Correlating Ex Vivo Carotid Calcification Measurements With Cerebrovascular Symptoms: A Proof-of-Concept Study.

BACKGROUND AND PURPOSE: The purpose of this study is to examine the ability of ex vivo derived Agatston, Volume, and Density-Volume calcium scores or calcium density measurements to differentiate between carotid plaques based on preoperative cerebrovascular symptomatology. METHODS: Thirty-eight carotid plaques were acquired from standard endarterectomy. Micro-computed tomography was performed on the ex vivo samples. Image series were downsampled to represent the resolution of clinical multidetector computed tomography. Agatston, Volume, and Density-Volume carotid calcium scores were then calculated using coronary methodologies. The fractions of low- and high-density calcification were also determined. RESULTS: The coronary calcium scores could not differentiate between carotid plaques from asymptomatic versus symptomatic patients. However, plaques from asymptomatic patients contained significantly lower fractions of low-density calcification and higher fractions of high-density calcification. CONCLUSIONS: Screening for carotid calcium density in noncontrast computed tomography could reflect plaque stability.

On the influence of wall calcification and intraluminal thrombus on prediction of abdominal aortic aneurysm rupture.

OBJECTIVE: Parameters other than maximum diameter that predict rupture of abdominal aortic aneurysms (AAAs) may be helpful for risk-benefit analysis in individual patients. The aim of this study was to characterize the biomechanical-structural characteristics associated with AAA walls to better identify the related mechanistic variables required for an accurate prediction of rupture risk. METHODS: Anterior AAA wall (n = 40) and intraluminal thrombus (ILT; n = 114) samples were acquired from 18 patients undergoing open surgical repair. Biomechanical characterization was performed using controlled circumferential stretching tests combined with a speckle-strain tracking technique to quantify the spatial heterogeneity in deformation and localized strains in the AAA walls containing calcification. After mechanical testing, the accompanying microstructural characteristics of the AAA wall and ILT types were examined using electron microscopy. RESULTS: No significant correlation was found between the AAA diameter and the wall mechanical properties in terms of Cauchy stress (rs = -0.139; P = .596) or stiffness (rs = -0.451; P = .069). Quantification of significant localized peak strains, which were concentrated in the tissue regions surrounding calcification, reveals that peak strains increased by a mean of 174% as a result of calcification and corresponding peak stresses by 18.2%. Four ILT types characteristic of diverse stages in the evolving tissue microstructure were directly associated with distinct mechanical stiffness properties of the ILT and underlying AAA wall. ILT types were independent of geometric factors, including ILT volume and AAA diameter measures (ILT stiffness and AAA diameter [rs = -0.511; P = .074]; ILT stiffness and ILT volume [rs = -0.245; P = .467]). CONCLUSIONS: AAA wall stiffness properties are controlled by the load-bearing capacity of the noncalcified tissue portion, and low stiffness properties represent a highly degraded vulnerable wall. The presence of calcification that is contiguous with the inner wall causes severe tissue overstretching in surrounding tissue areas. The results highlight the use of additional biomechanical measures, detailing the biomechanical-structural characteristics of AAA tissue, that may be a helpful adjunct to improve the accuracy of rupture prediction.

An appraisal of the computed axial tomographic appearance of the human mesentery based on mesenteric contiguity from the duodenojejunal flexure to the mesorectal level.

OBJECTIVE: The human mesentery is now regarded as contiguous from the duodenojejunal (DJ) to anorectal level. This interpretation prompts re-appraisal of computed tomography (CT) images of the mesentery. METHODS: A digital model and reference atlas of the mesentery were generated using the full-colour data set of the Visible Human Project (VHP). Seventy one normal abdominal CT images were examined to identify mesenteric regions. CT appearances were correlated with cadaveric and histological appearances at corresponding levels. RESULTS: Ascending, descending and sigmoid mesocolons were identifiable in 75%, 86% and 88% of the CTs, respectively. Flexural contiguity was evident in 66%, 68%, 71% and 80% for the ileocaecal, hepatic, splenic and rectosigmoid flexures, respectively. A posterior mesocolic boundary corresponding to the anterior renal fascia was evident in 40% and 54% of cases on the right and left, respectively. The anterior pararenal space (in front of the boundary) corresponded to the mesocolon. CONCLUSIONS: Using the VHP, a mesenteric digital model and reference atlas were developed. This enabled re-appraisal of CT images of the mesentery, in which contiguous flexural and non-flexural mesenteric regions were repeatedly identifiable. The anterior pararenal space corresponded to the mesocolon. KEY POINTS: The Visible Human Project (VHP) allows direct identification of mesenteric structures. Correlating CT and VHP allows identification of flexural and non-flexural mesenteric components. Radiologic appearance of intraperitoneal structures is assessed, starting from a mesenteric platform.

Preprocedural cardiac computed tomography versus transesophageal echocardiography for planning left atrial appendage occlusion procedures.

The heterogeneous anatomy of the left atrial appendage (LAA) necessitates preprocedural imaging essential for planning of percutaneous LAA occlusion (LAAO) procedures. While transoesophageal echocardiography (TOE) remains the gold standard, cardiac computed tomography (CT) is becoming increasingly popular. To address the lack of consensus on the optimal imaging modality, we compared the outcomes of preprocedural TOE versus CT for LAAO procedure planning. A retrospective single-center cohort study of all LAAO procedures was performed to compare the outcomes of patients receiving preprocedural TOE versus those receiving CT. The primary outcome was procedural success and rate of major adverse events. The secondary outcomes were total procedure time, rate of device size change, and maximum landing zone diameter. A total of 64 patients was included. Of these, 25 (39.1%) underwent TOE and 39 (60.9%) underwent CT. There was no significant difference in the procedural success rate (96.0% vs. 100%, P = 0.39) or major adverse event rate (4.0% vs. 5.1%, P > 0.99) between TOE and CT patients. Compared with TOE, CT was associated with significantly shorter median procedure time (103 min vs. 124 min, P = 0.02) and a lower rate of device size change (7.7% vs. 28.0%, P = 0.04). Compared to CT, TOE was associated with a significantly smaller mean maximum landing zone diameter (20.8 mm vs. 25.8 mm, P < 0.01) and a higher rate of device upsizing (24.0% vs. 2.6%, P = 0.01). No significant difference in detected residual leak rates was found between TOE and CT (50.0% vs. 52.2%, P > 0.99). Planning of LAAO procedures with CT is associated with a shorter total procedure time and a lower rate of device size change and is less likely to underestimate the maximum landing zone diameter.

Coronary artery imaging with single-source rapid kilovolt peak-switching dual-energy CT.

PURPOSE: To evaluate beam-hardening (BH) artifact reduction in coronary computed tomography (CT) angiography with dual-energy CT, to define the optimal monochromatic-energy levels for coronary and myocardial signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) in dual-energy CT, and to compare these levels with single-energy CT. MATERIALS AND METHODS: The study was approved by the institutional review board and/or ethics committee at each site. Patients provided informed consent. Thirty-nine patients were prospectively enrolled to undergo dual-energy CT, and 25 also underwent single-energy CT. Myocardial and coronary SNR, CNR, and iodine concentration were measured across multiple segments at varying monochromatic energy levels (40-140 keV). BH was defined as signal decrease in basal inferior wall versus midinferior wall, and signal increase in midseptum versus midinferior wall. Generalized estimating equation was used to identify optimal monochromatic-energy levels and compare them with single-energy CT. RESULTS: BH was noted at single-energy CT with basal inferior wall mean reduction of 19.7 HU ± 29.2 (standard deviation) and midseptum increase of 46.3 HU ± 36.3. There was reduction in this artifact at 90 keV or greater (1.7 HU ± 18.4 in basal inferior wall and 20.1 HU ± 37.5 in midseptum at 90 keV; P < .05). SNR and CNR were higher in the myocardium and coronary arteries at 60-80 keV than single-energy CT (myocardium: SNR, 3.02 vs 2.39, and CNR, 6.73 vs 5.16; coronary arteries: SNR, 10.83 vs 7.75, and CNR, 13.31 vs 9.54; P < .01). Mean iodine concentration in resting myocardium was 2.19 mg/mL ± 0.57. CONCLUSION: Rapid kilovolt peak-switching dual-energy CT resulted in significant BH reduction and improvements in SNR and CNR in the myocardium and coronary arteries.

Severe Aortic Valvular Incompetence From IgG4-Related Disease: An Unusual Entity.

IgG4-related disease (IgG4-RD) is a new clinical entity characterized by lymphoplasmacytic lesions rich in IgG4-positive plasma cells. Myocardial involvement is extremely rare and not a typical cardiovascular manifestation of IgG4-RD. We report a rare case of IgG4-RD-associated myocardial mass causing severe aortic incompetence, successfully treated with surgery and corticosteroids. (Level of Difficulty: Intermediate.).

Comparative analysis of calcification parameters with Agatston Score approximations for ex vivo atherosclerotic lesions.

BACKGROUND: The Agatston Calcium Score is a predictor of major adverse cardiovascular events but it is unable to identify high-risk lesions. Recent research suggests that examining calcification phenotype could be more indicative of plaque stability. OBJECTIVE: To examine the Agatston score's ability to determine atherosclerotic calcification phenotype. METHODS: Micro-Computed Tomography was performed on 20 carotid and 20 peripheral lower limb lesions. ImageJ pixel histogram analysis quantified the non-calcified (≥30HU, <130HU) and calcified (≥130HU) tissue volumes. ImageJ '3D Objects Counter' plugin determined the calcified particle count, volumes and maximum attenuation density of each particle. Image stacks were subsequently downsampled to a resolution of 0.7 × 0.7 × 3 mm and an approximation for the Extra-Coronary Calcium Scores (ECCS) were calculated. Spearman's correlation examined the relationships between ECCS approximations and calcification parameters. RESULTS: ECCS has a strong positive correlation with the Calcified Volume Fraction (CVF) (rs = 0.865, p < 0.0005), weak positive correlations with Calcified Particle Fraction (CPF) (rs = 0.422, p = 0.007) and Microcalcification Fraction (micro-CF) (rs = 0.361, p = 0.022). There is no correlation evident between ECCS and Calcified Particle Index (CPI) (rs = -0.162, p = 0.318). It is apparent that there is a high prevalence of microcalcifications in both carotid and peripheral lower limb lesions. Additionally, an inverse relationship exists between calcified particle volume and maximum-recorded attenuation density. CONCLUSION: The density-weighted Agatston calcium scoring methodology needs to be reviewed. Calcium scoring which differentiates between critical calcification morphologies, rather than presenting a density-weighted score, is required to direct high-risk plaques towards tailored treatment.

Relating the mechanical properties of atherosclerotic calcification to radiographic density: A nanoindentation approach.

Calcification morphology can determine atherosclerotic plaque stability and is associated with increased failures rates for endovascular interventions. Computational efforts have sought to elucidate the relationship between calcification and plaque rupture in addition to predicting tissue response during aggressive revascularisation techniques. However, calcified material properties are currently estimated and may not reflect real tissue conditions. The objective of this study is to correlate calcification mechanical properties with three radiographic density groups obtained from corresponding Computed Tomography (CT) images. Seventeen human plaques extracted from carotid (n = 10) and peripheral lower limb (n = 7) arteries were examined using micro-computed tomography (µCT), simultaneously locating the calcified deposits within their internal structure and quantifying their densities. Three radiographic density groups were defined based on the sample density distribution: (A) 130-299.99 Hounsfield Units (HU), (B) 300-449.99 HU and (C) >450 HU. Nanoindentation was employed to determine the Elastic Modulus (E) and Hardness (H) values within the three density groups. Results reveal a clear distinction between mechanical properties with respect to radiographic density groups (p < 0.0005). No significant differences exist in the density-specific behaviours observed between carotid and peripheral samples. Previously defined calcification classifications indicate an association with specific radiographic density patterns. Scanning Electron Microscopy (SEM) examination revealed that density group A regions consist of both calcified and non-calcified tissues. Further research is required to define the radiographic thresholds which identify varying degrees of tissue calcification. This study demonstrates that the mechanical properties of fully mineralised atherosclerotic calcification emulate that of bone tissues (17-25 GPa), affording computational models with accurate material parameters. STATEMENT OF SIGNIFICANCE: Global mechanical characterisation techniques disregard the heterogeneous nature of atherosclerotic lesions. Previous nanoindentation results for carotid calcifications have displayed a wide range. This study evaluates calcification properties with respect to radiographic density obtained from Micro-CT images. This is the first work to characterise calcifications from peripheral lower limb arteries using nanoindentation. Results demonstrate a strong positive correlation between radiographic density and calcification mechanical properties. Characterising calcifications using their density values provides clarity on the variation in published properties for calcified tissues. Furthermore, this study confirms the hypothesis that fully calcified plaque tissue behaviour similar to that of bone. Appropriate material parameters for calcified tissues can now be employed in computational simulations.

Effect of a novel vendor-specific motion-correction algorithm on image quality and diagnostic accuracy in persons undergoing coronary CT angiography without rate-control medications.

BACKGROUND: Although coronary CT angiography (CTA) shows high diagnostic performance for detection and exclusion of obstructive coronary artery disease, limited temporal resolution of current-generation CT scanners may allow for motion artifacts, which may result in nonevaluable coronary segments. OBJECTIVE: We assessed a novel vendor-specific motion-correction algorithm for its effect on image quality and diagnostic accuracy. METHODS: Thirty-six consecutive patients with severe aortic stenosis undergoing coronary CTA without rate control and invasive coronary angiography as part of an evaluation for transcatheter aortic valve replacement. We compared image quality and diagnostic accuracy between standard (STD) and motion-corrected (MC) reconstructions. Coronary CTAs were interpreted in an intent-to-diagnose fashion by 2 experienced readers; a third reader provided consensus for interpretability and obstructive coronary stenosis (≥50% stenosis). All studies were interpreted with and without motion correction using both 45% and 75% of the R-R interval for reconstructions. Quantitative coronary angiography was performed by a core laboratory. RESULTS: Mean age was 83.0 ± 6.4 years; 47% were men. Overall image quality (graded 1-4) was higher with the use of MC versus STD reconstructions (2.9 ± 0.9 vs 2.4 ± 1.0; P < 0.001). MC reconstructions showed higher interpretability on a per-segment [97% (392/406) vs 88% (357/406); P < 0.001] and per-artery [96% (128/134) vs 84% (112/134); P = 0.002] basis, with no difference on a per-patient level [92% (33/36) vs 89% (32/36); P = 1.0]. Diagnostic accuracy by MC reconstruction was higher than STD reconstruction on a per-segment [91% (370/406) vs 78% (317/406); P < 0.001] and per-artery level [86% (115/134) vs 72% (96/134); P = 0.007] basis, with no significant difference on a per-patient level [86% (31/36) vs 69% (25/36); P = 0.16]. CONCLUSIONS: The use of a novel MC algorithm improves image quality, interpretability, and diagnostic accuracy in persons undergoing coronary CTA without rate-control medications.

Rapid automated measurement of body fat distribution from whole-body MRI.

OBJECTIVE: The purpose of this article is to determine the feasibility of using computer-assisted diagnosis (CAD) techniques to automatically identify, localize, and measure body fat tissue from a rapid whole-body MRI examination. CONCLUSION: Whole-body MRI in conjunction with CAD allows a fast, automatic, and accurate approach to body fat measurement and localization and can be a useful alternative to body mass index. Whole-body fat analysis can be achieved in less than 5 min.