Terahertz continuous wave spectroscopy: a portable advanced method for atmospheric gas sensing.

Motivated by the increasing demand to monitor the air-quality, our study proved the feasibility of a new compact and portable experimental approach based on Terahertz (THz) continuous wave high resolution spectroscopy, to detect the presence of the air's contaminants as greenhouse gases (GHG) and volatile organic compounds (VOCs). In this specific work, we first characterized, determining their molar absorption coefficient in the spectral region (0.06-1.2) THz, the pure optical response of the vapor of five VOCs: methanol, ethanol, isopropanol, 1-butanol and 2-butanol. In particular, 1-butanol and 2-butanol are characterized for the first time in literature at THz frequencies. Then we studied the optical response of their mixtures achieved with ambient air and ethanol. The results show that it is possible for a differentiation of single components by describing their spectral absorption in terms of the linear combination of pure compounds absorption. This proof of concept for this apparatus study and set-up paves the way to the use of THz Continuous wave high resolution spectroscopy for the environmental tracking of air pollutants.

In Situ Anodically Oxidized BMIm-BF4: A Safe and Recyclable BF3 Source.

The anodic oxidation of 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF4) efficiently generates BF3 from BF4-. This Lewis acid, strongly bound to the ionic liquids, can be efficiently used in classical BF3-catalyzed reactions. We demonstrated the BF3/BMIm-BF4 reactivity in four reactions, namely, a domino Friedel-Crafts/lactonization of phenols, the Povarov reaction, the Friedel-Crafts benzylation of anisole, and the multicomponent synthesis of tetrahydro-11H-benzo[a]xanthen-11-ones. In comparison with literature data using BF3-Et2O in organic solvents, in all the presented cases, analogous or improved results were obtained. Moreover, the noteworthy advantages of the developed method are the in situ generation of BF3 (no storing necessity) in the required amount, using only the electron as redox reagent, and the recycling of BMIm-BF4 for multiple subsequent runs.

The Electrogenerated Cyanomethyl Anion: An Old Base Still Smart.

The cathodic reduction of acetonitrile solutions containing a tetraalkylammonium salt leads to the formation of the cyanomethyl anion (-CH2CN, cyanomethanide). This electrolysis can be carried out under very simple experimental conditions (constant-current electrolyses), using various cathodic materials, controlling the amount of base by simply controlling the amount of charge. Despite the fact that the mechanism for this electrochemical reaction is still debated (and it depends on the cathodic material), the outcome of the electrolysis is the formation of a strong base, -CH2CN (pKa 31.3 for acetonitrile in DMSO). The chemical behavior of this electrogenerated base (EGB) strongly depends on its counterion, which in this case is a tetraalkylammonium cation, with a low charge density and thus not coordinated. The very weak interaction between R4N+ and -CH2CN renders the cyanomethyl anion a "naked" ion, and thus highly reactive. In particular, the cyanomethyl anion can react as a base and as a nucleophile. In the first case, it behaves as a strong base and, after deprotonation of a weak acidic substrate, transforms itself into a solvent molecule, acetonitrile, thus generating no byproducts. In the second case, the reactivity as a nucleophile of the cyanomethyl anion obviously depends on the reaction partner. When an electrophile is present in the reaction mixture, a cyanomethylation is obtained (e.g., with aromatic aldehydes, possessing no acidic hydrogen atoms, which undergo nucleophilic attack on the carbonyl carbon atom by -CH2CN); on the contrary, when no reagent is present other than acetonitrile and tetraalkylammonium salt, an attack on the parent molecule leads to the acetonitrile dimer, 3-aminocrotononitrile, which in turn can behave as a base and/or as a nucleophile. In this regard, some authors report that it is preferable to carry out the electrogeneration of the cyanomethyl anion under different experimental conditions, i.e., using an undivided cell and a sacrificial magnesium anode. In this way, a Grignard-type reagent is formed (Mg(CH2CN)2) which highly stabilizes the cyanomethyl anion, preventing its dimerization. It should be noted that in our laboratory the electrogenerated tetraalkylammonium cyanomethanide was extensively used in various reactions (both acid-base and nucleophile-electrophile, vide infra), and in almost no case, the amount of acetonitrile dimer formed exceeded 5%, confirming the validity of this electrochemical methodology to generate a very efficient base. Moreover, when in the reaction mixture both a weak acid and an electrophile are present, the prevalent reactivity of the cyanomethyl anion is as a base, leaving the possibility of a cyanomethylation reaction to those cases in which no acidic substrate is present. We have successfully used the electrogenerated cyanomethyl anion in many base-induced reactions, as the synthesis of the ß-lactam ring (chiral or not), the insertion of carbon dioxide into amines and amino alcohols, the activation of elemental sulfur and insertion into carbonyl compounds, the selective alkylation of difunctional compounds, etc.

Synthesis and characterization of new D-π-A and A-π-D-π-A type oligothiophene derivatives.

In this work, we present a series of newly synthesized conjugated oligothiophene derivatives, with different numbers of central thiophene units, and different donor/acceptor architectures. Electrochemical and spectroscopic data have also been reported. We used thiophene or bithiophene as central donor core units, 3-octylthiophenes as π-bridge and solubilizing sub-units, and ethyl cyanoacetate or rhodanine moieties as acceptor end groups, in order to get D-π-A and A-π-D-π-A molecular architectures. The length of the synthesized oligothiophenes ranges from three to eight thiophene units, a variety that is sufficient to put in evidence different optical and electrochemical characteristics as well as semiconducting characteristics. Oligothiophene compounds can be regarded not only as models for the study of structure-property relationships relative to polythiophenes, but also they present a large number of applications in the field of organic electronics (i.e.: as donors in bulk-heterojunction solar cells and hole-transporting layer materials in perovskite solar cells, among others).

Graphene Oxide: A Smart (Starting) Material for Natural Methylxanthines Adsorption and Detection.

Natural methylxanthines, caffeine, theophylline and theobromine, are widespread biologically active alkaloids in human nutrition, found mainly in beverages (coffee, tea, cocoa, energy drinks, etc.). Their detection is thus of extreme importance, and many studies are devoted to this topic. During the last decade, graphene oxide (GO) and reduced graphene oxide (RGO) gained popularity as constituents of sensors (chemical, electrochemical and biosensors) for methylxanthines. The main advantages of GO and RGO with respect to graphene are the easiness and cheapness of synthesis, the notable higher solubility in polar solvents (water, among others), and the higher reactivity towards these targets (mainly due to - interactions); one of the main disadvantages is the lower electrical conductivity, especially when using them in electrochemical sensors. Nonetheless, their use in sensors is becoming more and more common, with the obtainment of very good results in terms of selectivity and sensitivity (up to 5.4 × 10-10 mol L-1 and 1.8 × 10-9 mol L-1 for caffeine and theophylline, respectively). Moreover, the ability of GO to protect DNA and RNA from enzymatic digestion renders it one of the best candidates for biosensors based on these nucleic acids. This is an up-to-date review of the use of GO and RGO in sensors.

Opportunities for Low Cost Processing of Erbium 8-Quinolinolates for Active Integrated Photonic Applications.

Erbium-doped organic emitters are promising active materials for Photonic Integrated Circuits (PICs) due to their emission shown at 1550 nm combined to the potential low cost processing. In particular, Erbium Quinoline (ErQ) gained a strong interest in the last decade for the good emission efficiency. This contribution reports the results derived from the application of ErQ as active core material within a buried optical waveguide, following the development of a purposed optical process to control the refractive index of ErQ and then to define a patterned structure from a single thin film deposition step. The reported results show the potential of Er-doped organic materials for low cost processing and application to planar PICs.

Effects of polyphenol compounds on influenza A virus replication and definition of their mechanism of action.

A set of polyphenol compounds was synthesized and assayed for their ability in inhibiting influenza A virus replication. A sub-set of them showed low toxicity. The best compounds within this sub-set were 4 and 6g, which inhibited the viral replication in a dose-dependent manner. The antiviral activity of these molecules was demonstrated to be caused by their interference with intracellular pathways exploited for viral replication: (1) MAP kinases controlling nuclear-cytoplasmic traffic of viral ribonucleoprotein complex; (2) redox-sensitive pathways, involved in maturation of viral hemagglutinin protein.

Naphthalimide Imidazolium-Based Supramolecular Hydrogels as Bioimaging and Theranostic Soft Materials.

1,8-Naphthalimide-based imidazolium salts differing for the alkyl chain length and the nature of the anion were synthesized and characterized to obtain fluorescent probes for bioimaging applications. First, their self-assembly behavior and gelling ability were investigated in water and water/dimethyl sulfoxide binary mixtures. Only salts having longer alkyl chains were able to give supramolecular hydrogels, whose properties were investigated by using a combined approach of fluorescence, resonance light scattering, and rheology measurements. Morphological information was obtained by scanning electron microscopy. In addition, conductive properties of organic salts in solution and gel state were analyzed. Imidazolium salts were successfully tested for their possible application as bioimaging and cytotoxic agents toward three cancer cell lines and a nontumoral epithelial cell line. Characterization of their behavior was performed by MTT and cell-based assays. Finally, the biological activity of hydrogels was also investigated. Collectively, our findings showed that naphthalimide-based imidazolium salts are promising theranostic agents and they were able to preserve their biological properties also in the gel phase.

Novel Fast Identification and Determination of Free Polyphenols in Untreated Craft Beers by HPLC-PDA-ESI-MS/MS in SIR Mode.

Many analytical methods for polyphenol determination in food and beverages can be found in the literature, but most of them need time-consuming sample pretreatment. Conversely, methods are missing for a rapid screening of non-pre-treated samples, with useful application in the agri-food industry, from process control to fraud. Selected ion recording mass mode after liquid chromatographic separation was used for the detection and quantification of free polyphenols in three craft beers, after just degassing, filtering, and diluting the beer samples with the mobile phase prior to the analysis. Fourteen polyphenols including hydroxybenzoic acids, hydroxycinnamic acids, and flavonols were chosen as standards. Nine of them were identified and quantified in at least one of the analyzed craft beers, despite the low content and the complexity of the samples. Depending on the analyte, 80-7 µg/L as the limit of detection (LOD) and 240-30 µg/L as the limit of quantification (LOQ) were found. Satisfactory results for interday and intraday precisions, accuracy, recovery, and matrix effect were found. The one-factor analysis of variance (ANOVA) on the three different craft beers was statistically significant, with P < 0.05. The electrospray ionization mass fingerprinting of the same non-pre-treated craft beers was also investigated for wider characterization. Diagnostic ions were found and identified as deriving from oligosaccharides, organic acids, and amino acids.

NHC in Imidazolium Acetate Ionic Liquids: Actual or Potential Presence?

Ionic liquids (ILs) are considered in the majority of cases green solvents, due to their virtually null vapor pressure and to the easiness in recycling them. In particular, imidazolium ILs are widely used in many fields of Chemistry, as solvents or precursors of N-heterocyclic carbenes (NHCs). The latter are easily obtained by deprotonation of the C2-H, usually using strong bases or cathodic reduction. Nevertheless, it is known that weaker bases (e.g., triethylamine) are able to promote C2-H/D exchange. From this perspective, the possibility of deprotonating C2-H group of an imidazolium cation by means of a basic counter-ion was seriously considered and led to the synthesis of imidazolium ILs spontaneously containing NHCs. The most famous of this class of ILs are N,N'-disubstituted imidazolium acetates. Due to the particular reactivity of this kind of ILs, they were appointed as "organocatalytic ionic liquids" or "proto-carbenes." Many papers report the use of these imidazolium acetates in organocatalytic reactions (i. e., catalyzed by NHC) or in stoichiometric NHC reactions (e.g., with elemental sulfur to yield the corresponding imidazole-2-thiones). Nevertheless, the actual presence of NHC in N,N'-disubstituted imidazolium acetate is still controversial. Moreover, theoretical studies seem to rule out the presence of NHC in such a polar environment as an IL. Aim of this Mini Review is to give the reader an up-to-date overview on the actual or potential presence of NHC in such an "organocatalytic ionic liquid," both from the experimental and theoretical point of view, without the intent to be exhaustive on N,N'-disubstituted imidazolium acetate applications.

Electrode surface modification by a spirobifluorene derivative. An XPS and electrochemical investigation.

Ordered thin layers of a spirobifluorene derivative containing an amino group were formed by grafting them onto a self-assembled monolayer (SAM) of 11-mercaptoundecanoic acid (11-MUA) on gold. Either physical (H-bonding) or chemical bonding (activated by EDCl) was investigated. X-ray photoelectron spectroscopy and electrochemical impedance spectroscopy confirmed that both methods can be used to effectively graft 2-amino-9,9'-spirobifluorene molecules onto the SAM surface, giving high surface coverages, with a significantly higher packing in the case of chemisorbed films. EIS measurements also showed that the covalently bonded spirobifluorene SAMs act as an effective barrier to both ion penetration and heterogeneous electron transfer.