Novices' learning curve in single-port surgery using three surgical training programs.

BACKGROUND: The objective of this study was to evaluate the novices' learning curves and proficiency level reached in laparoendoscopic single-site (LESS) surgery using three surgical training programs. MATERIAL AND METHODS: Participants were randomly divided into three groups, who trained in a specific practice regimen for 12 days using a laparoscopic box simulator and three tasks. Group A trained in three stages using conventional laparoscopic surgery (CLS) with straight instruments, and LESS with straight and articulating instruments for four days each. Group B trained in two stages in LESS with straight and articulating instruments for six days each. Group C trained only in LESS with articulating instruments exclusively for all 12 days. Performance was registered daily during the 12 days to evaluate the participants' progress. RESULTS: Pre- and post-training analysis of the three groups showed significant differences in performance, denoting the significant improvement in their LESS skills, with no difference between the groups. Group C reached a high level of technical competence with their specific training program in LESS, obtaining a lower asymptote and slow learning rate. CONCLUSION: Specific training programs in LESS settings using articulated instruments showed a slower learning rate than the other programs but better proficiency in the technique with the best surgical performance.

Objective psychomotor laparoscopic skills evaluation using a low-cost wearable device based on accelerometry: construct and concurrent validity study.

BACKGROUND: Motion analysis of surgical maneuvers provides useful quantitative information for the objective evaluation of the surgeons. However, surgical simulation laboratories for laparoscopic training do not usually integrate devices that help quantify the level of skills of the surgeons due to their limited resources and the high costs of new technologies. The purpose of this study is to present the construct and concurrent validity of a low-cost motion tracking system, based on a wireless triaxial accelerometer, employed to objectively evaluate psychomotor skills of surgeons during laparoscopic training. METHODS: An accelerometry system, a wireless three-axis accelerometer with appearance of wristwatch, was placed on the dominant hand of the surgeons to register the motion during the laparoscopy practice with the EndoViS simulator, which simultaneously recorded the motion of the laparoscopic needle driver. This study included the participation of 30 surgeons (6 experts, 14 intermediates and 10 novices) who performed the task of intracorporeal knot-tying suture. Using 11 motion analysis parameters (MAPs), the performance of each participant was assessed. Subsequently, the scores of the three groups of surgeons were statistically analyzed. In addition, a validity study was conducted comparing the metrics between the accelerometry-tracking system and the EndoViS hybrid simulator. RESULTS: Construct validity was achieved for 8 of the 11 metrics examined with the accelerometry system. Concurrent validity demonstrated that there is a strong correlation between the results of the accelerometry system and the EndoViS simulator in 9 of 11 parameters, showing reliability of the accelerometry system as an objective evaluation method. CONCLUSION: The accelerometry system was successfully validated. This method is potentially useful to complement the objective evaluation of surgeons during laparoscopic practice in training environments such as box-trainers and simulators.

Face, content, and construct validity of the virtual immersive operating room simulator for training laparoscopic procedures.

BACKGROUND: The aim of this work is to present the face, content, and construct validation of the virtual immersive operating room simulator (VIORS) for procedural training of surgeons' laparoscopic psychomotor skills and evaluate the immersive training experience. METHODS: The VIORS simulator consists of an HMD Oculus Rift 2016 with a visor on a 1080 × 1200 pixel OLED screen, two positioning sensors with two adapted controls to simulate laparoscopic instruments, and an acrylic base to simulate the conventional laparoscopic setup. The immersion consists of a 360° virtual operating room environment, based on the EndoSuite at Hospital Infantil de Mexico Federico Gomez, which reproduces a configuration of equipment, instruments, and common distractions in the operating room during a laparoscopic cholecystectomy procedure. Forty-five surgeons, residents, and medicine students participated in this study: 27 novices, 13 intermediates, and 5 experts. They completed a questionnaire on the realism and operating room immersion, as well as their capabilities for laparoscopic procedural training, scored in the 5-point Likert scale. The data of instrument movement were recorded and analyzed using 13 movement analysis parameters (MAPs). The experience during training with VIORS was evaluated through NASA-TLX. RESULTS: The participants were enthusiastic about the immersion and sensation levels of the VIORS simulator, with positive scores on the realism and its capabilities for procedural training using VIORS. The results proved that the VIORS simulator was able to differentiate between surgeons with different skill levels. Statistically significant differences were found in nine MAPs, demonstrating their construct validity for the objective assessment of the procedural laparoscopic performance. At cognitive level, the inversion experience proves a moderate mental workload when the laparoscopic procedure is carried out. CONCLUSION: The VIORS simulator has been successfully presented and validated. The VIORS simulator is a useful and effective device for the training of procedural laparoscopic psychomotor skills.

Steerable Surgical Instrument for Conventional and Single-Site Minimally Invasive Surgery.

Background. This article aims to present an innovative design of a steerable surgical instrument for conventional and single-site minimally invasive surgery (MIS), which improves the dexterity and maneuverability of the surgeon while offering a solution to the limitations of current tools. Methods. The steerable MIS instrument consists of a deflection structure with a curved sliding joints design that articulates the distal tip in two additional degrees of freedom (DoFs), relative to the instrument shaft, using transmission by cables. A passive ball-joint mechanism articulates the handle relative to the instrument shaft, improves wrist posture, and prevents collision of instrument handles during single-site MIS procedures. The two additional DoFs of the articulating tip are activated by a thumb-controlled device, using a joystick design mounted on the handle. This steerable MIS instrument was developed by additive manufacturing in a 3D printer using PLA polymer. Results. Prototype testing showed a maximum tip deflection of 60° in the left and right directions, with a total deflection of 120°. With the passive ball-joint fully offset, the steerable tip achieved a deflection of 90° for the right and 40° for the left direction, with a total deflection of 130°. Furthermore, the passive ball-joint mechanism in the handle obtained a maximum range of motion of 60°. Conclusions. This steerable MIS instrument concept offers an alternative to enhance the application fields of conventional and single-site MIS, increasing manual dexterity of the surgeon and the ability to reach narrow anatomies from other directions.

Construct validity of the SurgForce system for objective assessment of laparoscopic suturing skills.

BACKGROUND: Laparoscopic surgery requires a new set of skill to be learned by the surgeons, of which the most relevant is tissue manipulation. Excessive forces applied to the tissue can cause rupture during manipulation or ischemia when confronting both sides of the tissue. The aim of this study is to establish the construct validity of the SurgForce system for objective assessment of advanced laparoscopic skills, based on the force signal generated during suture tasks, and the development of force parameters for evaluating tissue handling interaction. METHODS: The SurgForce system, a tissue handling training device that measures dynamic force, was used to capture the force generated by surgeons with different levels of laparoscopic experience. For construct validity, 37 participants were enrolled in this study: 19 medical students, 12 residents of surgical specialties and 6 expert surgeons. All participants performed an intracorporeal knotting suture task over a synthetic tissue pad with a laparoscopic box-trainer. The force performance of the participants was analyzed using 11 force-based parameters with the application of the SurgForce system. Statistical analysis was performed between novice, intermediate, and expert groups using a Kruskal-Wallis test, and between the pairs of groups using a Mann-Whitney U-test. RESULTS: Overall, 9 of the 11 force-related parameters showed significant differences between the three study groups. Results between the pairs of groups presented significant differences in 5 force parameters proposed. Construct validity results demonstrated that the SurgForce system was able to differentiate force performance between surgeons with different levels of laparoscopic experience. CONCLUSION: The SurgForce system was successfully validated. This force system showed its potential to measure the force exerted on tissue for objective assessment of tissue handling skills in suturing tasks. Furthermore, its compact design allows the use of this device in conventional laparoscopic box-trainers.

Design of a Dynamic Force Measurement System for Training and Evaluation of Suture Surgical Skills.

The aim of this study is to present the SurgeForce system, a tissue handling training device for analysis of dynamic force applied to the tissue and objective assessment of basic surgical skills during the suture process. The SurgeForce system consists of a mechanical base formed by two platforms joint with three stainless steel springs and a three axial digital accelerometer attached to the upper platform, which detects the dynamic force caused by a surgeon when performing a suture task over a synthetic tissue pad. Accelerometer data is sent to a control unit where preprocessing to transform the raw data into a force signal is done, and then, the force signal is sent to a computer application, which register the force exerted over the synthetic tissue pad. For validation, 17 participants (6 surgeons and 11 medical students) performed three simple interrupted sutures with knot tying using the SurgeForce system. Ten force-based metrics were proposed to evaluate their performance during the suturing task. Results of the validation showed statistical differences in 8 of 10 force-based parameters for assessment of basic surgical skills during the suture task. The SurgeForce system demonstrated its capacity to differentiate force-based performance of surgeons and medical students. The SurgeForce system has been successfully validated. This system was able to distinguish force performance between experts and novices, showing its potential to distinguish surgeons with basic suture skills from those who are not yet prepared.

Varicocelectomía laparoscópica en varicocele recidivante / Laparoscopic varicocelectomy in recurrent varicocele

Introducción. La cirugía laparoscópica, procedimiento quirúrgico menos invasivo que la cirugía abdominal abierta, ha sido utilizada para el diagnóstico y tratamiento de múltiples enfermedades. Se ha reportado varicocelectomía laparoscópica en adultos con éxito. Caso clínico. Se presenta el caso de un paciente de 21 años de edad con varicocele izquierdo grado III recidivante, operado en 2 ocaciones (a los 16 y 17 años) de varicocelectomía por vía inguinal quien presenta nueva recidiva manejada en esta ocasión por vía laparoscópica, con buen resultado. Conclusión. La varicocelectomía laparoscópica es una buena alternativa de manejo en casos de recidiva después de operación inguinal

Esofagomiotomía laparoscópica asistida por panendoscopia para el tratamiento definitivo de la acalasia en niños / Laparoscopic esophagomyotomy assisted with endoscopy in the treatment of achalasia in children

Introducción. La acalasia es un trastorno motor del esófago poco frecuente en niños con lesiones neuromusculares reconocidas. La esofagomiotomía con la realización de un mecanismo antirreflujo concomitante es el método terapéutico de elección en los pacientes pediátricos. Casos clínicos. Se reportan 2 casos de pacientes pediátricos con diagnóstico de acalasia manejados por laparoscopia en el Hospital Infantil de México Federico Gómez con excelentes resultados. Realizándoseles esofagomiotomía a través de 4 trocares, asistida con penendoscopia para la localización exacta de la unión esofagogástrica, efectuándose una miotomía eficaz y segura al verificar la integridad de la mucosa. Actualmente ambos casos cursaron asintomáticos, observándose recuperación después de 6 y 9 meses de seguimiento. Conclusión. La cirugía de mínima invasión adquiere día con día mayor aceptación en el tratamiento definitivo de la acalasia por sus grandes ventajas. El auxilio con endoscopia facilita la técnica y aumento la seguridad en manos experimentadas