Strong two photon absorption and photophysical properties of symmetrical chromophores with electron accepting edge substituents.

Two photon absorption (TPA) and photophysical properties of three new symmetrical chromophores with electron accepting phthalimide edge substituents have been studied. The three chromophores contain fluorene, alcoxy-substituted divinyl benzene, and carbazole moieties as central cores, respectively. The femtosecond time-resolved fluorescence upconversion spectroscopy and two photon excited fluorescence technique have been carried out. The effect of solvent polarity on TPA and on photophysics has also been determined. Ultrafast fluorescence dynamics, with decay times ranging from 1 to 13 ps, are revealed in polar solvents. This is attributed to the relaxation of the chromophores to the intramolecular charge transfer state. The chromophore bearing fluorene central core, being of the type A-pi-A, is the most efficient concerning TPA. Strong TPA, with a cross section value as high as 2100 GM at an excitation wavelength of 770 nm is found in acetophenone which is a solvent of intermediate polarity. The TPA spectra were also reproduced using a sum over states three-state model. A study of the TPA induced photobleaching of the fluorene molecule, doped in a solid poly(methyl-methacrylate) film, has shown that this material is very promising for efficient TPA optical data storage.

Synthesis and photophysical characteristics of 2,7-fluorenevinylene-based trimers and their electroluminescence.

Three new 2,7-fluorenevinylene-based trimers were synthesized and characterized. The synthesis was carried out by the Heck coupling reaction of 9,9-dihexyl-2,7-divinylfluorene with 2-(4-bromophenyl)-5-phenyl-1,3,4-oxadiazole, N,N-diphenyl-4-bromoaniline, or 3-bromopyrene to afford the trimers OXD, TPA, and PYR, respectively. All the trimers were readily soluble in common organic solvents such as tetrahydrofuran, dichloromethane, chloroform, and toluene. Their glass transition temperatures ranged from 33 to 60 degrees C. The UV-vis spectra showed an absorption maximum at lambda(a,max) = 379-417 nm with optical band gap of Eg = 2.47-2.66 eV. In solution, they emitted strong blue-green photoluminescence (PL) with PL maximum at lambda(f,max) = 455-565 nm and fluorescence quantum yield of Phi(f) = 0.65-0.74. On the other hand, in their spin-coated films, the PL efficiencies significantly decreased due to the presence of concentration quenching. All samples showed nanosecond transient lifetime containing two components, suggesting excimer formation. The organic light-emitting diodes (OLEDs) with OXD and TPA showed green emission with electroluminescence (EL) quantum efficiencies of eta(EL) approximately 10(-2)%, while very weak EL efficiency of eta(EL) approximately 10(-5)% was observed with PYR. The highest occupied molecular orbital (HOMO) levels of the films were found to be 5.05-5.75 eV.

Substituent effect on the photobleaching of pyrylium salts under ultrashort pulsed illumination.

The current article presents the photobleaching properties of a group of pyrylium salts under ultrashort pulsed illumination. These pyrylium salts have the same basic chemical structure and differ only by a specific substituent. It is proven experimentally that two different mechanisms are simultaneously present to the photobleaching of all molecules studied (independently of their specific chemical structure). However, the particular parameters of each mechanism are influenced significantly by the substituent change. The experimental investigation of these parameters showed the presence of multiphoton interactions in the photobleaching of pyrylium salts depending essentially on the specific substituent.

Femtosecond time resolved fluorescence dynamics of a cationic water-soluble poly(fluorenevinylene-co-phenylenevinylene).

A recently synthesized cationic water-soluble poly(fluorenevinylene-co-phenylenevinylene) was studied by means of steady state and femtosecond time resolved upconversion spectroscopy in aqueous and EtOH solutions. Steady state spectroscopic measurements showed that the polymer emits at the blue-green spectral region and that aggregates are formed in concentrated polymer solutions. The fluorescence dynamics of the polymer in concentrated solutions, studied at a range of emission wavelengths, exhibited a wavelength dependent and multiexponential decay, indicating the existence of various decay mechanisms. Specifically, a rapid decay at short emission wavelengths and a slow rise at long wavelengths were observed. Both features reveal an energy transfer process from isolated to aggregated chains. The contribution of the energy transfer process as well as of the isolated chains and the aggregates on the overall fluorescence decay of the polymer was determined. The dependence of the energy transfer rate and efficiency on polymer concentration was also examined.

Effect of solvent and subsequent thermal annealing on the performance of phenylenevinylene copolymer: PCBM solar cells.

The morphology of the photoactive layer used in the bulk heterojunction photovoltaic devices is crucial for efficient charge generation and their collection at the electrodes. We investigated the solvent vapor annealing and thermal annealing effect of an alternating phenylenevinylene copolymer P:PCBM blend on its morphology and optical properties. The UV-visible absorption spectroscopy shows that both solvent and thermal annealing can result in self-assembling of copolymer P to form an ordered structure, leading to enhanced absorption in the red region and hole transport enhancement. By combining the solvent and thermal annealing of the devices, the power conversion efficiency is improved. This feature was attributed to the fact that the PCBM molecules begin to diffuse into aggregates and together with the ordered copolymer P phase form bicontinuous pathways in the entire layer for efficient charge separation and transport. Furthermore, the measured photocurrent also suggests that the space charges no longer limit the values of the short circuit current (J(sc)) and fill factor (FF) for solvent-treated and thermally annealed devices. These results indicate that the higher J(sc) and PCE for the solvent-treated and thermally annealed devices can be attributed to the phase separation of active layers, which leads to a balanced carrier mobility. The overall PCE of the device based on the combination of solvent annealing and thermal annealing is about 3.7 %.

Novel p-phenylenevinylene compounds containing thiophene or anthracene moieties and cyano-vinylene bonds for photovoltaic applications.

Two novel soluble compounds T and A that contain a central dihexyloxy-p-phenylenevinylene unit, intermediate moieties of thiophene or anthracene, respectively, and terminal cyano-vinylene nitrophenyls were synthesized and characterized. They showed moderate thermal stability and relatively low glass transition temperatures. These compounds displayed similar optical properties. Their absorption was broad and extended up to about 750 nm with the longer-wavelength maximum around 640 nm and an optical band gap of approximately 1.70 eV. From the current-voltage characteristics of the devices using both compounds T and A, it was concluded that both compounds behave as p-type organic semiconductors with hole mobility on the order of 10(-5) cm(2)/(V s). The power conversion efficiency (PCE) of the devices based on these compounds was 0.019% and 0.013% for compounds A and T, respectively. When compounds A and T were blended with [6,6]-phenyl-C61-butyric acid methyl ester (PCBM), the PCE dramatically increased up to 1.66% and 1.36% for devices with A:PCBM and T:PCBM, respectively. The efficiencies of the devices were further enhanced upon thermal annealing up to 2.49% and 2.33% for devices based on A:PCBM and T:PCBM, respectively.

Effect of the incorporation of a low-band-gap small molecule in a conjugated vinylene copolymer: PCBM blend for organic photovoltaic devices.

The effect of the incorporation of a low-band-gap small-molecule BTD-TNP on the photovoltaic properties of vinylene copolymer P:PCBM bulk heterojunction solar cells has been investigated. The introduction of this small molecule increases both the short-circuit photocurrent and the overall power conversion efficiency of the photovoltaic device. The incident photon-to-current efficiency (IPCE) of the device based on P:PCBM:BTD-TNP shows two distinct bands, which correspond to the absorption bands of P:PCBM and BTD-TNP. Furthermore, it was found that the IPCE of the device has also been enhanced even at the wavelengths corresponding to the absorption band of P:PCBM, when the thermally annealed blend was used in the device. This indicates that the excitons that are generated in copolymer P are dissociated into charge carriers more effectively in the presence of the BTD-TNP small molecule at the copolymer P:PCBM interface by energy transfer from P to the small molecule. Therefore, we conclude that the BTD-TNP small molecule acts as light-harvesting photosensitizer and also provides a path for the generated exciton in copolymer P toward the P:PCBM interface for efficient charge separation. The overall power conversion efficiency for the P:PCBM:BTD-TNP photovoltaic device is about 1.27%, which has been further enhanced up to 2.6%, when a thermally annealed blend layer is used.