RESUMO
It remains a challenge to develop efficient noble metal-free electrocatalysts for the oxygen reduction reaction (ORR) in various renewable energy systems. Single atom catalysts have recently drawn great attention as promising candidates both due to their high activity and their utmost atom utilization for electrocatalytic ORR. Herein, the synthesis of an efficient ORR electrocatalyst that is composed of N-doped mesoporous carbon and a high density (4.05 wt%) of single Fe atoms via pyrolysis Fe-conjugated polymer is reported. Benefiting from the abundant atomic Fe-N4 sites on its conductive, mesoporous carbon structures, this material exhibits an excellent electrocatalytic activity for ORR, with positive onset potentials of 0.93 and 0.98 V in acidic and alkaline media, respectively. Its electrocatalytic performance for ORR is also comparable to that of Pt/C (20 wt%) in both media. Furthermore, it electrocatalyzes the reaction almost fully to H2 O (or barely to H2 O2 ). Additionally, it is durable and tolerates the methanol crossover reaction well. Furthermore, a proton exchange membrane fuel cell and a zinc-air battery assembled using it on their cathode deliver high maximum power densities (320 and 91 mW cm-2 , respectively). Density functional theory calculation reveals that the material's decent electrocatalytic performance for ORR is due to its atomically dispersed Fe-N4 sites.
RESUMO
Increasingly, oil spills and industrial discharges are wreaking havoc on the water environment; in order to efficiently separate oil and water from sewage containing oil or organic solvents, a novel porous polymer (P(EHA-co-BA)) was prepared by Pickering high internal phase emulsion (HIPE) template method. To obtain polyHIPE with better oil/water separation capacities, octadecyltrichlorosilane (OTS)-modified carbon nanotubes (CNTs) and surfactants were used as costabilizers for HIPE, which improved the stability of HIPE as well as the mechanical properties and the separation efficiency of polyHIPE. In the presence of 1 wt % OTS-CNT adding in the oil phase, 1%OTS-CNT polyHIPE has high porosity (92.21%), favorable hydrophobicity (a water contact angle of 128°), and excellent mechanical properties. As a result, 1%OTS-CNT polyHIPE has high absorption of oils and oily solvents, e.g., dichloromethane up to 36 g/g, and maintains an absorption efficiency of >97% after 20 reapplications. In the formulation of polyHIPE, cinnamaldehyde (CA) has been added to provide superior antibacterial properties against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). It appears that the novel polyHIPE proposed in this work is a reusable antibacterial porous polymer with promising applications for oil-water separation.
RESUMO
Replacing rare and expensive metal catalysts with inexpensive and earth-abundant ones is currently among the major goals of sustainable chemistry. Herein we report the synthesis of N-, O-, and S-tridoped, polypyrrole-derived nanoporous carbons (NOSCs) that can serve as metal-free, selective electrocatalysts and catalysts for oxygen reduction reaction (ORR) and alcohol oxidation reaction (AOR), respectively. The NOSCs are synthesized via polymerization of pyrrole using (NH4)2S2O8 as oxidant and colloidal silica nanoparticles as templates, followed by carbonization of the resulting S-containing polypyrrole/silica composite materials and then removal of the silica templates. The NOSCs exhibit good catalytic activity toward ORR with low onset potential and low Tafel slope, along with different electron-transfer numbers, or in other words, different ratios H2O/H2O2 as products, depending on the relative amount of colloidal silica used as templates. The NOSCs also effectively catalyze AOR at relatively low temperature, giving good conversions and high selectivity.
RESUMO
Understanding and utilizing the dynamic changes of electrocatalysts under working conditions are important for advancing the sustainable hydrogen production. Here, we for the first time report that Cr-doping can promote the in situ reconstruction of a self-supported Ni3N electrocatalyst (Cr-Ni3N/NF) during oxygen and hydrogen evolution reactions (OER and HER), and therefore improve the electrocatalytic water splitting performance. As identified by in situ measurements and theoretical calculations, Cr-doping enhances OH- adsorption during OER at anode and thereby boosts the transformation of Ni3N pre-catalysts to defect-rich nickel oxyhydroxide (NiOOH) active species. Meanwhile, it facilitates the generation of Ni3N/Ni(OH)2 at cathodes due to effective H2O activation, leading to the fast HER kinetics on the Ni3N/Ni(OH)2 interfaces. Notably, the optimal Cr-Ni3N/NF displays good OER and HER performance in 1.0 M KOH electrolytes, with low overpotentials of 316 and 188 mV to achieve the current density of ± 100 mA cm-2, respectively. Benefiting from its bi-functionality and self-supporting property, an alkaline electrolyzer equipped with Cr-Ni3N/NF as both anode and cathode affords a small voltage of 1.72 V at 100 mA cm-2, along with 100 h operation stability. Elucidating that Cr-doping can boost in situ reconfiguration and consequently the electrocatalytic activity, this work would shed new light on the rational design and synthesis of electrocatalysts via directional reconstructions.
RESUMO
Multi-phase interfaces are promising for surmounting the energy barriers of electrochemical CO2 reduction involving multiple electron transfer steps, but challenges still remain in constructing interfacial micro-structures and unraveling their dynamic changes and working mechanism. Herein, highly active Ag/Cu/Cu2O heterostructures are in situ electrochemically restructured from Ag-incorporating HKUST-1, a Cu-based metal-organic framework (MOF), and accomplish efficient CO2-to-C2H4 conversion with a high faradaic efficiency (57.2% at -1.3 V vs. RHE) and satisfactory stability in flow cells, performing among the best of recently reported MOFs and their derivatives. The combination of in/ex situ characterizations and theoretical calculations reveals that Ag plays a crucial role in stabilizing Cu(i) and increasing the CO surface coverage, while the active Cu/Cu2O interfaces significantly reduce the energy barrier of C-C coupling toward the boosted ethylene production. This work not only proves MOFs as feasible precursors to derive efficient electrocatalysts on site, but also provides in-depth understanding on the working interfaces at an atomic level.
RESUMO
The high-efficient and low-cost oxygen evolution reaction (OER) is decisive for applications of oxide catalysts in metal-air batteries, electrolytic cells, and energy-storage technologies. Delicate regulations of active surface and catalytic reaction pathway of oxide materials principally determine thermodynamic energy barrier and kinetic rate during catalytic reactions, and thus have crucial impacts on OER performance. Herein, a synergistic modulation of catalytically active surface and reaction pathway through facile topotactic transformations switching from perovskite (PV) LaNiO3.0 film to infinite-layer (IL) LaNiO2.0 film is demonstrated, which absolutely contributes to improving OER performance. The square-planar NiO4 coordination of IL-LaNiO2.0 brings about more electrochemically active metal (Ni+ ) sites on the film surface. Meanwhile, the oxygen-deficient driven PV- IL topotactic transformations lead to a reaction pathway converted from absorbate evolution mechanism to lattice-oxygen-mediated mechanism (LOM). The non-concerted proton-electron transfer of LOM pathway, evidenced by the pH-dependent OER kinetics, further boosts the OER activity of IL-LaNiO2.0 films. These findings will advance the in-depth understanding of catalytic mechanisms and open new possibilities for developing highly active perovskite-derived oxide catalysts.
RESUMO
Nowadays, due to the worldwide growth demand of energy, over consumption of fossil fuel as well as their accompanying increased negative environmental impacts, the development of renewable energy systems, such as fuel cells and water electrolyzers, is becoming one of the "holy grail" for researchers. However, their large-scale applications have been severely limited by precious and unsustainable noble-metal electrocatalysts. Hence, it is highly desirable to develop robust electrocatalysts composed exclusively of low-cost and earth-abundant elements, to reduce or replace expensive and scarce noble-metals. Carbon-based nanomaterials, including heteroatoms-doped carbons and carbon-encapsulated metal materials, have recently attracted great interests because they show remarkable electrocatalytic performance and long-term stability for energy-related reactions, such as oxygen reduction reaction (ORR), hydrogen and oxygen evolution reactions (OER), hydrazine oxidation reaction (HzOR), etc. This review summarizes the recent progress in heteroatoms-doped carbon and carbon-encapsulated metal materials, highlighting the promise as cost-efficient electrocatalysts. Finally, a prospective on the future development of these promising materials is offered.
RESUMO
We demonstrate a lamellar NiMoCo@CuS catalyst, showing not only an excellent catalyst performance (η100@72 mV and a Tafel slope of 47 mV dec-1), but also a good stability (20 mA cm-2@30 hours), outperforming the NiMo system and noble Pt.
RESUMO
Owing to its excellent chemical stability and low cost, titanium dioxide (TiO2) has been widely studied as a photoanode for photoelectrochemical (PEC) water splitting. However, TiO2's practical applications in solar energy-to-synthetic fuel conversion processes have been constrained by its inherently poor ability to transport photogenerated electrons and holes. In this paper, we report Ta-doped porous TiO2 nanorod arrays on Ta foil (Ta-PTNA) that do not possess this issue and that can thus efficiently photoelectrocatalyze water oxidation, helping the production of H2 (a clean fuel) from water at the expense of solar light. The materials are synthesized by a new, facile synthetic approach involving the hydrothermal treatment of a TiO2 precursor with Ta foil, without seeds and templates, and followed by calcination of the product. Besides serving as a source of Ta dopant atoms, Ta foil is found to play a vital role in the formation of nanopores in the materials. The material obtained with hydrothermal treatment at 180 °C for 10 h (Ta-PTNA-10), in particular, affords very large photocurrent density and very high photoconversion efficiency (0.32% at 0.79 V vs. RHE, which is better than those of many previously reported photocatalysts and â¼4 times larger than that of undoped TiO2 nanorod arrays). Ta-PTNAs' remarkable PEC catalytic performance is found to be due to their nanoporous structure and high electronic conductivity.
RESUMO
Eu3+ ion can be effectively sensitized by Ce3+ ion through an energy-transfer chain of Ce3+-(Tb3+) n-Eu3+, which has contributed to the development of white light-emitting diodes (WLEDs) as it can favor more efficient red phosphors. However, simply serving for WLEDs as one of the multicomponents, the design of the Ce3+-(Tb3+) n-Eu3+ energy transfer is undoubtedly underused. Theoretically, white light can be achieved with extra blue and green emissions released from Ce3+ and Tb3+. Herein, the design of the white light based on these three multicolor luminescence centers has been realized in GdBO3. It is the first time that white light is generated via accurate controls on the Ce3+-(Tb3+) n-Eu3+ energy transfer in such a widely studied host material. Because the thermal quenching rates of blue, green, and red emissions from Ce3+, Tb3+, and Eu3+, respectively, are well-matched in the host, this novel white light exhibits superior color stability and potential application prospect.
RESUMO
TiO2 is one of the most attractive semiconductors for use as a photoanode for photoelectrochemical (PEC) water oxidation. However, the large-scale application of TiO2 photoanodes is restricted due to a short hole diffusion length and low electron mobility, which can be addressed by metal doping and surface decorating. In this paper we report the successful synthesis of hierarchical Ta doped TiO2 nanorod arrays, with nanoparticles on the top (Ta:TiO2), on F-doped tin oxide (FTO) glass by a hydrothermal method, and its application as photoanodes for photoelectrochemical water oxidation. It has been found that the incorporation of Ta5+ in the TiO2 lattice can decrease the diameter of surface TiO2 nanoparticles. Ta:TiO2-140, obtained with a moderate Ta concentration, yields a photocurrent of â¼1.36 mA cm-2 at 1.23 V vs. a reversible hydrogen electrode (RHE) under FTO side illumination. The large photocurrent is attributed to the large interface area of the surface TiO2 nanoparticles and the good electron conductivity due to Ta doping. Besides, the electron trap-free model illustrates that Ta:TiO2 affords higher transport speed and lower electron resistance when under FTO side illumination.
RESUMO
A carbon- and binder-free Ti@Ru material is synthesized through a facile and controllable strategy. A Ti@Ru based Li-O2 battery can effectively avoid the subsidiary reactions, and can be reversibly and continuously cycled for more than 500 cycles with an efficiency ca. 100%, exhibiting an ultra-cycling stability.
RESUMO
Energy migration (energy transfer among identical luminescence centers) is always thought to be related to the concentration quenching in luminescence materials. However, the novel Eu3+-doped Ba6Gd2Ti4O17 phosphor seems to be an exception. In the series of Ba6Gd2(1- x)Ti4O17: xEu3+ ( x = 0.1, 0.3, 0.5, 0.7, and 0.9) phosphors prepared and investigated, no concentration quenching is found. Detailed investigations of the crystal structure and the luminescence properties of Ba6Gd2(1- x)Ti4O17: xEu3+ reveal that the nonoccurrence of concentration quenching is related to the dimensional restriction of energy migration inside the crystal lattices. In Ba6Gd2Ti4O17, directly increasing the number of Eu3+ ions to absorb as much excitation energy as possible allows to achieve a higher brightness. The highly Eu3+-doped Ba6Gd2(1- x)Ti4O17: xEu3+ ( x = 0.9) sample can convert near-UV excitation into red light, whose Commission Internationale de l'Eclairage (CIE) coordinates are (0.64, 0.36) and the color purity can reach up to 94.4%. Moreover, warm white light with the CIE chromaticity coordinates of (0.39, 0.39), the correlated color temperature of 3756 K, and the color rendering index of 82.2 is successfully generated by fabricating this highly Eu3+-doped phosphor in a near-UV light-emitting diode chip together with the green YGAB:Tb3+ and blue BAM:Eu2+ phosphors.
RESUMO
Transition metal oxides caused much attention owing to the scientific interests and potential applications in energy storage systems. In this study, a free-standing three-dimensional (3D) chestnut-like TiO2@α-Fe2O3 core-shell nanostructure (TFN) is rationally synthesized and utilized as a carbon-free electrode for lithium-ion batteries (LIBs). Two new interfaces between anatase TiO2 and α-Fe2O3 are observed and supposed to provide synergistic effect. The TiO2 microsphere framework significantly improves the mechanical stability, while the α-Fe2O3 provides large capacity. The abundant boundary structures offer the possibility for interfacial lithium storage and electron transport. The as-prepared TFN delivers a high capacity of 820 mAh g-1 even after 1000 continuous cycles with a Coulombic efficiency of ca. 99% at a current of 500 mA g-1, which is better than the works reported previously. A thin gel-like SEI (solid electrolyte interphase) film and Fe0 phase yielded during charge/discharge cycling have been confirmed which makes it possible to alleviate the volumetric change and enhance the electronic conductivity. This confirmation is helpful for understanding the mechanism of lithium-ion storage in α-Fe2O3-based materials. The as-prepared free-standing TFN with excellent stability and high capacity can be an appropriate candidate for carbon-free anode material in LIBs.
RESUMO
Nitrogen and oxygen co-doped mesoporous carbons that can serve as metal-free electrocatalysts are synthesized via a novel synthetic route using milled rice as a precursor and colloidal silica as a template. The materials efficiently electrocatalyze the hydrazine oxidation reaction with only a small onset potential, while giving a high peak current density and showing good long-term stability.
RESUMO
The use of renewable resources to make various synthetic materials is increasing in order to meet some of our sustainability challenges. Yeast is one of the most common household ingredients, which is cheap and easy to reproduce. Herein we report that yeast cells can be thermally transformed into hollow, core-shell heteroatom-doped carbon microparticles that can effectively electrocatalyze the oxygen reduction and hydrazine oxidation reactions, reactions that are highly pertinent to fuel cells or renewable energy applications. We also show that yeast cell walls, which can easily be separated from the cells, can produce carbon materials with electrocatalytic activity for both reactions, albeit with lower activity compared with the ones obtained from intact yeast cells. The results reveal that the intracellular components of the yeast cells such as proteins, phospholipids, DNAs and RNAs are indirectly responsible for the latter's higher electrocatalytic activity, by providing it with more heteroatom dopants. The synthetic method we report here can serve as a general route for the synthesis of (electro)catalysts using microorganisms as raw materials.
Assuntos
Carbono/química , Eletroquímica/instrumentação , Saccharomyces cerevisiae/química , Catálise , Parede Celular/química , Eletrodos , OxirreduçãoRESUMO
We demonstrate that polypyrrole-derived nitrogen and oxygen co-doped mesoporous carbons can serve as efficient, metal-free electrocatalysts for hydrazine oxidation reaction, with low overpotential and high current density. The materials' structures and the nature and type of their included dopants, which can be controlled by varying the synthetic conditions, can affect the electrocatalytic properties of the materials.