Synergistic effects between arbuscular mycorrhizal fungi and rhizobium isolated from As-contaminated soils on the As-phytoremediation capacity of the tropical woody legume Anadenanthera peregrina.

The synergistic relationship between arbuscular mycorrhizal fungi and plant species may play a key role in phytoremediation of arsenic(As)-contaminated soils. By using modified Leonard jars, we investigated both the distinct and integrative roles of arbuscular mycorrhizal fungi (AMF-Acaulospora scrobiculata) and rhizobia (BH-ICB-A8) isolated from As-contaminated soil on the capacity of Anadenanthera peregrina to reclaim arsenate [As(V)] from soil. AMF inoculation greatly increased plant phosphorous nutrition, as reflected in greater growth, and increased As-concentrations in the roots and shoots. While rhizobia inoculation alone increased nitrogen nutrition it did not promote plant growth or As-uptake. Rhizobia and AMF inoculation together had synergistic effects, however, increasing both the growth and the As-phytoremediation capacity of A. peregrina. Joint inoculation with rhizobia and AMF should therefore be considered a potential technique for rehabilitating As-contaminated areas using A. peregrina.

Development and Evaluation of a 66-Well Plate Using a Porous Sorbent in a Four-Phase Extraction Assisted by Electric Field Approach.

In this work, cellulose cone tips were used as a hydrophilic sorbent supporting an aqueous electrolyte solution in a four-phase electric-field-assisted extraction. The wetted tips were immersed in an immiscible organic phase, acting as a filter to extract analytes present in an aqueous sample. Simultaneous four-phase extractions were carried out under the influence of an electric field using a 66-well plate constructed with inexpensive and readily available laboratory materials. Several parameters that control the electric resistivity of the system were evaluated, and the cone tips provided reproducible and stable electric current during application of electric potential difference. In a final application, a cationic dye and its metabolite, crystal and leuco crystal violet, were extracted from spiked fish extracts and quantified by a digital image analysis method. The method presented a linear range of 2-100 ng mL-1 ( r > 0.999), limit of detection of 1.37 ng mL-1, inter- (3 consecutive days) and intraday precision determined for 4 concentration levels ( n = 6, each) were lower than 29% and mean recoveries for these concentrations ranging from 95% to 115%. The results demonstrated that the 66-well plate provides a stable, reproducible, and simple way to conduct extractions of ionic compounds from complex aqueous matrixes. The effectiveness of the low-cost cellulose cone tips used as a solid fourth phase also confirmed that it can easily overcome many drawbacks of similar liquid-liquid-liquid approaches.

Desorption electrospray ionization mass spectrometry (DESI-MS) applied to the speciation of arsenic compounds from fern leaves.

The different chemical forms of arsenic compounds, including inorganic and organic species, present distinct environmental impacts and toxicities. Desorption electrospray ionization mass spectrometry (DESI-MS) is an excellent technique for in situ analysis, as it operates under atmospheric pressure and room temperature and is conducted with no/minimal sample pretreatment. Aimed at expanding its scope, DESI-MS is applied herein for the quick and reliable detection of inorganic (arsenate--As(V): AsO4(3-) and arsenite--As(III): AsO2(-)) and organic (dimethylarsinic acid--DMA: (CH3)2AsO(OH) and disodium methyl arsonate hexahydrate: CH3AsO3·2Na·6H2O) arsenic compounds in fern leaves. Operational conditions of DESI-MS were optimized with DMA standard deposited on paper surfaces to improve ionization efficiency and detection limits. Mass spectra data for all arsenic species were acquired in both the positive and negative ion modes. The positive ion mode was shown to be useful in detecting both the organic and inorganic arsenic compounds. The negative ion mode was shown only to be useful in detecting As(V) species. Moreover, MS/MS spectra were recorded to confirm the identity of each arsenic compound by the characteristic fragmentation profiles. Optimized conditions of DESI-MS were applied to the analysis of fern leaves. LC-ICP-MS was employed to confirm the results obtained by DESI-MS and to quantify the arsenic species in fern leaves. The results confirmed the applicability of DESI-MS in detecting arsenic compounds in complex matrices.

Authenticity study of commercial samples of St. John's wort by paper spray ionization mass spectrometry and chemometric tools.

Hypericum perforatum L. (St. John's wort) is one of the world's most consumed medicinal plants for treating depression and psychiatric disorders. Counterfeiting can occur in the medicinal plant trade, either due to the lack of active ingredients or the addition of substances not mentioned on the labels, often without therapeutic value or even harmful to health. Hence, 43 samples of St. John's wort commercially acquired in different Brazilian regions and other countries were analyzed by paper spray ionization mass spectrometry (PS-MS) and modeled by principal component analysis. Hence, samples (plants, capsules, and tablets) were extracted with ethanol in a solid-liquid extraction. For the first time, PS-MS analysis allowed the detection of counterfeit H. perforatum samples containing active principles typical of other plants, such as Ageratum conyzoides and Senna spectabilis. About 52.3% of the samples were considered adulterated for having at least one of these two species in their composition. Furthermore, out of 35 samples produced in Brazil, only 13 were deemed authentic, having only H. perforatum. Therefore, there is a clear need to improve these drugs' quality control in Brazil.

Screening method for the characterization of anabolic steroids seized in Brazil using paper spray mass spectrometry and chemometric tools.

This paper reports the use of paper spray mass spectrometry (PS-MS) combined with chemometric models to analyze seized samples of anabolic steroids. Because many forensic laboratories typically demand high-throughput analysis for this type of sample, we developed a quicker and simpler alternative analytical method for routine analysis with minimal sample preparation. Oily samples (n = 39) resulting from seizures carried out by Brazilian Federal and State Police units were selected for this study. These samples were analyzed by PS-MS in the positive ion mode and full scan (50-1000 m/z), providing spectra containing patterns of the respective active ingredients present in each product. A principal component analysis (PCA) model was built, which discriminated samples mainly according to their active ingredients and allowed to detect and characterize some cases of product counterfeiting. The variable selection method ordered predictors selection was employed jointly with PCA to improve sample cluster separation and to provide model simplification. The final PCA model was built with three principal components and using only 28 spectral variables. This model accounted for 69.82% of the variance and discriminated samples according to their specific active ingredients.

Investigation of the performance of cross-linked poly(acrylic acid) and poly(methacrylic acid) as efficient adsorbents in SPE columns for simultaneous preconcentration of tricyclic antidepressants in water samples.

A solid phase extraction-based (SPE) procedure for simultaneous preconcentration of five tricyclic antidepressants (TCAs), amitriptyline hydrochloride (AMT), nortriptyline hydrochloride (NOR), doxepin hydrochloride (DOX), imipramine hydrochloride (IMI), and clomipramine hydrochloride (CLO) from water samples with determination by HPLC-DAD is proposed. Polymers were characterized by FT-IR, SEM, and thermogravimetric analysis. SPE-based methods were carried out by the preconcentration of 320.0 mL of TCAs at pH 7.0 (buffered with 0.01 mol L-1 phosphate buffer) through 70.0 mg of adsorbent packed into a SPE cartridge, followed by elution with 1.0 mL of ACN : MeOH : acetic acid solution (45 : 45 : 10% v/v). Higher preconcentration factors were obtained ranging from 117.9 to 372.2 and 207.1 to 396.1 by using poly(MAA-co-EGDMA) and poly(AA-co-EGDMA), respectively, yielding lower limits of detection (0.03 to 0.12 µg L-1) and (0.03 to 0.15 µg L-1). These outcomes show satisfactory detectability of SPE-based methods, with slightly better performance using poly(MAA-co-EGDMA). On the other hand, poly(AA-co-EGDMA) was able to preconcentrate TCAs in the presence of humic acid (7.0 mg L-1) without interference. The precision of methods assessed as RSD (%) was very similar, ranging from 1.7% to 16.3% for poly(MAA-co-EGDMA) and 1.7% to 13.4% for poly(AA-co-EGDMA). SPE cartridges packed with the polymers showed high reusability (52 cycles of preconcentration and elution) without losing adsorption efficiency. The methods were applied to determine TCAs in tap, lake, and stream water samples and the accuracy was attested by addition and recovery tests (86.7-116.0%), with determined nortriptyline ranging from 0.48 to 0.52 µg L-1 in lake water samples.

Electric field-assisted multiphase extraction to increase selectivity and sensitivity in liquid chromatography-mass spectrometry and paper spray mass spectrometry.

In this work, for the first time, chromatographic paper was used for a multiphase extraction assisted by an electric field (MPEF) and directly coupled to paper spray mass spectrometry (PS-MS). Using this approach, five tricyclic antidepressants (TCAs) were determined in oral fluid. Firstly, the MPEF conditions were optimized using liquid chromatography-mass spectrometry (LC-MS/MS). The effects of the chromatographic paper and the types of electrolyte used in the acceptor phase, the organic solvent type and the amount used in the donor phase, the extraction time, and the applied electric potential were all investigated. After optimization, the analytes were extracted from the donor solution (sample and acetonitrile 1:1 (v/v)) over a period of 10 min at 300 V, crossing the free liquid membrane (1-octanol) and reaching the acceptor phase (chromatographic paper wetted with 400 mmol L-1 acetic acid). The method using LC-MS/MS was validated, demonstrating a linear range from 2 to 12 ng mL-1, with detection and quantification limits of 0.13-0.25 and 0.44-0.84 ng mL-1, respectively, an intraday precision of less than 20%, and no matrix effect observed. The optimized MPEF conditions were then applied to determine TCAs by PS-MS and for this analysis cyclobenzaprine was used as an internal standard. The easy, fast and direct approach of coupling MPEF with PS-MS analysis, as well as the pre-concentration and the low standard deviation of replicates (less than 20%), demonstrates that this method can be useful for screening in clinical and toxicological analysis.

Toxicity of Carnoy's solution toward human keratinocytes: an in vitro study.

The present study aimed to characterize the chemical elements and cytotoxicity of Carnoy's solution (CS) by comparing two different trademarked products (one Brazilian [NCS] and another imported [ICS]) using inductively coupled plasma mass spectrometry (ICP-MS) and human keratinocyte (HaCaT) cultures. For performing ICP-MS, the solutions were diluted according to calibration curves, and the chemical elements were analyzed with a spectrometer. HaCaT cells were exposed to CS concentrations ranging from 0.10% to 20% for 3 or 5 min. Cell viability was evaluated immediately (T0), 24 h (T1), and 7 days (T2) after exposure to CS using 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyl-tetrazolium bromide (MTT) reduction assay. Data were analyzed using a t-test for ICP-MS and analysis of variance followed by Tukey's post-hoc test for MTT assay, both considering statistical significance at p<0.05. ICP-MS results revealed that ICS presented significantly lower concentrations of 12 chemical elements than NCS. The results of MTT assay revealed that at T0, ICS was more cytotoxic than NCS regardless of the time of exposure (p < 0.05). At T1, the only difference between the groups was at a concentration of 0.10% after 5 min of exposure. At T2, at a concentration of 0.5%, ICS resulted in a significant reduction in cell viability compared to NCS (p < 0.05). Thus, the results showed that ICS was more cytotoxic than NCS. Collectively, our findings suggest that the individual compositions of different CS formulations should be investigated.

A data fusion model merging information from near infrared spectroscopy and X-ray fluorescence. Searching for atomic-molecular correlations to predict and characterize the composition of coffee blends.

This article aims to develop and validate a multivariate model for quantifying Robusta-Arabica coffee blends by combining near infrared spectroscopy (NIRS) and total reflection X-ray fluorescence (TXRF). For this aim, 80 coffee blends (0.0-33.0%) were formulated. NIR spectra were obtained in the wavenumber range 11100-4950 cm-1 and 14 elements were determined by TXRF. Partial least squares models were built using data fusion at low and medium levels. In addition, selection of predictive variables based on their importance indices (SVPII) improved results. The best model reduced the number of variables from 1114 to 75 and root mean square error of prediction from 4.1% to 1.7%. SVPII selected NIR regions correlated with coffee components, and the following elements were chosen: Ti, Mn, Fe, Cu, Zn, Br, Rb, Sr. The model interpretation took advantage of the data fusion between atomic and molecular spectra in order to characterize the differences between these coffee varieties.

Supramolecular microextraction combined with paper spray ionization mass spectrometry for sensitive determination of tricyclic antidepressants in urine.

This work describes a novel methodology to analyze four tricyclic antidepressants (amitriptyline, doxepin, imipramine and, nortriptyline) in urine samples by combining supramolecular microextraction and paper spray ionization mass spectrometry (PS-MS). The proposed method uses a supramolecular solvent in which reverse micelles of 1-decanol are dispersed in tetrahydrofuran (THF)/water. The extraction of the tricyclic antidepressants at pH 9.0 requires a sample volume of 10.0 mL, short extraction time (1.0 min of extraction and 5 min of centrifugation), low amounts of organic solvent (50 µL of 1-decanol and 200 µL of THF), and provides high preconcentration factors: 96.9 to amitriptyline, 93.6 to doxepin, 71.3 to imipramine, and 146.9 to nortriptyline. The quantification by PS-MS is fast and straightforward because chromatographic separation is not required and all analytes were determined simultaneously. The limits of detection (LOD), quantification (LOQ), and the precision (RSD, %) of the developed method ranged between 5.2 and 8.6 µg L-1, 17.4-28.7 µg L-1 and 1.3-12.9%, respectively. Urine samples of five individuals (three males and two females) were used for accuracy evaluation. The accuracy obtained in these spiked urine samples at µg L-1 levels varied from 95.3 to 112.0%. The method also provided clean mass spectra with a high signal-to-noise ratio, which demonstrates the analytical appeal combination of supramolecular microextraction with determination by paper spray mass spectrometry.

Toxicity of Carnoy's solution toward human keratinocytes: an in vitro study

Abstract: The present study aimed to characterize the chemical elements and cytotoxicity of Carnoy's solution (CS) by comparing two different trademarked products (one Brazilian [NCS] and another imported [ICS]) using inductively coupled plasma mass spectrometry (ICP-MS) and human keratinocyte (HaCaT) cultures. For performing ICP-MS, the solutions were diluted according to calibration curves, and the chemical elements were analyzed with a spectrometer. HaCaT cells were exposed to CS concentrations ranging from 0.10% to 20% for 3 or 5 min. Cell viability was evaluated immediately (T0), 24 h (T1), and 7 days (T2) after exposure to CS using 3-(4,5-dimethylthiazol-2-yl)-2, 5-diphenyl-tetrazolium bromide (MTT) reduction assay. Data were analyzed using a t-test for ICP-MS and analysis of variance followed by Tukey's post-hoc test for MTT assay, both considering statistical significance at p<0.05. ICP-MS results revealed that ICS presented significantly lower concentrations of 12 chemical elements than NCS. The results of MTT assay revealed that at T0, ICS was more cytotoxic than NCS regardless of the time of exposure (p < 0.05). At T1, the only difference between the groups was at a concentration of 0.10% after 5 min of exposure. At T2, at a concentration of 0.5%, ICS resulted in a significant reduction in cell viability compared to NCS (p < 0.05). Thus, the results showed that ICS was more cytotoxic than NCS. Collectively, our findings suggest that the individual compositions of different CS formulations should be investigated.

Fast determination of trace elements in organic fertilizers using a cup-horn reactor for ultrasound-assisted extraction and fast sequential flame atomic absorption spectrometry.

A fast and accurate method based on ultrasound-assisted extraction in a cup-horn sonoreactor was developed to determine the total content of Cd, Co, Cr, Cu, Mn, Ni, Pb and Zn in organic fertilizers by fast sequential flame atomic absorption spectrometry (FS FAAS). Multivariate optimization was used to establish the optimal conditions for the extraction procedure. An aliquot containing approximately 120 mg of the sample was added to a 500 µL volume of an acid mixture (HNO3/HCl/HF, 5:3:3, v/v/v). After a few minutes, 500 µL of deionized water was added and eight samples were simultaneously sonicated for 10 min at 50% amplitude, allowing a sample throughput of 32 extractions per hour. The performance of the method was evaluated with a certified reference material of sewage sludge (CRM 029). The precision, expressed as the relative standard deviation, ranged from 0.58% to 5.6%. The recoveries of analytes were found to 100%, 109%, 96%, 92%, 101%, 104% and 102% for Cd, Cr, Cu, Mn, Ni, Pb and Zn, respectively. The linearity, limit of detection and limit of quantification were calculated and the values obtained were adequate for the quality control of organic fertilizers. The method was applied to the analysis of several commercial organic fertilizers and organic wastes used as fertilizers, and the results were compared with those obtained using the microwave digestion procedure. A good agreement was found between the results obtained by microwave and ultrasound procedures with recoveries ranging from 80.4% to 117%. Two organic waste samples were not in accordance with the Brazilian legislation regarding the acceptable levels of contaminants.

Development of a simple method for the determination of lead in lipstick using alkaline solubilization and graphite furnace atomic absorption spectrometry.

A simple method was developed for determining the total lead content in lipstick samples by graphite furnace atomic absorption spectrometry (GFAAS) after treatment with tetramethylammonium hydroxide (TMAH). Multivariate optimization was used to establish the optimal conditions of sample preparation. The graphite furnace heating program was optimized through pyrolysis and atomization curves. An aliquot containing approximately 50mg of the sample was mixed with TMAH and heated in a water bath at 60°C for 60 min. Using Nb as the permanent modifier and Pd as the chemical modifier, the optimal temperatures were 900°C and 1800°C for pyrolysis and atomization, respectively. Under optimum conditions, the working range was from 1.73 to 50.0 µg L(-1), with detection and quantification limits of 0.20 and 0.34 µg g(-1), respectively. The precision was evaluated under conditions of repeatability and intermediate precision and showed standard deviations of 2.37%-4.61% and 4.93%-9.75%, respectively. The % recovery ranged from 96.2% to 109%, and no significant differences were found between the results obtained using the proposed method and the microwave decomposition method for real samples. Lead was detected in 21 tested lipstick samples; the lead content in these samples ranged from 0.27 to 4.54 µg g(-1).

Determination of cocaine in postmortem human liver exposed to overdose. Application of an innovative and efficient extraction/clean up procedure and gas chromatography-mass spectrometry analysis.

A simple and efficient method was developed for the determination of cocaine in post-mortem samples of human liver via solid-liquid extraction with low temperature partitioning (SLE-LTP) and analysis by gas chromatography coupled to mass spectrometry (GC-MS). The extraction procedure was optimized by evaluating the influence of the following variables: pH of the extract, volume and composition of the extractor solvent, addition of a sorbent material (PSA: primary-secondary amine) and NaCl to clean up and increase the ionic strength of the extract. A bovine liver sample that was free of cocaine was used as a blank for the optimization of the SLE-LTP extraction procedure. The highest recovery was obtained when crushed bovine liver (2g) was treated with 2mL of ultrapure water plus 8mL of acetonitrile at physiological pH (7.4). The results also indicated no need for using PSA and NaCl. The complete analytical procedure was validated for the following figures of merit: selectivity, lower limit of quantification (LLOQ), calibration curve, recovery, precision and accuracy (for within-run and between-run experiments), matrix effect, dilution integrity and stability. The within-run and between-run precision (at four levels) varied from 2.1% to 9.4% and from 4.0% to 17.0%, respectively. A maximum deviation of 11.62% for the within-run and between-run accuracies in relation to the nominal concentrations was observed. Moreover, the LLOQ value for cocaine was 50.0ngg(-1) whereas no significant effects were noticed in the assays of dilution integrity and stability. To assess its overall performance, the optimized method was applied to the analysis of eight human liver samples collected from individuals who died due to the abusive consumption of cocaine. Due to the existence of a significant matrix effect, a blank human liver was used to construct a matrix-matched analytical curve. The concentrations of cocaine found in these samples ranged from 333.5 to 5969ngg(-1).