory evaluation. Substituting sugar with sweeteners is alternatively becoming the most traditional way to minimize its use. So far, the sweeteners such as stevia and xylitol have been are commercially applied. Several studies have shown that technological innovation can partially compensate for the loss in sweetness as a result of sugar reduction, such as cross-modal interactions that stimulate sweetness with aroma, nanofiltration that filters disaccharides and above, enzyme-catalyzed sugar hydrolysis, and microbial fermentation that turns sugar into sugar alcohol. This review summarizes these studies to enhance the safety and quality of sugar-reduced products, and will provide some theoretical frameworks for the food industry to reduce sugar in foods, meet consumers' needs, and promote human health.

A New Design of a CMOS Vertical Hall Sensor with a Low Offset.

Vertical Hall sensors (VHSs), compatible with complementary metal oxide semiconductor (CMOS) technology, are used to detect magnetic fields in the plane of the sensor. In previous studies, their performance was limited by a large offset. This paper reports on a novel CMOS seven-contact VHS (7CVHS), which is formed by adding two additional contacts to a traditional five-contact VHS (5CVHS) to alleviate the offset. The offset voltage and offset magnetic field of the 7CVHS are reduced by 90.20% and 88.31% of those of the 5CVHS, respectively, with a 16.16% current-related sensitivity loss. Moreover, the size and positions of the contacts are optimized in standard GLOBALFOUNDRIES 0.18 µm BCDliteTM technology by scanning parameters using FEM simulations. The simulation data are analyzed in groups to study the influence of the size and contact positions on the current-related sensitivity, offset voltage, and offset magnetic field.

Study on Purification and Characterization of Polyphenol Oxidase from Acetes chinensis.

Acetes chinensis (belonging to the Decapoda Sergestidae genus) is widely distributed in East Asian waters and is extremely widespread and present in the shallow coastal areas of China. Polyphenol oxidase (PPO), which was extracted from Acetes chinensis, was purified in a four-step procedure involving phosphate-buffered saline treatment, ammonium sulphate precipitation, DEAE-Cellulose chromatography, and Phenyl-Sepharose HP chromatography, and then, its biochemical characterization was measured. The specific activity of the purified enzyme was increased to 643.4 U/mg, which is a 30.35 times increase in purification, and the recovery rate was 17.9%. L-dopa was used as the substrate, the enzymatic reactions catalyzed by PPO conformed to the Michaelis equation, the maximum reaction velocity was 769.23 U/mL, and the Michaelis constant Km was 0.846 mmol/L. The optimal pH of PPO from Acetes chinensis was 7.5, and the optimal temperature was 35 °C. The metal ions experiment showed that Mn2+ and K+ could enhance the activity of PPO; that Ba2+ and Ca2+ could inhibit the activity of PPO; and that Cu2+ had a double effect on PPO, increasing the PPO activity at low concentrations and inhibiting the PPO activity at high concentrations. The inhibitor experiment showed that the inhibitory effects of EDTA and kojic acid were weak and that ascorbic acid and sodium pyrophosphate had good inhibitory effects. The purification and characterization of Acetes chinensis serve as guidelines for the prediction of enzyme behavior, leading to effective prevention of enzymatic browning during processing.

Characterization of silver carp myosin glycated with phosphorylated konjac oligo-glucomannan.

BACKGROUND: Myosin (Ms) is abundant in fish meat, but it has limited application in the food industry because of its low solubility and thermal stability. Our previous reports found that these functional properties of Ms can be significantly improved after glycation with konjac oligo-glucomannan (KOG). However, the effects of phosphorylated KOG (PKOG) on physicochemical, structural and functional properties of silver carp Ms are still unknown. RESULTS: This study characterized the silver carp Ms protein glycated with PKOG at 50 °C and 75% relative humidity for 48 h. As degree of phosphorylation increased, free amino content increased, whereas degree of grafting decreased. Meanwhile, isoelectric point (pI) reduced, however, PKOGs showed no differences in pI. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis suggested the formation of glycoconjugates, and scanning electron microscopy revealed thinner flakes and uneven appearance of glycoconjugates. Fourier transform infrared spectroscopy indicated that the amide I, II and III bands of Ms were changed by the glycation. Ms became highly soluble in 0.5 mol L-1 NaCl with increased phosphate addition in PKOGs. Thermal stability of Ms was effectively improved when heated at 80 °C for 60 min. CONCLUSION: Glycation with appropriate PKOG might be a promising method for Ms modification because of the resulting improvement in solubility and thermal stability. © 2021 Society of Chemical Industry.

Effects of Oil Droplet Size and Interfacial Protein Film on the Properties of Fish Myofibrillar Protein-Oil Composite Gels.

The effects of oil droplet size and the formation of an interfacial protein film (IPF) on silver carp myofibrillar protein (MP)-oil composite gels were studied. MP- or Tween 80-stabilized camellia seed oil emulsions with different droplet sizes were prepared and added to MPs to prepare composite gels. The oil droplet size of the Tween 80-stabilized emulsion was significantly smaller (p < 0.05) than that of the MP-stabilized emulsion with the same homogenization speed. However, polymerization of Tween 80-stabilized emulsions during the preparation of the composite gels was found. Composite gels with the MP-stabilized emulsions of a small droplet size showed significantly improved water-holding capacity, texture, and dynamic rheological properties. Interfacial shear rheology studies revealed that the storage modulus (G') of the MP-stabilized emulsion composite gels was higher than that of the Tween 80-stabilized gels, and the tan δ of the MP-stabilized oil emulsion composite gels was smaller than that of the Tween 80-stabilized gels, indicating that stronger elastic gel structures were formed. These results suggested that the IPF formed in the MP-stabilized emulsion helped stabilize the oil droplets embedded in the protein gel network, and the smaller the droplet size, the more stable the composite gel. This work provides a better understanding of how oil emulsions interact with protein and affect the properties of MP-oil composite gels.

[Characterization of AOX family members from Aquilaria sinensis and their responses to wounding].

Aquilaria sinensis is a typical inducible medicinal plant, that can produce agarwood only after it is wounded by external stimuli. Alternative oxidase(AOX) is one of the terminal oxidases of the plant mitochondrial electron transport, which plays an important role in plants' response to environmental stress. In order to reveal the physiological function of AOX gene in the process of agarwood formation from A.sinensis induced by wounding, AOX gene was cloned based on the transcriptome database and then identified by the bioinformatics analysis, and their expression pattern in different tissues and under wounding stress were detected by qRT-PCR. The results as follows. Three AOX genes were cloned from A.sinensis for the first time. They were named AsAOX1a, AsAOX1d and AsAOX2, respectively. The tissue expression shown that AsAOX1a is mainly expressed in the stem and the seed, and the AsAOX1d and AsAOX2 genes are mainly expressed in the pulp and the stem. AsAOX1a and AsAOX1d genes are highly responsive to wounding stress, and their response time was different. In addition, the expression of AsAOX1a and AsAOX2 induced by wounding are reduced by H_2O_2 treatment, but promoted by AsA treatment. The cloning, bioinformatics analysis and expression characteristics of AOX genes from A.sinensis provided basic information for further study the function of AOX genes in the development of A.sinensis, especially in the process of agarwood formation of A. sinensis induced by wounding.

A New Design of a Single-Device 3D Hall Sensor: Cross-Shaped 3D Hall Sensor.

In this paper, a new single-device three-dimensional (3D) Hall sensor called a cross-shaped 3D Hall device is designed based on the five-contact vertical Hall device. Some of the device parameters are based on 0.18 µm BCDliteTM technology provided by GLOBALFOUNDRIES. Two-dimensional (2D) and 3D finite element models implemented in COMSOL are applied to understand the device behavior under a constant magnetic field. Besides this, the influence of the sensing contacts, active region's depth, and P-type layers are taken into account by analyzing the distribution of the voltage along the top edge and the current density inside the devices. Due to the short-circuiting effect, the sensing contacts lead to degradation in sensitivities. The P-type layers and a deeper active region in turn are responsible for the improvement of sensitivities. To distinguish the P-type layer from the active region which plays the dominant role in reducing the short-circuiting effect, the current-related sensitivity of the top edge (Stop) is defined. It is found that the short-circuiting effect fades as the depth of the active region grows. Despite the P-type layers, the behavior changes a little. When the depth of the active region is 7 µm and the thickness of the P-type layers is 3 µm, the sensitivities in the x, y, and z directions can reach 91.70 V/AT, 92.36 V/AT, and 87.10 V/AT, respectively.

Antimicrobial effect and mechanism of cinnamon oil and gamma radiation on Shewanella putrefaciens.

The aims of this study were to observe the antimicrobial effect and mechanism of cinnamon oil combined with gamma radiation on Shewanella putrefaciens. Gamma radiation increased the antimicrobial activity of cinnamon oil, and the relative radiation sensitivity of gamma radiation on S. putrefaciens was increased by cinnamon oil. Gamma radiation significantly increased the changes of bacterial morphology, intra-adenosine 5'-triphosphate (intra-ATP) and extra-ATP concentrations and pHin value of S. putrefaciens treated cinnamon oil. Although, gamma radiation used alone didn't damage the bacterial morphology and ATP concentrations significantly. Gamma radiation assisted cinnamon oil to damage the cell permeability and integrity of S. putrefaciens, thus the combination of cinnamon oil and gamma radiation showed a better antimicrobial activity than used alone.

Influences of an Aluminum Covering Layer on the Performance of Cross-Like Hall Devices.

This work studies the effects of an aluminum covering on the performance of cross-like Hall devices. Four different Hall sensor structures of various sizes were designed and fabricated. The sensitivity and offset of the Hall sensors, two key points impacting their performance, were characterized using a self-built measurement system. The work analyzes the influences of the aluminum covering on those two aspects of the performance. The aluminum layer covering mainly leads to an eddy-current effect in an unstable magnetic field and an additional depletion region above the active region. Those two points have influences on the sensitivity and the offset voltage, respectively. The analysis guides the designer whether to choose covering with an aluminum layer the active region of the Hall sensor as a method to reduce the flicker noise and to improve the stability of the Hall sensor. Because Hall devices, as a reference element, always suffer from a large dispersion, improving their stability is a crucial issue.

Optimization of Preparation Conditions for Lysozyme Nanoliposomes Using Response Surface Methodology and Evaluation of Their Stability.

The main purpose of this study was to optimize the preparation of lysozyme nanoliposomes using response surface methodology and measure their stability. The stabilities of lysozyme nanoliposomes in simulated gastrointestinal fluid (SGF), simulated intestinal fluid (SIF), as well as pH, temperature and sonication treatment time were evaluated. Reverse-phase evaporation method is an easy, speedy, and beneficial approach for nanoliposomes' preparation and optimization. The optimal preparative conditions were as follows: phosphatidylcholine-to-cholesterol ratio of 3.86, lysozyme concentration of 1.96 mg/mL, magnetic stirring time of 40.61 min, and ultrasound time of 14.15 min. At the optimal point, encapsulation efficiency and particle size were found to be 75.36% ± 3.20% and 245.6 nm ± 5.2 nm, respectively. The lysozyme nanoliposomes demonstrated certain stability in SGF and SIF at a temperature of 37 °C for 4 h, and short sonication handling times were required to attain nano-scaled liposomes. Under conditions of high temperature, acidity and alkalinity, lysozyme nanoliposomes are unstable.

Effect of slaughter methods on the quality of Chilean jack mackerel (Trachurus murphyi) during refrigerated storage.

The main objective of this study was to assess the influence of slaughter methods on the quality of Chilean jack mackerel (Trachurus murphyi) during refrigerated storage on board. Fishes were slaughtered by asphyxia in air (AA), asphyxia in ice water (AI) or stunning fish heads (SH), and the rigor mortis, pH, total volatile basic nitrogen (TVB-N), trimethylamine (TMA), 2-thiobarbituric acid reactive substances (TBARS) and sensory properties for the fishes were analyzed. On day 0, Chilean jack mackerel samples of AI group displayed higher pH values than those of AA and SH groups. TVB-N, TMA and TBARS values of all samples increased with the storage time, and these values of AI had a lower increase than AA and SH. Moreover, samples of AI had a better sensory score than AA and SH during storage. It can be concluded that slaughter method of asphyxia in ice water for Chilean jack mackerel exhibit the better efficiency on maintaining the fish quality during refrigerated storage on board.

ω-3 polyunsaturated fatty acids-derived lipid metabolites on angiogenesis, inflammation and cancer.

Epidemiological and pre-clinical studies support the anti-tumor effects of ω-3 PUFAs; however, the results from human trials are mixed, making it difficult to provide dietary guidelines or recommendations of ω-3 PUFAs for disease prevention or treatment. Understanding the molecular mechanisms by which ω-3 PUFAs inhibit cancer could lead to better nutritional paradigms and human trials to clarify their health effects. The ω-3 PUFAs exert their biological activities mainly through the formation of bioactive lipid metabolites. Here we discuss the biology of cyclooxygenase, lipoxygenase and cytochrome P450 enzymes-derived ω-3-series lipid metabolites on angiogenesis, inflammation and cancer.

Performance comparison of cross-like Hall plates with different covering layers.

This paper studies the effects of the covering layers on the performance of a cross-like Hall plate. Three different structures of a cross-like Hall plate in various sizes are designed and analyzed. The Hall plate sensitivity and offset are characterized using a self-built measurement system. The effect of the P-type region over the active area on the current-related sensitivity is studied for different Hall plate designs. In addition, the correlation between the P-type covering layer and offset is analyzed. The best structure out of three designs is determined. Besides, a modified eight-resistor circuit model for the Hall plate is presented with improved accuracy by taking the offset into account.

Factors influencing shoulder stiffness after open reduction and internal fixation of proximal humeral fractures.

OBJECTIVES: The study aimed to investigate the factors associated with shoulder stiffness following open reduction and internal fixation (ORIF) of proximal humeral fractures. PATIENTS AND METHODS: The retrospective study included a total of 151 patients who underwent ORIF of proximal humeral fractures between January 2016 and May 2021. Based on their shoulder joint motion at the latest follow-up, the patients were divided into two groups. The stiffness group (n=32; 8 males, 24 females; mean age: 62.4±9.3 years; range, 31 to 79 years), exhibited restricted shoulder forward flexion (<120°), limited arm lateral external rotation (<30°), and reduced back internal rotation below the L3 level. The remaining patients were included in the non-stiffness group (n=119; 52 males, 67 females; mean age: 56.4±13.4 years; range, 18 to 90 years). Various factors were examined to evaluate the association with shoulder stiffness following ORIF of proximal humeral fractures by multivariate unconditional logistic regression models. RESULTS: The mean follow-up duration was 31.8±12.6 (range, 12 to 68) months. Based on the results of the multivariate regression analysis, it was found that high-energy injuries [compared to low-energy injuries; adjusted odds ratio (aOR)=7.706, 95% confidence interval (CI): 3.564-15.579, p<0.001], a time from injury to surgery longer than one week (compared to a time from injury to surgery equal to or less than one week; aOR=5.275, 95% CI: 1.7321-9.472, p=0.031), and a body mass index (BMI) >24.0 kg/m2 (compared to a BMI between 18.5 and 24.0 kg/m2 ; aOR=4.427, 95% CI: 1.671-11.722, p=0.023) were identified as risk factors for shoulder stiffness following ORIF of proximal humeral fractures. CONCLUSION: High-energy injury, time from injury to surgery longer than one week, and BMI >24.0 kg/m2 were identified as independent risk factors for shoulder stiffness after proximal humeral fracture surgery, which should be treated with caution in clinical treatment.

A novel g-C3N4-SH@konjac glucomannan composite aerogel for patulin removal from apple juice and its photocatalytic regeneration.

Patulin (PAT) is a hazardous mycotoxin frequently occurs in fruit industry. A reusable g-C3N4-SH@KG composite aerogel for PAT removal in a novel "dark adsorption-light regeneration" mode was prepared by thiol(-SH) functionalization and konjac glucomannan (KG) immobilization. The g-C3N4-SH@KG was characterized by SEM, FT-IR, XPS and UV-Vis DRS, and its PAT adsorption and photocatalytic regeneration behaviors and mechanisms were investigated. The g-C3N4-SH@KG exhibited good regeneration performance, maintaining 83% of PAT initial adsorption capacity (0.92 mg/g) after 5 "adsorption-regeneration" cycles. The adsorption process was endothermic and spontaneous. •OH and h+ generated by photocatalysis were the main substances that degraded PAT into two products and regenerated -SH. The g-C3N4-SH@KG could effectively remove PAT without negative impact on juice quality. The study provided a new strategy for the regeneration of thiol-functionalized PAT adsorbents, and a new idea for the application of non-selective photocatalysis in the control of food contaminations.

High Trunk Truncation as a Potential Sustainable Management Option for Asian Longhorned Beetle on Salix babylonica.

The Asian longhorned beetle (ALB) causes substantial economic and ecological losses, thus, an environmentally friendly management strategy is needed. Here, we propose high trunk truncation (HTT), the removal of the above 200 cm portion of trees, as a sustainable management strategy to control ALB. To examine the hypothesis, an initial step involved the assessment of various biological characteristics of ALB. Subsequently, a controlled field experiment was carried out utilizing HTT. Finally, HTT was applied in two additional ALB infestation regions. The results of the study of the biological characteristics of ALB showed that 76.31-78.88% of frass holes and 85.08-87.93% of emergence holes were located on branches above 200 cm. Adults preferred to feed on branches 2-3 cm in diameter, ALB eggs were predominantly laid on 5 cm branches, and both were primarily located above 200 cm. These results revealed a correlation between the number of ALBs and the tree crown height. The controlled field experiment showed that the number of ALBs was significantly decreased when the HTT strategy was implemented: approximately 90% of frass holes and 95% of adults were eradicated by HTT compared with the control. Different field surveys involving HTT have shown similar results. These findings provide valuable insights into a sustainable and efficient management strategy for reducing the number of ALBs.