Effect of Probe-Probe Distance on the Stability of DNA Hybrids on Surfaces.

We have used temperature gradient surface plasmon resonance (SPR) measurements to quantitatively evaluate how the stability of different types of hybrids formed with DNA probes on surfaces is affected by probe spacing. SPR sensors with different average surface densities of probes were prepared by coadsorbing probes with lateral spacers strands comprised of phosphorothioated adenine nucleotides (A15*). Increasing the fraction of A15* spacers in the immobilization solution results in larger distances between probes on the sensor, determined here using a combination of SPR and X-ray photoelectron spectroscopy (XPS) measurements. The hybridization activities of probes were simultaneously measured over a temperature range that spanned the denaturation temperature (Tm) of hybrids by applying a spatial temperature gradient across the sensor surface. The resulting temperature profiles of hybridization activity show how the stability of hybrids increases as either the distance between probes or the ionic strength of the hybridization buffer increase. Additionally, hybridization activity profiles sharpen as the spacing between probes increases, indicating more homogeneous hybridization behavior of probes. The results provide quantitative experimental data for testing theoretical models of stability, supporting models that account for both repulsive interactions between DNA strands and local variability in probe surface density.

Temperature Gradient Approach for Rapidly Assessing Sensor Binding Kinetics and Thermodynamics.

We report a highly resolved approach for quantitatively measuring the temperature dependence of molecular binding in a sensor format. The method is based on surface plasmon resonance (SPR) imaging measurements made across a spatial temperature gradient. Simultaneous recording of sensor response over the range of temperatures spanned by the gradient avoids many of the complications that arise in the analysis of SPR measurements where temperature is varied. In addition to simplifying quantitative analysis of binding interactions, the method allows the temperature dependence of binding to be monitored as a function of time, and provides a straightforward route for calibrating how temperature varies across the gradient. Using DNA hybridization as an example, we show how the gradient approach can be used to measure the temperature dependence of binding kinetics and thermodynamics (e.g., melt/denaturation profile) in a single experiment.

Influence of attachment strategy on the thermal stability of hybridized DNA on gold surfaces.

The thermal stabilities of double-stranded DNA hybrids immobilized on gold surfaces are shown to be significantly affected by the conformation of the hybrid. To analyze this behavior, DNA probes were immobilized using attachment strategies where the nucleotides within the strand had varying levels of interactions with the gold substrate. The abilities of these probes to form double-stranded hybrids with solution DNA targets were evaluated by surface plasmon resonance (SPR) over a temperature range 25-60 °C. The measurements were used to construct thermal stability profiles for hybrids in each conformation. We observe that DNA hybrids formed with probe strands that interact extensively with the gold surface have stability profiles that are shifted lower by 5-10 °C compared to hybrids formed with end-tethered probes that have fewer interactions with the surface. The results provide an understanding of the experimental conditions in which these weaker DNA hybrids can form and show the additional complexity of evaluating denaturation profiles generated from DNA on surfaces.

Impact of DNA-surface interactions on the stability of DNA hybrids.

The structure and stability of single- and double-stranded DNA hybrids immobilized on gold are strongly affected by nucleotide-surface interactions. To systematically analyze the effects of these interactions, a set of model DNA hybrids was prepared in conformations that ranged from end-tethered double-stranded to directly adsorbed single-stranded (hairpins) and characterized by surface plasmon resonance (SPR) imaging, X-ray photoelectron spectroscopy (XPS), fluorescence microscopy, and near edge X-ray absorption fine structure (NEXAFS) spectroscopy. The stabilities of these hybrids were evaluated by exposure to a series of stringency rinses in solutions of successively lower ionic strength and by competitive hybridization experiments. In all cases, directly adsorbed DNA hybrids are found to be significantly less stable than either free or end-tethered hybrids. The surface-induced weakening and the associated asymmetry in hybridization responses of the two strands forming hairpin stems are most pronounced for single-stranded hairpins containing blocks of m adenine (A) nucleotides and n thymine (T) nucleotides, which have high and low affinity for gold surfaces, respectively. The results allow a qualitative scale of relative stabilities to be developed for DNA hybrids on surfaces. Additionally, the results suggest a route for selectively weakening portions of immobilized DNA hybrids and for introducing asymmetric hybridization responses by using sequence design to control nucleotide-surface interactions--a strategy that may be used in advanced biosensors and in switches or other active elements in DNA-based nanotechnology.

Controlled and efficient hybridization achieved with DNA probes immobilized solely through preferential DNA-substrate interactions.

Quantitative and reproducible data can be obtained from surface-based DNA sensors if variations in the conformation and surface density of immobilized single-stranded DNA capture probes are minimized. Both the conformation and surface density can be independently and deterministically controlled by taking advantage of the preferential adsorption of adenine nucleotides (dA) on gold, as previously demonstrated using a model system in Opdahl, A.; Petrovykh, D. Y.; Kimura-Suda, H.; Tarlov, M. J.; Whitman, L. J. Proc. Natl. Acad. Sci. U.S.A. 2007, 104, 9-14. Here, we describe the immobilization and subsequent hybridization properties of a 15-nucleotide DNA probe sequence that has additional m adenine nucleotides, (dA)(m), at the 5' end. Quantitative analysis of immobilization and hybridization for these probes indicates that the (dA)(m) block preferentially adsorbs on gold, forcing the probe portion of the strand to adopt an upright conformation suited for efficient hybridization. In addition, a wide range of probe-to-probe lateral spacing can be achieved by coimmobilizing the probe DNA with a lateral spacer, a strand of k adenine nucleotides, (dA)(k). Altering either the length or relative concentration of the (dA)(k) spacers added during probe immobilization controls the average surface density of probes; the density of probes, in turn, systematically modulates their hybridization with solution targets.

AFM and SFG studies of pHEMA-based hydrogel contact lens surfaces in saline solution: adhesion, friction, and the presence of non-crosslinked polymer chains at the surface.

The surfaces of two types of soft contact lenses neutral and ionic hydrogels--were characterized by atomic force microscopy (AFM) and sum-frequency-generation (SFG) vibrational spectroscopy. AFM measurements in saline solution showed that the presence of ionic functional groups at the surface lowered the friction and adhesion to a hydrophobic polystyrene tip. This was attributed to the specific interactions of water and the molecular orientation of hydrogel chains at the surface. Friction and adhesion behavior also revealed the presence of domains of non-crosslinked polymer chains at the lens surface. SFG showed that the lens surface became partially dehydrated upon exposure to air. On this partially dehydrated lens surface, the non-crosslinked domains exhibited low friction and adhesion in AFM. Fully hydrated in saline solution, the non-crosslinked domains extended more than tens of nanometers into solution and were mobile.

Surface mechanical properties of pHEMA contact lenses: viscoelastic and adhesive property changes on exposure to controlled humidity.

The surface mechanical properties of poly(hydroxyethyl)methacrylate (pHEMA)-based contact lenses were monitored as a function of humidity by atomic force microscopy (AFM). Surface viscoelastic and adhesion values were extracted from AFM force versus distance interaction curves and were found to be strongly dependent on the bulk water content of the lens and on the relative humidity. At low relative humidity, 40-50%, the dehydration rate from the surface is faster than the hydration rate from the bulk, leading to a rigid surface region that has mechanical properties similar to those measured on totally dehydrated lenses. At relative humidity values > 60%, the dehydration rate from the lens surface rapidly decreases, leading to higher surface water content and a softer surface region. The results indicate that, in an ocular environment, although the bulk of the pHEMA contact lens is hydrated, the surface region may be in a transition between a dehydrated glassy state and a hydrated rubbery state.

Adsorption behavior of DNA-wrapped carbon nanotubes on self-assembled monolayer surfaces.

We have examined the adsorption of DNA-wrapped single-walled carbon nanotubes (DNA-SWNTs) on hydrophobic, hydrophilic, and charged surfaces of alkylthiol self-assembled monolayers (SAMs) on gold. Our goal is to understand how DNA-SWNTs interact with surfaces of varying chemical functionality. These samples were characterized using reflection absorption FTIR (RAIRS), X-ray photoelectron spectroscopy (XPS), and Raman spectroscopy. We have found that DNA-SWNTs preferentially adsorb to positively charged amine-terminated SAMs and to bare gold surfaces versus hydrophobic methyl-terminated or negatively charged carboxylic acid-terminated SAMs. Examination of the adsorption on gold of single-strand DNA (ssDNA) of the same sequence used to wrap the SWNTs suggests that the DNA wrapping plays a role in the adsorption behavior of DNA-SWNTs.

Independent control of grafting density and conformation of single-stranded DNA brushes.

We describe self-assembly of ssDNA brushes that exploits the intrinsic affinity of adenine nucleotides (dA) for gold surfaces. The grafting density and conformation of these brushes is deterministically controlled by the length of the anchoring dA sequences, even in the presence of thymine nucleotides (dT). We produce and characterize brushes of model block-oligonucleotides, d(T(m)-A(n)), with systematically varied lengths m and n of the thymine and adenine blocks [denoted d(T(m)) and d(A(n)), respectively]. The hairpin conformation, dominant for self-complementary d(T(m)-A(n)) oligos in solution, is disrupted by the high preferential affinity of dA for gold surfaces. As a result, the d(T(m)-A(n)) oligos adsorb as a brush of d(T) strands immobilized via the d(A) blocks. Quantitative analysis by FTIR spectroscopy and x-ray photoelectron spectroscopy (XPS) reveals a unique feature of DNA immobilization via d(A) blocks: The surface density of dA nucleotides is close to saturation and is nearly independent of d(A) block length. Accordingly, the lateral spacing (grafting density) of the d(T) blocks is determined by the length of the d(A) blocks. The d(T) blocks extend away from the surface in a brush-like conformation at a lateral spacing 2-3 times larger (a grafting density 5-10 times lower) than in analogous films immobilized via standard thiol linkers. This combination of brush-like conformation and low saturation grafting density is expected to increase the efficiency of DNA hybridization at surfaces. Therefore, immobilization via d(A) blocks offers a method of producing DNA brushes with controlled properties for applications in biotechnology and nanotechnology.

Synthesis and structural characterization of glucopyranosylamide films on gold.

Self-assembled monolayers (SAMs) of glucose derivatives on gold have been prepared from alpha- and beta-glucopyranosylamide derivatives. The glucosyl conjugates were synthesized stereoselectively via the in situ generation of glucosyl isoxazolines followed by treatment with thiopyridyl esters. The resulting film structures were characterized by atomic force microscopy, reflection Fourier transform infrared spectroscopy, and X-ray photoelectron spectroscopy. The experimental data indicated that alpha- or beta-linked glucopyranosylamide derivatives with free hydroxyl groups attach to gold via the thiol linker. Both derivatives form monolayer films with high packing densities--comparable to those typically observed for alkanethiol monolayers on gold. Acetate analogues of these conjugates do not form SAMs on gold; they form multilayered films under identical deposition conditions.

Alkanethiols on platinum: multicomponent self-assembled monolayers.

We have studied the formation of self-assembled monolayers (SAMs) of n-alkanethiols on platinum thin films using X-ray photoelectron spectroscopy (XPS), reflection-absorption infrared spectroscopy (RAIRS), spectroscopic ellipsometry (SE), and contact angle (CA) measurements. Specifically, SAMs of 1-hexanethiol, 1-dodecanethiol, and 1-octadecanethiol were grown on polycrystalline Pt films, and the effects of Pt surface preparation, deposition conditions, and solvent treatments on the initial quality and stability of the monolayer in air were investigated. The SAMs prepared under ambient conditions on piranha-cleaned and UV/ozone-cleaned substrates were compared to monolayers formed on template-stripped Pt in an inert atmosphere. We found that alkanethiols deposited from 1 mM ethanolic solutions on piranha-cleaned Pt formed densely packed monolayers in which alkyl chains were oriented close to the surface normal. Stored in the laboratory ambient, these monolayers were unchanged over about 1 week but were largely oxidized in about 1 month. No evidence was found of molecules being weakly bound within the monolayer or having undergone C-S bond scission; however, three distinct sulfur states were observed for all samples in the XPS of the S 2p region. The lowest- and highest-binding-energy components are assigned to alkylthiolate and partially oxidized alkylthiolate species, respectively. The remaining S 2p component (approximately one-third of the sulfur layer), intermediate in binding energy between the other two components, is attributed to a chemisorbed species with a S binding configuration distinct from the majority alkylthiolate: for example, S bound to Pt bound to O, S with a different Pt coordination number, or S in an adsorbed disulfide.

Nucleobase orientation and ordering in films of single-stranded DNA on gold.

We demonstrate how the orientation and ordering of DNA bases in ultrahigh vacuum (UHV) and ambient environments can be determined using complementary spectroscopic methods. Near-edge X-ray absorption fine structure (NEXAFS) with fluorescence detection, X-ray photoelectron (XPS), and Fourier transform infrared (FTIR) spectroscopies are used to quantify the coverage, chemical composition, orientation, and ordering of thymine bases in model self-assembled monolayers of thymine homo-oligonucleotides [oligo(dT)] on gold. We find that, in monolayers of thiol-modified oligo(dT), thymine bases tend to orient parallel to the Au substrate, and this preferential orientation is significantly more pronounced in monolayers of thiolated 5-mers compared to 25-mers. We interpret this preferential orientation as a signature of significant correlations (local ordering) between individual nuleobases, which offers a way to quantify and compare nucleobase interactions in films under both ambient and UHV conditions.