Acute aortoiliac occlusion in a patient with novel coronavirus disease-2019.

The severe acute respiratory syndrome novel coronavirus-2 pandemic is affecting almost every country in the world. Even if the major symptoms of coronavirus disease-2019 are respiratory, different symptoms at presentation are now recognized. Venous thromboembolism has been reported in infected patients and few but increasing cases of arterial thrombosis have been described. We report a case of acute aortoiliac and lower limb artery occlusions in a patient presenting with severe coronavirus disease-2019 infection. The mechanism of the occlusion seemed to be distal embolization from a floating thrombus in the aortic arch caused by a major inflammatory state and virus infection. The patient underwent aortoiliac and lower limb artery mechanical thrombectomy, but required unilateral major amputation.

Point defects in IBS coating for very low loss mirrors.

High-reflective coatings are used in many physics experiments. Despite the high quality of the optical coating, the performances of the mirrors are altered by the scattered light induced by micrometer size defects in the coating layers. The topic of this paper is the study of the point-like scatterers present in the specific coating of the mirrors used in state-of-the-art, high-sensitivity optical experiments. We studied the behavior of the materials according to different thicknesses and the resulting defects after annealing. To the best of our knowledge, this is the first insight into the formation of such defects for different materials and thickness and how this is reduced when samples are annealed.

Prior-damage dynamics in a high-finesse optical enhancement cavity.

An observation of prior-damage behavior inside a high-finesse optical resonator is reported. Intra-cavity average power drops appeared with magnitude and time scale depending on the power level. Increasing further the incident laser beam power led to irreversible damage of the cavity coupling mirror surface. The origin of this phenomenon is investigated with post mortem mirror surface imaging and analysis of the signals reflected and transmitted by the enhancement cavity. Scattering losses induced by surface deformation due to a hot-spot surface contaminant is found to be most likely the dominant physics process behind this phenomenon.

Large and extremely low loss: the unique challenges of gravitational wave mirrors.

This paper describes the making of large mirrors for laser interferometer gravitational wave detectors. These optics, working in the near infrared, are among the best optics ever created and played a crucial role in the first direct detection of gravitational waves from black holes or neutron star fusions.

Glucose and lactate as metabolic constraints on presynaptic transmission at an excitatory synapse.

KEY POINTS: Synapses have high energy demands which increase during intense activity. We show that presynaptic terminals can utilise extracellular glucose or lactate to generate energy to maintain synaptic transmission. Reducing energy substrates induces a metabolic stress: presynaptic ATP depletion impaired synaptic transmission through a reduction in the number of functional synaptic vesicle release sites and a slowing of vesicle pool replenishment, without a consistent change in release probability. Metabolic function is compromised in many pathological conditions (e.g. stroke, traumatic brain injury and neurodegeneration). Knowledge of how synaptic transmission is constrained by metabolic stress, especially during intense brain activity, will provide insights to improve cognition following pathological insults. ABSTRACT: The synapse has high energy demands, which increase during intense activity. Presynaptic ATP production depends on substrate availability and usage will increase during activity, which in turn could influence transmitter release and information transmission. We investigated transmitter release at the mouse calyx of Held synapse using glucose or lactate (10, 1 or 0 mm) as the extracellular substrates while inducing metabolic stress. High-frequency stimulation (HFS) and recovery paradigms evoked trains of EPSCs monitored under voltage-clamp. Whilst postsynaptic intracellular ATP was stabilised by diffusion from the patch pipette, depletion of glucose increased EPSC depression during HFS and impaired subsequent recovery. Computational modelling of these data demonstrated a reduction in the number of functional release sites and slowed vesicle pool replenishment during metabolic stress, with little change in release probability. Directly depleting presynaptic terminal ATP impaired transmitter release in an analogous manner to glucose depletion. In the absence of glucose, presynaptic terminal metabolism could utilise lactate from the aCSF and this was blocked by inhibition of monocarboxylate transporters (MCTs). MCT inhibitors significantly suppressed transmission in low glucose, implying that lactate is a presynaptic substrate. Additionally, block of glycogenolysis accelerated synaptic transmission failure in the absence of extracellular glucose, consistent with supplemental supply of lactate by local astrocytes. We conclude that both glucose and lactate support presynaptic metabolism and that limited availability, exacerbated by high-intensity firing, constrains presynaptic ATP, impeding transmission through a reduction in functional presynaptic release sites as vesicle recycling slows when ATP levels are low.

Vacuum-compatible low-loss Faraday isolator for efficient squeezed-light injection in laser-interferometer-based gravitational-wave detectors.

In this paper, we present, to the best of our knowledge, the first low-loss vacuum-compatible thermally controlled Faraday isolator able to retain a good isolation factor under high-vacuum working conditions. The throughput that can be obtained with the developed device is as high as 99%, retaining an isolation factor higher than 40 dB. That very high isolation ratio can be kept over long time periods independently from external temperature conditions with a few Celsius degrees of variation due to thermal active control. The mechanical and optical configuration is detailed, and the performances achieved with this device are presented.

Photometric calibration of an in situ broadband optical thickness monitoring of thin films in a large vacuum chamber.

To improve the in situ monitoring of thin films at the Laboratoire des Matériaux Avancés, a broadband optical monitoring of the coated thin films was developed and installed in the biggest ion-beam sputtering machine in the world. Due to the configuration of the coating machine and the chamber strain under vacuum, a standard calibration procedure is impossible and a double-beam optical system is not suitable. A novel theoretical and practical solution to calibrate the measurements was found and is described in this paper. Some relevant results achieved thanks to this technique are discussed as well.

Identification and modelling of fast and slow Ih current components in vestibular ganglion neurons.

Previous experimental data indicates the hyperpolarization-activated cation (Ih) current, in the inner ear, consists of two components [different hyperpolarization-activated cyclic nucleotide-gated (HCN) subunits] which are impossible to pharmacologically isolate. To confirm the presence of these two components in vestibular ganglion neurons we have applied a parameter identification algorithm which is able to discriminate the parameters of the two components from experimental data. Using simulated data we have shown that this algorithm is able to identify the parameters of two populations of non-inactivated ionic channels more accurately than a classical method. Moreover, the algorithm was demonstrated to be insensitive to the key parameter variations. We then applied this algorithm to Ih current recordings from mouse vestibular ganglion neurons. The algorithm revealed the presence of a high-voltage-activated slow component and a low-voltage-activated fast component. Finally, the electrophysiological significance of these two Ih components was tested individually in computational vestibular ganglion neuron models (sustained and transient), in the control case and in the presence of cAMP, an intracellular cyclic nucleotide that modulates HCN channel activity. The results suggest that, first, the fast and slow components modulate differently the action potential excitability and the excitatory postsynaptic potentials in both sustained and transient vestibular neurons and, second, the fast and slow components, in the control case, provide different information about characteristics of the stimulation and this information is significantly modified after modulation by cAMP.

Bulk optical absorption of high resistivity silicon at 1550 nm.

We report on the measurement of the optical absorption of bulk crystalline silicon at 1550 nm. Using the photodeflection technique, absorption as low as 5 ppm/cm has been measured on a sample with a resistivity of 10 kΩ·cm. The absorption as a function of the resistivity has been derived for n-type silicon.

Cryogenic measurements of mechanical loss of high-reflectivity coating and estimation of thermal noise.

We report on low-frequency measurements of the mechanical loss of a high-quality (transmissivity T<5 ppm at λ(0)=1064 nm, absorption loss <0.5 ppm) multilayer dielectric coating of ion-beam-sputtered fused silica and titanium-doped tantala in the 10-300 K temperature range. A useful parameter for the computation of coating thermal noise on different substrates is derived as a function of temperature and frequency.

Twin mirrors for laser interferometric gravitational-wave detectors.

Gravitational-wave detectors such as Virgo and the laser interferometric gravitational-wave observatory (LIGO) use a long-baseline Michelson interferometer with Fabry-Perot cavities in the arms to search for gravitational waves. The symmetry between the two Fabry-Perot cavities is crucial to reduce the interferometer's sensitivity to the laser amplitude and frequency noise. To this purpose, the transmittance of the mirrors in both cavities should be as close as possible. This paper describes the realization and the characterization of the first twin large low-loss mirrors with transmissions differing by less than 0.01%.

Observation of a Correlation Between Internal friction and Urbach Energy in Amorphous Oxides Thin Films.

We have investigated by spectroscopic ellipsometry (SE, 190-1700 nm) the optical properties of uniform, amorphous thin films of Ta2O5 and Nb2O5 as deposited and after annealing, and after so-called "doping" with Ti atoms which leads to mixed oxides. Ta2O5 and Ti:Ta2O5 are currently used as high-index components in Bragg reflectors for Gravitational Wave Detectors. Parallel to the optical investigation, we measured the mechanical energy dissipation of the same coatings, through the so-called "loss angle" ϕ = Q-1, which quantifies the energy loss in materials. By applying the well-known Cody-Lorentz model in the analysis of SE data we have been able to derive accurate information on the fundamental absorption edge through important parameters related to the electronic density of states, such as the optical gap (Eg) and the energy width of the exponential Urbach tail (the Urbach energy EU). We have found that EU is neatly reduced by suitable annealing as is also perceptible from direct inspection of SE data. Ti-doping also points to a minor decrease of EU. The reduction of EU parallels a lowering of the mechanical losses quantified by the loss angle ϕ. The correlation highlights that both the electronic states responsible of Urbach tail and the internal friction are sensitive to a self-correlation of defects on a medium-range scale, which is promoted by annealing and in our case, to a lesser extent, by doping. These observations may contribute to a better understanding of the relationship between structural and mechanical properties in amorphous oxides.

A new method of probing mechanical losses of coatings at cryogenic temperatures.

A new method of probing mechanical losses and comparing the corresponding deposition processes of metallic and dielectric coatings in 1-100 MHz frequency range and cryogenic temperatures is presented. The method is based on the use of high-quality quartz acoustic cavities whose internal losses are orders of magnitude lower than any available coating nowadays. The approach is demonstrated for chromium, chromium/gold, and multilayer tantala/silica coatings. The Ta2O5/SiO2 coating has been found to exhibit a loss angle lower than 1.6 × 10-5 near 30 MHz at 4 K. The results are compared to the previous measurements.

Oxidative stress, inflammation, and autophagic stress as the key mechanisms of premature age-related hearing loss in SAMP8 mouse Cochlea.

AIMS: In our aging society, age-related hearing loss (ARHL) or presbycusis is increasingly important. Here, we study the mechanism of ARHL using the senescence-accelerated mouse prone 8 (SAMP8) which is a useful model to probe the effects of aging on biological processes. RESULTS: We found that the SAMP8 strain displays premature hearing loss and cochlear degeneration recapitulating the processes observed in human presbycusis (i.e., strial, sensory, and neural degeneration). The molecular mechanisms associated with premature ARHL in SAMP8 mice involve oxidative stress, altered levels of antioxidant enzymes, and decreased activity of Complexes I, II, and IV, which in turn lead to chronic inflammation and triggering of apoptotic cell death pathways. In addition, spiral ganglion neurons (SGNs) also undergo autophagic stress and accumulated lipofuscin. INNOVATION AND CONCLUSION: Our results provide evidence that targeting oxidative stress, chronic inflammation, or apoptotic pathways may have therapeutic potential. Modulation of autophagy may be another strategy. The fact that autophagic stress and protein aggregation occurred specifically in SGNs also offers promising perspectives for the prevention of neural presbycusis.

Ion beam sputtering coatings on large substrates: toward an improvement of the mechanical and optical performances.

Large mirrors (ø350 mm) having extremely low optical loss (absorption, scattering, wavefront) were coated for the VIRGO interferometer. The new generation of mirrors needs to have a better wavefront and lower mechanical loss. To improve the component wavefront, the corrective coating technique was used. By doping the tantalum pentoxide layers, we improved, for the first time to our knowledge, the multilayer mechanical loss. The first results are discussed.

[New brain imaging techniques]. / Les nouvelles techniques d'imagerie du cerveau.

Neuroimaging technologies have improved neurology and neurosurgery by providing tools to look inside the brain and investigate its functions and diseases. As for any tool, the users should know the basics of each technique and be aware about their uses and limitations. Here we review these new techniques and illustrate their use with examples from studies at the University Hospital in Geneva. From all the techniques, MRI (Magnetic Resonance Imagery) has the highest spatial resolution. Taking advantage of the magnetic properties of the hydrogen nucleus, it is possible to reach a sub-millimeter resolution in 3D. When MRI images are digitized, they can be treated to perform re-slicing, segmentation and 3D reconstruction of cortical surfaces, as well as to measure anatomical structures (volumetry). Functional MRI (fMRI) is based on blood oxygenation changes when a task is performed or when epileptic activity occurred. Then it can be used to non-invasively show for example language, motor or epileptic network activation. Electromagnetic imaging techniques, based on EEG and MEG, have the power to localize in 3D the electrical activity of the brain with millisecond temporal resolution and then to follow the temporal activation of neuronal networks. These techniques use mathematical models and algorithms to compute 3D tomography from 2D recordings on the scalp. In the case of epilepsy, EEG allows epileptic foci identification among propagation sites when it is recorded with a sufficient number of electrodes (> 100) and when realistic head models are used. The functional imaging techniques from nuclear medicine (PET and SPECT) have become very useful in neuroscience to explore cerebral changes associated with neuronal pathologies as well as cognitive and sensory tasks. Many efforts have been made to develop new cameras and models to increase the range of research and clinical applications. Co-registration of structural and functional images allows us to add functional information to a structural deficit, or conversely to better interpret functional images such as PET, SPECT and EEG in terms of specific anatomy. In the case of SPECT and fMRI, substraction between ictal and interictal exams points out areas involved in epileptic processes.