Multiscale embedded printing of engineered human tissue and organ equivalents.

Creating tissue and organ equivalents with intricate architectures and multiscale functional feature sizes is the first step toward the reconstruction of transplantable human tissues and organs. Existing embedded ink writing approaches are limited by achievable feature sizes ranging from hundreds of microns to tens of millimeters, which hinders their ability to accurately duplicate structures found in various human tissues and organs. In this study, a multiscale embedded printing (MSEP) strategy is developed, in which a stimuli-responsive yield-stress fluid is applied to facilitate the printing process. A dynamic layer height control method is developed to print the cornea with a smooth surface on the order of microns, which can effectively overcome the layered morphology in conventional extrusion-based three-dimensional bioprinting methods. Since the support bath is sensitive to temperature change, it can be easily removed after printing by tuning the ambient temperature, which facilitates the fabrication of human eyeballs with optic nerves and aortic heart valves with overhanging leaflets on the order of a few millimeters. The thermosensitivity of the support bath also enables the reconstruction of the full-scale human heart on the order of tens of centimeters by on-demand adding support bath materials during printing. The proposed MSEP demonstrates broader printable functional feature sizes ranging from microns to centimeters, providing a viable and reliable technical solution for tissue and organ printing in the future.

Mechanical analysis of radial performance in biodegradable polymeric vascular stents manufactured using micro-injection molding.

Micro-injection molding (MiM) is a promising technique for manufacturing biodegradable polymeric vascular stents (BPVSs) at scale, in which a trapezoidal strut cross section is needed to ensure high-quality de-molding. However, there is a lack of research on the influence of the strut cross-sectional shape on its mechanical properties, posing a challenge in determining the key geometries of the strut when using MiM to produce BPVSs. Hence, this work has investigated the relationships between the geometry parameters, including the de-molding angle, and the radial support property of BPVSs using the finite element method. The results reveal that the radial stiffness of BPVSs is significantly affected by the de-molding angle, which can be counteracted by adjusting strut height, bending radius, and strut thickness. Stress distribution analysis underscores the crucial role of the curved portion of the support ring during compression, with the inner side of the curved region experiencing stress concentration. A mathematical model has been established to describe the relationships between the geometry parameters and the radial support property of the BPVSs. Notably, the radius of the neutral layer emerges as a key determinant of radial stiffness. This study is expected to serve as a guideline for the development of BPVSs that can be manufactured using MiM.

Sacrificial scaffold-assisted direct ink writing of engineered aortic valve prostheses.

Heart valve disease has become a serious global health problem, which calls for numerous implantable prosthetic valves to fulfill the broader needs of patients. Although current three-dimensional (3D) bioprinting approaches can be used to manufacture customized valve prostheses, they still have some complications, such as limited biocompatibility, constrained structural complexity, and difficulty to make heterogeneous constructs, to name a few. To overcome these challenges, a sacrificial scaffold-assisted direct ink writing approach has been explored and proposed in this work, in which a sacrificial scaffold is printed to temporarily support sinus wall and overhanging leaflets of an aortic valve prosthesis that can be removed easily and mildly without causing any potential damages to the valve prosthesis. The bioinks, composed of alginate, gelatin, and nanoclay, used to print heterogenous valve prostheses have been designed in terms of rheological/mechanical properties and filament formability. The sacrificial ink made from Pluronic F127 has been developed by evaluating rheological behavior and gel temperature. After investigating the effects of operating conditions, complex 3D structures and homogenous/heterogenous aortic valve prostheses have been successfully printed. Lastly, numerical simulation and cycling experiments have been performed to validate the function of the printed valve prostheses as one-way valves.

3D printing-based full-scale human brain for diverse applications.

Surgery is the most frequent treatment for patients with brain tumors. The construction of full-scale human brain models, which is still challenging to realize via current manufacturing techniques, can effectively train surgeons before brain tumor surgeries. This paper aims to develop a set of three-dimensional (3D) printing approaches to fabricate customized full-scale human brain models for surgery training as well as specialized brain patches for wound healing after surgery. First, a brain patch designed to fit a wound's shape and size can be easily printed in and collected from a stimuli-responsive yield-stress support bath. Then, an inverse 3D printing strategy, called "peeling-boiled-eggs," is proposed to fabricate full-scale human brain models. In this strategy, the contour layer of a brain model is printed using a sacrificial ink to envelop the target brain core within a photocurable yield-stress support bath. After crosslinking the contour layer, the as-printed model can be harvested from the bath to photo crosslink the brain core, which can be eventually released by liquefying the contour layer. Both the brain patch and full-scale human brain model are successfully printed to mimic the scenario of wound healing after removing a brain tumor, validating the effectiveness of the proposed 3D printing approaches.

Material Extrusion of Helical Shape Memory Polymer Artificial Muscles for Human Space Exploration Apparatus.

Astronauts suffer skeletal muscle atrophy in microgravity and/or zero-gravity environments. Artificial muscle-actuated exoskeletons can aid astronauts in physically strenuous situations to mitigate risk during spaceflight missions. Current artificial muscle fabrication methods are technically challenging to be performed during spaceflight. The objective of this research is to unveil the effects of critical operating conditions on artificial muscle formation and geometry in a newly developed helical fiber extrusion method. It is found that the fiber outer diameter decreases and pitch increases when the printhead temperature increases, inlet pressure increases, or cooling fan speed decreases. Similarly, fiber thickness increases when the cooling fan speed decreases or printhead temperature increases. Extrusion conditions also affect surface morphology and mechanical properties. Particularly, extrusion conditions leading to an increased polymer temperature during extrusion can result in lower surface roughness and increased tensile strength and elastic modulus. The shape memory properties of an extruded fiber are demonstrated in this study to validate the ability of the fiber from shape memory polymer to act as an artificial muscle. The effects of the operating conditions are summarized into a phase diagram for selecting suitable parameters for fabricating helical artificial muscles with controllable geometries and excellent performance in the future.

Three-Dimensional Printing in Stimuli-Responsive Yield-Stress Fluid with an Interactive Dual Microstructure.

Yield-stress support bath-enabled three-dimensional (3D) printing has been widely used in recent years for diverse applications. However, current yield-stress fluids usually possess single microstructures and still face the challenges of on-demand adding and/or removing support bath materials during printing, constraining their application scope. This study aims to propose a concept of stimuli-responsive yield-stress fluids with an interactive dual microstructure as support bath materials. The microstructure from a yield-stress additive allows the fluids to present switchable states at different stresses, facilitating an embedded 3D printing process. The microstructure from stimuli-responsive polymers enables the fluids to have regulable rheological properties upon external stimuli, making it feasible to perfuse additional yield-stress fluids during printing and easily remove residual fluids after printing. A nanoclay-Pluronic F127 nanocomposite is studied as a thermosensitive yield-stress fluid. The key material properties are characterized to unveil the interactions in the formed dual microstructure and microstructure evolutions at different stresses and temperatures. Core scientific issues, including the filament formation principle, surface roughness control, and thermal effects of the newly added nanocomposite, are comprehensively investigated. Finally, three representative 3D structures, the Hall of Prayer, capsule, and tube with changing diameter, are successfully printed to validate the printing capability of stimuli-responsive yield-stress fluids for fabricating arbitrary architectures.

A multi-dimensional non-uniform corrosion model for bioabsorbable metallic vascular stents.

Bioabsorbable metallic vascular stents (BMVSs) are an innovative technological advancement in the medical engineering field of vascular implants. BMVSs have great potential to revolutionize vascular intervention, but the lack of understanding of the construction material's natural corrosion within the body inhibits the use in clinical medicine. In this study, a corrosion function concept for in vivo implants was created to develop a multi-dimensional, non-uniform corrosion model with a larger goal of simulating the mechanical integrity of BMVSs. This proposed corrosion model simulates the corrosion rate and its effects on magnesium (Mg) alloy AZ31 based on continuum damage mechanics. The model was calibrated using three degradation experiments on Mg alloy specimens. These experiments focused on multi-dimensional corrosion, mass loss rate, and mechanical integrity during the corrosion process. Lastly, to verify the applicability of the proposed model, the resulting corrosion behaviors and mechanical characteristics of the BMVSs were implemented into a finite element framework to produce an overarching simulation of the BMVS's degradation in vivo. The results of the experiments and simulations revealed a proportional link between the corrosion of BMVSs and the number of exposed surfaces. A non-linear decline in mechanical integrity with increasing mass loss was also discovered through experimentation and modeling. Furthermore, the model and simulation can provide some details about changes in morphology and mechanics during BMVS corrosion. This work gives new insights into accurately modeling for BMVS degradation and can be used to optimize product development of BMVSs. STATEMENT OF SIGNIFICANCE: Bioabsorbable metallic vascular stents (BMVSs) are an innovative technological advancement in the medical engineering field of vascular implants. Despite BMVSs have great potential to revolutionize vascular intervention, the lack of understanding of the construction material's natural corrosion within the body inhibits their use in clinical medicine. In this study, a novel multi-dimensional non-uniform corrosion model was proposed to unveil the mechanisms during the in vivo degradation of bioabsorbable metallic implants, which can accurately capture the overlooked changes in morphology and mechanics during BMVS corrosion. This work provides a technical solution to enhance the modeling accuracy in BMVS degradation and can be further used to optimize the design of BMVSs in the future.

Fluid Bath-Assisted 3D Printing for Biomedical Applications: From Pre- to Postprinting Stages.

Fluid bath-assisted three-dimensional (3D) printing is an innovative 3D printing strategy that extrudes liquid ink materials into a fluid bath to form various 3D configurations. Since the support bath can provide in situ support, extruded filaments are able to freely construct complex 3D structures. Meanwhile, the supporting function of the fluid bath decreases the dependence of the ink material's cross-linkability, thus broadening the material selections for biomedical applications. Fluid bath-assisted 3D printing can be divided into two subcategories: embedded 3D printing and support bath-enabled 3D printing. This review will introduce and discuss three main manufacturing processes, or stages, for these two strategies. The stages that will be discussed include preprinting, printing, and postprinting. In the preprinting stage, representative fluid bath materials are introduced and the bath material preparation methods are also discussed. In addition, the design criteria of fluid bath materials including biocompatibility, rheological properties, physical/chemical stability, hydrophilicity/hydrophobicity, and other properties are proposed in order to guide the selection and design of future fluid bath materials. For the printing stage, some key technical issues discussed in this review include filament formation mechanisms in a fluid bath, effects of nozzle movement on printed structures, and design strategies for printing paths. In the postprinting stage, some commonly used postprinting processes are introduced. Finally, representative biomedical applications of fluid bath-assisted 3D printing, such as standalone organoids/tissues, biomedical microfluidic devices, and wearable and bionic devices, are summarized and presented.