Self-organized discotic liquid crystals for high-efficiency organic photovoltaics.

Self-organization of liquid crystalline and crystalline-conjugated materials has been used to create, directly from solution, thin films with structures optimized for use in photodiodes. The discotic liquid crystal hexa-peri-hexabenzocoronene was used in combination with a perylene dye to produce thin films with vertically segregated perylene and hexabenzocoronene, with large interfacial surface area. When incorporated into diode structures, these films show photovoltaic response with external quantum efficiencies of more than 34 percent near 490 nanometers. These efficiencies result from efficient photoinduced charge transfer between the hexabenzocoronene and perylene, as well as from effective transport of charges through vertically segregated perylene and hexabenzocoronene pi systems. This development demonstrates that complex structures can be engineered from novel materials by means of simple solution-processing steps and may enable inexpensive, high-performance, thin-film photovoltaic technology.

Flame-sprayed alumina on stainless steel for possible prosthetic application.

Various methods of roughening type 316 stainless steel substrate surfaces for flame-spraying alumina (Al2O3) were investigated and tested for the best alumina-to-metal bond strength. Best strength values were obtained by means of roughening via anodic polarization pitting of the stainless steel. Subsequent in vitro testing indicated a severe loss in bond strength following exposure to aerated Ringer's solution. It is suggested that the utilization of flame-sprayed devices has potential in orthopedic prostheses, but precautions must be observed.

Method of assessing the reproducibility of blood flow measurement: factors influencing the performance of thermodilution cardiac output computers.

Measurements of blood flow by three different makes of thermodilution cardiac output computer in an artificial circulation were analysed by linear regression against absolute flow measured by timed blood volume collection. For each computer the horizontal distance between the 95% confidence limits for a single prediction was calculated at a standard flow rate of 5 litres per minute. This measurement represents the range of flow rates that could give rise to an identical measurement and provides a summary of the reproducibility of the computer's results and its ability to detect a change of flow rate. This measurement was used to evaluate the effect on each computer's performance of pulsatile or continuous flow, injectate volume, and injectate temperature. With continuous flow the optimum results were 1.8, 0.85, and 0.85 litres per minute and with pulsatile flow they were 1.3, 1.05, and 1.65 litres per minute. There was generally a deterioration in performance when pulsatile flow was evaluated. Under the conditions of the experiment optimum performance in both flow modes was obtained with 5 ml of ice cold injectate, but these findings cannot necessarily be extrapolated to the clinical situation. With pulsatile flow the overall range of blood flows that could give rise to identical measurements were for each computer 2.0, 1.5, and 3.1 litres per minute, corresponding to 40, 30, and 62% changes of the standard flow rate of 5 litres per minute.

Bioactivity of sol-gel derived organically modified silicates: part i: in vitro examination.

Bioactivity was investigated for several organically modified silicates (Ormosils) prepared through sol-gel processes. Ca(II)-free samples were biocompatible only, but Ca(II)containing samples were bioactive and deposited apatite during immersion in a simulated body fluid. The ease of silanol (Si-OH) group formation on the ormosils was considered a predominant factor controlling the bioactivity, while the effect of dissolved Ca(II) ions to increase the degree of supersaturation in the simulated body fluid is secondary.

Reproducibility of linear cardiac output measurement by Doppler ultrasound alone.

Inclusion of a pig aorta in an artificial circulation with pulsed blood flow allowed correlation of minute distance, measured in the aorta by Doppler ultrasound, and absolute blood flow, measured by timed blood-volume collection. The correlation coefficient was 0.99 with a standard error of prediction that was 5.4% of the minute distance predicted at a standard flow rate of 5 litres per minute. The horizontal distance between 95% confidence limits for a single prediction expressed as a percentage of 5 litres per minute was 33%, and this corresponded to the range of flow rates of 1.65 litres per minute that could give rise to the same measurement. In 142 patients duplicate measurements of minute distance were made with repositioning of the ultrasound transducer between recordings. The mean difference between paired readings, expressed as a percentage of the average (SD) of each pair was 5.4 (4.7)%. Thus, the non-invasive measurement of linear cardiac output by Doppler ultrasound is similarly reproducible in vitro and in vivo and compares favourably with the measurement of volumetric cardiac output by thermodilution.

Predominant VH genes expressed in innate antibodies are associated with distinctive antigen-binding sites.

Antibodies to phosphatidylcholine (PtC), a common constituent of mammalian and bacterial cell membranes, represent a large proportion of the natural antibody repertoire in mice. Previous studies of several mouse strains (e.g., C57BL/6) have shown that anti-PtC antibodies are mainly encoded by the VH11 and VH12 immunoglobulin heavy chain variable region gene families. We show here, however, that VH11 and VH12 encode only a small proportion of the anti-PtC antibodies in BALB/c mice. Instead, VHQ52-encoded antibodies predominate in this strain. In addition, two-thirds of the cells expressing VHQ52 family genes use a single gene (which, interestingly, has been previously shown to predominate in the anti-oxazolone response). We also show here that in anti-PtC antibodies from all strains, the distinctive antigen-binding sites associated with VHQ52 differ substantially from those associated with VH11 and VH12. That is, VHQ52-containing transcripts preferentially use the joining region JH4 rather than JH1 and exhibit more diverse complementarity-determining region 3 (CDR3) junctions with more N-region nucleotide additions at the gene segment junctions. Thus, the VH gene family that predominates in the anti-PtC repertoire differs among mouse strains, whereas the distinctive VHDJH rearrangements (CDR3, JH) associated with each VH gene family are similar in all strains. We discuss these findings in the context of a recent hypothesis suggesting that CDR3 structure, independent of VH framework, is sufficient to define the specificity of an antibody.

A photorefractive organically modified silica glass with high optical gain.

Photorefractive materials exhibit a spatial modulation of the refractive index due to redistribution of photogenerated charges in an optically nonlinear medium. As such, they have the ability to manipulate light and are potentially important for optical applications including image processing, optical storage, programmable optical interconnects and simulation of neural networks. Photorefractive materials are generally crystals, polymers and glasses with electro-optic or birefringent properties and noncentrosymmetric structure. Here we report the photorefractive effect in both non-centrosymmetric and centrosymmetric azo-dye-doped silica glasses, in which refractive index gratings that are spatially phase-shifted with respect to the incident light intensity pattern are observed. The effect results from a nonlocal response of the material to optical illumination, and enables the transfer of energy between two interfering light beams (asymmetric two-beam coupling). Although the writing time for the present grating is relatively slow, we have achieved a two-beam coupling optical gain of 188 cm(-1) in the centrosymmetric glasses, and a gain of 444 cm(-1) in the non-centrosymmetric structures. The latter are fabricated using a corona discharge process to induce a permanent arrangement of azo-dye chromophores.

Frequent occurrence of identical heavy and light chain Ig rearrangements.

Single-cell PCR analyses of expressed Ig H and L chain sequences presented here show that certain rearrangements occur repeatedly and account for a major segment of the well-studied repertoire of B-1 cell autoantibodies that mediate the lysis of bromelain-treated mouse erythrocytes, i.e. antibodies reactive with phosphatldyicholine (PtC). We repeatedly isolated at least 10 different types of VH region rearrangements, involving three distinct germline genes, among FACS-sorted PtC-binding B-1 cells from three strains of mice (C57BL/6J, BALB/c and C.B-17). The predominant rearrangement, VH11-DSP-JH1 (VH11 type 1), has been previously found in anti-PtC hybridomas in several studies. We show that within each of six mice from two strains (C57BL/6J and BALB/c), unique instances of IgH/IgL pairing arose either from different B cell progenitors prior to IgH rearrangement or from pre-B cells which expanded after IgH rearrangement but prior to IgL rearrangement. Together with other recurrent rearrangements described here, our findings demonstrate that clonal expansion of mature B cells cannot account for all repeated rearrangements. As suggested by initial studies of dominant idiotype expression, these findings confirm that clonal expansion is only one of the mechanisms contributing to the establishment of recurrent rearrangements.

Fluorescence scanning near-field optical microscopy of polyfluorene composites.

Fluorescence scanning near-field optical microscopy (SNOM) is used to investigate binary polyfluorene-based composites of varying composition. The samples investigated contain blends of the polymer poly(9,9'-dioctylfluorene-cobenzothiadiazole), F8BT, with similar polyfluorenes of wider band gap. Images acquired from a film containing 50% by weight F8BT exhibit a high degree of correlation between the topography and fluorescence, with an F8BT-rich phase which protrudes from the surface of the film forming isolated regions with sizes from hundreds of nanometres to several micrometres. A film containing 10% by weight F8BT also has micrometre-size F8BT-rich regions, but also present are small and locally varying proportions of F8BT in the other polyfluorene component phase, indicating a hierarchy of phases within this sample. The fluorescence and topographic images of a third sample studied, containing 90% by weight F8BT, display no correlation, demonstrating that it is not always appropriate to use topographic information to determine the phase structure within polymer blends. The fluorescence SNOM images acquired from these samples are able to assist our understanding of the photovoltaic efficiency of devices fabricated from these films, which are governed by the extent of the interfacial area between these two constituent polymers.