Does implant drill design influence the accuracy of dental implant placement using static computer-assisted implant surgery? An in vitro study.

BACKGROUND: The purpose of this in vitro study was to compare the accuracy of implant placement in model surgeries according to the design of the drills (straight drills or step drills) used to finalize the implant bed during pilot-guided static computer-assisted implant surgery (sCAIS). METHODS: Model surgeries were carried out on resin models randomly assigned to three study groups. Virtual planning software (coDiagnostiX 10.6, Dental Wings, Montreal, Canada) was used to plan the implant positions. In Groups 1 and 2, pilot-guided sCAIS was performed. Straight drills were used in Group 1, and step drills were used in Group 2 to finalize the implant beds. In Group 3, fully guided sCAIS was performed using a universal fully guided kit (RealGUIDE Full Surgical Kit 3DIEMME, RealGUIDE, Cantù, Como, Italy). A total of 90 dental implants (Callus Pro, Callus Implant Solutions GmbH, Nuremberg, Germany) were placed (six implants per model, five models per study group). The primary outcome variables (angular deviation, coronal global deviation, and apical global deviation) were calculated for all implants based on the comparison of the preoperative surgical plan with the postoperative scans. RESULTS: Group 2 (coronal global deviation, 0.78 ± 0.29 mm; apical global deviation, 1.02 ± 0.56 mm) showed significantly lower values of both global deviation variables than Group 1 (coronal global deviation, 0.95 ± 0.20 mm; apical global deviation, 1.42 ± 0.49 mm). However, there was no significant difference in angular deviation between Groups 1 and 2 (7.56 ± 2.92° and 6.44 ± 2.84°). Group 3 produced significantly lower values of all three primary outcome variables (angular deviation, 2.36 ± 0.90°; coronal global deviation, 0.59 ± 0.28 mm; apical global deviation, 0.90 ± 0.29 mm) than Group 1 and significantly lower angular deviation and coronal global deviation values than Group 2. CONCLUSIONS: The design of the drills used to finalize implant osteotomies during pilot-guided sCAIS influences dental implant placement accuracy. Using step drills instead of straight drills for final osteotomies decreases deviation from the surgical plan. The fully guided approach performed better than the pilot-guided sCAIS.

Resorbable magnesium metal membrane for sinus lift procedures: a case series.

BACKGROUND: The purpose of this case series was to demonstrate the use of a magnesium membrane for repairing the perforated membrane in both direct and indirect approaches, as well as its application in instances where there has been a tear of the Schneiderian membrane. CASE PRESENTATION: The case series included four individual cases, each demonstrating the application of a magnesium membrane followed by bone augmentation using a mixture of xenograft and allograft material in the sinus cavity. In the first three cases, rupture of Schneiderian membrane occurred as a result of tooth extraction, positioning of the dental implant, or as a complication during the procedure. In the fourth case, Schneiderian membrane was perforated as a result of the need to aspirate a polyp in the maxillary sinus. In case one, 10 mm of newly formed bone is visible four months after graft placement. Other cases showed between 15 and 20 mm of newly formed alveolar bone. No residual magnesium membrane was seen on clinical inspection. The vertical and horizontal augmentations proved stable and the dental implants were placed in the previously grafted sites. CONCLUSION: Within the limitations of this case series, postoperative clinical examination, and panoramic and CBCT images demonstrated that resorbable magnesium membrane is a viable material for sinus lift and Schneiderian membrane repair. The case series showed successful healing and formation of new alveolar bone with separation of the oral cavity and maxillary sinus in four patients.

SOS teeth with advanced caries and sociodemographic indicators, health-related habits and dental attendance patterns: data from the Dental, Oral, Medical Epidemiological (DOME) nationwide records-based study.

BACKGROUND: "SOS teeth" are teeth that need to be treated first, and represent dental teeth with deep caries seen clinically and radiographically which may require root canal treatment or extraction. The aims of the present research were to study the associations of SOS teeth with: socio-demographic parameters, dental attendance patterns, health-related habits among young to middle-aged adults. METHODS: This cross-sectional records-based research analyzed data from the Dental, Oral, Medical Epidemiological (DOME) repository that captures comprehensive socio-demographic, medical, and dental databases of a nationwide sample of 132,529 records of dental attendees to military dental clinics for 1 year aged 18 to 50 years. RESULTS: SOS teeth had a significant positive association in the multivariate analysis with male sex [OR 1.137, 95% Confidence Interval (CI): 1.079-1.199], rural versus urban Jewish locality [OR 1.748 (1.082-2.825)], and consumption of sweetened beverages [OR 1.415 (1.337-1.496)]. SOS teeth retained significant negative associations (protective parameter) with academic [OR 0.647 (0.592-0.708)] and technicians (OR 0.616 (0.556-0.682)] compared to high school education, high [OR 0.437 (0.401-0.476)], and medium (OR 0.648 (0.598-0.702)] versus low socio-economic status, urban non-Jewish versus urban Jewish locality [OR 0.746 (0.693-0.802)], Asia (OR 0.658 (0.452-0.959)], North America (OR 0.539 (0.442-0.658)] and Israel [OR 0.735 (0.686-0.788)] versus western Europe birth countries. CONCLUSIONS: Health authorities should be familiar with this profile of the patient who is vulnerable to SOS teeth and formulate policies and allow the appropriate implementation of strategies in those in high-risk populations.

Retrospective Clinicopathological Analysis of 65 Peri-Implant Lesions.

Background and Objectives: Peri-implantitis is a common finding among patients with dental implants. There is no consensus regarding the treatment of this disease, but in many cases, surgical treatment is common practice. A histopathological analysis is not an integral part of suggested protocols. The present study investigated the clinical and histopathological parameters of lesions mimicking peri-implantitis and correlated them with the outcome and follow-up data. Materials and Methods: The study included 65 consecutive biopsies taken from peri-implantitis patients between 2008-2019. Results: The three common diagnoses were fibro-epithelial hyperplasia 20 (30.7%), pyogenic granuloma 16 (24.6%), and peripheral giant cell granuloma 15 (23%). There were 18 cases of recurrent lesions in the study group (27.7%). The recurrence rate was the highest in peripheral giant cell granuloma (8, 12.3%), versus 6% in pyogenic granuloma and fibro-epithelial hyperplasia. These differences in the recurrence rate were statistically significant (p = 0.014). Conclusions: This study emphasizes the necessity of submitting tissue of peri-implantitis cases for histopathological analysis since the more locally aggressive lesions (peripheral giant cell granuloma and pyogenic granuloma), which comprise nearly half of the cases in this study, do not differ in clinical or radiographic characteristics from other peri-implant lesions.

Preliminary Study to Evaluate Marginal Bone Loss in Cases of 2- and 3-Implant-Supported Fixed Partial Prostheses of the Posterior Mandible.

PURPOSE: The purpose of this study was to evaluate, by radiographic examinations, the marginal bone resorption around implants in cases of 2 and 3 implant-supported fixed partial prostheses (FPPs) at the posterior mandible. METHODS: A retrospective study of 41 patients (23 males, 18 females) of an average age of 67 years (range, 53-85), with 2 and 3 implants-supported FPPs in the posterior mandible that were treated during 2006 to 2015. The mean follow-up time was 6.32 years (range, 2-10). Twenty-four patients had FPPs on 2 implants (a total of 48 implants). Seventeen patients had FPPs on 3 implants (a total of 51 implants). Clinical and radiographic follow-up examinations were performed. All radiographs were analyzed for changes in marginal bone height surrounding the implants. RESULTS: The mean marginal bone loss around the most mesial implant was slightly higher in the 2-implant group (0.833 mm) compared with the 3-implant group (0.431 mm). The correlation between the mean marginal bone loss around the most mesial implant and the number of implants was of borderline value (P = 0.055). CONCLUSIONS: Considering the limitations of this preliminary study, the authors found that the mesial implant in the 2-implant group is more susceptible to marginal bone loss.

Predictability of Mandibular Autorotation After Le Fort I Maxillary Impaction in Case of Vertical Maxillary Excess.

A retrospective study of 20 patients treated for vertical maxillary excess between 2009 and 2010, solely by superior surgical repositioning of the maxilla. Clinical and radiological cephalometric parameters were analyzed statistically and their impact on achieving the predicted postoperative mandibular autorotation and on relapse. According to our study, patients presenting with an anterior open bite and a low occlusal plane angle might fail to achieve the predicted mandibular autorotation and are prone to postoperative relapse. No correlation was found between the extent of maxillary impaction and the presence of autorotation.

Histological Evaluation of the Effects of Growth Factors in a Fibrin Network on Bone Regeneration.

OBJECTIVE: The aim of this study was to evaluate the effect of mineralized plasmatic matrix (MPM), comprising a combination of synthetic graft and platelet concentrates, on bone regeneration. METHODS: Critical size defects of 6-mm diameter were created on the tibias of 6 male sheep, with the animals subsequently assigned into 2 groups. Of the 5 bone defects generated per animal, 4 were randomly filled with MPM, beta-tricalcium phosphate graft (ß-TCP), platelet-rich fibrin (PRF) + ß-TCP, and autogenous graft. One defect was left empty as a control group. Animals were killed at 3 weeks (early healing group) and 6 weeks (late healing group). The specimens underwent histologic and histomorphometric analysis to evaluate new bone formation. RESULTS: In both healing periods, new bone formation from autogenous bone was observed significantly more often than from biomaterials or the empty defect. The degree of new bone formation for MPM was significantly higher than that of the control group at all healing periods. In addition, it was significantly higher in both healing periods than that of ß-TCP albeit only in the late healing period than that of the PRF + ß-TCP combination. In all biomaterial groups, residual graft ratios decreased from early to late healing periods. CONCLUSION: The results indicated that MPM, representing growth factors in a fibrin network, increases new bone formation in surgically created defects in sheep tibia as confirmed by histologic assessment.

Poly D,L-Lactide-Co-Glycolic Acid Grafting Material in Sinus Lift.

The poly D,L-lactide-co-glycolic acid (PLGA) is a copolymer used in many therapeutic devices for its high rates of biodegradability and biocompatibility. The principal aim of the research was to evaluate the new bone formation, after 16 (T1) and 28 weeks (T2), in sheep maxillary sinus lift in vivo model using PLGA.Computerized tomography analysis, X-ray microanalysis, and scanning electron microscope analysis of secondary electrons (SE) and the backscattered electrons (BSE) of the samples were detected.After 28 weeks, the computed tomography analysis showed a 22% increase of UH density in the grafting areas. The X-ray microanalysis of the samples showed calcium and phosphorus increase at T1 and T2 follow-up period and the carbon and oxygen concentration decrease. The SE evaluation showed a rapid superficial resorption of the biomaterials at T1 and a completely bone reorganization of biomaterial at T2. The BSE analysis confirmed the SE data and showed the direct and intimate contact between bone and PLGA with a higher calcification in T2 compared to T1.Certainly, still other experiments and a larger number of samples will be necessary to be analyzed to determine the behavior of the PLGA in the bone regeneration; however, the PLGA used in maxillary sinus lift animal model, seem to promote new bone formation that continues increase at 28 weeks after grafting.

An in vitro evaluation of marginal fit zirconia crowns fabricated by a CAD-CAM dental laboratory and a milling center.

BACKGROUND: Marginal fit is critical for the success and longevity of a dental restoration. Zirconia crowns can be fabricated either chair-side, in a dental laboratory or in a milling center; each can give different marginal fits results. However, discussion of the marginal fit of zirconia crowns when different fabrication methods are compared is lacking in the literature. PURPOSE: To compare the marginal discrepancy (MD) and absolute marginal discrepancy (AMD) of computer-aided design, and computer-aided manufacturing (CAD-CAM) used in a dental laboratory and a milling center for producing monolithic zirconia crowns. METHODS: The marginal fit of 30 zirconia crowns cemented to typodont teeth was evaluated by means of a sectioning technique. Fifteen crowns were fabricated with a CEREC inLAB MC X5 from IPS e.max ZirCAD blocks. Fifteen crowns were fabricated using a LAVA milling center from LAVA Plus Zirconia Blocks. The 30 crowns were sectioned with a precision saw, and MD and AMD were subsequently measured using a light microscope. Data were analyzed using the one-way ANOVA technique to investigate significant differences in the marginal fit between the two fabrication systems (α = .05). RESULTS: The AMD dimension of the CEREC inLAB system was significantly smaller (P < .05). Mean AMD values for zirconia crowns fabricated by the CEREC inLAB were 85 µm, and for the LAVA milling center 133 µm. There was no significant difference between the two systems regarding the MD dimensions. The MD values for zirconia crowns fabricated by the CEREC inLAB were 53 µm and for the LAVA milling center 61 µm. CONCLUSIONS: The CEREC inLAB system demonstrated significantly better marginal fit in relation to the AMD. However, no difference between the systems was found in the MD. Monolithic zirconia crowns fabricated by the CAD-CAM CEREC inLAB system and the LAVA system milling center showed MD values of less than 120 µm, which is within the clinically acceptable range.

Relationship Between Third Mandibular Molar Angulation and Distal Cervical Caries in the Second Molar.

Third lower molar partially erupted is commonly encountered in dental practice. This situation challenges clinicians with the dilemma whether to remove or to monitor it, because this molar can cause pathology of the adjacent second molar. The aim of this retrospective study is to evaluate the relationship between third mandibular molar and distal cervical caries in second molar. This retrospective study analyzed 55 digital orthopantograms of adult patients and a total number of 95 mandibular third molars were assessed for eruption status, angulation, radiographic evidence of caries or restoration in the mandibular third molar, and radiographic evidence of caries or restoration in the distal surface of the mandibular second molar. The distal cervical caries in second molar is associated with fully erupted and partially erupted wisdom molar in horizontal, mesioangular and vertical position and less with presence of caries in third molar. There are caries lesions in distal second molars in mesioangular position when adjacent third molar is caries free.

Evaluation of five CAD/CAM materials by microstructural characterization and mechanical tests: a comparative in vitro study.

BACKGROUND: Polymer infiltrated ceramics and nano-ceramic resins are the new restorative materials which have been developed in order to enhance the adverse properties of glass-matrix ceramics and resin composites. The aim of the present in vitro study was to evaluate the characteristics of various CAD/CAM materials through mechanical, microstructural, and SEM analysis. METHODS: Five test groups (n = 22) were formed by using the indicated CAD/CAM blocks: VITA Enamic (VITA Zahnfabrik), Lava Ultimate (3 M ESPE), IPS e.max CAD (Ivoclar Vivadent), IPS Empress CAD (Ivoclar Vivadent), and VITA Mark II (VITA Zahnfabrik). Two specimens from each test group were used for XRD and EDS analysis. Remaining samples were divided into two subgroups (n = 10). One subgroup specimens were thermocycled (5 °C to 55 °C, 30s, 10,000 cycles) whereas the other were not. All of the specimens were evaluated in terms of flexural strength, Vickers hardness, and fracture toughness. Results were statistically analyzed using two-way ANOVA, one-way ANOVA, Tukey's HSD, and Student's t tests (α = .05). Fractured specimens were evaluated using SEM. RESULTS: The highest Vickers microhardness value was found for VITA Mark II (p < .001), however flexural strength and fracture toughness results were lowest conversely (p < .05). IPS e.max CAD was found to have the highest flexural strength (p < .001). Fracture toughness of IPS e.max CAD was also higher than other tested block materials (p < .001). Lava Ultimate and VITA Enamic's mechanical properties were affected negatively from thermocycling (p < .05). Microhardness, flexural strength, and fracture toughness values of Lava Ultimate and VITA Enamic were found to be similar to VITA Mark II and IPS Empress CAD groups. CONCLUSIONS: It should be realised that simulated aging process seem to affect ceramic-polymer composite materials more significantly than glass ceramics.

Early Bone Response to Dual Acid-Etched and Machined Dental Implants Placed in the Posterior Maxilla: A Histologic and Histomorphometric Human Study.

PURPOSE: To compare the early bone response to implants with dual acid-etched (DAE) and machined (MA) surface, when placed in the posterior human maxilla. MATERIALS AND METHODS: Fourteen patients received 2 implants in the posterior maxilla: 1 DAE and 1 MA. After 2 months, the implants were retrieved for histologic/histomorphometric evaluation. The bone-to-implant contact (BIC%), bone density in the threaded area (BDTA%), and the bone density (BD%) were calculated. The Wilcoxon matched-pairs signed rank test was used to evaluate differences (BIC%, BDTA%, and BD%) between the surfaces. RESULTS: In the MA implants, a mean (±SD) BIC%, BDTA%, and BD% of 21.76 (±12.79), 28.58 (±16.91), and 21.54 (±11.67), respectively, was reported. In the DAE implants, a mean (±SD) BIC%, BDTA%, and BD% of 37.49 (±29.51), 30.59 (±21.78), and 31.60 (±18.06), respectively, was reported. Although the mean BIC% of DAE implants value was almost double than that of MA implants, no significant differences were found between the 2 groups with regard to BIC% (P = 0.198) and with regard to BDTA% (P = 0.778) and BD% (P = 0.124). CONCLUSIONS: The DAE surface increased the periimplant endosseous healing properties in the native bone of the posterior maxilla.

Clinical applications and effectiveness of guided implant surgery: a critical review based on randomized controlled trials.

BACKGROUND: Nowadays implant placement protocols are widespread among clinicians all over the world. However, available literature, only partially analyses what can be potential benefits for the clinicians and patients, often focusing just on specific aspects, such as accuracy. The purpose of this review is to compare computer guided implant placement with conventional treatment protocols. METHODS: A search strategy according to the P-I-C-O format was developed and executed using an electronic MEDLINE plus manual search from 2000 up to December 2016. This review included only randomized controlled trials (RCTs) focusing on subjects treated with digital workflow for oral implant placement compared to conventional procedures. Data were extracted from eligible papers and analysed. All kinds of outcomes were considered, even patient-related and economical outcomes. RESULTS: The search strategy revealed 16 articles; additional manual searches selected further 21 publications. Afterwards the evaluation of articles, only two studies could be selected for subsequent data extraction. The two identified RCTs analysed primary outcomes as prosthesis failure, implant failure, biological or prosthetic complications, and secondary outcomes as periimplant marginal bone loss. One RCT evaluated also the duration of treatment, post-surgical progress, additional treatment costs and patient satisfaction. The other RCT focused instead on evaluating eventual improvement of patient's quality of life. In both selected studies, were not observed by the authors statistically significant differences between clinical cases treated with digital protocols and those treated with conventional ones. In one RCT, however post-surgical progress evaluation showed more patients' self-reported pain and swelling in conventional group. CONCLUSIONS: Within the limitation of this review, based on only two RCTs, the only evidence was that implant survival rate and effectiveness are similar for conventional and digital implant placement procedures. This is also confirmed by many other studies with however minor scientific evidence levels. Reduction of post-operative pain, surgical time and overall costs are discussed. Authors believe that scientific research should focus more in identifying which clinical situations can get greatest benefits from implant guided surgery. This should be done with research protocols such as RCT that assess comprehensively the advantages and disadvantages of fully digital surgical protocols.

Esthetic assessment of immediately restored implants combined with GBR and free connective tissue graft.

AIM: Esthetic assessment of immediately restored implants combined with GBR and free connective tissue (CT) graft METHODS: A case-control, retrospective study involving 34 patients treated with maxillary anterior single implants, immediately placed and restored. Clinical and esthetic results were analyzed using standard clinical examination and a comprehensive index, comprising pink esthetic and white esthetic scores (PES/WES). The height of the implant crown and the corresponding height of the contralateral tooth crown were measured to identify mucosal recessions. The distance from the mucosal margin to the implant shoulder (DIM) was measured on the master model. RESULTS: Thirty of 34 implants fulfilled the strict success criteria set for dental implants with regard to osseointegration. Success was defined as implants with bone loss not exceeding 1.5 mm during the first year and loosing not more than 0.2 for each successive year. The other four implants were stable but did not meet the bone loss criteria mentioned above and defined as survived implants. Mean PES/WES was 14.44 ± 2.34 (range: 9-20). Mean PES was 7.12 ± 1.89 (range: 1-10). The highest mean values were achieved for the variable of root convexity/soft tissue color and texture (1.71 ± 0.46) whereas the mesial papilla (1.09 ± 0.62) proved to be the least pleasing. The mean WES was 7.32 ± 1.25 (range: 5-10). The difference between IC and contralateral TC was 0.54 mm. The mean value for the facial DIM was 3.82 ± 0.87 mm. CONCLUSIONS: An evaluation of soft and hard tissue augmentation in immediately restored immediate implant procedures was employed to obtain stable hard and soft tissues. The combined GBR and CT graft procedure achieved favorable peri-implant soft tissue condition and esthetic results. However, recession and incomplete papillas were frequently observed.

Botulinum Toxin Type A as Preoperative Treatment for Immediately Loaded Dental Implants Placed in Fresh Extraction Sockets for Full-Arch Restoration of Patients With Bruxism.

OBJECTIVES: The aim of the present report was to describe the use of Botulinum toxin type A as preoperative treatment for immediately loaded dental implants placed in fresh extraction sockets for full-arch restoration of patients with bruxism. METHODS: Patients with bruxism who were scheduled to receive immediately loaded full-arch implant supported fixed restorations were included in this retrospective clinical report. To reduce the occlusal forces applied in patients with bruxism, Botulinum toxin type A was introduced prior to the implant placement procedure. Patients were followed and implant survival as well as peri-implant bone level was assessed in each periodic follow-up visit. Adverse effects were also recorded. A control group with no use of Botulinum toxin was evaluated as well. RESULTS: A total of 26 patients (13 test and 13 control), with bruxism, aged 59.15 ±â€Š11.43 years on average were included in this retrospective report and received immediately loaded dental implants placed in fresh extraction sockets for full-arch restoration. The test group treatment preceded by Botulinum toxin type A injection. Maxillary arches were supported by 8 to 10 implants while the mandibular arch was supported by 6 implants. All surgeries went uneventfully and no adverse effects were observed. The average follow-up time was 32.5 ±â€Š10.4 months (range, 18-51). In the test group, no implant failures were recorded. One patient presented with 1 to 2 mm bone loss around 4 of the implants; the other implants presented with stable bone level. In the control group 1 patient lost 2 implants and another demonstrated 2 mm bone loss around 3 of the implants. CONCLUSIONS: The preoperative use of Botulinum toxin in patients with bruxism undergoing full-arch rehabilitation using immediately loaded dental implants placed in fresh extraction sockets seems to be a technique that deserves attention. Further long-term, large-scale randomized clinical trials will help to determine the additional benefit of this suggested treatment modality.

Clinical, Histological, and Histomorphometric Evaluation of Demineralized Freeze-Dried Cortical Block Allografts for Alveolar Ridge Augmentation.

Autogenous bone-block grafts are the "gold standard" for block bone grafting, but have several disadvantages. Allografts have the potential to overcome these disadvantages. The purpose of this study was to evaluate the clinical and histomorphometric features of demineralized freeze-dried cortical block allografts (DCBA) used for ridge augmentation. Eleven patients who showed bone deficiencies of <5 mm in the horizontal plane were included in this study. The recipient sites were reconstructed with DCBA. The primary outcomes of interest were bone-width measurements, postoperative clinical evaluations, and histomorphometric analysis of the biopsy samples collected during the implant surgery. Clinical analysis showed that the mean gain in horizontal bone was 1.65 ±â€Š0.14 mm, and that the mean percentage of graft resorption was 5.39 ±â€Š2.18%. On postoperative day 7, edema, pain, and bruising were observed in 18.2%, 0%, and 9.1% of the patients, respectively. In the biopsy samples, the mean percentages of newly formed bone, residual block allograft, and marrow and connective tissue were 40.30 ±â€Š24.59%, 40.39 ±â€Š21.36%, and 19.30 ±â€Š15.07%, respectively. All of the block grafts were successfully integrated into the recipient sites. DCBA may be a viable alternative for treating both deficient maxillary and mandibular alveolar ridges.

Comparison of Two Techniques for Lateral Ridge Augmentation in Mandible With Ramus Block Graft.

UNLABELLED: The purpose of this manuscript was to assess mandibular ramus block grafts used for augmentation of mandibular posterior segments, followed by subsequent implant placement. Twenty-four human subjects in need of lateral ridge mandibular augmentation were included in the current patient series. INCLUSION CRITERIA: recipient site had at least 10-mm residual height, but less than 4.3-mm bucco-lingual dimension. Autogenous bone blocks were harvested from the mandibular ramus. In the first group ramus block was used in association with platelet-rich fibrin and in the second in association with pericardium membrane. Implant surgery was performed 4 months after bone graft surgery when a total number of 44 implants were placed. Abutments were placed 4 months after implant surgery followed by final restoration. Ramus bone graft was successful in 100% patients for the first group and in 91.67% patients for the second group. Measurement on cone beam computed tomography revealed an average of 5.35 mm of lateral ridge augmentation for group 1 and 5.099 mm for group 2, achieved 4 months after surgery. All implants placed received fixed prosthetic restorations and are in use. Ramus block grafts can be used to allow optimal implant placement, with favor long-term success. Lateral ridge augmentation using mandibular ramus bone graft in association with platelet-rich fibrin is a more predictable and successful technique.

How Patients Percept Their Recovery Following Impacted Mandibular Third Molar Coronectomy.

OBJECTIVES: To compare the quality of life (QOL), side effects, risks, and complications following mandibular third molar coronectomy compared with conventional third molar extraction. METHODS: Sixty-nine patients referred for extraction of impacted mandibular third molars were prospectively studied. The decision to perform coronectomy was made according to radiological data indicative of a risk for inferior alveolar nerve injury. The patients were asked to fill out a questionnaire on their QOL during the first postoperative week, and the surgeon was asked to fill out a questionnaire on these patients' demographic, clinical, and radiological details as well as surgery-related data. The study participants were followed up for at least 1 year postoperatively. RESULTS: Thirty-four of the 69 patients underwent coronectomy (study group) and 35 underwent full extraction (control group(. There was no group difference in QOL scores during the first postoperative week. There was no patient of nerve injury in either group. No complications were found in the postoperative period. Two patients of coronectomy necessitate residual tooth removal prior to planned orthodontic treatment. CONCLUSIONS: These patients' QOL are similar to those for patients following total extraction. No difference in side effects following procedure was found between coronectomy and total extraction. CLINICAL RELEVANCE: Coronectomy of impacted mandibular third molars may be offered instead of total extraction in patients presenting radiological characteristics of root proximity to the inferior alveolar nerve.

Evaluation of Volumetric Changes of Augmented Maxillary Sinus With Different Bone Grafting Biomaterials.

Extensive alveolar bone resorption because of pneumatized maxillary sinus is a common problem that limits dental implant placement. Maxillary sinus floor augmentation (MSFA) is an accepted treatment protocol that provides sufficient bone volume. The aim of this study was to evaluate the percentage of graft volume reduction following MSFA using cone beam computed tomography. In this retrospective study, cone beam computed tomography scans of MSFA were measured to evaluate the volume of the grafted sinus with deproteinized bovine bone (DBB), mineralized allograft (MA), or a mixture of MA and demineralized allograft as a composite. The volumetric changes in sinus augmentation between 2 weeks (T-I) and 6 months (T-II) after operation were analyzed. Thirty-nine patients were included in this study. The average percent volume reduction was 8.14 ±â€Š3.76%, 19.38 ±â€Š9.22%, and 24.66 ±â€Š4.68% for DBB, MA, and composite graft, respectively. A significant graft volume reduction was found between T-I and T-II for all groups (P < 0.01). The DBB group showed the least volume reduction (P < 0.01). Biomaterials can influence the bone graft volume change before implant placement. Deproteinized bovine bone may offer greater volume stability during healing than mineralized and composite allografts.

Segmental Dento-alveolar Intrusive Osteotomy in Posterior Maxilla with Lack of Inter-arch Distance for Prosthetic Rehabilitation. A Technique Combined with Sinus Floor Elevation.

UNLABELLED: The aim of this paper is to present a technique for segmental dento-alveolar intrusive osteotomy in a posterior maxilla with lack of inter-arch distance for prosthetic rehabilitation combined with sinus floor elevation. METHODS: A full thickness flap is elevated exposing the lateral wall of the maxillary sinus. A lateral window is opened and the Schneiderian membrane elevated. Segmental dento-alveolar osteotomy is performed. After complete detachment of the segment, it is adapted and fixed to the new position using the pre-prepared guide, making sure not to damage or perforate the Schneiderian membrane. RESULTS: Four cases of segmental dento-alveolar intrusive osteotomy in a posterior maxilla combined with sinus floor elevation were performed utilizing the above-mentioned technique. All surgeries went according to plan, and healing was uneventful except for swelling and pain that lasted for 10-14 days post- operatively. The opposing dentition was later treated by implant placement. The average follow-up time for those cases was 5.4 months. Vitality test four months after surgery was positive. CONCLUSION: The presented technique for segmental dento-alveolar intrusive osteotomy combined with sinus floor elevation can serve as a viable treatment option in the posterior maxilla with lack of inter-arch distance due to severe overeruption.