Sealing of restorations with marginal defects does not affect their longevity.

PURPOSE: To evaluate sealed amalgam and resin-based composite restorations after 12 years to determine whether sealing minor defects (micro-repairs) enhanced the longevity of restorations. METHODS: 34 subjects aged 18-80 were recruited. This sample group underwent 137 restorations, including 51 resin-based composite (RC) and 86 amalgam (AM) restorations. Existing restorations with localized, marginal defects were assigned to one of two groups: (a) the Sealing group (n=48, 27 AM; 21 RC) or (b) the Control group (n=89, 59 AM; 30 RC). The quality of each restoration was scored according to the modified USPHS criteria by two examiners at the beginning of the study and after 1-5, 10, and 12 years. Kaplan Meier survival curves were created and a Cox regression was applied to investigate survival variables. Mantel Cox, Wilcoxon, and Friedman tests were performed for comparisons within groups. RESULTS: After 12 years, no statistically significant differences were observed for the variables "restorative material" (P= 0.538) or "sealing yes/no" (P= 0.136) with respect to the longevity of the restorations. All groups behaved similarly with regard to marginal adaptation, secondary caries, and tooth sensitivity (P≥ 0.05). Cumulatively, after a 12-year observation period, sealing minor restoration defects did not affect the longevity of the restorations. CLINICAL SIGNIFICANCE: Sealing minor marginal defects for resin composites or amalgam restorations did not affect their longevity. This intervention may be considered over-treatment for patients with low-to-medium risks for developing dental caries.

Long-term Performance of Refurbished Amalgam Restorations: 10-year Follow-up.

PURPOSE: This prospective, blinded clinical trial assessed the performance of amalgam restorations that were refurbished, replaced, or not treated. MATERIALS AND METHODS: Twenty-three patients were included, ages 18-80 years, with 63 amalgam restorations that had one or more defects in their clinical features, such as defective anatomic form, roughness and/or luster according to United State Public Health Service (USPHS) criteria. Restorations were randomly assigned to either refurbishment (A: n = 21), replacement (B: n = 21) or untreated (C: n = 21) groups. Two calibrated examiners evaluated the restorations at baseline (Kappa = 0.74) and after 10 years (Kappa = 0.84), according to eight parameters: anatomy, roughness, luster, secondary caries, marginal adaptation, occlusal contact, marginal staining and tooth sensitivity. Wilcoxon tests were performed for within-group comparisons, and Friedman tests were used for multiple within-group comparisons. The Mantel-Cox test was used to compare survival curves. RESULTS: After 10 years, 49 restorations (77.8%) were assessed (group A: n = 19; group B: n = 13; group C: n = 17). Over a decade, the three groups showed similar clinical performances for all studied parameters: anatomy (p = 0.410), roughness (p = 0.930), luster (p = 0.984), secondary caries (p = 1.0), marginal adaptation (p = 0.433), occlusal contact (p = 0.33), marginal staining (p = 0.470), and tooth sensitivity (p = 0.784). CONCLUSIONS: Amalgam restorations that have defective anatomic form, roughness and/or luster performed similarly for all studied parameters, whether they were refurbished, replaced or left untreated after 10 years in patients with low and intermediate caries risk. Most of the restorations were classified as clinically acceptable after ten years. Restorations in all three groups tended to deteriorate over time.

Does refurbishing composites lead to short-term effects or long-lasting improvement?

PURPOSE: To evaluate the clinical performance of refurbished resin composite restorations compared to untreated (negative control) restorations over a period of 10 years. METHODS: 26 subjects (having a total of 52 composite restorations) were recruited. All restorations in the refurbished group showed clinical features rated bravo according to modified USPHS criteria. Untreated restorations were those that had been deemed acceptable (alpha or bravo rated); these were used as controls. Two examiners performed assessments at baseline and during the 5th and 10th years after the intervention. Wilcoxon tests were performed for within-group comparisons, Friedman tests were used for multiple within-group comparisons, and Mann Whitney tests were used for between-groups comparisons. Kaplan-Meier survival curves were calculated, and the Mantel-Cox test was used to compare curves. P < 0.05 was considered statistically significant. RESULTS: In both groups, 10-year scores were significantly different from baseline scores in all clinical parameters except secondary caries. There were no statistically significant differences in the survival analysis of groups (log-rank test, P = 0.376). Refurbishing treatment improved the anatomy, roughness, luster, and marginal adaptation of restorations with a short-term effect, with most properties rated acceptable after 10 years of clinical service. The clinical characteristics were similar for all groups at the 10th year.

Comparison of digitally assessed quality of posterior crown preparations performed with and without previous practice on patient-specific three-dimensional-printed teeth models.

INTRODUCTION: Three-dimensional (3D)-printing technology can provide customizable simulations, but its effects on patient care quality have not been well studied. This study aimed to assess the impact of practicing with patient-specific 3D-printed teeth models on the quality of patients' dental preparations performed by students transitioning to clinical training. Accordingly, the quality of posterior crown preparations was evaluated by objectively analyzing digital scans and grades in two groups: the study group, which practiced beforehand with patient-specific 3D-printed teeth models, and the control group, which did not practice with these models. METHODS: All 78 fourth-year dental students who had just finished their fixed prosthodontics course at the simulation laboratory with training on phantom heads and without previous clinical experience in crown preparations were invited to participate in the study. Sixty-eight agreed to take part and were randomly divided into a study group that practiced crown preparations on 3D-printed models of their own patient's teeth and a control group that did not practice with 3D-printed models and started their clinical work straightforwardly after simulation training. Students completed validated perception questionnaires on self-confidence and clinical skills before and after the protocol, which were compared using a chi-squared test. Crown preparations performed on 3D-printed models and then on patients were digitally scanned and objectively graded by prepCheck software for critical parameters, such as undercuts, taper, and occlusion reduction. Non-parametric tests were used to compare preparations on 3D-printed models and on patients performed by the study group and those on patients made by the control group. RESULTS: Initially, both groups reported similar perceptions of self-confidence and clinical skills levels. The study group significantly improved both aspects after the protocol. Analysis of the scanned preparations demonstrated that the study group removed less tooth structure from actual patients than from the initial 3D-printed models. In contrast, the control group showed excess occlusal clearance in their patients compared to the study group. CONCLUSIONS: Practicing patient-specific 3D-printed teeth before performing procedures clinically appears to enhance preparation quality and minimize unnecessary tooth reduction in early clinical experiences.

Dentin hypersensitivity after teeth bleaching with in-office systems. Randomized clinical trial.

PURPOSE: To comparatively and prospectively compare in a randomized clinical trial, dentin hypersensitivity after treatment with three in-office bleaching systems, based on hydrogen peroxide at different concentrations, with and without light source activation. METHODS: 88 individuals were included according to inclusion and exclusion criteria. Subjects were randomly divided into the following three treatment groups: Group 1 was treated with three 15-minute applications of hydrogen peroxide at 15% with titanium dioxide (Lase Peroxide Lite) that was light-activated (Light Plus Whitening Lase) with five cycles of 1 minute and 30 seconds each cycle, giving a total treatment time of 45 minutes; Group 2 was treated with three 10-minute applications of hydrogen peroxide at 35% (Lase Peroxide Sensy), activated by light (LPWL) same activation cycles than Group 1, with a total treatment time of 30 minutes; Group 3 was treated with only one application for 45 minutes of hydrogen peroxide at 35% (Whitegold Office) without light activation. Each subject underwent one session of bleaching on the anterior teeth according to the manufacturers' instructions. Dentin sensitivity was recorded with a visual analogue scale (VAS) at baseline, immediately after, and at 7 and 30 days after treatment using a stimulus of an evaporative blowing triple syringe for 3 seconds on the upper central incisors from a distance of 1 cm. A Kruskal-Wallis test followed by Mann-Whitney test was performed for statistical analysis. RESULTS: All groups showed increased sensitivity immediately after treatment. Group 1 displayed less changes relative to baseline with no significant differences (P = 0.104). At 7 and 30 days after treatment, a comparison of VAS values indicated no significant differences between all groups (P = 0.598 and 0.489, respectively).

Influence of type of bur and acid etching on dentin hydraulic conductance.

The aim of this study was to compare ex vivo filtration rate (hydraulic conductance) in human dentin discs mechanically treated with diamond and carbide burs of different grain size with or without acid etching. Method: 60 healthy third molars, recently extracted from patients aged 18-30 years, were cleaned, disinfected (0.1% thymol) and embedded in epoxy resin blocks. Dentin discs were obtained by cutting the occlusal surface with cylindrical rotary instruments, forming nine groups containing 12 specimens each: 1: fine grain (FG); 2: medium grain (MG); 3: coarse grain (CG); 4: carbide (C) burs; 5: FG with acid etching (AE); 6: MG with AE; 7: CG with AE; 8: C with AE; 9: only AE. Hydraulic conductance was determined in the experimental model under constant pressure of 200mm H2O. No difference in hydraulic conductance was observed among dentin discs treated with different types of burs (p = 0.5). Differences were found in the hydraulic conductance of etched and non-etched dentin discs (p < 0.001). The type of mechanical bur treatment does not affect dentin hydraulic conductance. Acid etching significantly increases dentin hydraulic conductance.

A multidisciplinary approach for the diagnosis of hypocalcified amelogenesis imperfecta in two Chilean families.

OBJECTIVE: The purpose of this study was to conduct a multidisciplinary analysis of a specific type of tooth enamel disturbance (amelogenesis imperfecta) affecting two Chilean families to obtain a precise diagnosis and to investigate possible underlying mutations. MATERIALS AND METHODS: Two non-related families affected with amelogenesis imperfecta were evaluated with clinical, radiographic and histopathological methods. Furthermore, pedigrees of both families were constructed and the presence of eight mutations in the enamelin gene (ENAM) and three mutations in the enamelysin gene (MMP-20) were investigated by PCR and direct sequencing. RESULTS: In the two affected patients, the dental malformation presented as soft and easily disintegrated enamel and exposed dark dentin. Neither of the affected individuals presented with a dental and skeletal open bite. Histologically, a high level of an organic matrix with prismatic organization was found. Genetic analysis indicated that the condition is autosomal recessive in one family and either autosomal recessive or due to a new mutation in the other family. Molecular mutational analysis revealed that none of the eight mutations previously described in the ENAM gene or the three mutations in the MMP-20 gene were present in the probands. CONCLUSION: A multidisciplinary analysis allowed for a diagnosis of hypocalcified amelogenesis imperfecta, Witkop type III, which was unrelated to previously described mutations in the ENAM or MMP-20 genes.

Bond strength evaluation of nanohybrid resin-based composite repair.

The objectives of this study were to determine the shear bond strength of a nanohybrid resin-based composite (RBC) when repaired with three different RBCs and to test the hypothesis that the type of composite used to repair, aging, and surface treatment prior to bonding affect shear bond strength on repairs of nanohybrid RBCs. One hundred fifty cylinder specimens were built using a nanohybrid RBC (base cylinder). Half of these specimens were aged in distilled water for 24 hours at 37 degrees C, at which point the surface was roughened with abrasive discs, acid-etched, silanized, and adhesive-treated. The remaining 75 specimens were not aged and did not receive surface treatment. Over each base cylinder, both aged and nonaged, a new cylinder was built (repair cylinder) from either nanohybrid RBC (n = 25), microhybrid RBC (n = 25), or microfilled RBC (n = 25). All specimens were aged in distilled water for 24 hours at 37 degrees C and a shear bond strength test was performed. Results indicated that aging and surface treatment significantly affected the shear bond strength of repaired samples (P < 0.0001). All aged groups showed lower shear bond strengths than their matching nonaged group. The type of RBC also affected the shear bond strength (P < 0.0001). Repair with either a nanohybrid RBC or a microhybrid RBC demonstrated the highest shear bond strength, while the lowest shear bond strength was observed when the cylinder was repaired with a microfilled RBC.

Oxalic acid under adhesive restorations as a means to reduce dentin sensitivity: a four-month clinical trial.

The aim of this double-blind randomized controlled clinical trial was to evaluate the reduction of dentin sensitivity using an oxalate-based compound, placed under adhesive restorations, during a four-month period. One hundred three preoperatively sensitive teeth, on 36 patients aged 25-66 years (mean, 40.3±7), were included in the study. Group A (experimental) was treated with oxalic acid (BisBlock) before resin-based composite (RBC) restorations (n=52), and group B (control) was treated with distilled water before RBC restorations (n=51). The first tooth in each patient was randomly assigned to group A, and the second tooth received group B. Clinical evaluation as made by a thermal/evaporation test with an air syringe and measurement by visual analog scale (VAS) at baseline and four months after treatment. The results showed sensitivity reduction during the evaluation period (expressed in VAS values): group A, 7.6 to 0.8; group B, 7.3 to 2.6. We concluded from this study that both treatments reduced dentin sensitivity during the evaluation period, with group A showing significantly less dentin sensitivity after four months (p<0.05).

Association between disk position and degenerative bone changes of the temporomandibular joints: an imaging study in subjects with TMD.

The aim of this study was to determine the frequency and relationship between disk position and degenerative bone changes in the temporomandibular joints (TMJ), in subjects with internal derangement (ID). MRI and CT scans of 180 subjects with temporomandibular disorders (TMD) were studied. Different image parameters or characteristics were observed, such as disk position, joint effusion, condyle movement, degenerative bone changes (flattened, cortical erosions and irregularities), osteophytes, subchondral cysts and idiopathic condyle resorption. The present study concluded that there is a significant association between disk displacement without reduction and degenerative bone changes in patients with TMD. The study also found a high probability of degenerative bone changes when disk displacement without reduction is present. No association was found between TMD and condyle range of motion, joint effusion and/or degenerative bone changes. The following were the most frequent morphological changes observed: flattening of the anterior surface of the condyle; followed by erosions and irregularities of the joint surfaces; flattening of the articular surface of the temporal eminence, subchondral cysts, osteophytes; and idiopathic condyle resorption, in decreasing order.

Effect of omega-3 on painful symptoms of patients with osteoarthritis of the synovial joints: systematic review and meta-analysis.

OBJECTIVES: The aim of this study was to determine the effect of omega-3 on the painful symptomatology of osteoarthritis (OA) in synovial joints. STUDY DESIGN: An electronic/manual search was conducted (2004-2019). Using pain as a primary outcome and stiffness/function and swelling as secondary outcomes, based on Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) criteria, Consolidated Standards of Reporting Trials (CONSORT) reporting quality, and Cochrane/RoB-2 risk of bias assessment. Data were processed using RevMan v5.2 (Cochrane Collaboration). RESULTS: Six randomized controlled trials were selected. The study population included 454 patients with OA. In 4 studies the pain in the intervention group presented significant pain reduction compared with the control group (mean difference = 22.89; 95% confidence interval, 3.37-42.42). Studies did not stablish the effective anti-inflammatory dose. The number of studies on stiffness/function and inflammation was low (n = 2). The evidence and degree of recommendation was 2B. The randomized controlled trials presented high clinical and methodological variability. CONCLUSION: Omega-3 can significantly reduce painful symptoms in patients suffering from OA in synovial joints. However, the limited number of studies, range of doses, intervention periods, baseline characteristics of patients, and asymmetry in reporting bias, combined with the heterogeneity in the combined effect of the studies, offer low-quality evidence on which clinical guidance cannot be based.

Increasing the longevity of restorations by minimal intervention: a two-year clinical trial.

UNLABELLED: This investigation assessed the effectiveness of alternative treatments for the replacement of amalgam and resin-based composite restorations. Sixty-six patients (age 18 to 80 years, mean = 26.6) with 271 (amalgam [n = 193] and resin-based composite [n = 78]) defective restorations were randomly assigned to one of five different treatment groups: A) Repair (n = 27); B) Sealing of margins (n = 48); C) Refurbishing (n = 73); D) Replacement (n = 42) and E) Untreated (n = 81). USPHS/Ryge criteria were used to determine the quality of the restorations. Two calibrated examiners (Cohen's Kappa 0.74) assessed the restorations independently at the beginning of the study (baseline) and at two years after treatment using seven parameters from the USPHS/Ryge criteria (Marginal Adaptation, Anatomic Form, Roughness, Marginal Stain, Occlusal Contact, Secondary Caries and Luster). RESULTS: Two-hundred and fifty-six restorations (178 amalgam and 78 resin-based composite) were examined at the two-year recall exam. The sealing of marginal defects showed significant improvements in marginal adaptation (p < 0.05). Refurbishing of the defective restorations significantly improved anatomic form (p < 0.0001), luster (p < 0.016), marginal adaptation (p < 0.003) and roughness (p < 0.0001). The repair significantly improved anatomic form (p < 0.002) and marginal stain (p < 0.002). Replacement showed significant improvements for all parameters (p < 0.05). The Untreated group showed significant deterioration on marginal adaptation (p < 0.013). CONCLUSIONS: The two-year recall examination showed that sealant, repair and refurbishing treatments improved the clinical properties of defective amalgam and resin-based composite restorations by increasing the longevity of the restorations with minimal intervention.

Comparación de sistemas de evaluación diagnóstica de la severidad de la osteoartrosis en imágenes de TAC de las ATM

Objetivo: Comparar y validar sistemas diagnósticos de severidad de Osteoartrosis (OA) de las articulaciones temporomandibulares (ATM) en imágenes de tomografía computada (TAC). Método: Se efectuó un estudio observacional, retrospectivo, analítico y ciego. Se evaluaron 99 pacientes (198TAC-ATM), aplicando los criterios de siete diferentes sistemas diagnósticos. Un clínico calibrado (K=0,7) efectuó las evaluaciones. La validez de contenido se efectuó bajo los criterios Ahmad. La consistencia interna se determinó con Alpha de Cronbach. Se correlacionaron los datos con Rho de Spearman. Resultados: La severidad de la erosión condilar presenta alta correlación positiva entre las clasificaciones Alexiou/Arayasantiparb (rho=0,986) y baja entre Cömert/Alexiou (rho=0,421) y Cömert/Arayasantiparb (rho=0,422). La esclerosis condilar presentó fuerte correlación entre las clasificaciones de Cömert/Alexiou, Masilla/Alexiou y Cömert/Masilla (rho=857;rho=0,853;rho=0,998). Los datos presentaron alta consistencia interna (Alfa Cronbach=0,897) y baja validación de contenido (36,2%). Conclusiones: Las mediciones de los 7 sistemas presentan alta fiabilidad. La erosión ósea, esclerosis y osteofitos son medidos en cuatro niveles de severidad y con similar escala en tres sistemas de diagnóstico (Alexiou, Arayasantiparb y Cömert), sugiriendose complementar con determinación del espacio articular y movilidad condilar, como propone RDC/TMD para TTM. La validación de contenido fue baja, solo los sistemas diagnósticos de Cömert y Alexiou superaron el 50%.

Objective: To compare and validate diagnostic systems for the severity of Osteoarthrosis (OA) of the temporomandibular joints (TMJ) in computed tomography (CT) images. Method: An observational, retrospective, analytical, blinded, retrospective study was performed. Ninety-nine patients (198MSCT-ATM) were evaluated, applying the criteria of seven different diagnostic systems. A calibrated clinician (K=0.7) performed the evaluations. Content validity was performed under the Ahmad criteria. Internal consistency was determined with Cronbach's Alpha. Data were correlated with Spearman's Rho. Results: For condylar erosion severity, there was a high positive correlation between Alexiou/Arayasantiparb (rho=0.986) and a low one between Cömert/Alexiou (rho=0.421) and Cömert/Arayasantiparb (rho=0.422) classifications. For condylar sclerosis, we found a strong correlation between Cömert/Alexiou, Masilla/Alexiou and Cömert/Masilla classifications (rho=857; rho=0.853; rho=0.998). The data presented high internal consistency (Cronbach's alpha=0.897) and low content validation (36.2%). Conclusions: The measurements of the 7 systems have a high reliability. Bone erosion, sclerosis and osteophytes are measured at four levels of severity and with a similar scale in three diagnostic systems (Alexiou, Arayasantiparb and Cömert). We suggest to complement it with the determination of joint space and condylar mobility, as proposed by RDC/TMD. Content validity was low, only the Cömert and Alexiou diagnostic systems were higher than 50%.

Biomarcadores inflamatorios en líquido sinovial de trastornos intraarticulares de la articulación temporomandibular. Revisión sistemática / Inflammatory biomarkers in synovial fluid of intra-articular disorders of the temporomandibular joint. Systematic review

RESUMEN Objetivo: Determinar los biomarcadores inflamatorios del líquido sinovial (LS) de pacientes adultos con trastornos intraarticulares (TI) de la articulación temporomandibular (ATM) y su capacidad diagnóstica. Métodos: Se realizó búsqueda electrónica/manual de artículos (2010-2019) en paralelo por dos investigadores. La calidad de los estudios, se determinó por medio de CONSORT y STROBE y el sesgo según criterios Cochrane RoB 2 en ensayos clínicos aleatorizados y Escala Newcastle-Ottawa en estudios observacionales. Se estudiaron pacientes con TI de la ATM y determinación de biomarcadores del LS. Resultados: De 264 artículos encontrados, 6 cumplieron los criterios inclusión-exclusión, incluyendo 262 pacientes, [OA=153, 93 con desplazamientos discales (DD) y 16 con OA+DD]. Todas las muestras fueron obtenidas por artrocentesis y detectadas por ELISA. Se determinaron 19 biomarcadores en pacientes con OA; 9 en DD y 2 en diagnosticados con OA+DD. El incremento de biomarcadores en el LS de la ATM se asocia con TI. Conclusión: Los biomarcadores detectados con mayor frecuencia en LS de pacientes con TI de ATM fueron IL-1β, IL-6 y TNF-α y en segunda frecuencia TGF-β1, MMP-3 e IFN-γ. Dada la inconsistencia de los protocolos utilizados la evidencia fue débil, imposibilitando asociar biomarcadores con diagnóstico de TI determinado, ni efectuar análisis estadístico.

ABSTRACT: Objective: To determine the evidence of inflammatory biomarkers present in the synovial fluid (SF) of adult patients with intra-articular disorders (ID) of the temporomandibular joint (TMJ) and their diagnostic ability. Methods: Electronic/manual search of articles (2010-2019) was performed. Data were extracted in duplicate. The quality of the studies was determined by CONSORT, STROBE and risk of bias was determined by Cochrane RoB 2 and Newcastle-Ottawa Scale. The populations studied were patients with TMJ ID and with studies of SF biomarkers. Results: Out of 264 articles found, 6 met the inclusion-exclusion criteria, including 262 patients, 93 with disc displacements (DD) and 16 with OA+DD. All samples were obtained by arthrocentesis and detected by ELISA. Nineteen biomarkers were evaluated in patients with OA, 9 in patients with DD and 2 in those diagnosed with OA+DD. Increased inflammatory biomarkers in the SF of TMJ are associated with ID. Conclusion: The most frequent biomarkers detected in SF of patients with TMJ ID were IL-1β, IL-6 and TNF-α and in second frequency TGF-β1, MMP-3 and IFN-γ. Given the inconsistency of the protocols used, the evidence was weak, making it impossible to associate biomarkers with a given IT diagnosis, or to perform statistical analysis.

The Optimize Heart Failure Care Program: Initial lessons from global implementation.

Hospitalization for heart failure (HF) places a major burden on healthcare services worldwide, and is a strong predictor of increased mortality especially in the first three months after discharge. Though undesirable, hospitalization is an opportunity to optimize HF therapy and advise clinicians and patients about the importance of continued adherence to HF medication and regular monitoring. The Optimize Heart Failure Care Program (www.optimize-hf.com), which has been implemented in 45 countries, is designed to improve outcomes following HF hospitalization through inexpensive initiatives to improve prescription of appropriate drug therapies, patient education and engagement, and post-discharge planning. It includes best practice clinical protocols for local adaptation, pre- and post-discharge checklists, and 'My HF Passport', a printed and smart phone application to improve patient understanding of HF and encourage involvement in care and treatment adherence. Early experience of the Program suggests that factors leading to successful implementation include support from HF specialists or 'local leaders', regular educational meetings for participating healthcare professionals, multidisciplinary collaboration, and full integration of pre- and post-hospital discharge checklists across care services. The Program is helping to raise awareness of HF and generate useful data on current practice. It is showing how good evidence-based care can be achieved through the use of simple clinician and patient-focused tools. Preliminary results suggest that optimization of HF pharmacological therapy is achievable through the Program, with little new investment. Further data collection will lead to a greater understanding of the impact of the Program on HF care and key indicators of success.

Alternative treatments for resin-based composite and amalgam restorations with marginal defects: a 12-month clinical trial.

This clinical trial sought to evaluate the effectiveness of alternative treatment for replacing amalgam and resin-based composite restorations with marginal defects. The study recruited 66 patients with 271 restorations. Each restoration was assigned randomly to one of five groups: Sealant, Refurbishing, Repair, Replacement, and Untreated. Two clinicians evaluated the restorations according to USPHS/Ryge criteria at baseline (Kappa 0.74) and one year after the treatment (Kappa 0.81). The scoring of the margins improved (from bravo to alfa) after the experimental treatments. None of the treatments showed significant degradation of the margins during the 12-month observation period.

Cambios Clínicos e Imagenológicos en Terapias no Invasivas en Articulaciones Temporomandibulares con Alteraciones Óseas Degenerativas

RESUMEN: El objetivo del presente estudio fue describir los cambios clínicos e imagenológicos de las terapias no invasivas aplicadas a pacientes con alteraciones óseas degenerativas de las articulaciones temporomandibulares (ATM). Metodología: Se evaluaron 25 pacientes con alteraciones óseas degenerativas de las ATM, sin tratamiento previo de trastornos temporomandibulares (TTM) al momento del diagnóstico. Se realizó tratamiento no invasivo y un año después fueron evaluados según criterios clínicos e imagenológicos DC/TMD y Ahmad. Los resultados fueron presentados por medio de estadística descriptiva, odds ratio con sus respectivos intervalos de confianza, comparaciones de medianas y correlaciones. Se estudiaron 50 ATM, 72 % mujeres (32,2 años promedio). Se observó mejora significativa en los parámetros: dolor (p=0,0001), sinovitis (p=0,001) e incremento de la esclerosis del trabeculado óseo (p=0,051) a un año post-tratamiento. Después de un año del establecimiento de terapias no invasivas en pacientes con alteraciones óseas degenerativas de las ATM, se observaron cambios positivos tanto clínicos como imagenológicos, reduciéndose significativamente la sintomatología dolorosa, limitándose la progresión del daño óseo degenerativo, y observándose recuperación de los casos de sinovitis.

ABSTRACT: The objective of this study was to describe clinical and imaging changes of non-invasive therapies applied to patients with degenerative bone disorders of the temporomandibular joints (TMJ). To carry out this study, 25 patients with degenerative bone disorders of TMJ without previous treatment at the time of diagnosis, were evaluated. Non-invasive treatment was performed and one year later they were evaluated according to clinical and imaging criteria DC/TMD and Ahmad. Results were presented by descriptive statistics, odds ratio, confidence interval, comparisons of means, and correlations. 50 TMJs, 72 % women, (32.2 years mean of age) were studied. Significant improvement was observed in the parameters: pain (p=0.0001), synovitis (p=0.001), and increased sclerosis of the bone trabeculae (p=0,051) at one-year post-treatment. After one year of the establishment of non-invasive therapies in patients with degenerative joint disease of TMJ, it was observed positive changes, both clinical and imaging, reducing painful symptomatology, limiting effect on the progression of degenerative bone damage, and recovery of synovitis cases.

Efectos de Omega-3 en el Sueño: Revisión Sistemática / Effects of Omega 3 on Sleep: Systematic Review

RESUMEN: Objetivo: Determinar el efecto de omega-3 sobre la calidad/cantidad de sueño en humanos. Métodos: Se realizó la búsqueda sistemática de artículos (2010-2019), incluyendo pacientes sin limitación de edad/sexo, sometidos a cambio o suplemento de dieta con omega-3 y evaluaciones de sueño. La revisión se realizó bajo los criterios PICOT y PRISMA, la calidad de la evidencia y riego de sesgo fueron evaluados con criterios GRADE. Resultados: Seis ensayos superaron todos los filtros, dos estudios incluyeron pescado en la dieta y cuatro ingesta de cápsulas de omega-3. En cuatro estudios Omega-3 favorece el sueño presentando impacto moderadamente positivo en calidad y alto en cantidad. Los estudios fueron efectuados con variables de alta heterogeneidad, imposibilitando el análisis cuantitativo de los datos. El riesgo de sesgo fue moderado-alto. Conclusión: Omega-3, como suplemento dietético o directamente en los alimentos, interviene como coadyuvante para mejorar el sueño. No se pudo concluir sobre su recomendación de uso clínico en la gestión del sueño debido a la heterogeneidad de las metodologías para medir la intervención, las poblaciones estudiadas y cantidad de ingesta. Se necesitan estudios con mayor estandarización metodológica, para determinar dosis óptima, período de intervención y proporción de ácidos eicosapentaenoico/docosahexaenoico, necesarios para mejorar la calidad y la cantidad del sueño.

ABSTRACT: Objective: To determine the effect of omega-3 on the quality/quantity of sleep in humans. Methods: We conducted a systematic search for articles (2010-2019), including patients without age or sex limitation, undergoing omega-3 diet change or supplementation and sleep assessments. The review was conducted under the PICOT and PRISMA criteria, the quality of evidence and risk of bias were evaluated with GRADE criteria. Results: Six trials passed all filters. Two studies included dietary fish and four omega-3 capsule intake. In four studies, omega-3 favored sleep with moderately positive impact on quality and high impact on quantity. The studies were conducted with highly heterogeneous variables, making a quantitative analysis of the data impossible. The risk of bias was moderate to high. Conclusion: Omega-3 as a dietary supplement or directly in food intervenes as an adjuvant to improve sleep. We could not conclude on its recommendation for clinical use in sleep management due to the heterogeneity of the methodologies to measure the intervention, the populations studied and amount of intake. Studies with greater methodological standardization are needed, to determine optimal dose, intervention period and eicosapentaenoic/docosahexaenoic acid ratio, needed to improve sleep quality and quantity.

Experiencia en la implementación de sistemas de gestión de calidad para la atención odontológica en un centro docente asistencial universitario / Experience in the implementation of quality management systems for dental care in a university teaching center

RESUMEN: Objetivo: Describir el desarrollo e implementación para el establecimiento, cumplimiento y acreditación como centro de atención abierta, para la atención odontológica de un centro docente asistencial. Metodología: Para alcanzar mayores niveles de calidad sanitaria y lograr satisfacción de pacientes, profesionales, estudiantes, personal auxiliar y administrativo, definimos 8 niveles de acción: orientar trabajo a resultados; realizar actividades centradas en el paciente; desarrollar el liderazgo y coherencia en los objetivos; gestionar por medio de procesos; involucrar a toda la comunidad; incorporar a la gestión el aprendizaje, la innovación y la mejora constante; potenciar alianzas internas y externas y garantizar la responsabilidad social. Resultados: El comité de calidad rediseñó protocolos, realizó mejoras computacionales y administrativas, realizó diálogos con la comunidad, incrementando de 80% a 100% el cumplimiento de los estándares obligatorios (n= 11) y de 70 % a 96 % los globales. Conclusiones: Alcanzar las competencias de planificación, gestión sanitaria y elevar los niveles de calidad en la atención de pacientes de un centro de salud que incluye una Facultad de Odontología, es un desafío continuo en el tiempo que involucra toda la comunidad, requiere especialistas del área, incrementa los costos de operación y conduce a su acreditación como centro de atención abierta.

ABSTRACT: Objective: To describe the development and implementation for the establishment, fulfillment and accreditation as an open-care center, for dental care in a University Teaching Center. Methodology: In order to reach higher levels of health care quality and additionally achieve the satisfaction of patients, professionals, students, auxiliary and administrative staff, the quality committee developed 8 levels of action: 1, orienting the work to results; 2, performing patient-centered activities; 3, developing leadership and coherence in the objectives; 4, managing through processes; 5, involving the entire community; 6, incorporating learning, innovation and constant improvement into management; 7, strengthening internal and external alliances and 8, ensuring social responsibility. Results: After 4 years of work by the quality and review committees, with the redesign of protocols, computer and administrative improvements, evaluation of progress and dialogue with the community, compliance with mandatory quality standards (n=11) was increased from 80% to 100% and compliance with the global standard was increased from 70% to 96% (mandatory + non-mandatory standards). Conclusions: The strategy to achieve planning and management competences in the health system and to raise quality levels of patient care in a health center that includes a dental school is a continuous challenge over time that involves the entire community, requires specialists in the area, increases operating costs and leads to accreditation as an Open.Care Center.

Personality Style in Patients Looking for Tooth Bleaching and Its Correlation with Treatment Satisfaction.

In the last years the focus in dentistry has shifted to an "esthetic dentistry" approach, where patients are concerned about reaching a better look of their teeth. Vital tooth bleaching is a technique with immediate results, which improves the appearance and patient's self-esteem. The aim of this study was to recognize personality characteristics determined by the Millon Index of Personality Styles of participants looking for tooth bleaching and to correlate them to satisfaction with the treatment. Forty participants were included and filled out the Millon Index of Personality Styles form before treatment. Expectation about tooth bleaching was quantified from 1 to 5. Patients were treated with bleaching agent according to manufacturer's directions. One week after treatment, the patient's satisfaction was quantified from 1 to 5. Prevailing personality characteristics were determined. Expectations and satisfaction values of all patients were correlated with each of the presented personality scales by Spearman Rho test. Ten scales prevailed over their counterpart. Median of patient's expectation was 2 and satisfaction 4. Only the score of a single characteristic (extraversing) showed statistically significant correlation with patient satisfaction. Patients looking for tooth bleaching treatment seem to have common personality characteristics. Almost all of them wanted to achieve a moderate change in teeth color and the result of the treatment was usually satisfactory.