RESUMO
A 14-electron ternary anionic CBe2 H5 - cluster containing a planar tetracoordinate carbon (ptC) atom is designed herein. Remarkably, it can be stabilized by only two beryllium atoms with both π-acceptor/σ-donor properties and two hydrogen atoms, which means that the conversion from planar methane (transition state) to ptC species (global minimum) requires the substitution of only two hydrogen atoms. Moreover, two ligand H atoms exhibit alternate rotation, giving rise to interesting dynamic fluxionality in this cluster. The electronic structure analysis reveals the flexible bonding positions of ligand H atoms due to C-H localized bonds, highlighting the rotational fluxionality in the cluster, and two CBe2 3c-2e delocalized bonds endow its rare 2σ/2π double aromaticity. Unprecedentedly, the fluxional process exhibits a conversion in the type of bonding (σ bondâπ bond), which is an uncommon fluxional mechanism. The cluster can be seen as an attempt to apply planar hypercoordinate carbon species to molecular motors.
RESUMO
The design of boron-based molecular rotors stems from boron-carbon binary clusters containing multiple planar hypercoordinate carbons (phCs, such as C2B8). However, the design of boron-coordinated phCs is challenging due to boron's tendency to occupy hypercoordinate centers more than carbon. Although this challenge has been addressed, the designed clusters of interest have not exhibited dynamic fluxionality similar to that of the initial C2B8. To address this issue, we report a σ/π doubly aromatic CB2H5 + cluster, the first global minimum containing a boron-coordinated planar tetracoordinate carbon atom with dynamic fluxionality. Dynamics simulations show that two ligand H atoms exhibit alternate rotation, resulting in an intriguing dynamic fluxionality in this cluster. Electronic structure analysis reveals the flexible bonding positions of the ligand H atoms because they do not participate in π delocalized bonding nor bond to any other non-carbon atom, highlighting this rotational fluxionality. Unprecedentedly, the fluxional process involves not only the usual conversion of the number of bonding atoms, but also the type of bonding (3c π bonds â4c σ bonds), which is an uncommon fluxional mechanism. The cluster represents an effort to apply phC species to molecular machines.
RESUMO
For protecting the exquisite structural patterns of such coins, developments of simple preparation methods were explored to achieve good hydrophobic capability and the wear-damage resistance of CuZnPb surfaces. A self-cleaning nanoliquid (SN) was combined with microstructured Ag-dispersed CuZnPb (MAC) to realize good hydrophobicity functions of the SNMAC. This was because the cooperative functions of silver and the SN enhanced the water reunion ability and increased solid-liquid-gas contact areas, leading to high contact angles of SNMAC. Their cooperations produced discrepant forces in their respective areas of the water drops and increased heterogeneous flowing, resulting in a high-angle hysteresis of SNMAC. Subsequently, the wear-damage resistance of the hydrophobic interface was measured in a ball-on-flat tribopair system, and the results showed that sliding injuries made a height distribution of the hydrophobic surface trend toward an equalization, allowing the cooperation of nano-silver, SN, and CuZnPb to form a new-style interface for achieving excellent hydrophobicity, thus producing the highest contact angles of the SNMAC among the as-prepared samples.
RESUMO
A large quantity of coal fly ash is generated worldwide from thermal power plants, causing a serious environmental threat owing to disposal and storage problems. In this work, for the first time, coal fly ash is converted into advanced and novel aerogel fibers and high-purity α-Al2O3. Silica-bacterial cellulose composite aerogel fibers (CAFs) were synthesized using an in situ sol-gel process under ambient pressure drying. Due to the unique "nanoscale interpenetrating network" (IPN) structure, the CAFs showed wonderful mechanical properties with an optimum tensile strength of 5.0 MPa at an ultimate elongation of 5.8%. Furthermore, CAFs with a high porosity (91.8%) and high specific surface area (588.75 m2/g) can inherit advanced features, including excellent thermal insulation, stability over a wide temperature range, and hydrophobicity (contact angle of approximately 144°). Additionally, Al2O3 was simultaneously extracted from the coal fly ash to ensure that the coal fly ash was fully exploited. Overall, low-cost woven CAFs fabrics are suitable for wearable applications and offer a great approach to comprehensively use coal fly ash to address environmental threats.
RESUMO
Plant polyphenol-inspired surface modification of membranes is helpful for oil-water separation. However, the preparation of this coating is time-consuming. Herein, we introduce a rapid synthesis of the TA-APTES coating by the addition of sodium periodate (SP). The surface chemical composition and morphology of the resultant TA-APTES hybrid coatings were characterized using SEM, ATR-FTIR, and XPS. The hydrophilicity and membrane performance were investigated by the water contact angle, pure water permeability, and oil rejection for an isooctane-in-water emulsion. The experimental findings revealed that the optimal microfiltration (MF) membrane (MF-TA-APTES-SP-0.05) displayed exceptional hydrophilicity and water permeability (9558 L m-2 h-1 bar-1). The membrane realized highly efficient separation with a permeability (4117 L m-2 h-1 bar-1) and rejection of oils (>99%). Furthermore, it possessed outstanding chemical stability and maintained underwater superoleophobicity even after exposure to harsh conditions. This simple and rapid strategy of developing hydrophilic coatings as a modifier for the poly(vinylidene fluoride) membranes has potential applications in oil-water separation and wastewater treatment.
Assuntos
Membranas Artificiais , Taninos , Emulsões , Óleos/química , Água/químicaRESUMO
Computational evidence is reported for the largest planar molecular wheel of the Y©B8C4 cluster, featuring an yttrium atom enclosed by a highly symmetric B8C4 ring. The B8C4 ring is viable in the -(BCB)4- form with double 9π/10σ aromaticity. The centered yttrium atom is dodeca-coordinated with the peripheral B8C4 ring, which sets a record coordination number for a planar structure in chemistry heretofore.
RESUMO
OBJECTIVE: In this study, differentially expressed genes (DEGs) and signaling pathways involved in diquat (DQ) and paraquat (PQ) poisoning were identified via bioinformatics analysis, in order to inform the development of novel clinical treatments. METHODS: Raw data from GSE153959 were downloaded from the Gene Expression Omnibus database. DEGs of the DQ vs. control (CON) and PQ vs. CON comparison groups were identified using R, and DEGs shared by the two groups were identified using TBtools. Subsequently, the shared DEGs were searched in the Gene Ontology and Kyoto Encyclopedia of Genes and Genomes (KEGG) databases, using the Database for Annotation, Visualization, and Integrated Discovery. A protein-protein interaction (PPI) network was constructed, and hub genes were identified using the cytoHubba plug-in in Cytoscape software. Finally, circos and contrast plots showing the DEGs shared between mouse and human chromosomes were constructed using TBtools. RESULTS: Thirty-one DEGs shared by the DQ and PQ groups were identified. Enriched biological process terms included positive regulation of cell proliferation and translation. Enriched cellular component terms included extracellular region, intracellular membrane-bounded organelle and mitochondrion. Enriched molecular function terms included transcription factor activity and sequence-specific double-stranded DNA binding. Enriched KEGG pathways included the interleukin-17 signaling pathway, tumor necrosis factor signaling pathway, and human T-cell leukemia virus 1 infection. The top 10 hub genes in the PPI network were prostaglandin-endoperoxide synthase 2 (Ptgs2), chemokine (C-X-C motif) ligand 2 (Cxcl2), colony-stimulating factor 2 (granulocyte-macrophage) (Csf2), matrix metallopeptidase 13 (Mmp13), amphiregulin (Areg), plasminogen activator, urokinase receptor (Plaur), fos-like antigen 1 (Fosl1), epiregulin (Ereg), activating transcription factor 3 (Atf3), and transferrin receptor (Tfrc). Cxcl2, Csf2, and Atf3 played important roles in the mitogen-activated protein kinase (MAPK) signaling pathway. CONCLUSIONS: These pathways and DEGs may serve as targets for gene therapy.
Assuntos
Biologia Computacional , Diquat , Paraquat , Fator 3 Ativador da Transcrição , Anfirregulina , Animais , Quimiocina CXCL2 , Fatores Estimuladores de Colônias , Ciclo-Oxigenase 2 , Diquat/intoxicação , Epirregulina , Perfilação da Expressão Gênica , Humanos , Interleucina-17 , Metaloproteinase 13 da Matriz , Camundongos , Proteínas Quinases Ativadas por Mitógeno , Paraquat/intoxicação , Receptores da Transferrina , Receptores de Ativador de Plasminogênio Tipo Uroquinase , Fatores de Necrose TumoralRESUMO
Computational evidence is reported on a boron-based ternary Rb6Be2B6 cluster as the "Big Mac" sandwich on a subnanoscale with thickness of 0.58 nm. The core hexagonal B6 ring, occurring in the naked form due to double 6π/6σ aromaticity, is capped by two tetrahedral BeRb3 ligands. Such a B6 motif is scarce in boron clusters. The sandwich cluster has four-fold 2σ/6π/6σ/2σ aromaticity and its tetrahedral BeRb3 ligand is the simplest case of three-dimensional aromaticity (or spherical aromaticity). The sandwich can be formulated as a charge-transfer complex, [Rb3Be]3+[B6]6-[BeRb3]3+, whose components are held together by robust electrostatics, facilitating dual-mode dynamic fluxionality.
RESUMO
The typical electron-deficiency of the boron element renders fascinating architectures and chemical bonding to boron-based nanoclusters. We theoretically predict two di-Ca-doped boron clusters, B6Ca2 (D2h, 1Ag) and B8Ca2 (D8h, 1A1g), and both adopt interesting inverse sandwich geometries, showing an elongated D2h B6 or perfectly planar D8h B8 ring being sandwiched by two Ca atoms only, respectively. Natural atomic charge analyses indicate that the Ca atoms donate nearly all the 4s electrons to the B6 (or B8) ring, forming [Ca]2+[B6]4-[Ca]2+ and [Ca]2+[B8]4-[Ca]2+ charge transfer complexes. The interaction between the two Ca atoms and the boron rings is governed by robust electrostatics albeit by weaker B-Ca covalent interaction. Chemical bonding analyses show that B6Ca2 has 4σ and 6π delocalized electrons on the elongated B6 ring, leading to a conflicting aromatic system. B8Ca2, possessing 6σ and 6π delocalized electrons on the B8 ring, is doubly aromatic. Additionally, the B6Ca2 and B8Ca2 clusters show noticeable structural and electronic transmutation relative to their equivalent electronic B6Be2 and B8Mg2 clusters, respectively. The intrinsic reasons behind the transmutations are elucidated via in-depth bonding analyses.
RESUMO
A novel tetrabutylammonium iodide (TBAI)-promoted three-component reaction of carboxylic acid with alkene and alcohol has been developed, which represents facile and straightforward access to polysubstituted γ-lactone skeletons in moderate-to-good yields. This methodology is distinguished by the use of a commercial catalyst and readily available starting materials, wide substrate scope, and operational simplicity. Mechanistic studies suggested that this transformation went through a radical process.
RESUMO
OBJECTIVES: Polyethylene glycol-20k is a hybrid cell impermeant that reduces ischemia injury and improves microcirculatory flow during and following low flow states through nonenergy-dependent water transfer in the microcirculation. We investigated the effects of polyethylene glycol-20k on postresuscitation microcirculation, myocardial and cerebral function, and duration of survival in a rat model of cardiopulmonary resuscitation. DESIGN: Ventricular fibrillation was induced in 20 male Sprague Dawley rats and untreated for 6 minutes. Animals were randomized into two groups (n = 10 for each group): polyethylene glycol-20k and control. Polyethylene glycol-20k (10% solution in saline, 10% estimated blood volume) and vehicle (saline) were administered at the beginning of cardiopulmonary resuscitation by continuous IV infusion. Resuscitation was attempted after 8 minutes of cardiopulmonary resuscitation. SETTING: University-Affiliated Research Laboratory. SUBJECTS: Sprague Dawley Rats. INTERVENTIONS: Polyethylene glycol-20k. MEASUREMENTS AND MAIN RESULTS: Buccal microcirculation was measured at baseline, 1, 3, and 6 hours after return of spontaneous circulation using a side-stream dark-field imaging device. Myocardial function was measured by echocardiography at baseline and every hour postresuscitation for 6 hours. The animals were then returned to their cage and observed for an additional 72 hours. Neurologic Deficit Scores were recorded at 24, 48, and 72 hours after resuscitation. Postresuscitation ejection fraction, cardiac output, and myocardial performance index were significantly improved in animals treated with polyethylene glycol-20k (p < 0.05). Perfused buccal vessel density and microcirculatory flow index values were significantly higher at all time points in the polyethylene glycol-20k group compared with the control group. Postresuscitation cerebral function and survival rate were also significantly improved in animals that received polyethylene glycol-20k. CONCLUSIONS: Administration of polyethylene glycol-20k following cardiopulmonary resuscitation improves postresuscitation myocardial and cerebral function, buccal microcirculation, and survival in a rat model of cardiopulmonary resuscitation.
Assuntos
Reanimação Cardiopulmonar/métodos , Polietilenoglicóis/farmacologia , Traumatismo por Reperfusão/prevenção & controle , Fibrilação Ventricular/terapia , Animais , Circulação Cerebrovascular/efeitos dos fármacos , Modelos Animais de Doenças , Eletrocardiografia , Testes de Função Cardíaca , Masculino , Microcirculação/efeitos dos fármacos , Traumatismo por Reperfusão Miocárdica/prevenção & controle , Ratos , Ratos Sprague-DawleyRESUMO
BACKGROUND: Mesenchymal stem cells (MSCs) transplantation has been regarded as an optimal therapeutic approach for cardiovascular disease. However, the inferior survival and low vascularization potential of these cells in the local infarct site reduce the therapeutic efficacy. In this study, we investigated the influence of apelin on MSCs survival and vascularization under hypoxic-ischemic condition in vitro and explored the relevant mechanism. METHODS: MSCs were obtained from C57BL/6 mice and cultured in vitro. Cells of the third passage were divided into MSCs and MSCs+apelin groups. In the MSCs+apelin group, MSCs were stimulated with apelin-13 (5µM). The two groups experienced exposure to hypoxia (1% O2) and serum deprivation for 24h, using normoxia (20% O2) as a negative control during the process. Human umbilical vein endothelial cells (HUVECs) were used and incubated with conditioned media from both groups to promote vascularization for another 6h. Vascular densities were assessed and relevant biomarkers were detected thereafter. RESULTS: Compared with MSCs group, MSCs+apelin group presented more rapid growth. The proliferation rate was much higher. Cells apoptosis percentage was significantly declined both under normoxic and hypoxic conditions. Media produced from MSCs+apelin group triggered HUVECs to form a larger number of vascular branches on matrigel. The expression and secretion of vascular endothelial growth factor (VEGF) were significantly increased. CONCLUSION: Apelin could effectively promote MSCs survival and vascularization under hypoxic-ischemic condition in vitro, and this procedure was associated with the upregulation of VEGF. This study provides a new perspective for exploring novel approaches to enhance MSCs survival and vascularization potential.
Assuntos
Sobrevivência Celular/efeitos dos fármacos , Peptídeos e Proteínas de Sinalização Intercelular/farmacologia , Células-Tronco Mesenquimais/efeitos dos fármacos , Neovascularização Patológica/tratamento farmacológico , Fator A de Crescimento do Endotélio Vascular/metabolismo , Animais , Apoptose , Hipóxia Celular/efeitos dos fármacos , Proliferação de Células , Células Cultivadas , Meios de Cultivo Condicionados/química , Células Endoteliais da Veia Umbilical Humana , Humanos , Células-Tronco Mesenquimais/citologia , Camundongos , Camundongos Endogâmicos C57BL , Regulação para Cima , Fator A de Crescimento do Endotélio Vascular/genéticaRESUMO
Clenbuterol, a ß2-selective adrenergic receptor agonist, is illicitly used in weight loss and performance enhancement and animal production. Increasing evidence demonstrates that clenbuterol induces various kinds of arrhythmias and QTc interval prolongation. However, little is known about the underlying mechanism. Most drugs are associated with QTc prolongation through interfering with human ether-a-go-go-related gene (hERG) K+ channels. The present study aims to investigate the effects and underlying mechanisms of clenbuterol on the hERG channel. HEK 293 cells were transfected with wild type and Y652A or F656A mutants of the hERG channel and treated with clenbuterol. The hERG current was recorded using whole-cell patch-clamp technique, and protein level was evaluated by Western blot. We found that clenbuterol decreases the mature form of the hERG protein at the cell membrane in a concentration- and time-dependent manner, without affecting the immature form. Correspondingly, clenbuterol chronic treatment reduced hERG current to a greater extent compared to acute treatment. In the presence of Brefeldin A (BFA), which was used to block hERG channel trafficking to cell membrane, clenbuterol reduced hERG on plasma membrane to a greater extent than BFA alone. In addition, the hERG channel's drug binding sites mutant Y652A and F656A abolished clenbuterol-mediated hERG reduction and current blockade. In conclusion, clenbuterol reduces hERG channel expression and current by promoting the channel degradation. The effect of clenbuterol on the hERG channel is related to the drug-binding sites, Tyr-652 and Phe-656, located on the S6 domain. This biophysical mechanism may underlie clenbuterol-induced QTc prolongation or arrhythmia.
Assuntos
Clembuterol/farmacologia , Canais de Potássio Éter-A-Go-Go/metabolismo , Proteólise/efeitos dos fármacos , Agonistas Adrenérgicos beta/farmacologia , Arritmias Cardíacas/induzido quimicamente , Sítios de Ligação/genética , Células Cultivadas , Relação Dose-Resposta a Droga , Canais de Potássio Éter-A-Go-Go/genética , Regulação da Expressão Gênica/efeitos dos fármacos , Células HEK293 , Humanos , Mutação , Técnicas de Patch-ClampRESUMO
Based on extensive global-minimum searches and first-principles electronic structure calculations, we present the viability of an endohedral metalloborospherene Cs Ca@B38 () which contains a Cs B38(2-) () dianion composed of interwoven boron double chains with a σ + π double delocalization bonding pattern, extending the Bn(q) (q = n - 40) borospherene family from n = 39-42 to n = 38. Transition metal endohedral complexes Cs M@B38 (M = Sc, Y, Ti) (, , ) based on Cs B38(2-) () are also predicted.
RESUMO
Size-selected boron clusters have been found to be predominantly planar or quasi-planar (2D) in the small size regime with the appearance of three-dimensional (3D) borospherene cages of larger sizes. A seashell-like B28- cluster was previously shown to be the smallest borospherene, which competes with a quasi-planar isomer for the global minimum. Here we report a study on the structures and bonding of the B29- and B29 clusters using photoelectron spectroscopy (PES) and first-principles calculations and demonstrate the continued competition between the 2D and borospherene structures. The PES spectrum of B29- displays a complex pattern with evidence of low-lying isomers. Global-minimum searches and extensive theoretical calculations revealed a complicated potential energy surface for B29- with five low-lying isomers, among which the lowest three were shown to contribute to the experimental spectrum. A 3D seashell-like Cs (2, 1A') isomer, featuring two heptagons on the waist and one octagon at the bottom, is the global minimum for B29-, followed by a 2D C1 (3, 1A) isomer with a hexagonal hole and a stingray-shaped 2D Cs (1, 1A') isomer with a pentagonal hole. However, by taking into account the entropic effects, the stingray-shaped isomer 1 was shown to be the lowest in energy at room temperature and was found to dominate the PES spectrum. Isomers 2 and 3, which have lower electron binding energies, were also found to be present in the experiment. Chemical bonding analyses showed that isomer 1 is an all-boron analogue of benzo[ghi]fluoranthene (C18H10), whereas the borospherene isomer 2 possesses 18π electrons, conforming to the 2(N + 1)2 electron counting rule for spherical aromaticity. For the B29 neutral cluster, the seashell-like borospherene isomer is the global minimum, significantly lower in energy than the stingray-shaped quasi-planar structure.
RESUMO
Using the newly discovered borospherenes C3 B39(-) and C2 B39(-) as molecular devices and based on extensive global-minimum searches and first-principles calculations, we present herein the possibility of the first axially chiral metalloborospherenes C3 Ca@B39(+) (, (1)A) and C2 Ca@B39(+) (, (1)A), which are the global minimum and the second lowest-lying isomer of CaB39(+), respectively. These metalloborospherene species turn out to be charge-transfer complexes Ca(2+)@B39(-) in nature, with the Ca centre on the C3 or C2 molecular axis donating one electron to the B39 cage which behaves like a superhalogen. Molecular orbital analyses indicate that C3/C2 Ca(2+)@B39(-) possess the universal bonding pattern of σ plus π double delocalization, similar to their C3/C2 B39(-) parents. Molecular dynamics simulations show that both C3 Ca@B39(+) () and C2 Ca@B39(+) () are dynamically stable at 200 K, with the former starting to fluctuate structurally at 300 K and the latter at 400 K, again similar to C3/C2 B39(-). The infrared and Raman spectra of C3/C2 Ca@B39(+) (/) are simulated and compared with those of C3/C2 B39(-) to facilitate their forthcoming experimental characterization.
RESUMO
The diagonal relationship between beryllium and aluminum and the isoelectronic relationship between BeH unit and Al atom were utilized to design a new series ppC- or quasi-ppC-containing species C5v CBe5H5(+), Cs CBe5H4, C2v CBe5H3(-), and C2v CBe5H2(2-) by replacing the Al atoms in previously reported global minima planar pentacoordinate carbon (ppC) species D5h CAl5(+), C2v CAl4Be, C2v CAl3Be2(-), and C2v CAl2Be3(2-) with BeH units. The three-center two-electron (3c-2e) bonds formed between Be and bridging H atoms were crucial for the stabilization of these ppC species. The natural bond orbital (NBO) and adaptive natural density partitioning (AdNDP) analyses revealed that the central ppCs or quasi-ppCs possess the stable eight electron-shell structures. The AdNDP analyses also disclosed that these species are all 6σ+2π double-aromatic in nature. The aromaticity was proved by the calculated negative nucleus-independent chemical shifts (NICS) values. DFT and high-level CCSD(T) calculations revealed that these ppC- or quasi-ppC species are the global minimum or competitive low-lying local minimum (Cs CBe5H4) on their potential energy surfaces. The Born-Oppenheimer molecular dynamic (BOMD) simulations revealed that the H atoms in C2v CBe5H3(-) and C2v CBe5H2(2-) can easily rotate around the CBe5 cores and the structure of quasi-planar C5v CBe5H5(+) will become the planar structure at room temperature; however, these interesting dynamic behaviors did not indicate the kinetic instability as the basic ppC structures were maintained during the simulations. Therefore, it would be potentially possible to realize these interesting ppC- or quasi-ppc-species in future experiments.
RESUMO
The newly discovered borospherenes B40 (-/0) and B39 (-) mark the onset of a new class of boron nanostructures. Based on extensive first-principles calculations, we introduce herein two new chiral members to the borospherene family: the cage-like C1 B41 (+) (1) and C2 B42 (2+) (2), both of which are the global minima of the systems with degenerate enantiomers. These chiral borospherene cations are composed of twelve interwoven boron double chains with six hexagonal and heptagonal faces and may be viewed as the cuborenes analogous to cubane (C8 H8 ). Chemical bonding analyses show that there exists a three-center two-electron σâ bond on each B3 triangle and twelve multicenter two-electron πâ bonds over the σâ skeleton. Molecular dynamics simulations indicate that C1 B41 (+) (1) fluctuates above 300â K, whereas C2 B42 (2+) (2) remains dynamically stable. The infrared and Raman spectra of these borospherene cations are predicted to facilitate their experimental characterizations.
RESUMO
Aerogel fibers, characterized by their ultra-low density and ultra-low thermal conductivity, are an ideal candidate for personal thermal management as they hold the potential to effectively reduce the energy consumption of room heating and significantly contribute to energy conservation. However, most aerogel fibers have weak mechanical properties or require complex manufacturing processes. In this study, simple continuous silk fibroin-agarose composite aerogel fibers (SCAFs) were prepared by mixing agarose with silk fibroin through wet spinning and rapid gelation, followed by solvent replacement and supercritical carbon dioxide treatment. Among them, the rapid gelation of the SCAFs was achieved using agarose physical methods with heat-reversible gel properties, simplifying the preparation process. Hydrophobic silk fibroin-agarose composite aerogel fibers (HSCAFs) were prepared using a simple chemical vapor deposition (CVD) method. After CVD, the HSCAFs' gel skeletons were uniformly coated with a silica layer containing methyl groups, endowing them with outstanding radial elasticity. Moreover, the HSCAFs exhibited low density (≤0.153 g/cm3), a large specific surface area (≥254.0 m2/g), high porosity (91.1-94.7%), and excellent hydrophobicity (a water contact angle of 136.8°). More importantly, they showed excellent thermal insulation performance in low-temperature (-60 °C) or high-temperature (140 °C) environments. The designed HSCAFs may provide a new approach for the preparation of high-performance aerogel fibers for personal thermal management.
RESUMO
Aerogel fibers are good thermal insulators, suitable for weaving, and show potential as the next generation of intelligent textiles that can effectively reduce heat consumption for personal thermal management. However, the production of continuous aerogel fibers from biomass with sufficient strength and radial elasticity remains a significant challenge. Herein, continuous gel fibers were produced via wet spinning using agarose (AG) as the matrix, 2,2,2,6,6-tetramethylpiperidine-1-oxyl radical-oxidized cellulose nanofibers (TOCNs) as the reinforcing agent, and no other chemical additives by utilizing the gelling properties of AG. Supercritical drying and chemical vapor deposition (CVD) were then used to produce hydrophobic AG-TOCN aerogel fibers (HATAFs). During CVD, the HATAF gel skeleton was covered with an isostructural silica coating. Consequently, the HATAFs can recover from radial compression under 60% strain. Moreover, the HATAFs have low densities (≤0.14 g cm-3), high porosities (≥91.8%), high specific surface areas (≥188 m2 g-1), moderate tensile strengths (≤1.75 MPa), excellent hydrophobicity (water contact angles of >130°), and good thermal insulating properties at different temperatures. Thus, HATAFs are expected to become a new generation of materials for efficient personal thermal management.