Phthalylglycyl Chloride as a Derivatization Agent for UHPLC-MS/MS Determination of Adrenaline, Dopamine and Octopamine in Urine.

Dopamine, adrenaline and octopamine are small polar molecules that play a vital role in regulatory systems. In this paper, phthalylglycyl chloride was proposed as a derivatization agent for octopamine, adrenaline and dopamine determination in urine for the first time. The derivatization procedure facilitated the use of reversed-phase liquid chromatography with positive electrospray ionization-high-resolution mass spectrometry. An LC-HRMS method was developed that provided quantification limits of 5 ng/mL and detection limits of 1.5 ng/mL for all analytes. The 95-97% yield of derivates was observed after a 10 min derivatization with phthalylglycyl chloride at pH 6.5 and 30 °C. The proposed method was successfully applied to the analysis of human urine samples. The obtained results were compared with those of conventional derivatization procedures with 9-fluorenyl-methoxycarbonyl chloride and dansyl chloride.

Silica Immobilised Chloro- and Amido-Derivatives of Eremomycine as Chiral Stationary Phases for the Enantioseparation of Amino Acids by Reversed-Phase Liquid Chromatography.

Macrocyclic glycopeptide antibiotics immobilized on silica are one of the effective classes of stationary phases for chiral recognition and HPLC separation of a wide range of optically active compounds. Enantioselectivity primarily depends on the chemical structure of the chiral ligand, immobilization chemistry, and separation conditions. In the present work, three new chiral stationary phases (CSPs) based on macrocyclic antibiotic eremomycin were prepared and investigated for enantioseparation of amino acids. Two eremomycin derivatives, including simple non-substituted amide and bulky adamantyl amide, provided important information on the role of the carboxylic group in the eremomycin structure in the chiral recognition mechanism concerning amino acid optical isomers. One more CSP having a chlorine atom in the same position elucidates the role of the first aromatic ring in the eremomycin structure as a crucial point for chiral recognition. CSP with immobilized chloreremomycin was the most successful among the phases prepared in this work. It was additionally investigated under various separation conditions, including the type and content of the organic solvent in the eluent, the effects of different additives, and the concentration and pH of the buffer. Importantly, an efficient enantioselective separation of amino acids was achieved with pure water as the eluent.

Investigating the Effect of Column Geometry on Separation Efficiency using 3D Printed Liquid Chromatographic Columns Containing Polymer Monolithic Phases.

Effect of column geometry on the liquid chromatographic separations using 3D printed liquid chromatographic columns with in-column polymerized monoliths has been studied. Three different liquid chromatographic columns were designed and 3D printed in titanium as 2D serpentine, 3D spiral, and 3D serpentine columns, of equal length and i.d. Successful in-column thermal polymerization of mechanically stable poly(BuMA-co-EDMA) monoliths was achieved within each design without any significant structural differences between phases. Van Deemter plots indicated higher efficiencies for the 3D serpentine chromatographic columns with higher aspect ratio turns at higher linear velocities and smaller analysis times as compared to their counterpart columns with lower aspect ratio turns. Computational fluid dynamic simulations of a basic monolithic structure indicated 44%, 90%, 100%, and 118% higher flow through narrow channels in the curved monolithic configuration as compared to the straight monolithic configuration at linear velocities of 1, 2.5, 5, and 10 mm s-1, respectively. Isocratic RPLC separations with the 3D serpentine column resulted in an average 23% and 245% (8 solutes) increase in the number of theoretical plates as compared to the 3D spiral and 2D serpentine columns, respectively. Gradient RPLC separations with the 3D serpentine column resulted in an average 15% and 82% (8 solutes) increase in the peak capacity as compared to the 3D spiral and 2D serpentine columns, respectively. Use of the 3D serpentine column at a higher flow rate, as compared to the 3D spiral column, provided a 58% reduction in the analysis time and 74% increase in the peak capacity for the isocratic separations of the small molecules and the gradient separations of proteins, respectively.

Low-Cost Passive Sampling Device with Integrated Porous Membrane Produced Using Multimaterial 3D Printing.

Multimaterial 3D printing facilitates the rapid production of complex devices with integrated materials of varying properties and functionality. Herein, multimaterial fused deposition modeling (MM-FDM) 3D printing was applied to the fabrication of low-cost passive sampler devices with integrated porous membranes. Using MM-FDM 3D printing, the device body was produced using black polylactic acid, with Poro-Lay Lay-Felt filament used for the printing of the integrated porous membranes (rubber-elastomeric polymer, porous after removal of a water-soluble poly(vinyl alcohol) component). The resulting device consisted of two interlocking circular frames, each containing the integrated membrane, which could be efficiently sealed together without the need for additional O-rings, and prevented loss of enclosed microparticulate sorbent. Scanning electron microscopy (SEM) analysis of the purified composite filament confirmed the porous properties of the material, an average pore size of ∼30 nm. The printed passive samplers with various membrane thicknesses, including 0.5, 1.0, and 1.5 mm, were evaluated for their ability to facilitate the extraction of atrazine as the model solute onto the internal sorbent, under standard conditions. Gas chromatography-mass spectrometry was used to determine the uptake of atrazine by the device from standard water samples and also to evaluate any chemical leaching from the printed materials. The sampler with 0.5 mm thick membrane showed the best performance with 87% depletion and a sampling rate of 0.19 Ld-1 ( n = 3, % RSD = 0.59). The results obtained using these printed sampling devices with integrated membranes were in close agreement to devices fitted with a standard poly(ether sulfone) membrane.

Separation of superparamagnetic magnetite nanoparticles by capillary zone electrophoresis using non-complexing and complexing electrolyte anions and tetramethylammonium as dispersing additive.

Separations of bare superparamagnetic magnetite nanoparticles (BSPMNPs, approx. 11 nm diameter) was performed using non-complexing (nitrate) and complexing (chloride, citrate and phosphate) electrolyte ions with additions of tetramethylammonium hydroxide (TMAOH), which is commonly applied to control the synthesis of stable iron oxides. The use of TMAOH as a background electrolyte (BGE) additive for capillary electrophoresis (CE) separations provided for the first time electropherograms of BSPMNPs exhibiting symmetrical and highly reproducible peaks, free of spurious spikes characteristic of nanoparticle clusters. Consequently, accurate determination of the electrophoretic effective mobility of BSPMNPs was possible, yielding a value of -3.345E-08 m2 V-1 s-1 (relative standard deviation (RSD) of 0.500%). The obtained mobilities of BSPMNPs in the presence of various electrolyte ions show that the degree of complexation with the surface of BSPMNPs follows the order chloride < citrate < phosphate, correlating with the stabilities of Fe(III) complexes with the respective anions. Finally, bare and carboxylated iron oxide nanoparticles were successfully separated in only 10 min using 10 mM Tris-nitrate containing 20 mM of TMAOH as electrolyte. Our findings show that simple and rapid CE experiments are an excellent tool to characterise and monitor properties and interactions of iron oxide nanoparticles with other molecules for surface modification purposes.

Geometrical Alignment of Multiple Fabrication Steps for Rapid Prototyping of Microfluidic Paper-Based Analytical Devices.

Three main fabrication steps for microfluidic paper-based analytical devices (µPADs) were fully integrated with accurate geometrical alignment between the individual steps in a simple and rapid manner. A wax printer for creating hydrophobic barriers was integrated with an inexpensive (ca. $300) electronic craft plotter/cutter for paper cutting, followed by colorimetric reagent deposition using technical pens. The principal shortcoming in the lack of accurate and precise alignment of the features created by these three individual fabrication steps was addressed in this work by developing appropriate alignment procedures during the multistep fabrication process. The wax printing step was geometrically aligned with the following cutting and plotting (deposition) steps in a highly accurate and precise manner using optical scanning function of the plotter/cutter based on registration marks printed on the paper using the wax printer and scanned by the plotter/cutter. The accuracy and precision of alignment in a two-dimensional plane were quantified by cutting and plotting cross-shaped features and measuring their center coordinates relative to wax printed reference lines. The average accuracy along the X- and Y-axis was 0.12 and 0.16 mm for cutting and 0.19 and 0.17 mm for plotting, respectively. The potential of this approach was demonstrated by fabricating µPADs for instrument-free determination of cobalt in waters using distance-based readout, with excellent precision (%RSD = 5.7) and detection limit (LOD) of 2.5 ng and 0.5 mg/L (mass and concentration LODs, respectively).

Performance of a New 235 nm UV-LED-Based On-Capillary Photometric Detector.

In this work, for the first time, a sub-250 nm light-emitting diode (LED) is investigated as a light source for optical detection in chemical analysis. A 235 nm deep ultraviolet-light-emitting diode (UV-LED) is employed within an on-capillary photometric detector and applied in capillary ion-exchange chromatography (IEC) for the detection of common ultraviolet (UV)-absorbing anions (here, iodide, nitrate, and nitrite). This investigation focused on fundamental properties of UV-LEDs, in particular, emission spectra, radiometric power, effective heat dissipation with a passive heat sink, and energy conversion. The detection showed excellent linearity with stray light down to 0.6%, and an effective path length at 92% of the used capillary inner diameter. The analytical performance parameters were demonstrated by detection of chromatographic separation of iodide in simulated seawater, showing a limit of detection (LOD) of 1.30 µmol L-1, a linear range of 7.9-3937 µmol L-1, and reproducibility (with a relative standard deviation (RSD)) of 0.6% for peak height 0.7% for peak area. In addition, nitrite and nitrate were selected to study the potential of using deep UV-LEDs as the light source in photometric detection for even lower-wavelength-absorbing analytes (λmax = 209 nm for nitrite and 200 nm for nitrate), showing reproducibility (RSD = 1.2% and 3.6% for peak height and 0.9% and 2.9% for peak area, respectively) and LOD = 7 and 26 µmol L-1.

Porous, High Capacity Coatings for Solid Phase Microextraction by Sputtering.

We describe a new process for preparing porous solid phase microextraction (SPME) coatings by the sputtering of silicon onto silica fibers. The microstructure of these coatings is a function of the substrate geometry and mean free path of the silicon atoms, and the coating thickness is controlled by the sputtering time. Sputtered silicon structures on silica fibers were treated with piranha solution (a mixture of concd H2SO4 and 30% H2O2) to increase the concentration of silanol groups on their surfaces, and the nanostructures were silanized with octadecyldimethylmethoxysilane in the gas phase. The attachment of this hydrophobic ligand was confirmed by X-ray photoelectron spectroscopy and contact angle goniometry on model, planar silicon substrates. Sputtered silicon coatings adhered strongly to their surfaces, as they were able to pass the Scotch tape adhesion test. The extraction time and temperature for headspace extraction of mixtures of alkanes and alcohols on the sputtered fibers were optimized (5 min and 40 °C), and the extraction performances of SPME fibers with 1.0 or 2.0 µm of sputtered silicon were compared to those from a commercial 7 µm poly(dimethylsiloxane) (PDMS) fiber. For mixtures of alcohols, aldehydes, amines, and esters, the 2.0 µm sputtered silicon fiber yielded signals that were 3-9, 3-5, 2.5-4.5, and 1.5-2 times higher, respectively, than those of the commercial fiber. For the heavier alkanes (undecane-hexadecane), the 2.0 µm sputtered fiber yielded signals that were approximately 1.0-1.5 times higher than the commercial fiber. The sputtered fibers extracted low molecular weight analytes that were not detectable with the commercial fiber. The selectivity of the sputtered fibers appears to favor analytes that have both a hydrophobic component and hydrogen-bonding capabilities. No detectable carryover between runs was noted for the sputtered fibers. The repeatability (RSD%) for a fiber (n = 3) was less than 10% for all analytes tested, and the between-fiber reproducibility (n = 3) was 0-15%, generally 5-10%, for all analytes tested. The repeatabilities of our sputtered fibers and the commercial 7 µm PDMS fiber are essentially the same. Fibers could be used for at least 300 extractions without loss of performance. More than 50 compounds were identified in a gas chromatography-mass spectrometry headspace analysis of a real world botanical sample with the 2.0 µm fiber.

Separation and characterisation of detonation nanodiamond by capillary zone electrophoresis.

A new method for the characterisation of purified detonation nanodiamond (DND) using CZE has been developed. The influence of BGE conditions on electrophoretic mobility, peak shape and particle aggregation was investigated, with resultant observations supported by zeta potential approximations and particle size measurements. Sodium tetraborate (pH 9.3), Tris (pH 9.3) and sodium phosphate (pH 7) were used in studying the BGE concentration effect on a commercial source of chemically stabilised DND. The BGE concentration had a strong effect on the stability of DND in suspension. The formation of aggregates of various sizes was observed as BGE concentration increased. The effect of pH on the electromigration of DND was examined using sodium phosphate (pH 8 and 10). The CZE method was subsequently applied to four different DND samples, which had undergone different routes of purification following detonation synthesis. Each sample produced a unique electrophoretic peak or profile in sodium tetraborate buffer (pH 9.3), such that the actual separation of DND samples from different sources could be achieved.

Capillary electrophoresis for the analysis of paralytic shellfish poisoning toxins in shellfish: comparison of detection methods.

Paralytic shellfish toxins (PSTs) are produced by marine and freshwater microalgae and accumulate in shellfish including mussels, oysters, and scallops, causing possible fatalities when inadvertently consumed. Monitoring of PST content of shellfish is therefore important for food safety, with currently approved methods based on HPLC, using pre- or postcolumn oxidation for fluorescence detection (HPLC-FLD). CE is an attractive alternative for screening and detection of PSTs as it is compatible with miniaturization and could be implemented in portable instrumentation for on-site monitoring. In this study, CE methods were developed for C(4) D, FLD, UV absorption detection, and MS-making this first report of C(4) D and FLD for PSTs detection. Because most oxidized toxins are neutral, MEKC was used in combination with FLD. The developed CZE-UV and CZE-C(4) D methods provide better resolution, selectivity, and separation efficiency compared to CZE-MS and MEKC-FLD. The sensitivity of the CZE-C(4) D and MEKC-FLD methods was superior to UV and MS, with LOD values ranging from 140 to 715 ng/mL for CZE-C(4) D and 60.9 to 104 ng/mL for MEKC-FLD. With the regulatory limit for shellfish samples of 800 ng/mL, the CZE-C(4) D and MEKC-FLD methods were evaluated for the screening and detection of PSTs in shellfish samples. While the CZE-C(4) D method suffered from significant interferences from the shellfish matrix, MEKC-FLD was successfully used for PST screening of a periodate-oxidized mussel sample, with results confirmed by HPLC-FLD. This confirms the potential of MEKC-FLD for screening of PSTs in shellfish samples.

Normal-phase high-performance counter-current chromatography for the fractionation of dissolved organic matter from a freshwater source.

Normal-phase high-performance counter-current chromatography (HPCCC) is used to obtain a preliminary fractionation of components in dissolved organic matter (DOM) from a freshwater source. The HPCCC solvent system involved a normal-phase approach with water/methanol (1:1) as the lower stationary phase and hexane/ethyl acetate (1:1) as the upper mobile phase. The critical experiment parameters were optimised: revolution speed 1800 rpm and flow rate 0.15 mL/min. Under these conditions 50 µL of a 0.50 mg/mL DOM solution was loaded. The detection wavelength was monitored at 330 nm in order to isolate the main portion of DOM, which includes substances such as carboxyl-rich alicyclic molecules. By optimising this system it was possible to isolate materials that, according to GC-MS, can be related to molecules with an analogous structural background. Where fraction analysis was not suitable for GC-MS, RP-HPLC with UV absorbance detection was used, showing unique chromatograms for each fraction at both 210 and 330 nm.

Comprehensive analysis of pharmaceutical products using simultaneous mixed-mode (ion-exchange/reversed-phase) and hydrophilic interaction liquid chromatography.

Liquid chromatographic assays were developed using a mixed-mode column coupled in sequence with a hydrophilic interaction liquid chromatography column to allow the simultaneous comprehensive analysis of inorganic/organic anions and cations, active pharmaceutical ingredients, and excipients (carbohydrates). The approach utilized dual sample injection and valve-mediated column switching and was based upon a single high-performance liquid chromatography gradient pump. The separation consisted of three distinct sequential separation mechanisms, namely, (i) ion-exchange, (ii) mixed-mode interactions under an applied dual gradient (reversed-phase/ion-exchange), and (iii) hydrophilic interaction chromatography. Upon first injection, the Scherzo SS C18 column (Imtakt) provided resolution of inorganic anions and cations under isocratic conditions, followed by a dual organic/salt gradient to elute active pharmaceutical ingredients and their respective organic counterions and potential degradants. At the top of the mixed-mode gradient (high acetonitrile content), the mobile phase flow was switched to a preconditioned hydrophilic interaction liquid chromatography column, and the standard/sample was reinjected for the separation of hydrophilic carbohydrates, some of which are commonly known excipients in drug formulations. The approach afforded reproducible separation and resolution of up to 23 chemically diverse solutes in a single run. The method was applied to investigate the composition of commercial cough syrups (Robitussin®), allowing resolution and determination of inorganic ions, active pharmaceutical ingredients, excipients, and numerous well-resolved unknown peaks.

Nano-particle modified stationary phases for high-performance liquid chromatography.

This review covers the latest developments and applications of nano-materials in stationary phase development for various modes of high-performance liquid chromatography. Specific attention is placed upon the development of new composite phases, including the synthetic and immobilisation strategies used, to produce either encapsulated nano-particles, or surface attached nano-particles, layers, coatings and other structures. The resultant chromatographic applications, where applicable, are discussed with comment upon enhanced selectivity and/or efficiency of the nano-particle modified phases, where such effects have been identified. In the main this review covers developments over the past five years and is structured according to the nature of the nano-particles themselves, including carbonaceous, metallic, inorganic, and organopolymer based materials.

Iminodiacetic acid functionalised organopolymer monoliths: application to the separation of metal cations by capillary high-performance chelation ion chromatography.

Lauryl methacrylate-co-ethylene dimethacrylate monoliths were polymerised within fused silica capillaries and subsequently photo-grafted with varying amounts of glycidyl methacrylate (GMA). The grafted monoliths were then further modified with iminodiacetic acid (IDA), resulting in a range of chelating ion-exchange monoliths of increasing capacity. The IDA functional groups were attached via ring opening of the epoxy group on the poly(GMA) structure. Increasing the amount of attached poly(GMA), via photo-grafting with increasing concentrations of GMA, from 15 to 35%, resulted in a proportional and controlled increase in the complexation capacity of the chelating monoliths. Scanning capacitively coupled contactless conductivity detection (sC(4)D) was used to characterise and verify homogenous distribution of the chelating ligand along the length of the capillaries non-invasively. Chelation ion chromatographic separations of selected transition and heavy metals were carried out, with retention factor data proportional to the concentration of grafted poly(GMA). Average peak efficiencies of close to 5,000 N/m were achieved, with the isocratic separation of Na, Mg(II), Mn(II), Co(II), Cd(II) and Zn(II) possible on a 250-mm-long monolith. Multiple monolithic columns produced to the same recipes gave RSD data for retention factors of <15% (averaged for several metal ions). The monolithic chelating ion-exchanger was applied to the separation of alkaline earth and transition metal ions spiked in natural and potable waters.

The use of zeolite 13X as a stationary phase for direct determination of water in organic solvents by high-performance liquid chromatography.

High-performance liquid chromatography (HPLC) method for direct determination of water impurities in various organic solvents using a column (50 × 4.6 mm, ID) packed with 5 µm faujasite and methanol as an eluent was developed. Detection of the water peaks was performed by using either refractometric or indirect spectrophotometric method at 204 nm. In the first case the limit of detection (LOD) and limit of quantitation (LOQ) were 0.001 wt% and 0.0033 wt%, respectively for a sample volume of 20 µL. A linear calibration plot (R2 = 0.9998) for the water content between 0.01 and 9.55 wt% was obtained. The developed method was applied for the direct analysis of various polar organic solvents including acetonitrile, nitromethane, 1,4-dioxane, 2-ethoxyethanol, methanol, dimethyl sulfoxide (DMSO), ethanol and 2-propanol.

Porous graphitized carbon monolith as an electrode material for probing direct bioelectrochemistry and selective detection of hydrogen peroxide.

For the first time, graphitized carbon particles with a high surface area have been prepared and evaluated as a new material for probing direct electrochemistry of hemoglobin (Hb). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) imaging revealed that the carbon monolithic skeleton was constructed by a series of mesopores with irregular shapes and an average pore diameter of ~5.6 nm. With a surface area of 239.6 m(2)/g, carbon particles exhibited three major Raman peaks as commonly observed for carbon nanotubes and other carbon materials, i.e., the sp(3) and sp(2) carbon phases coexisted in the sample. A glassy carbon electrode modified with carbon monoliths and didodecyldimethylammonium bromide exhibited direct electron transfer between Hb molecules and the underlying electrode with a transfer rate constant of 6.87 s(-1). The enzyme electrode displayed a pair of quasi-reversible reduction-oxidation peaks at -0.128 and -0.180 V, reflecting the well-known feature of the heme [Fe(3+)/Fe(2+)] redox couple: a surface-controlled electrochemical process with one electron transfer. This reagentless biosensing approach was capable of detecting H(2)O(2), a simple molecule but plays an important role in analytical and biological chemistry, as low as 0.1 µM with linearity of 0.1-60 µM and a response time of <0.8 s, comparing favorably with other carbon based electrodes (5 s).

Chromatographic properties of hydrogenated microdiamond synthesized by high pressure and high temperature.

Adsorption and chromatographic properties of oxidized and hydrogenated 'high pressure and high temperature' synthesised diamond (HPHT) are studied using high-performance liquid chromatography. The retention factors of organic cation (benzyltributylammonium chloride), weak base (aniline), weak acid (benzoic acid), strong acid (benzenesulfonic acid), hydrophobic toluene, and hydrophilic uracil are obtained at varied pH, organic solvent content, and ionic strength of mobile phase. Both adsorbents exhibited moderate polarity with a mixed-mode retention mechanism with a combination of electrostatic, hydrophobic and hydrophilic interactions. Unexpectedly, hydrogenated HPHT revealed significant anion-exchange properties under acidic conditions and cation-exchange properties under alkaline conditions, while only cation-exchange selectivity was noted for oxidized HPHT across the enntire pH range. The retention factors obtained for a set of model compounds including n-alkyl-, polymethyl-, nitro- and halogenated benzenes correlated well with their hydrophobicity (logP) values. The thermal stability of the adsorbent and immutability of retention mechanisms involved was confirmed by linear van't Hoff plots for the investigated compounds.

Pellicular particles with spherical carbon cores and porous nanodiamond/polymer shells for reversed-phase HPLC.

A new stationary phase for reversed-phase high performance liquid chromatography (RP HPLC) was created by coating spherical 3 µm carbon core particles in a layer-by-layer (LbL) fashion with poly(allylamine) (PAAm) and nanodiamond. Unfunctionalized core carbon particles were characterized by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), time-of-flight secondary ion mass spectrometry (ToF-SIMS), and Raman spectroscopy. After LbL of PAAm and nanodiamond, which yields ca. 4 µm core-shell particles, the particles were simultaneously functionalized and cross-linked using a mixture of 1,2-epoxyoctadecane and 1,2,7,8-diepoxyoctane to obtain a mechanically stable C(18)/C(8) bonded outer layer. Core-shell particles were characterized by SEM, and their surface area, pore diameter, and volume were determined using the Brunauer-Emmett-Teller (BET) method. Short stainless steel columns (30 × 4.6 mm i.d.) were packed and the corresponding van Deemter plots obtained. The Supporting Information contains a MATLAB program used to fit the van Deemter data. The retentions of a suite of analytes were investigated on a conventional HPLC at various organic solvent compositions, pH values of mobile phases, including extreme pH values, and column temperatures. At 60 °C, a chromatogram of 2,6-diisopropylphenol showed 71,500 plates/m (N/m). Chromatograms obtained under acidic conditions (pH 2.7) of a mixture of acetaminophen, diazepam, and 2,6-diisopropylphenol and a mixture of phenol, 4-methylphenol, 2-chlorophenol, 4-chlorophenol, 4-bromophenol, and 1-tert-butyl-4-methylphenol are presented. Retention of amitriptyline, cholesterol, and diazinon at temperatures ranging from 35 to 80 °C and at pH 11.3 is reported. A series of five basic drugs was also separated at this pH. The stationary phase exhibits considerable hydrolytic stability at high pH (11.3) and even pH 13 over extended periods of time. An analysis run on a UHPLC with a "sandwich" injection appeared to reduce extra column band broadening and gave best efficiencies of 110,000-120,000 N/m.

Hydrophobicity of polymer based anion-exchange columns for ion chromatography.

The regularities of the retention of alkanoic and alkanesulfonic acids homologues were investigated for the set of 36 anion-exchange columns produced by various manufacturers. The role of hydrophobic and electrostatic interactions in the retention and separation of organic anions was studied. The methylene selectivity increments α(CH2) were measured for the studied columns with 10 mM sodium hydroxide eluent. The influence of matrix, surface area, polar group structure, ion-exchange capacity, the density of charged functional groups on the surface and other characteristics of anion-exchangers on resin hydrophobicity was considered. A unified approach for the measurements of hydrophobic properties of anion-exchange resins is proposed and the ratio of chloride retention factor (k Cl) to α(CH2) was introduced as mixed-mode factor. The synergetic effect of electrostatic and hydrophobic interactions was observed.

Recent advances and applications of synthetic diamonds in solid-phase extraction and high-performance liquid chromatography.

Since the advent of diamond-based adsorbents in the late 1960s, the interest in their use for solid-phase extraction (SPE) and high-performance liquid chromatography (HPLC) has steadily increased. This is primarily due to their unique properties, such as extreme chemical and thermal stability, high mechanical strength and biocompatibility, and complex mixed-mode retention mechanisms. Currently, the most commonly used synthetic diamonds in SPE and HPLC are detonation nanodiamonds (DND), high-pressure high-temperature (HPHT) diamonds, and chemical vapour deposition (CVD) diamonds. These diamonds have been either used as individual particles (in both modified and unmodified forms), or for surface modification, or entrapped within composites and core-shell particles to develop new diamond-based adsorbents. These diamond-based adsorbents have been used for a variety of applications, including streamlined proteome analysis; extraction of anions, cations, actinides, uranium, lanthanides, alkaline earth metals, transition metals, and post-transition metals; and development of reversed-phase, normal phase, hydrophilic interaction, ion chromatography, and mixed-mode liquid chromatography columns, to name but a few. These varied applications of different types of diamonds are typically governed by their specific properties. This review discusses the various surface and bulk properties of DND, HPHT diamonds, and CVD diamonds that facilitate or limit their use in different SPE and HPLC based applications.