A Multi-Method Approach for Impact Assessment of Some Heavy Metals on Lactuca sativa L.

Heavy metals represent a large category of pollutants. Heavy metals are the focus of researchers around the world, mainly due to their harmful effects on plants. In this paper, the influence of copper, cadmium, manganese, nickel, zinc and lead, present in soil in different concentrations (below the permissible limit, the maximum permissible concentration and a concentration higher than the maximum permissible limit) on lettuce (Lactuca sativa L.) was evaluated. For this purpose, the authors analyzed the variation of photosynthetic pigments, total polyphenols, antioxidant activity and the elemental content in the studied plants. The experimental results showed that the variation of the content of biologically active compounds, elemental content and the antioxidant activity in the plants grown in contaminated soil, compared to the control plants, depends on the type and concentration of the metal added to the soil. The biggest decrease was recorded for plants grown in soil treated with Ni I (-42.38%) for chlorophyll a, Zn II (-32.92%) for chlorophyll b, Ni I (-40.46%) for carotenoids, Pb I (-40.95%) for polyphenols and Cu III (-29.42%) for DPPH. On the other hand, the largest increase regarding the amount of biologically active compounds was registered for Mn I (88.24%) in the case of the chlorophyll a, Mn I (65.56%) for chlorophyll b, Pb I (116.03%) for carotenoids, Ni III (1351.23%) for polyphenols and Ni III (1149.35%) for DPPH.

Biosynthesis of Nanoparticles Using Plant Extracts and Essential Oils.

Plant extracts and essential oils have a wide variety of molecules with potential application in different fields such as medicine, the food industry, and cosmetics. Furthermore, these plant derivatives are widely interested in human and animal health, including potent antitumor, antifungal, anti-inflammatory, and bactericidal activity. Given this diversity, different methodologies were needed to optimize the extraction, purification, and characterization of each class of biomolecules. In addition, these plant products can still be used in the synthesis of nanomaterials to reduce the undesirable effects of conventional synthesis routes based on hazardous/toxic chemical reagents and associate the properties of nanomaterials with those present in extracts and essential oils. Vegetable oils and extracts are chemically complex, and although they are already used in the synthesis of nanomaterials, limited studies have examined which molecules are effectively acting in the synthesis and stabilization of these nanostructures. Similarly, few studies have investigated whether the molecules coating the nanomaterials derived from these extracts and essential oils would bring benefits or somehow reduce their potential activity. This synergistic effect presents a promising field to be further explored. Thus, in this review article, we conducted a comprehensive review addressing the main groups of molecules present in plant extracts and essential oils, their extraction capacity, and available methodologies for their characterization. Moreover, we highlighted the potential of these plant products in the synthesis of different metallic nanomaterials and their antimicrobial capacity. Furthermore, we correlated the extract's role in antimicrobial activity, considering the potential synergy between molecules from the plant product and the different metallic forms associated with nanomaterials.

Chemometric Optimization of Biologically Active Compounds Extraction from Grape Marc: Composition and Antimicrobial Activity.

The article focuses on the optimization of the extraction process of biologically active compounds (BAC) from grape marc-a by-product of the wine industry. The influence of temperature, specifically 30 °C, 45 °C and 65 °C, and ethanol concentration in solutions, specifically 0-96% (v/v) on the extraction yield of polyphenols, flavonoids, tannins and anthocyanins, were investigated. The composition of individual polyphenols, anthocyanins and organic acids, antioxidant activity (DPPH and ABTS) and CIELab chromatic characteristics of the grape marc extracts (GME), were characterized. The microbiostatic and microbicidal effects in direct contact of GME with pathogenic microorganisms, Bacillus subtilis, Staphylococcus aureus, Escherichia coli, Klebsiella pneumoniae, were determined in vitro. The influence of extraction parameters on the total polyphenol content (TPC), total flavonoid content (TFC), tannin content (TC), total anthocyanin content (TAC) and their interdependencies were studied using information analysis. A mathematical model was developed on cubic spline functions. The analysis of individual compounds showed the presence of a wide range of flavonoids (procyanidin B2, procyanidin B1, hyperoside and quercetin), flavones (catechin), hydroxybenzoic acid derivatives (gallic, protocatechuic, p-hydroxybenzoic acids, m-hydroxybenzoic acid, syringic acid), hydroxycinic acid derivatives and ferulic acid methyl ester. The malvidol-3-glucoside was the main anthocyanin identified in the extract. A high amount of tartaric acid was also found. GME showed significant antimicrobial activity against Gram-positive bacteria and lower activity against Gram-negative bacteria.

Efficient Extraction of Total Polyphenols from Apple and Investigation of Its SPF Properties.

The purpose of this study was to evaluate the sun protection factor (SPF) of cosmetic emulsions with the addition of hydroalcoholic apple extract. First, the total polyphenolic content, the antioxidant activity and SPF properties of the extracts obtained by sonication and refluxing were evaluated. The two extraction methods were improved using the central composite design. For cosmetic emulsion that contained a different concentration of apple extract (10-40%), a SPF value between 0.51 and 0.90 was obtained. The most efficient apple extract was obtained by reflux using 50% ethanol and a 60 min extraction time. The concentrated extract was incorporated in a cosmetic emulsion whose SPF maximum was 0.90. Accordingly, due to photoprotective properties, the apple extract can be a candidate for use in cosmetic formulations.

Content of Carotenoids, Violaxanthin and Neoxanthin in Leaves of Triticum aestivum Exposed to Persistent Environmental Pollutants.

Persistent pollutants such as pharmaceuticals, pesticides, musk fragrances, and dyes are frequently detected in different environmental compartments and negatively impact the environment and humans. Understanding the impacts of diffuse environmental pollutants on plants is still limited, especially at realistic environmental concentrations of contaminants. We studied the effects of key representatives of two major classes of environmental pollutants (nine different antibiotics and six different textile dyes) on the leaf carotenoid (violaxanthin and neoxanthin) content in wheat (Triticum aestivum L.) using different pollutant concentrations and application times. The wheat plants were watered with solutions of selected environmental pollutants in two different concentrations of 0.5 mg L-1 and 1.5 mg L-1 for one week (0.5 L) and two weeks (1 L). Both categories of pollutants selected for this study negatively influenced the content of violaxanthin and neoxanthin, whereas the textile dyes represented more severe stress to the wheat plants. The results demonstrate that chronic exposure to common diffusively spread environmental contaminants constitutes significant stress to the plants.

Antimicrobial Effects of Basil, Summer Savory and Tarragon Lyophilized Extracts in Cold Storage Sausages.

The problem of functional foods with bioactive components of natural origin is current for the food industry. Plant extracts rich in polyphenols with antioxidant and antimicrobial activity are a promising source for use in improving the quality and characteristics of fresh meat and meat products. In this context, the purpose of the present study was to evaluate the physico-chemical, microbiological, sensory properties of sausages prepared with the addition of lyophilized extract of basil, thyme or tarragon. For the beginning, the total amount of polyphenols, the antioxidant and antimicrobial activity of the extracts obtained from three spices were evaluated. In the sausages previously infected with Staphylococcus aureus and Escherichia coli it was observed that there is a much larger number of colonies of microorganisms in the control sample compared to the other samples within 24 and 48 h. Moreover, following the addition of sausage extracts, no changes were found regarding their sensory acceptability.

Effect of lipophilic sea buckthorn extract on cream cheese properties.

The aim of this study was to evaluate the physico-chemical, microbiological, sensory properties and antioxidant activity of the functional cream cheese prepared with lipophilic extracts of sea buckthorn (Hippophae rhamnoides L.). The first step of the research consisted of an evaluation of the physico-chemical characteristics and the antioxidant capacity of the sea buckthorn lipophilic extracts. The sea buckthorn extracts had a significant antioxidant capacity (67.04 ± 2.67%), a content of total carotenoids of 8.27 ± 0.01 mg L-1 and a content of total polyphenols of 1842.86 ± 1.41 mg/100 g dry vegetal material. The addition of the sea buckthorn extracts did not negatively affect the fresh cream cheese's sensory characteristics. The addition of sea buckthorn extracts to the cream cheese resulted in an increase of antiradical activity and dry matter content, a decrease in acidity and higher growth inhibitition of germs.

Evaluation of the photosynthetic parameters, emission of volatile organic compounds and ultrastructure of common green leafy vegetables after exposure to non-steroidal anti-inflammatory drugs (NSAIDs).

Understanding the effects of many essential non-steroidal anti-inflammatory drugs (NSAIDs) on plants is still limited, especially at environmentally realistic concentrations. This paper presents the influence of three of the most frequently used NSAIDs (diclofenac, ibuprofen, and naproxen) at environmentally realistic concentrations on the autochthonous green leafy vegetables: orache (Atriplex patula L.), spinach (Spinacia oleracea L.) and lettuce (Lactuca sativa L.). Our research was focused on the determination of the photosynthetic parameters, the emission rate of volatile organic compounds, and the evaluation of the ultrastructure of leaves of studied vegetables after exposure to abiotic stress induced by environmental pollutants, namely NSAIDs. The data obtained indicate a moderate reduction of foliage physiological activity as a response to the stress induced by NSAIDs to the selected green leafy vegetables. The increase of the 3-hexenal and monoterpene emission rates with increasing NSAIDs concentration could be used as a sensitive and a rapid indicator to assess the toxicity of the NSAIDs. Microscopic analysis showed that the green leafy vegetables were affected by the selected NSAIDs. In comparison to the controls, the green leafy vegetables treated with NSAIDs presented irregular growth of glandular trichomes on the surface of the adaxial side of the leaves, less stomata, cells with less cytoplasm, irregular cell walls and randomly distributed chloroplasts. Of the three NSAIDs investigated in this study, ibuprofen presented the highest influence. The results obtained in this study can be used to better estimate the impact of drugs on the environment and to improve awareness on the importance of the responsible use of drugs.

Influence of nine antibiotics on key secondary metabolites and physiological characteristics in Triticum aestivum: leaf volatiles as a promising new tool to assess toxicity.

Extensive worldwide use of antibiotics has resulted in significant diffuse pollution of antibiotics in environment, but understanding the effects of many important antibiotics on plant physiological activity is still limited, especially at realistic environmental concentrations of antibiotics. To gain insight into influences of different antibiotics on plant performance and identify the most promising traits for fast assessment of toxicity, we studied impacts of nine antibiotics (amoxicillin, ampicillin, penicillin G, ceftazidime, ceftriaxone, tetracycline, doxycycline, ciprofloxacin and erythromycin) on foliage photosynthesis, photosynthetic pigment content and emissions of secondary volatile metabolites in wheat (Triticum aestivum L. cv. "Lovrin"). The antibiotics were applied at concentrations of 0.5 mg L⁻¹ or 1.5 mg L⁻¹ either by watering for one week (0.5 L solution) or for two weeks (1 L solution) with given solution. Net assimilation rate was inhibited most strongly by ciprofloxacin and cephalosporins, but the inhibition was mainly due to reductions in stomatal conductance. Photosynthetic electron transport rate was affected by penicillins, cephalosporins and tetracyclines. Contents of photosynthetic pigments, chlorophylls and carotenoids, were most strongly reduced in treatments with tetracyclines, ciprofloxacin and erythromycin. The magnitude of plant photosynthetic and pigment responses generally increased with increasing the antibiotics' dose, but the overall effects were moderate, 10-20 percent in most cases. Emissions of the lipoxygenase pathway products (LOX, green leaf volatiles) were most sensitive indicators of antibiotic treatments. LOX emissions were increased by five to six fold in response to antibiotic treatments and the emissions were quantitatively associated with the treatment dose. Monoterpene emissions were also strongly enhanced by antibiotic treatments, but the dose dependence was weaker. These data collectively suggest that analysis of leaf volatiles can provide a novel sensitive assay to gauge the toxicity of different antibiotics.

Antioxidant, Anti-Inflammatory Effects and Ability to Stimulate Wound Healing of a Common-Plantain Extract in Alginate Gel Formulations.

Our study aimed to investigate the biological effects of a common-plantain (Plantago major L.) extract, encapsulated in alginate, on dermal human fibroblast cultures in vitro, in view of its potential use as a wound healing adjuvant therapy. Common-plantain extracts were obtained by infusion and ultrasound extraction, and their total polyphenolic content and antioxidant capacity were determined by spectrophotometry. The best extract, which was obtained by infusion, was further encapsulated in sodium alginate in two different formulations. Fourier Transform Infrared Spectroscopy (FTIR) was used to demonstrate the existing interactions in the obtained common-plantain extract in the alginate formulations. The encapsulation efficiency was evaluated based on the total polyphenol content. These alginate gel formulations were further used in vitro to determine their biocompatibility and antioxidant and anti-inflammatory effects by spectrophotometry and ELISA, as well as their ability to stimulate fibroblast migration (scratch test assay) at different time points. In addition, the collagen 1 and 3 levels were determined by Western blot analysis. The data showed that the microencapsulated plantain extract formulations induced an antioxidant, anti-inflammatory effect, enhanced collagen production and increased wound closure in the first 8 h of their application. These results are encouraging for the use of this alginate plantain extract formulation as an adjuvant for skin wound healing.

The Effect of Functionalized Multiwall Carbon Nanotubes with Fe and Mn Oxides on Lactuca sativa L.

The aim of this work was to evaluate the effect of six nanomaterials, namely CNT-COOH, CNT-MnO2, CNT-Fe3O4, CNT-MnO2-Fe3O4, MnO2, and Fe3O4 on lettuceTo determine the impact of nanomaterials on lettuce, the results obtained were compared with those for the control plant, grown in the same conditions of light, temperature, and humidity but without the addition of nanomaterial. The study found that the content of bioactive compounds and the antioxidant capacity varied in the treated plants compared to the control ones, depending on the nanomaterial. The use of CNTs functionalized with metal oxides increases the elemental concentration of lettuce leaves for the majority of the elements. On the contrary, metal oxide nanoparticles and CNT functionalized with carboxyl groups induce a decrease in the concentration of many elements. Soil amending with MnO2 affects the content of more than ten elements in leaves. Simultaneous application of CNT and MnO2 stimulates the elemental translocation of all elements from roots to leaves, but the simultaneous use of CNT and Fe3O4 leads to the most intense translocation compared to the control other than Mo.

The Effect of Aromatic Plant Extracts Encapsulated in Alginate on the Bioactivity, Textural Characteristics and Shelf Life of Yogurt.

The article investigated the antioxidant and antimicrobial activity of extracts from two aromatic plants-Satureja hortensis L. (SE) and Rosmarinus officinalis L. (RE), encapsulated in alginate, on-yogurt properties. The encapsulation efficiency was controlled by FTIR and SEM analysis. In both extracts, the individual polyphenol content was determined by HPLC-DAD-ESI-MS. The total polyphenol content and the antioxidant activity were spectrophotometrically quantified. The antimicrobial properties of SE and RE against gram-positive bacteria (Bacillus cereus, Enterococcus faecalis, Staphylococcus aureus, Geobacillus stearothermophilus), gram-negative bacteria (Escherichia coli, Acinetobacter baumannii, Salmonella abony) and yeasts (Candida albicans) were analyzed in vitro. The encapsulated extracts were used to prepare the functional concentrated yogurt. It was established that the addition of 0.30-0.45% microencapsulated plant extracts caused the inhibition of the post-fermentation process, the improvement of the textural parameters of the yogurt during storage, thus the shelf life of the yogurt increased by seven days, compared to the yogurt simple. Mutual information analysis was applied to establish the correlation between the concentration of the encapsulated extracts on the sensory, physical-chemical, and textural characteristics of the yogurt.

Synthesis and Characterization of MWCNT-COOH/Fe3O4 and CNT-COOH/Fe3O4/NiO Nanocomposites: Assessment of Adsorption and Photocatalytic Performance.

In this study the adsorption and photodegradation capabilities of modified multi-walled carbon nanotubes (MWCNTs), using tartrazine as a model pollutant, is demonstrated. MWCNT-COOH/Fe3O4 and MWCNT-COOH/Fe3O4/NiO nanocomposites were prepared by precipitation of metal oxides in the presence of MWCNTs. Their properties were examined by X-ray diffraction in powder (XRD), Fourier-transform infrared spectroscopy (FT-IR), transmission electron microscopy (TEM), scanning electron microscopy (SEM), Raman spectroscopy, synchrotron-based Scanning PhotoElectron Microscopy (SPEM), and Brunauer-Emmett-Teller (BET) analysis. It was found that the optimal adsorption conditions were pH 4 for MWCNT-COOH/Fe3O4 and pH 3 for MWCNT-COOH/Fe3O4/NiO, temperature 25 °C, adsorbent dose 1 g L-1, initial concentration of tartrazine 5 mg L-1 for MWCNT-COOH/Fe3O4 and 10 mg L-1 for MWCNT-COOH/Fe3O4/NiO and contact time 5 min for MWCNT-COOH/Fe3O4/NiO and 15 min for MWCNT-COOH/Fe3O4. Moreover, the predominant degradation process was elucidated simultaneously, with and without simulated sunlight irradiation, using thermal lens spectrometry (TLS) and UV-Vis absorption spectrophotometry. The results indicated the prevalence of the photodegradation mechanism over adsorption from the beginning of the degradation process.

Interplay between metabolic and thyroid parameters in obese pubertal children. Does visceral adipose tissue make the first move?

Objectives: The mechanisms of obesity-associated thyroid dysfunction in children are incompletely deciphered. We aimed to evaluate whether visceral adipose tissue (VAT), insulin resistance (IR), inflammation, oxidative stress (OS) are involved in thyroid morpho-functional changes in pubertal obese children. Methods: We recruited 43 obese pubertal children without history of thyroid pathology. Metabolic and thyroid parameters (visceral fat thickness [VFT], waist/hip ratio [WHR], waist/height ratio [WHtR], insulin, glucose, liver parameters, thyroid stimulation hormone [TSH], free thyroxine [FT4], free triiodothyronine [FT3], thyroid and abdominal ultrasonography) were evaluated. Serum monocyte chemoattractant protein-1 (MCP-1) and malondialdehyde (MDA) levels were quantified as markers of inflammation and OS. Results: VFT correlated positively both with WHR (p= 0.034) and the presence of thyroid nodules (p= 0.036). WHR associated with TSH (p= 0.005), FT3/FT4 (p= 0.033) and was independently associated with FT3/FT4 increase (p< 0.001). HOMA-IR increased with visceral obesity (waist circumference, p= 0.001; WHR, p= 0.018; WHtR: p< 0.001), hepatic impairment (alanine aminotransferase, p= 0.019) and hepatic steatosis (HS; p= 0.013) and correlated positively with FT3/FT4 (p= 0.036). TSH was significantly higher in subjects with HS versus those without HS (p= 0.007) and logistic regression analysis identified TSH as a risk factor for HS (p= 0.014). MDA correlated positively with MCP-1 (p= 0.021). Conclusion: VAT and IR may be responsible for changes in thyroid parameters associated with obesity: elevated TSH, FT3/FT4 levels and increased prevalence of thyroid nodules. WHR was predictive of increased FT3/FT4. In obese children, there is an interdependent relationship between HS and thyroid function.

Evaluation of CNT-COOH/MnO2/Fe3O4 nanocomposite for ibuprofen and paracetamol removal from aqueous solutions.

The nanocomposite CNT-COOH/MnO2/Fe3O4 was synthesized and characterized by different techniques, namely X-ray diffraction, Fourier-transform infrared spectroscopy, transmission electron microscopy, scanning electron microscopy, energy dispersive spectroscopy, thermogravimetric analysis, Brunauer-Emmett-Teller analysis, magnetic measurement, point of zero charge and hydrophobicity index. Analyzes revealed the groups -COOH, MnO2 and Fe3O4 attached to the carbon nanotubes, the acidic character of the obtained nanocomposite and its stability. The surface area for the obtained nanocomposite was 114.2 m2 g-1. The prepared nanocomposite was used for adsorption of ibuprofen and paracetamol from aqueous solution. Isotherm, kinetic and thermodynamic parameters were determined for predicting the ibuprofen and paracetamol adsorption on synthetized nanocomposite. The equilibrium data obtained from adsorption were well represented by Langmuir model and kinetics data were well fitted by the pseudo-second order model. The maximum adsorption capacity obtained for ibuprofen and paracetamol was 103.093 mg g-1, 80.645 mg g-1 respectively. The thermodynamic analysis showed that the adsorption process for both pollutants was spontaneous and endothermic. The synthetized nanocomposite can be a suitable new absorbent for ibuprofen and paracetamol removal from aqueous solutions due to its high adsorbing capacity and it can be separated by an external magnetic field.

The Impact Assessment of CuO Nanoparticles on the Composition and Ultrastructure of Triticum aestivum L.

In the present study, the effects of copper oxide nanoparticles (CuO NPs) on bioactive compounds, the ultrastructural modifications which can occur, and elemental content of wheat were investigated. Changes in the wheat plants grown in presence or absence of CuO NPs were estimated. The application of CuO NPs decreased the amounts of chlorophylls and carotenoids and increased the amounts of polyphenols and antioxidant capacity. Ultrastructural analysis showed that the plants treated with CuO NPs were negatively affected. Soil amending completely inhibited the accumulation of seventeen elements, while K, Br, Al, and Zn were accumulated and Cl, Na, Ba, and Sr content decreased in wheat samples, regardless of the type of NPs applied. The application of chemically obtained NPs induced the most significant changes, completely blocking the assimilation of Fe, Mo, As, Sb, and Sm, and favoring much higher accumulation of Br than biogenic NPs. The decrease in chlorophylls and carotenoids is correlated with increase in antioxidant capacity, and occurs with increase of Mo, Al, Mg, K, Zn, and Ca content. The behavior of total polyphenols is correlated with Br content, and antagonist to Al behavior. From the point of view of bioactive compounds, the most affected plants were those that grew in the presence of CuO-NP-cel, while from the point of view of elementary analysis, the most affected plants were those grown in the presence of CuO-NP. By corroborating the obtained results, it was found that the CuO NPs have a negative effect on wheat plants.

Data on the removal of Optilan Blue dye from aqueous media using starch-coated green synthesized magnetite nanoparticles.

In this data article, we present supplementary data related to the research article entitled "Starch-coated green synthesized magnetite nanoparticles for removal of textile dye Optilan Blue from aqueous media" Stan et al., 2019. Data interpretations are included in the related research article Stan et al., 2019. The synthesized starch-coated Fe3O4 nanoparticles (ST-coated Fe3O4 NPs) were analyzed by scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HRTEM) to illustrate the shape and surface coating of nanoparticles. Moreover, the Brunauer-Emmett-Teller (BET) technique was used to evidence starch deposition on magnetite nanoparticles. The obtained nanocomposites were used for adsorption of Optilan Blue (OB) in batch conditions and the optimum agitation speed and point of zero charge (pHpzc) were established. After OB adsorption on ST-coated Fe3O4 NPs, the nanocomposites were analyzed by transmission electron microscopy (TEM), X-ray diffraction (XRD) and Fourier-transform infrared spectroscopy (FTIR). The stability of starch coated Fe3O4 NPs in the acidic as well as alkaline pH was also evidenced by FTIR spectroscopy. In addition, to test the stability of ST-coated Fe3O4 NPs, leaching experiments were carried out. The experimental data were compared with isotherm and kinetic models in order to determine the most suitable for fitting.

The efficiency of the multi-walled carbon nanotubes used for antibiotics removal from wastewaters generated by animal farms.

In the recent years, residual antibiotics are considered to be emerging environmental pollutants due to their continuous input and persistence into the aquatic ecosystem even at low concentrations. Therefore, these are necessary to develop efficient methods for the wastewater treatment. The present paper describes the efficiency of several types of multi-walled carbon nanotubes (MWCNTs) for the retention of the selected antibiotics (ampicillin, ceftazidime, cefepime, imipenem, piperacillin, tazobactam, tetracycline, erythromycin, ciprofloxacin, norfloxacin, vancomycin, gentamicin, sulfamethoxazole, and thrimetoprim) from aqueous (synthetic) solutions and wastewater samples. The functionalized MWCNTs were characterized by Fourier transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and transmission electron microscopy (TEM). The obtained antibiotic percentage of retention was evaluated by quantitative assessment using high-performance liquid chromatography coupled with the diode array, fluorescence, and mass spectrometer detector (HPLC-DAD/FD/MS), after the solid-phase extraction (SPE) with Oasis HLB cartridges. The retention percentages of the selected antibiotics from waters ranged between ∼40 and 97%, with the exception of sulfamethoxazole and trimethoprim. The best percentages of retention were obtained for norfloxacin 97.03% and ciprofloxacin 97.10%. The suspensions of the MWCNTs improved the antibiotics removal from wastewaters. Removal of antibiotics from wastewaters using nanotechnology, in order to reduce their negative effects and antibiotic resistance, is a promising tool in the future wastewaters treatment.

Abundance of antibiotics, antibiotic resistance genes and bacterial community composition in wastewater effluents from different Romanian hospitals.

Antimicrobial resistance represents a growing and significant public health threat, which requires a global response to develop effective strategies and mitigate the emergence and spread of this phenomenon in clinical and environmental settings. We investigated, therefore, the occurrence and abundance of several antibiotics and antibiotic resistance genes (ARGs), as well as bacterial community composition in wastewater effluents from different hospitals located in the Cluj County, Romania. Antibiotic concentrations ranged between 3.67 and 53.05 µg L-1, and the most abundant antibiotic classes were ß-lactams, glycopeptides, and trimethoprim. Among the ARGs detected, 14 genes confer resistance to ß-lactams, aminoglycosides, chloramphenicol, macrolide-lincosamide-streptogramin B (MLSB) antibiotics, sulfonamides, and tetracyclines. Genes encoding quaternary ammonium resistance and a transposon-related element were also detected. The sulI and qacEΔ1 genes, which confer resistance to sulfonamides and quaternary ammonium, had the highest relative abundance with values ranging from 5.33 × 10-2 to 1.94 × 10-1 and 1.94 × 10-2 to 4.89 × 10-2 copies/16 rRNA gene copies, respectively. The dominant phyla detected in the hospital wastewater samples were Proteobacteria, Bacteroidetes, Firmicutes, and Actinobacteria. Among selected hospitals, one of them applied an activated sludge and chlorine disinfection process before releasing the effluent to the municipal collector. This conventional wastewater treatment showed moderate removal efficiency of the studied pollutants, with a 55-81% decrease in antibiotic concentrations, 1-3 order of magnitude lower relative abundance of ARGs, but with a slight increase of some potentially pathogenic bacteria. Given this, hospital wastewaters (raw or treated) may contribute to the spread of these emerging pollutants in the receiving environments. To the best of our knowledge, this study quantified for the first time the abundance of antibiotics and ARGs in wastewater effluents from different Romanian hospitals.

Toxic influence of key organic soil pollutants on the total flavonoid content in wheat leaves.

Textile dyes and antibiotics are two main classes of environmental pollutants which could be found in soil and water. Those persistent pollutants can have a negative influence on plant growth and development and affect the level of secondary metabolites. In the present work we studied the effect of textile dyes and antibiotics on total leaf flavonoid contents in wheat (Triticum aestivum L.). Contaminant solutions were applied daily using concentrations of 0.5 mg L-1 (lower) and 1.5 mg L-1 (higher dose) for either one or two weeks. We observed that exposure to the higher concentration of textile dyes resulted in a reduction in flavonoid content while antibiotics enhanced flavonoid contents at lower doses of exposure, and reduced at higher doses of exposure. These results suggest that diffuse chronic pollution by artificial organic contaminants can importantly alter antioxidative capacity of plants.