RESUMO
Two experiments were conducted to determine the effects of feeder design on hay intake, apparent diet digestibility, and hay waste in gestating beef cows. Native tallgrass prairie hay and a protein supplement was fed throughout both experiments. In Exp. 1, 56 crossbred cows were used in a Latin square arrangement. Feeder design treatments included a conventional open bottom steel ring (OBSR), an open bottom polyethylene pipe ring (POLY); a sheeted bottom steel ring (RING), and a sheeted bottom steel ring with a basket (BASK). Cows were weighed and allotted based on BW to one of four previously grazed 2.0 ha paddocks equipped with a concrete feeding pad. Fourteen cows were assigned to each paddock and three round bales were fed consecutively within each treatment period. The cows acclimated to the feeders while the first bale was being consumed. Subsequently, hay waste data were collected while the second and third bale within each period were being consumed. Waste was measured for each bale at 24, 48, 72, and 96 h after each bale was introduced into the pen. Hay waste was significantly affected by hay feeder design with 19.7, 21.1, 12.4, and 5.5% of original bale weight wasted for OBSR, POLY, RING, and BASK, respectively (P < 0.01). There was a feeder design × day interaction (P < 0.01) with greater waste when the bale was first introduced into the pen in OBSR, POLY, and RING feeders and gradually declining thereafter, while waste from the BASK feeder was consistently low. There was a tendency (P = 0.06) for cows eating from OBSR feeders to consume less hay than cows eating from RING feeders. Feeder design did not influence apparent diet digestibility (P = 0.46). In Exp. 2, 64 crossbred cows (body weight = 590 ± 59 kg) were used to determine waste, forage intake, and apparent diet digestibility when hay was fed from a sheeted bottom steel ring (RING) or a RING feeder with a cone insert (CONE). More hay was wasted when cows were fed from RING feeders compared to CONE feeders (11.9% vs. 4.8%, P < 0.01). Feeder design had no effect on DMI or apparent digestibility (P > 0.45). Hay savings from adopting a more conservative feeder design can have a dramatic influence on hay utilization by beef cows and thus on cost of production.