On the Fragmentation of Ni(II) ß-Diketonate-Diamine Complexes as Molecular Precursors for NiO Films: A Theoretical and Experimental Investigation.

NiO-based nanomaterials have attracted considerable interest for different applications, which have stimulated the implementation of various synthetic approaches aimed at modulating their chemico-physical properties. In this regard, their bottom-up preparation starting from suitable precursors plays an important role, although a molecular-level insight into their reactivity remains an open issue to be properly tackled. In the present study, we focused on the fragmentation of Ni(II) diketonate-diamine adducts, of interest as vapor-phase precursors for Ni(II) oxide systems, by combining electrospray ionization mass spectrometry (ESI-MS) with multiple collisional experiments (ESI-MSn) and theoretical calculations. The outcomes of this investigation revealed common features in the fragmentation pattern of the target compounds: (i) in the first fragmentation, the three complexes yield analogous base-peak cations by losing a negatively charged diketonate moiety; in these cations, Ni-O and Ni-N interactions are stronger and the Ni positive charge is lower than in the parent neutral complexes; (ii) the tendency of ligand electronic charge to migrate towards Ni further increases in the subsequent fragmentation, leading to the formation of a tetracoordinated Ni environment featuring an interesting cation-π intramolecular interaction.

The Early Steps of Molecule-to-Material Conversion in Chemical Vapor Deposition (CVD): A Case Study.

Transition metal complexes with ß-diketonate and diamine ligands are valuable precursors for chemical vapor deposition (CVD) of metal oxide nanomaterials, but the metal-ligand bond dissociation mechanism on the growth surface is not yet clarified in detail. We address this question by density functional theory (DFT) and ab initio molecular dynamics (AIMD) in combination with the Blue Moon (BM) statistical sampling approach. AIMD simulations of the Zn ß-diketonate-diamine complex Zn(hfa)2TMEDA (hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate; TMEDA = N,N,N',N'-tetramethylethylenediamine), an amenable precursor for the CVD of ZnO nanosystems, show that rolling diffusion of this precursor at 500 K on a hydroxylated silica slab leads to an octahedral-to-square pyramidal rearrangement of its molecular geometry. The free energy profile of the octahedral-to-square pyramidal conversion indicates that the process barrier (5.8 kcal/mol) is of the order of magnitude of the thermal energy at the operating temperature. The formation of hydrogen bonds with surface hydroxyl groups plays a key role in aiding the dissociation of a Zn-O bond. In the square-pyramidal complex, the Zn center has a free coordination position, which might promote the interaction with incoming reagents on the deposition surface. These results provide a valuable atomistic insight on the molecule-to-material conversion process which, in perspective, might help to tailor by design the first nucleation stages of the target ZnO-based nanostructures.

Supported Mn3O4 Nanosystems for Hydrogen Production through Ethanol Photoreforming.

Photoreforming promoted by metal oxide nanophotocatalysts is an attractive route for clean and sustainable hydrogen generation. In the present work, we propose for the first time the use of supported Mn3O4 nanosystems, both pure and functionalized with Au nanoparticles (NPs), for hydrogen generation by photoreforming. The target oxide systems, prepared by chemical vapor deposition (CVD) and decorated with gold NPs by radio frequency (RF) sputtering, were subjected to a thorough chemico-physical characterization and utilized for a proof-of-concept H2 generation in aqueous ethanolic solutions under simulated solar illumination. Pure Mn3O4 nanosystems yielded a constant hydrogen production rate of 10 mmol h-1 m-2 even for irradiation times up to 20 h. The introduction of Au NPs yielded a significant enhancement in photocatalytic activity, which decreased as a function of irradiation time. The main phenomena causing the Au-containing photocatalyst deactivation have been investigated by morphological and compositional analysis, providing important insights for the design of Mn3O4-based photocatalysts with improved performances.

Insights into the Plasma-Assisted Fabrication and Nanoscopic Investigation of Tailored MnO2 Nanomaterials.

Among transition metal oxides, MnO2 is of considerable importance for various technological end-uses, from heterogeneous catalysis to gas sensing, owing to its structural flexibility and unique properties at the nanoscale. In this work, we demonstrate the successful fabrication of supported MnO2 nanomaterials by a catalyst-free, plasma-assisted process starting from a fluorinated manganese(II) molecular source in Ar/O2 plasmas. A thorough multitechnique characterization aimed at the systematic investigation of material structure, chemical composition, and morphology revealed the formation of F-doped, oxygen-deficient, MnO2-based nanomaterials, with a fluorine content tunable as a function of growth temperature ( TG). Whereas phase-pure ß-MnO2 was obtained for 100 °C ≤ TG ≤ 300 °C, the formation of mixed phase MnO2 + Mn2O3 nanosystems took place at 400 °C. In addition, the system nano-organization could be finely tailored, resulting in a controllable evolution from wheat-ear columnar arrays to high aspect ratio pointed-tip nanorod assemblies. Concomitantly, magnetic force microscopy analyses suggested the formation of spin domains with features dependent on material morphology. Preliminary tests in Vis-light activated photocatalytic degradation of rhodamine B aqueous solutions pave the way to possible applications of the target materials in wastewater purification.

Molecular Engineering of MnII Diamine Diketonate Precursors for the Vapor Deposition of Manganese Oxide Nanostructures.

Molecular engineering of manganese(II) diamine diketonate precursors is a key issue for their use in the vapor deposition of manganese oxide materials. Herein, two closely related ß-diketonate diamine MnII adducts with different fluorine contents in the diketonate ligands are examined. The target compounds were synthesized by a simple procedure and, for the first time, thoroughly characterized by a joint experimental-theoretical approach, to understand the influence of the ligand on their structures, electronic properties, thermal behavior, and reactivity. The target compounds are monomeric and exhibit a pseudo-octahedral coordination of the MnII centers, with differences in their structure and fragmentation processes related to the ligand nature. Both complexes can be readily vaporized without premature side decompositions, a favorable feature for their use as precursors for chemical vapor deposition (CVD) or atomic layer deposition applications. Preliminary CVD experiments at moderate growth temperatures enabled the fabrication of high-purity, single-phase Mn3 O4 nanosystems with tailored morphology, which hold great promise for various technological applications.

Tailored Fabrication of Transferable and Hollow Weblike Titanium Dioxide Structures.

The preparation of weblike titanium dioxide thin films by atomic layer deposition on cellulose biotemplates is reported. The method produces a TiO2 web, which is flexible and transferable from the deposition substrate to that of the end application. Removal of the cellulose template by calcination converts the amorphous titania to crystalline anatase and gives the structure a hollow morphology. The TiO2 webs are thoroughly characterized using electron microscopy, X-ray diffraction, and X-ray photoelectron spectroscopy to give new insight into manufacturing of porous titanium dioxide structures by means of template-based methods. Functionality and integrity of the TiO2 hollow weblike thin films were successfully confirmed by applying them as electrodes in dye-sensitized solar cells.

Enhancement of nitrite and nitrate electrocatalytic reduction through the employment of self-assembled layers of nickel- and copper-substituted crown-type heteropolyanions.

Multilayer assemblies of two crown-type type heteropolyanions (HPA), [Cu20Cl(OH)24(H2O)12(P8W48O184)](25-) and Ni4(P8W48O148)(WO2)](28-), have been immobilized onto glassy carbon electrode surfaces via the layer-by-layer (LBL) technique employing polycathion-stabilized silver nanoparticles (AgNP) as the cationic layer within the resulting thin films characterized by electrochemical and physical methods. The redox behaviors of both HPA monitored during LBL assembly with cyclic voltammetry and impedance spectroscopy revealed significant changes by immobilization. The presence of AgNPs led to the retention of film porosity and electronic conductivity, which has been shown with impedance and voltammeric studies of film permeabilities toward reversible redox probes. The resulting films have been characterized by physical methods. Finally, the electrocatalytic performance of obtained films with respect to nitrite and nitrate electrocatalytic reduction has been comparatively studied for both catalysts. Nickel atoms trapped inside HPA exhibited a higher specific activity for reduction.

Fluoroalkylsilanes with Embedded Functional Groups as Building Blocks for Environmentally Safer Self-Assembled Monolayers.

The fabrication of silane-based fluorinated self-assembled monolayers (FSAMs) on indium tin oxide (ITO, a transparent electrode) was carried out making use of the following fluoroalkylsilanes (FAS): 2,2,3,3,4,4,5,5,6,6,6-undecafluoro-N-[3-(trimethoxysilyl)propyl]hexanamide (1; R(F) = C5F11) and 1,1,2,2,3,3,4,4,4-nonafluoro-N-[3-(trimethoxysilyl)propyl]butane-1-sulfonamide (2; R(F) = C4F9), containing an embedded amide and a sulfonamide group, respectively, between the short perfluoroalkyl chain (R(F) with C < 6) and the syloxanic moiety. The obtained FSAM-modified/ITO systems were characterized by X-ray photoelectron spectroscopy (XPS), contact angle (CA), surface energy measurements, and electrochemical impedance spectroscopy (EIS) and compared to ITO modified with a 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyltriethoxysilane (3; R(F) = C6F13), with the perfluoroalkyl group linked to the syloxanic moiety through a simple hydrocarbon chain. The results obtained show that the presence of the -NHCO- and -NHSO2- groups have a different mode of action and, with the former, despite the short perfluoroalkyl chain, the ITO-1 system presents a CA (Θ(water )= 113.5°) and surface energy (γl = 14.0 mJ m(-2)) typical of amphiphobic materials. These properties can be exploited in a variety of applications, such as self-cleaning, anti-fouling, and anti-fingerprint coatings, and in advanced microelectronic components.

Efficient photoactivated hydrogen evolution promoted by CuxO-gCN-TiO2-Au (x = 1,2) nanoarchitectures.

In this work, we propose an original and potentially scalable synthetic route for the fabrication of CuxO-gCN-TiO2-Au (x = 1,2) nanoarchitectures, based on Cu foam anodization, graphitic carbon nitride liquid-phase deposition, and TiO2/Au sputtering. A thorough chemico-physical characterization by complementary analytical tools revealed the formation of nanoarchitectures featuring an intimate contact between the system components and a high dispersion of gold nanoparticles. Modulation of single component interplay yielded excellent functional performances in photoactivated hydrogen evolution, corresponding to a photocurrent of ≈-5.7 mA cm-2 at 0.0 V vs. the reversible hydrogen electrode (RHE). These features, along with the very good service life, represent a cornerstone for the conversion of natural resources, as water and largely available sunlight, into added-value solar fuels.

Supported F-doped alpha-Fe2O3 nanomaterials: synthesis, characterization and photo-assisted H2 production.

Supported fluorine-doped alpha-Fe2O3 nanomaterials were synthesized by Plasma Enhanced-Chemical Vapor Deposition (PE-CVD) at temperatures between 300 and 500 degrees C, using a fluorinated iron(II) diketonate-diamine compound as a single-source precursor for both Fe and F. The system structure, morphology and composition were thoroughly investigated by various characterization techniques, highlighting the possibility of controlling the fluorine doping level by varying the sole growth temperature. Photocatalytic H2 production from water/ethanol solutions under simulated solar irradiation evidenced promising gas evolution rates, candidating the present PE-CVD approach as a valuable strategy to fabricate highly active supported materials.

Controllable Anchoring of Graphitic Carbon Nitride on MnO2 Nanoarchitectures for Oxygen Evolution Electrocatalysis.

The design and fabrication of eco-friendly and cost-effective (photo)electrocatalysts for the oxygen evolution reaction (OER) is a key research goal for a proper management of water splitting to address the global energy crisis. In this work, we focus on the preparation of supported MnO2/graphitic carbon nitride (g-CN) OER (photo)electrocatalysts by means of a novel preparation strategy. The proposed route consists of the plasma enhanced-chemical vapor deposition (PE-CVD) of MnO2 nanoarchitectures on porous Ni scaffolds, the anchoring of controllable g-CN amounts by an amenable electrophoretic deposition (EPD) process, and the ultimate thermal treatment in air. The inherent method versatility and flexibility afforded defective MnO2/g-CN nanoarchitectures, featuring a g-CN content and nano-organization tunable as a function of EPD duration and the used carbon nitride precursor. Such a modulation had a direct influence on OER functional performances, which, for the best composite system, corresponded to an overpotential of 430 mV at 10 mA/cm2, a Tafel slope of ≈70 mV/dec, and a turnover frequency of 6.52 × 10-3 s-1, accompanied by a very good time stability. The present outcomes, comparing favorably with previous results on analogous systems, were rationalized on the basis of the formation of type-II MnO2/g-CN heterojunctions, and yield valuable insights into this class of green (photo)electrocatalysts for end uses in solar-to-fuel conversion and water treatment.

Interplay between coordination sphere engineering and properties of nickel diketonate-diamine complexes as vapor phase precursors for the growth of NiO thin films.

NiO-based films and nanostructured materials have received increasing attention for a variety of technological applications. Among the possible strategies for their fabrication, atomic layer deposition (ALD) and chemical vapor deposition (CVD), featuring manifold advantages of technological interest, represent appealing molecule-to-material routes for which a rational precursor design is a critical step. In this context, the present study is focused on the coordination sphere engineering of three heteroleptic Ni(II) ß-diketonate-diamine adducts of general formula [NiL2TMEDA] [L = 1,1,1-trifluoro-2,4-pentanedionate (tfa), 2,2-dimethyl-6,6,7,7,8,8,8-heptafluoro-3,5-octanedionate (fod) or 2,2,6,6-tetramethyl-3,5-heptanedionate (thd), and TMEDA = N,N,N',N'-tetramethylethylenediamine]. Controlled variations in the diketonate structure are pursued to investigate the influence of steric hindrance and fluorination degree on the chemico-physical characteristics of the compounds. A multi-technique investigation supported by density functional calculations highlights that all complexes are air-insensitive and monomeric and that their thermal properties and fragmentation patterns are directly dependent on functional groups in the diketonate ligands. Preliminary thermal CVD experiments demonstrate the precursors' suitability for the obtainment of NiO films endowed with flat and homogeneous surfaces, paving the way to future implementation for CVD end-uses.

Insights into the Photoelectrocatalytic Behavior of gCN-Based Anode Materials Supported on Ni Foams.

Graphitic carbon nitride (gCN) is a promising n-type semiconductor widely investigated for photo-assisted water splitting, but less studied for the (photo)electrochemical degradation of aqueous organic pollutants. In these fields, attractive perspectives for advancements are offered by a proper engineering of the material properties, e.g., by depositing gCN onto conductive and porous scaffolds, tailoring its nanoscale morphology, and functionalizing it with suitable cocatalysts. The present study reports on a simple and easily controllable synthesis of gCN flakes on Ni foam substrates by electrophoretic deposition (EPD), and on their eventual decoration with Co-based cocatalysts [CoO, CoFe2O4, cobalt phosphate (CoPi)] via radio frequency (RF)-sputtering or electrodeposition. After examining the influence of processing conditions on the material characteristics, the developed systems are comparatively investigated as (photo)anodes for water splitting and photoelectrocatalysts for the degradation of a recalcitrant water pollutant [potassium hydrogen phthalate (KHP)]. The obtained results highlight that while gCN decoration with Co-based cocatalysts boosts water splitting performances, bare gCN as such is more efficient in KHP abatement, due to the occurrence of a different reaction mechanism. The related insights, provided by a multi-technique characterization, may provide valuable guidelines for the implementation of active nanomaterials in environmental remediation and sustainable solar-to-chemical energy conversion.

Hybrid polyoxotungstates as functional comonomers in new cross-linked catalytic polymers for sustainable oxidation with hydrogen peroxide.

Anchoring terminal octenyl tails on molecular polyoxotungstates yield polymerizable organic-inorganic monomers with formula [{CH(2)=CH(CH(2))(6)Si}(x)O(y)SiW(w)O(z)](4-) [x = 2, w = 11, y = 1, z = 39 (1); x = 2, w = 10, y = 1, z = 36 (2); and x = 4, w = 9, y = 3, z = 34 (3)]. These molecular hybrids can use aqueous hydrogen peroxide to catalyze the selective oxidation of organic sulfides in CH(3)CN. Copolymerization of 1-3 with methyl methacrylate and ethylene glycol dimethacrylate leads to porous materials with a homogeneous distribution of the functional monomers, as indicated by converging evidence from FTIR spectroscopy and electronic microscopy. The catalytic polymers activate hydrogen peroxide for oxygen transfer, as demonstrated by the quantitative and selective oxidation of methyl p-tolyl sulfide, which was screened as model substrate. The hybrid material containing monomer 2 was also tested in n-octane to evaluate its potential for the oxidation and removal of dibenzothiophene, a well-known gasoline contaminant.

Vapor-phase fabrication of ß-iron oxide nanopyramids for lithium-ion battery anodes.

The other polymorph: A vapor-phase route for the fabrication of ß-Fe(2)O(3) nanomaterials on Ti substrates at 400-500 °C is reported. For the first time, the ß polymorph is tested as anode for lithium batteries, exhibiting promising performances in terms of Li storage and rate capability.

CuO/ZnO nanocomposite gas sensors developed by a plasma-assisted route.

CuO/ZnO nanocomposites were synthesized on Al(2)O(3) substrates by a hybrid plasma-assisted approach, combining the initial growth of ZnO columnar arrays by plasma-enhanced chemical vapor deposition (PE-CVD) and subsequent radio frequency (RF) sputtering of copper, followed by final annealing in air. Chemical, morphological, and structural analyses revealed the formation of high-purity nanosystems, characterized by a controllable dispersion of CuO particles into ZnO matrices. The high surface-to-volume ratio of the obtained materials, along with intimate CuO/ZnO intermixing, resulted in the efficient detection of various oxidizing and reducing gases (such as O(3), CH(3)CH(2)OH, and H(2)). The obtained data are critically discussed and interrelated with the chemical and physical properties of the nanocomposites.

Ag/ZnO nanomaterials as high performance sensors for flammable and toxic gases.

Ag/ZnO nanocomposites supported on polycrystalline Al2O3 were synthesized by an unprecedented approach combining plasma enhanced chemical vapor deposition (PE-CVD) of ZnO matrices and the subsequent deposition of Ag nanoparticles (NPs) by radio frequency (RF) sputtering. The system structure, composition and morphology were investigated by glancing incidence x-ray diffraction (GIXRD), secondary ion mass spectrometry (SIMS), field emission scanning electron microscopy (FE-SEM) and energy dispersive x-ray spectroscopy (EDXS). A tailored dispersion and distribution of silver particles could be obtained under mild conditions by the sole variation of the sputtering time. Gas sensing properties toward flammable and toxic gases, both reducing (CH3CH2OH, CH3COCH3) and oxidizing (O3), were investigated in the temperature range 100-400 °C. Beside the high sensitivity, the developed sensors exhibited a response proportional to Ag content, thanks to catalytic and electronic effects promoted by silver NPs. In addition, discrimination between oxidizing and reducing analytes was enabled by a suitable choice of the adopted working temperature.

F-Doped Co3O4 photocatalysts for sustainable H2 generation from water/ethanol.

p-Type Co(3)O(4) nanostructured films are synthesized by a plasma-assisted process and tested in the photocatalytic production of H(2) from water/ethanol solutions under both near-UV and solar irradiation. It is demonstrated that the introduction of fluorine into p-type Co(3)O(4) results in a remarkable performance improvement with respect to the corresponding undoped oxide, highlighting F-doped Co(3)O(4) films as highly promising systems for hydrogen generation. Notably, the obtained yields were among the best ever reported for similar semiconductor-based photocatalytic processes.

Tailored vapor-phase growth of Cu(x)O-TiO2 (x = 1, 2) nanomaterials decorated with Au particles.

We report on the fabrication of Cu(x)O-TiO(2) (x = 1, 2) nanomaterials by an unprecedented vapor-phase approach. The adopted strategy involves the growth of porous Cu(x)O matrices by means of chemical vapor deposition (CVD), followed by the controlled dispersion of TiO(2) nanoparticles. The syntheses are performed on Si(100) substrates at temperatures of 400-550 °C under wet oxygen atmospheres, adopting Cu(hfa)(2)·TMEDA (hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate; TMEDA = N,N,N',N'-tetramethylethylenediamine) and Ti(O-(i)Pr)(2)(dpm)(2) (O-(i)Pr = isopropoxy; dpm = 2,2,6,6-tetramethyl-3,5-heptanedionate) as copper and titanium precursors, respectively. Subsequently, finely dispersed gold nanoparticles are introduced in the as-prepared systems via radio frequency (RF)-sputtering under mild conditions. The synthesis process results in the formation of systems with chemical composition and nano-organization strongly dependent on the nature of the initial Cu(x)O matrix and on the deposited TiO(2) amount. The decoration with low-size gold clusters paves the way to the engineering of hierarchically organized nanomaterials.

Surface-driven porphyrin self-assembly on pre-activated Si substrates.

Self-assembled molecular thin films of melamine-bridged bis-porphyrin dyad, both in free form, P(H2)P(H2), or as Zn(II) metallated complex, P(Zn)P(Zn), were deposited on crystalline Si(100) by soaking or drop-casting techniques. The influence of the adopted preparation methodology, the substrate surface pre-activation procedure and the used solvent (THF or CHCl3) on the morphology and surface coverage of the resulting films was investigated by FE-SEM (Field Emission-Scanning Electron Microscopy) and AFM (Atomic Force Microscopy). The chemical composition and electronic structure of the most promising systems were also addressed by XPS (X-ray Photoelectron Spectroscopy). The results pointed out that an accurate tuning of porphyrin-porphyrin, porphyrin-substrate and porphyrin-solvent molecular interactions allow to tailor the morphogenesis and chemico-physical properties of the final self-assembled films. In addition, preliminary gas sensing tests evidenced the potential of the present porphyrin-based films for the development of new molecular sensing devices.