Recent Progress of Wearable Triboelectric Nanogenerator-Based Sensor for Pulse Wave Monitoring.

Today, cardiovascular diseases threaten human health worldwide. In clinical practice, it has been concluded that analyzing the pulse waveform can provide clinically valuable information for the diagnosis of cardiovascular diseases. Accordingly, continuous and accurate monitoring of the pulse wave is essential for the prevention and detection of cardiovascular diseases. Wearable triboelectric nanogenerators (TENGs) are emerging as a pulse wave monitoring biotechnology due to their compelling characteristics, including being self-powered, light-weight, and wear-resistant, as well as featuring user-friendliness and superior sensitivity. Herein, a comprehensive review is conducted on the progress of wearable TENGs for pulse wave monitoring. Firstly, the four modes of operation of TENG are briefly described. Secondly, TENGs for pulse wave monitoring are classified into two categories, namely wearable flexible film-based TENG sensors and textile-based TENG sensors. Next, the materials, fabrication methods, working mechanisms, and experimental performance of various TENG-based sensors are summarized. It concludes by comparing the characteristics of the two types of TENGs and discussing the potential development and challenges of TENG-based sensors in the diagnosis of cardiovascular diseases and personalized healthcare.

Eco-Friendly Fabrication of Transparent Superhydrophobic Coating with Excellent Mechanical Robustness, Chemical Stability, and Long-Term Outdoor Durability.

Surfaces that possess both superhydrophobicity and high transparency at the same time recently have attracted extensive attention in outdoor applications. However, fabrication and application of transparent superhydrophobic coating usually face following challenges: the micro-nano hierarchical structure required for superhydrophobicity usually leads to a decrease in the light transmittance due to its light trapping effect; fluorine-containing materials used in the preparation of superhydrophobic surfaces are potentially harmful to humans and the environment; and the superhydrophobic surface is easily destroyed by external factors. In this work, a transparent superhydrophobic coating was fabricated via an inexpensive and eco-friendly two-step method, that is, dipping glass substrate into the polydimethylsiloxane/SiO2 suspension followed by calcination treatment. The prepared coating showed superhydrophobicity with a water contact angle of 164° and a sliding angle less than 1.0°. In the visible light region with the wavelength range of 300-900 nm, the maximal transmittance of the superhydrophobic coating was ∼91.4%, which is higher than that of the untreated glass substrate (∼90.9%). Moreover, the coating can maintain superhydrophobicity and high transmittance after sandpaper abrasion, water flow impact, immersion in strong acid/alkaline solution, UV irradiation, and long-term outdoor exposure. We believing that the coating has huge potential value in outdoor applications.

Antibacterial PVDF Coral-Like Hierarchical Structure Composite Film Fabrication for Self-Cleaning and Radiative Cooling Effect.

Passive radiative cooling (PRC) is a zero-energy-consumption technology that reflects sunlight and radiates heat to cold outer space. In this work, a porous poly(vinylidene fluoride)-poly(methyl methacrylate) (PVDF-PMMA) composite film is fabricated by decorating zinc-imidazolate metal-organic framework (MOF) (ZIF-8) particles obtained by phase inversion. Due to the competent scattering via the coral-like hierarchical structures and the vibration excitations of specific functional groups, the prepared film exhibits good solar reflectance (92.6%) and intermediate infrared emittance (99.1%), with an average sub-ambient cooling of 10.4 °C under a solar radiation intensity of 0.6 AM1.5. Additionally, poly(vinylidene fluoride) has a low surface energy, while the ZIF-8 particles and coral-like hierarchical structures enhance the surface roughness, endowing the surface with significant superhydrophobicity characterized by a water contact angle (WCA) of 157.5° and a sliding angle (SA) of 2°. These films exhibit excellent antibacterial properties. When the content of ZIF-8 particles in the film is 300 mg·L-1, the antibacterial rate reaches 100% after 1 h of treatment. Thus, the ZIF-8 porous poly(vinylidene fluoride)-poly(methyl methacrylate) composite (ZPPP) film has potential application prospects in areas with high health and environmental requirements, such as cold chain transportation and public spaces.

Experimental Study on Energy-Free Superhydrophobic Radiative Cooling Versatile Film with Enhanced Environmental Tolerance.

Clean, energy-free methods of cooling are an effective way to respond to the global energy crisis. To date, cooling materials using passive daytime radiative cooling (RC) technology have been applied in the fields of energy-efficient buildings, solar photovoltaic cooling, and insulating textiles. However, RC materials frequently suffer from comprehensive damage to their microstructure, resulting in the loss of their initial cooling effect in complex outdoor environments. Here, a superhydrophobic daytime passive RC porous film with environmental tolerance (SRCP film) was fabricated, which integrated strong solar reflectivity (approximately 90%), mid-infrared emissivity (approximately 0.97), and superhydrophobicity (water contact angle (WCA) of 160° and sliding angle of 3°). This study revealed that SRCP film had an average reflectivity of 14.3% higher than SiO2 particles in the 0.3-2.5 µm wavelength region, achieving a cooling effect of 13.2 °C in ambient conditions with a solar irradiance of 946 W·m-2 and a relative humidity of 74% due to the synergistic effect of effective solar reflection and thermal infrared emission. In addition, empirical results showed that the attained films possessed outstanding environmental tolerance, maintaining high WCA (156°), stable cooling effect (8.3 °C), and low SiO2 loss (less than 5.1%) after 30 consecutive days of UV irradiation and 14 days of corrosion with acidic and alkaline solutions. More importantly, this work could be flexibly prepared by various methods without the use of any fluorine-containing reagents, which greatly widens the practical application scope.

Effects of Thermal Stress on the Formation and Cracking Behavior of Nickel-Based Superalloys by Selective Laser Melting Based on a Coupled Thermo-Mechanical Model.

Complex thermal cycles and stress fields commonly occur in the selective laser melting process for nickel-based superalloys, which are prone to generating cracks and decreasing the performance of forming parts. In this paper, the reasons for cracking were analyzed by combining the experiment with the evolution behavior of the temperature field/stress field during the solidification process of a nickel-based superalloy (FGH96) via a three-dimensional finite element thermo-mechanical coupling model. It showed that a radial temperature distribution of the melting pool led to a similar distributed stress; as a result, the value declined slowly along the scanning direction but declined quickly along the direction perpendicular to the scanning direction. A stress concentration with maximum stress up to 339 MPa was found at the center of the molten pool, easily causing a crack in SLM. It was found that both the initiation and propagation of the cracks were along the grain growth direction and were affected by the epitaxial growth of columnar crystals. For the case of process parameters with relatively high power or low scanning speed, the stress value of the molten pool during solidification was more than 370 MPa so as to form a large area of cracks. The adjustment of the rotation angle between the adjacent layers was effective at avoiding stress accumulation in the building direction and prevent the formation of long grain boundaries, thus avoiding crack propagation. The present study lays a foundation for the wide applications of selective laser melting technologies in nickel-based superalloys.