RESUMO
Effective and accurate in vivo diagnosis of retinal pathologies requires high performance imaging devices, combining a large field of view and the ability to discriminate the ballistic signal from the diffuse background in order to provide a highly contrasted image of the retinal structures. Here, we have implemented the partial-field illumination ophthalmoscope, a patterned illumination modality, integrated to a high pixel rate adaptive optics full-field microscope. This non-invasive technique enables us to mitigate the low signal-to-noise ratio, intrinsic of full-field ophthalmoscopes, by partially illuminating the retina with complementary patterns to reconstruct a wide-field image. This new, to the best of our knowledge, modality provides an image contrast spanning from the full-field to the confocal contrast, depending on the pattern size. As a result, it offers various trade-offs in terms of contrast and acquisition speed, guiding the users towards the most efficient system for a particular clinical application.
Assuntos
Sensibilidades de Contraste/fisiologia , Iluminação , Oftalmoscópios , Fotografação/instrumentação , Retina/diagnóstico por imagem , Desenho de Equipamento , Humanos , Óptica e Fotônica , Razão Sinal-RuídoRESUMO
Structured Illumination Microscopy (SIM) is an imaging technique for achieving both super-resolution (SR) and optical sectioning (OS) in wide-field microscopy. It consists in illuminating the sample with periodic patterns at different orientations and positions. The resulting images are then processed to reconstruct the observed object with SR and/or OS. In this work, we present BOSSA-SIM, a general-purpose SIM reconstruction method, applicable to moving objects such as encountered in in vivo retinal imaging, that enables SR and OS jointly in a fully unsupervised Bayesian framework. By modeling a 2-layer object composed of an in-focus layer and a defocused layer, we show that BOSSA-SIM is able to jointly reconstruct them so as to get a super-resolved and optically sectioned in-focus layer. The achieved performance, assessed quantitatively by simulations for several noise levels, compares favorably with a state-of-the-art method. Finally, we validate our method on open-access experimental microscopy data.
RESUMO
The design and performance of an adaptive optics flood illumination ophthalmoscope (AO-FIO) platform, based on eye motion and dynamic aberrations experimental analysis, are described. The system incorporates a custom-built real-time controller, enabling up to 70 Hz loop rate without jitter, and an AO-corrected illumination capable of projecting high-resolution features in the retina. Wide-field (2.7°×5.4°) and distortionless images from vessel walls, capillaries, and the lamina cribrosa are obtained with an enhanced contrast and signal-to-noise ratio, thanks to careful control of AO parameters. The high spatial and temporal resolution (image acquisition up to 200 Hz) performance achieved by this platform enables the visualization of vessel deformation and blood flow. This system opens up the prospect of a return to favor of flood illumination adaptive optics systems provided that its high pixel rate and structured illumination capabilities are exploited.
Assuntos
Desenho de Equipamento , Luz , Oftalmoscópios , Óptica e Fotônica , Fluxo Sanguíneo Regional/fisiologia , Vasos Retinianos/anatomia & histologia , Feminino , Humanos , Masculino , Vasos Retinianos/fisiologiaRESUMO
The control of the optical quality of a laser beam requires a complex amplitude measurement able to deal with strong modulus variations and potentially highly perturbed wavefronts. The method proposed here consists in an extension of phase diversity to complex amplitude measurements that is effective for highly perturbed beams. Named camelot for Complex Amplitude MEasurement by a Likelihood Optimization Tool, it relies on the acquisition and processing of few images of the beam section taken along the optical path. The complex amplitude of the beam is retrieved from the images by the minimization of a Maximum a Posteriori error metric between the images and a model of the beam propagation. The analytical formalism of the method and its experimental validation are presented. The modulus of the beam is compared to a measurement of the beam profile, the phase of the beam is compared to a conventional phase diversity estimate. The precision of the experimental measurements is investigated by numerical simulations.
RESUMO
COupled SLope and scIntillation Detection And Ranging (CO-SLIDAR) is a recent profiling method of the vertical distribution of atmospheric turbulence strength (C(2)(n) profile). It takes advantage of correlations of slopes and of scintillation, both measured with a Shack-Hartmann wavefront sensor on a binary star. In this paper, we present the improved CO-SLIDAR reconstruction method of the C(2)(n) profile and the first on-sky results of the CO-SLIDAR profiler. We examine CO-SLIDAR latest performance in simulation, taking into account the detection noise bias and estimating error bars along with the turbulence profile. The estimated C(2)(n) profiles demonstrate the accuracy of the CO-SLIDAR method, showing sensitivity to both low and high altitude turbulent layers. CO-SLIDAR is tested on-sky for the first time, on the 1.5 m MeO (Métrologie Optique) telescope at Observatoire de la Côte d'Azur (France). The reconstructed profiles are compared to turbulence profiles estimated from meteorological data and a good agreement is found. We discuss CO-SLIDAR's contribution in the C(2)(n) profilers' landscape and we propose some improvements of the instrument.
RESUMO
In this Letter, we propose a method to perform 3D imaging with a simple and robust imaging system only composed of a continuously self-imaging grating (CSIG) and a matrix detector. With a CSIG, the intensity pattern generated by an object source is periodic and propagation invariant, apart from a dilatation factor that depends on the distance of the object. We demonstrate, theoretically and experimentally, how to exploit this property to analyze a scene in three dimensions. Such an imaging system can be used, for example, for tomographic applications.
RESUMO
Second harmonic generation (SHG) imaging microscopy of thick biological tissues is affected by the presence of aberrations and scattering within the sample. Moreover, additional problems, such as uncontrolled movements, appear when imaging in-vivo. Deconvolution methods can be used to overcome these limitations under some conditions. In particular, we present here a technique based on a marginal blind deconvolution approach for improving SHG images obtained in vivo in the human eye (cornea and sclera). Different image quality metrics are used to quantify the attained improvement. Collagen fibers in both cornea and sclera are better visualized and their spatial distributions accurately assessed. This might be a useful tool to better discriminate between healthy and pathological tissues, especially those where changes in collagen distribution occur.
RESUMO
A design of a miniaturized stationary Fourier transform IR spectrometer has been developed that produces a two-dimensional interferogram. The latter is disturbed by effects like parasitic interferences or disparities in the cutoff wavelength of the pixels. Thus, a simple Fourier transform cannot be used to estimate the spectrum of the scene. However, as these defects are deterministic, they can be measured and taken into account by inversion methods. A regularization term can also be added. The first experimental results prove the efficiency of this processing methodology.
RESUMO
We propose the linearized focal-plane technique (LIFT) and compare it to classical sensors, such as the quad-cell wavefront sensor (WFS), pyramid WFS, and Shack-Hartmann WFS. The number of modes sensed by LIFT can be tuned without any hardware modification nor degradation of low-order sensing performance. We derive an analytic model of the noise propagation law, which we validate on end-to-end simulations.
RESUMO
High-resolution optical systems require a very accurate control of the optical paths. For the measurement of aberrations on extended objects, several iterative phase-diversity algorithms have been developed, based on aberration estimation from focal-plane intensity measurements. Here we present an analytical estimator in the case of small aberrations. Under this assumption, a quadratic criterion is derived that allows us to express the solution (phase and object) under a simple analytical form. We also compare the performance of our algorithm with the iterative phase diversity, demonstrating that the analytic estimator is appropriate for closed-loop operation.
RESUMO
Image-based angiography is a well-adapted technique to characterize vasculature, and has been used in retinal neurovascular studies. Because the microvasculature is of particular interest, being the site of exchange between blood and tissue, a high spatio-temporal resolution is required, implying the use of adaptive optics ophthalmoscopes with a high frame rate. Creating the opportunity for decoupled stimulation and imaging of the retina makes the use of near infrared (NIR) imaging light desirable, while the need for a large field of view and a lack of distortion implies the use of a flood illumination-based setup. However, flood-illumination NIR video sequences of erythrocytes, or red blood cells (RBC), have a limited contrast compared to scanning systems and visible light. As a result, they cannot be processed via existing image-based angiography methods. We have therefore developed a new computational method relying on a spatio-temporal filtering of the sequence to isolate blood flow from noise in low-contrast sequences. Applying this computational approach enabled us to perform angiography with an adaptive optics flood illumination ophthalmoscope (AO-FIO) using NIR light, both in bright-field and dark-field modalities. Finally, we demonstrate the capabilities of our system to differentiate blood flow velocity on a retinal capillary network in vivo.
RESUMO
The images recorded by optical telescopes are often degraded by aberrations that induce phase variations in the pupil plane. Several wavefront sensing techniques have been proposed to estimate aberrated phases. One of them is phase diversity, for which the joint least-square approach introduced by Gonsalves et al. is a reference method to estimate phase coefficients from the recorded images. In this paper, we rely on the asymptotic theory of Toeplitz matrices to show that Gonsalves' technique provides a consistent phase estimator as the size of the images grows. No comparable result is yielded by the classical joint maximum likelihood interpretation (e.g., as found in the work by Paxman et al.). Finally, our theoretical analysis is illustrated through simulated problems.
Assuntos
Aumento da Imagem/métodos , Interpretação de Imagem Assistida por Computador/métodos , Armazenamento e Recuperação da Informação/métodos , Modelos Estatísticos , Refratometria/métodos , Simulação por Computador , Interpretação Estatística de Dados , Análise dos Mínimos QuadradosRESUMO
The direct imaging of planets around nearby stars is exceedingly difficult. Only about 14 exoplanets have been imaged to date that have masses less than 13 times that of Jupiter. The next generation of planet-finding coronagraphs, including VLT-SPHERE, the Gemini Planet Imager, Palomar P1640, and Subaru HiCIAO have predicted contrast performance of roughly a thousand times less than would be needed to detect Earth-like planets. In this paper we review the state of the art in exoplanet imaging, most notably the method of Locally Optimized Combination of Images (LOCI), and we investigate the potential of improving the detectability of faint exoplanets through the use of advanced statistical methods based on the concepts of the ideal observer and the Hotelling observer. We propose a formal comparison of techniques using a blind data challenge with an evaluation of performance using the Receiver Operating Characteristic (ROC) and Localization ROC (LROC) curves. We place particular emphasis on the understanding and modeling of realistic sources of measurement noise in ground-based AO-corrected coronagraphs. The work reported in this paper is the result of interactions between the co-authors during a week-long workshop on exoplanet imaging that was held in Squaw Valley, California, in March of 2012.
RESUMO
Current optical interferometers are affected by unknown turbulent phases on each telescope. In the field of radio interferometry, the self-calibration technique is a powerful tool to process interferometric data with missing phase information. This paper intends to revisit the application of self-calibration to optical long-baseline interferometry (OLBI). We cast rigorously the OLBI data processing problem into the self-calibration framework and demonstrate the efficiency of the method on a real astronomical OLBI data set.
RESUMO
We propose a novel method for the efficient direct detection of exoplanets from the ground using angular differential imaging. The method combines images appropriately, then uses the combined images jointly in a maximum-likelihood framework to estimate the position and intensity of potential planets orbiting the observed star. It takes into account the mixture of photon and detector noises and a positivity constraint on the planet's intensity. A reasonable detection criterion is also proposed based on the computation of the noise propagation from the images to the estimated intensity of the potential planet. The implementation of this method is tested on simulated data that take into account static aberrations before and after the coronagraph, residual turbulence after adaptive optics correction, and noise.
RESUMO
Cophasing a multiple-aperture optical telescope (MAOT) or optical interferometer requires the knowledge of the tips/tilts and of the differential pistons on its subapertures. In this paper we demonstrate in the case of a point source object that a single focal-plane image is sufficient for MAOT cophasing. Adopting a least-square approach allows us to derive an analytic estimator of the subaperture aberrations, provided that these are small enough (typically for closed-loop operation) and that the pupil is diluted noncentrosymmetric. We then provide the validation of this estimator by simulations as well as a performance comparison with a more conventional iterative algorithm of phase retrieval. Finally, we present the experimental validation of both estimators on a laboratory test bench; our results, especially subnanometric repeatability, demonstrate that focal-plane sensors are appropriate for the cophasing of phased array telescopes.
RESUMO
3D deconvolution is an established technique in microscopy that may be useful for low-cost high-resolution imaging of the retina. We report on a myopic 3D deconvolution method developed in a Bayesian framework. This method uses a 3D imaging model, a noise model that accounts for both photon and detector noises, a regularization term that is appropriate for objects that are a mix of sharp edges and smooth areas, a positivity constraint, and a smart parameterization of the point-spread function (PSF) by the pupil phase. It estimates the object and the PSF jointly. The PSF parameterization through the pupil phase constrains the inversion by dramatically reducing the number of unknowns. The joint deconvolution is further constrained by an additional longitudinal support constraint derived from a 3D interpretation of the phase-diversity technique. This method is validated by simulated retinal images.
Assuntos
Algoritmos , Interpretação de Imagem Assistida por Computador/métodos , Imageamento Tridimensional/métodos , Miopia/diagnóstico , Refratometria/métodos , Retinoscopia/métodos , Humanos , Aumento da Imagem/métodos , Imagens de Fantasmas , Reprodutibilidade dos Testes , Sensibilidade e EspecificidadeRESUMO
Current optical interferometers are affected by unknown turbulent phases on each telescope. We account for this lack of phase information by introducing system aberration parameters, and we solve the image reconstruction problem by minimizing an original joint criterion in the aberrations and in the object. We validate this method by means of simulations. Tests on experimental data are under way.
RESUMO
Aperture synthesis allows one to measure visibilities at very high resolutions by coupling telescopes of reasonable diameters. We consider the case where visibility amplitudes and phase are measured separately. It leads to an estimation problem where the noise model yields a nonconvex data-likelihood criterion. We show how to optimally approximate the noise model while keeping the criterion convex. This approximation has been validated both on simulations and on experimental data.
Assuntos
Algoritmos , Interpretação de Imagem Assistida por Computador/métodos , Interferometria/métodos , Modelos Estatísticos , Simulação por Computador , Aumento da Imagem/métodosRESUMO
Deconvolution is a necessary tool for the exploitation of a number of imaging instruments. We describe a deconvolution method developed in a Bayesian framework in the context of imaging through turbulence with adaptive optics. This method uses a noise model that accounts for both photonic and detector noises. It additionally contains a regularization term that is appropriate for objects that are a mix of sharp edges and smooth areas. Finally, it reckons with an imperfect knowledge of the point-spread function (PSF) by estimating the PSF jointly with the object under soft constraints rather than blindly (i.e., without constraints). These constraints are designed to embody our knowledge of the PSF. The implementation of this method is called MISTRAL. It is validated by simulations, and its effectiveness is illustrated by deconvolution results on experimental data taken on various adaptive optics systems and telescopes. Some of these deconvolutions have already been used to derive published astrophysical interpretations.