Integrated particle image velocimetry and fluid-structure interaction analysis for patient-specific abdominal aortic aneurysm studies.

BACKGROUND: Understanding the hemodynamics of an abdominal aortic aneurysm (AAA) is crucial for risk assessment and treatment planning. This study introduces a low-cost, patient-specific in vitro AAA model to investigate hemodynamics using particle image velocimetry (PIV) and flow-simulating circuit, validated through fluid-structure interaction (FSI) simulations. METHODS: In this study, 3D printing was employed to manufacture a flexible patient-specific AAA phantom using a lost-core casting technique. A pulsatile flow circuit was constructed using off-the-shelf components. A particle image velocimetry (PIV) setup was built using an affordable laser source and global shutter camera, and finally, the flow field inside the AAA was analyzed using open-source software. Fluid-structure interaction (FSI) simulations were performed to enhance our understanding of the flow field, and the results were validated by PIV analysis. Both steady-state and transient flow conditions were investigated. RESULTS: Our experimental setup replicated physiological conditions, analyzing arterial wall deformations and flow characteristics within the aneurysm. Under constant flow, peak wall deformations and flow velocities showed deviations within - 12% to + 27% and - 7% to + 5%, respectively, compared to FSI simulations. Pulsatile flow conditions further demonstrated a strong correlation (Pearson coefficient 0.85) in flow velocities and vectors throughout the cardiac cycle. Transient phenomena, particularly the formation and progression of vortex structures during systole, were consistently depicted between experimental and numerical models. CONCLUSIONS: By bridging high-fidelity experimental observations with comprehensive computational analyses, this study underscores the potential of integrated methodologies in enhancing our understanding of AAA pathophysiology. The convergence of realistic AAA phantoms, precise PIV measurements at affordable cost point, and validated FSI models heralds a new paradigm in vascular research, with significant implications for personalized medicine and bioengineering innovations.

A Workflow for Ensuring DICOM Compatibility During Radiography Device Software Development.

In medical devices, nonconformance with Digital Imaging and Communications in Medicine (DICOM) standard is a serious risk. DICOM nonconformance radiology devices could cause undetected image loss, increasing examination time, and costs in health centers and could even result in the wrong patient treatment. However, there is a rich literature on medical standards that identify the best practices for producing safe and effective medical software. However, these standards do not expressly provide tools to deal with all the relevant DICOM compatibility issues in a specific case. This study aims to introduce a systematic software development workflow that complies with medical standards and ensures DICOM conformance of a new or upgraded radiology software project. In this approach, DICOM conformance gets the highest priority, and the whole software project is organized around it. Software requirement analysis, risk evaluation, and test management tasks are arranged systematically to make the final device DICOM conformant. This conceptual framework was developed during the R&D work towards a novel radiography device, and it could be employed as a roadmap in other medical imaging software projects. The proposed methodology controls the DICOM compatibility risk of the final software, and its systematic evaluation complied with medical standards.

iBEX: Modular Open-Source Software for Digital Radiography.

A device-independent software package, named iBEX, is developed to accelerate the research and development efforts for X-ray imaging setups such as chest radiography, linear and multidirectional tomography, and dental and skeletal radiography. Its extension mechanism makes the software adaptable for a wide range of digital X-ray imaging hardware combinations and provides capabilities for researchers to develop image processing plug-ins. Independent of the X-ray sensor technology, iBEX could integrate with heterogeneous communication channels of digital detectors. iBEX is a freeware option for preclinical and early clinical testing of radiography devices. It provides tools to calibrate the device, integrate to health information infrastructure, acquire image, store studies on local storage, and send them to Picture Archiving and Communication System (PACS). iBEX is a unique open-source project bringing X-ray imaging devices' software into the scope of the open-source community to reduce the X-ray scanners' research effort, potentially increase the image quality, and cut down the production and testing costs of radiography devices.

Integration of arterial spin labeling into stereotactic radiosurgery planning of cerebral arteriovenous malformations.

PURPOSE: To test whether the combined use of 4D arterial spin labeling angiography (4D ASL) and contrast-enhanced magnetic resonance angiography (4D CE-MRA) can work as a prospective alternative to digital subtraction angiography (DSA) for the delineation of the arteriovenous malformation (AVM) nidus in stereotactic radiosurgery (SRS) planning. MATERIALS AND METHODS: A custom 4D ASL sequence and a proof-of-concept software tool to integrate 4D ASL data to SRS planning were implemented. Ten AVM patients were scanned at 3T. Two observers independently contoured niduses in two separate sessions. Reference niduses were contoured using DSA, 4D ASL, and 4D CE-MRA. Test niduses were contoured using 4D ASL and 4D CE-MRA only. Reference and test niduses from both observers were compared in terms of volume, distance between centers of volumes (dCOV), and the Jaccard index (JI). RESULTS: In volume comparisons, excellent intraobserver and interobserver agreements were obtained (intraclass correlation coefficients: 0.99 and 0.98, respectively). Median dCOV, JIs between reference and test niduses were 0.55 mm, 0.78 for Observer 1 and were 0.6 mm, 0.78 for Observer 2. None of the dCOV and JI parameters varied significantly among the delineation methods or the observers (P = 0.84, P = 0.39). CONCLUSION: Our preliminary results indicate that reproducibility of the target volumes with high agreement levels is achievable without using DSA. The combined use of high temporal resolution 4D ASL and high spatial resolution and vessel-to-background contrast 4D CE-MRA provided sufficient spatiotemporal angiographic information for the delineation of AVM niduses. LEVEL OF EVIDENCE: 2 Technical Efficacy: Stage 3 J. Magn. Reson. Imaging 2017;46:1718-1727.

Identification of fluocinolone acetonide to prevent paclitaxel-induced peripheral neuropathy.

Paclitaxel (PTX) is among the most commonly used cancer drugs that cause chemotherapy-induced peripheral neuropathy (CIPN), a debilitating and serious dose-limiting side effect. Currently, no drugs exist to prevent CIPN, and symptomatic therapy is often ineffective. In order to identify therapeutic candidates to prevent axonal degeneration induced by PTX, we carried out a phenotypic drug screening using primary rodent dorsal root ganglion sensory neurons. We identified fluocinolone acetonide as a neuroprotective compound and verified it through secondary screens. Furthermore, we showed its efficacy in a mouse model of PTX-induced peripheral neuropathy and confirmed with four different cancer cell lines that fluocinolone acetonide does not interfere with PTX's antitumor activity. Our study identifies fluocinolone acetonide as a potential therapy to prevent CIPN caused by PTX.

Bayesian network prior: network analysis of biological data using external knowledge.

MOTIVATION: Reverse engineering GI networks from experimental data is a challenging task due to the complex nature of the networks and the noise inherent in the data. One way to overcome these hurdles would be incorporating the vast amounts of external biological knowledge when building interaction networks. We propose a framework where GI networks are learned from experimental data using Bayesian networks (BNs) and the incorporation of external knowledge is also done via a BN that we call Bayesian Network Prior (BNP). BNP depicts the relation between various evidence types that contribute to the event 'gene interaction' and is used to calculate the probability of a candidate graph (G) in the structure learning process. RESULTS: Our simulation results on synthetic, simulated and real biological data show that the proposed approach can identify the underlying interaction network with high accuracy even when the prior information is distorted and outperforms existing methods. AVAILABILITY: Accompanying BNP software package is freely available for academic use at http://bioe.bilgi.edu.tr/BNP. CONTACT: hasan.otu@bilgi.edu.tr SUPPLEMENTARY INFORMATION: Supplementary data are available at Bioinformatics online.

Magnetic resonance imaging assessment of mechanical interactions between human lower leg muscles in vivo.

Evidence on epimuscular myofascial force transmission (EMFT) was shown for undissected muscle in situ. We hypothesize that global length changes of gastrocnemius muscle-tendon complex in vivo will cause sizable and heterogeneous local strains within all muscles of the human lower leg. Our goal is to test this hypothesis. A method was developed and validated using high-resolution 3D magnetic resonance image sets and Demons nonrigid registration algorithm for performing large deformation analyses. Calculation of strain tensors per voxel in human muscles in vivo allowed quantifying local heterogeneous tissue deformations and volume changes. After hip and knee movement (Δ knee angle ≈ 25 deg) but without any ankle movement, local lengthening within m. gastrocnemius was shown to occur simultaneously with local shortening (maximally by +34.2% and -32.6%, respectively) at different locations. Moreover, similar local strains occur also within other muscles, despite being kept at constant muscle-tendon complex length. This is shown for synergistic m. soleus and deep flexors, as well as for antagonistic anterior crural and peroneal muscle groups: minimum peak lengthening and shortening equaled 23.3% and 25.54%, respectively despite global isometric conditions. These findings confirm our hypothesis and show that in vivo, muscles are in principle not independent mechanically.

Pathway analysis of high-throughput biological data within a Bayesian network framework.

MOTIVATION: Most current approaches to high-throughput biological data (HTBD) analysis either perform individual gene/protein analysis or, gene/protein set enrichment analysis for a list of biologically relevant molecules. Bayesian Networks (BNs) capture linear and non-linear interactions, handle stochastic events accounting for noise, and focus on local interactions, which can be related to causal inference. Here, we describe for the first time an algorithm that models biological pathways as BNs and identifies pathways that best explain given HTBD by scoring fitness of each network. RESULTS: Proposed method takes into account the connectivity and relatedness between nodes of the pathway through factoring pathway topology in its model. Our simulations using synthetic data demonstrated robustness of our approach. We tested proposed method, Bayesian Pathway Analysis (BPA), on human microarray data regarding renal cell carcinoma (RCC) and compared our results with gene set enrichment analysis. BPA was able to find broader and more specific pathways related to RCC. AVAILABILITY: Accompanying BPA software (BPAS) package is freely available for academic use at http://bumil.boun.edu.tr/bpa.

MRI active guidewire with an embedded temperature probe and providing a distinct tip signal to enhance clinical safety.

BACKGROUND: The field of interventional cardiovascular MRI is hampered by the unavailability of active guidewires that are both safe and conspicuous. Heating of conductive guidewires is difficult to predict in vivo and disruptive to measure using external probes. We describe a clinical-grade 0.035" (0.89 mm) guidewire for MRI right and left heart catheterization at 1.5 T that has an internal probe to monitor temperature in real-time, and that has both tip and shaft visibility as well as suitable flexibility. METHODS: The design has an internal fiberoptic temperature probe, as well as a distal solenoid to enhance tip visibility on a loopless antenna. We tested different tip-solenoid configurations to balance heating and signal profiles. We tested mechanical performance in vitro and in vivo in comparison with a popular clinical nitinol guidewire. RESULTS: The solenoid displaced the point of maximal heating ("hot spot") from the tip to a more proximal location where it can be measured without impairing guidewire flexion. Probe pullback allowed creation of lengthwise guidewire temperature maps that allowed rapid evaluation of design prototypes. Distal-only solenoid attachment offered the best compromise between tip visibility and heating among design candidates. When fixed at the hot spot, the internal probe consistently reflected the maximum temperature compared external probes.Real-time temperature monitoring was performed during porcine left heart catheterization. Heating was negligible using normal operating parameters (flip angle, 45°; SAR, 1.01 W/kg); the temperature increased by 4.2°C only during high RF power mode (flip angle, 90°; SAR, 3.96 W/kg) and only when the guidewire was isolated from blood cooling effects by an introducer sheath. The tip flexibility and in vivo performance of the final guidewire design were similar to a popular commercial guidewire. CONCLUSIONS: We integrated a fiberoptic temperature probe inside a 0.035" MRI guidewire. Real-time monitoring helps detect deleterious heating during use, without impairing mechanical guidewire operation, and without impairing MRI visibility. We therefore need not rely on prediction to ensure safe clinical operation. Future implementations may modulate specific absorption rate (SAR) based on temperature feedback.

Effects of knee joint angle on global and local strains within human triceps surae muscle: MRI analysis indicating in vivo myofascial force transmission between synergistic muscles.

PURPOSE: Mechanical interactions between muscles have been shown for in situ conditions. In vivo data for humans is unavailable. Global and local length changes of calf muscles were studied to test the hypothesis that local strains may occur also within muscle for which global strain equals zero. METHODS: For determination of globally induced strain in m. gastrocnemius in dissected human cadavers several knee joint angles were imposed, while keeping ankle joint angle constant and measuring its muscle-tendon complex length changes. In vivo local strains in both gastrocnemius and soleus muscles were calculated using MRI techniques in healthy human volunteers comparing images taken at static knee angles of 173° and 150°. RESULTS: Imposed global strains on gastrocnemius were much smaller than local strains. High distributions of strains were encountered, e.g. overall lengthened muscle contains locally lengthened, as well as shortened areas within it. Substantial strains were not limited to gastrocnemius, but were found also in synergistic soleus muscle, despite the latter muscle-tendon complex length remaining isometric (constant ankle angle: i.e. global strain = 0), as it does not cross the knee. Based on results of animal experiments this effect is ascribed to myofascial connections between these synergistic muscles. The most likely pathway is the neurovascular tract within the anterior crural compartment (i.e. the collagen reinforcements of blood vessels, lymphatics and nerves). However, direct intermuscular transmission of force may also occur via the perimysium shared between the two muscles. CONCLUSIONS: Global strains imposed on muscle (joint movement) are not good estimators of in vivo local strains within it: differing in magnitude, as well as direction of length change. Substantial mechanical interaction occurs between calf muscles, which is mediated by myofascial force transmission between these synergistic muscles. This confirms conclusions of previous in situ studies in experimental animals and human patients, for in vivo conditions in healthy human subjects.

RT-GROG: parallelized self-calibrating GROG for real-time MRI.

A real-time implementation of self-calibrating Generalized Autocalibrating Partially Parallel Acquisitions (GRAPPA) operator gridding for radial acquisitions is presented. Self-calibrating GRAPPA operator gridding is a parallel-imaging-based, parameter-free gridding algorithm, where coil sensitivity profiles are used to calculate gridding weights. Self-calibrating GRAPPA operator gridding's weight-set calculation and image reconstruction steps are decoupled into two distinct processes, implemented in C++ and parallelized. This decoupling allows the weights to be updated adaptively in the background while image reconstruction threads use the most recent gridding weights to grid and reconstruct images. All possible combinations of two-dimensional gridding weights G(x)(m)G(y)(n) are evaluated for m,n = {-0.5, -0.4, ..., 0, 0.1, ..., 0.5} and stored in a look-up table. Consequently, the per-sample two-dimensional weights calculation during gridding is eliminated from the reconstruction process and replaced by a simple look-up table access. In practice, up to 34x faster reconstruction than conventional (parallelized) self-calibrating GRAPPA operator gridding is achieved. On a 32-coil dataset of size 128 x 64, reconstruction performance is 14.5 frames per second (fps), while the data acquisition is 6.6 fps.

Interventional MRI using multiple 3D angiography roadmaps with real-time imaging.

PURPOSE: To enhance real-time magnetic resonance (MR)-guided catheter navigation by overlaying colorized multiphase MR angiography (MRA) and cholangiopancreatography (MRCP) roadmaps in an anatomic context. MATERIALS AND METHODS: Time-resolved MRA and respiratory-gated MRCP were acquired prior to real-time imaging in a pig model. MRA and MRCP data were loaded into a custom real-time MRI reconstruction and visualization workstation where they were displayed as maximum intensity projections (MIPs) in distinct colors. The MIPs were rendered in 3D together with real-time multislice imaging data using alpha blending. Interactive rotation allowed different views of the combined data. RESULTS: Fused display of the previously acquired MIP angiography data with real-time imaging added anatomical context during endovascular interventions in swine. The use of multiple MIPs rendered in different colors facilitated differentiation of vascular structures, improving visual feedback during device navigation. CONCLUSION: Interventional real-time MRI may be enhanced by combining with previously acquired multiphase angiograms. Rendered as 3D MIPs together with 2D slice data, this technique provided useful anatomical context that enhanced MRI-guided interventional applications.

Unified Open Hardware Platform for Digital X-Ray Devices; its Conceptual Model and First Implementation.

BACKGROUND: Digital radiography devices are still the gold standard for diagnosis or therapy guidance in medicine. Despite the similarities between all direct digital x-ray systems, researchers and new companies face significant challenges during the development phase of innovative x-ray devices; each component is manufactured independently, guidance towards device integration from manufacturers is limited, global standards for device integration is lacking. METHOD: In scope of this study a plug-integrate-play (PIP) conceptual model for x-ray imaging system is introduced and implemented as an open hardware platform, SyncBox. The researchers are free to select each individual device component from different vendors based on their intended application and target performance are utilized in criteria. RESULT: As its first implementation, SyncBox and its platform a full body high resolution radiographic scanner that employs a novel TDI digital detector. CONCLUSION: We believe that SyncBox has a potential for introducing an open source hardware platform to x-ray equipment design.

Whole shaft visibility and mechanical performance for active MR catheters using copper-nitinol braided polymer tubes.

BACKGROUND: Catheter visualization and tracking remains a challenge in interventional MR.Active guidewires can be made conspicuous in "profile" along their whole shaft exploiting metallic core wire and hypotube components that are intrinsic to their mechanical performance. Polymer-based catheters, on the other hand, offer no conductive medium to carry radio frequency waves. We developed a new "active" catheter design for interventional MR with mechanical performance resembling braided X-ray devices. Our 75 cm long hybrid catheter shaft incorporates a wire lattice in a polymer matrix, and contains three distal loop coils in a flexible and torquable 7Fr device. We explored the impact of braid material designs on radiofrequency and mechanical performance. RESULTS: The incorporation of copper wire into in a superelastic nitinol braided loopless antenna allowed good visualization of the whole shaft (70 cm) in vitro and in vivo in swine during real-time MR with 1.5 T scanner. Additional distal tip coils enhanced tip visibility. Increasing the copper:nitinol ratio in braiding configurations improved flexibility at the expense of torquability. We found a 16-wire braid of 1:1 copper:nitinol to have the optimum balance of mechanical (trackability, flexibility, torquability) and antenna (signal attenuation) properties. With this configuration, the temperature increase remained less than 2 degrees C during real-time MR within 10 cm horizontal from the isocenter. The design was conspicuous in vitro and in vivo. CONCLUSION: We have engineered a new loopless antenna configuration that imparts interventional MR catheters with satisfactory mechanical and imaging characteristics. This compact loopless antenna design can be generalized to visualize the whole shaft of any general-purpose polymer catheter to perform safe interventional procedures.

Changes in BOLD transients with visual stimuli across 1-44 Hz.

The dependency of positive BOLD (PBOLD) and post-stimulus undershoot (PSU) on the temporal frequency of visual stimulation was investigated using stimulation frequencies between 1 and 44 Hz. The PBOLD peak at 8 Hz in primary visual cortex was in line with previous neuroimaging studies. In addition to the 8 Hz peak, secondary peaks were observed for stimulation frequencies at 16 and 24 Hz. These additional local peaks were contrary to earlier fMRI studies which reported either a decrease or a plateau for frequencies above 8 Hz but in line with electrophysiological results obtained in animal local field potential (LFP) measurements and human steady-state visual evoked potential (SSVEP) recordings. Our results also indicate that the dependency of PSU amplitude on stimulus frequency deviates from that of PBOLD. Although their amplitudes were correlated within the 1-13 Hz range, they changed independently at stimulation frequencies between 13 and 44 Hz. The different dependency profiles of PBOLD and PSU to stimulation frequency points to different underlying neurovascular mechanisms responsible for the generation of these BOLD transients with regard to their relation to inhibitory and excitatory neuronal activity.

A practical global distortion correction method for an image intensifier based x-ray fluoroscopy system.

X-ray images acquired on systems with image intensifiers (II) exhibit characteristic distortion which is due to both external and internal factors. The distortion is dependent on the orientation of the II, a fact particularly relevant to II's mounted on C arms which have several degrees of freedom of motion. Previous descriptions of distortion correction strategies have relied on a dense sampling of the C-arm orientation space, and as such have been limited mostly to a single arc of the primary angle, alpha. We present a new method which smooths the trajectories of the segmented vertices of the grid phantom as a function of a prior to solving the two-dimensional warping problem. It also shows that the same residual errors of distortion correction could be achieved without fitting the trajectories of the grid vertices, but instead applying the previously described global method of distortion correction, followed by directly smoothing the values of the polynomial coefficients as functions of the C-arm orientation parameters. When this technique was applied to a series of test images at arbitrary alpha, the root-mean-square (RMS) residual error was 0.22 pixels. The new method was extended to three degrees of freedom of the C-arm motion: the primary angle, alpha; the secondary angle, beta; and the source-to-intensifier distance, lambda. Only 75 images were used to characterize the distortion for the following ranges: alpha, +/- 45 degrees (Deltaalpha = 22.5 degrees); beta, +/- 36 degrees (Deltabeta = 18 degrees); lambda, 98-118 cm (Deltalambda = 10 cm). When evaluated on a series of test images acquired at arbitrary (alpha, beta, lambda), the RMS residual error was 0.33 pixels. This method is targeted at applications such as guidance of catheter-based interventions and treatment planning for brachytherapy, which require distortion-corrected images over a large range of C-arm orientations.

Real-time MR imaging-guided laser atrial septal puncture in swine.

PURPOSE: The authors performed this study to report their initial preclinical experience with real-time magnetic resonance (MR) imaging-guided atrial septal puncture by using a MR imaging-conspicuous blunt laser catheter that perforates only when energized. MATERIALS AND METHODS: The authors customized a 0.9-mm clinical excimer laser catheter with a receiver coil to impart MR imaging visibility at 1.5 T. Seven swine underwent laser transseptal puncture under real-time MR imaging. MR imaging signal-to-noise ratio profiles of the device were obtained in vitro. Tissue traversal force was tested with a calibrated meter. Position was corroborated with pressure measurements, oximetry, angiography, and necropsy. Intentional non-target perforation simulated serious complication. RESULTS: Embedded MR imaging antennae accurately reflected the position of the laser catheter tip and profile in vitro and in vivo. Despite having an increased profile from the microcoil, the 0.9-mm laser catheter traversed in vitro targets with similar force (0.22 N +/- 0.03) compared with the unmodified laser. Laser puncture of the atrial septum was successful and accurate in all animals. The laser was activated an average of 3.8 seconds +/- 0.4 before traversal. There were no sequelae after 6 hours of observation. Necropsy revealed 0.9-mm holes in the fossa ovalis in all animals. Intentional perforation of the aorta and atrial free wall was evident immediately. CONCLUSIONS: MR imaging-guided laser puncture of the interatrial septum is feasible in swine and offers controlled delivery of perforation energy by using an otherwise blunt catheter. Instantaneous soft tissue imaging provides immediate feedback on safety.

X-ray fused with magnetic resonance imaging (XFM) to target endomyocardial injections: validation in a swine model of myocardial infarction.

BACKGROUND: Magnetic resonance imaging (MRI) permits 3-dimensional (3D) cardiac imaging with high soft tissue contrast. X-ray fluoroscopy provides high-resolution, 2-dimensional (2D) projection imaging. We have developed real-time x-ray fused with MRI (XFM) to guide invasive procedures that combines the best features of both imaging modalities. We tested the accuracy of XFM using external fiducial markers to guide endomyocardial cell injections in infarcted swine hearts. METHODS AND RESULTS: Endomyocardial injections of iron-labeled mesenchymal stromal cells admixed with tissue dye were performed in previously infarcted hearts of 12 Yucatan miniswine (weight, 33 to 67 kg). Features from cardiac MRI were displayed combined with x-ray in real time to guide injections. During 130 injections, operators were provided with 3D surfaces of endocardium, epicardium, myocardial wall thickness (range, 2.6 to 17.7 mm), and infarct registered with live x-ray images to facilitate device navigation and choice of injection location. XFM-guided injections were compared with postinjection MRI and with necropsy specimens obtained 24 hours later. Visual inspection of the pattern of dye staining on 2,3,5-triphenyltetrazolium chloride-stained heart slices agreed (kappa=0.69) with XFM-derived injection locations mapped onto delayed hyperenhancement MRI and the susceptibility artifacts seen on the postinjection T2*-weighted gradient echo MRI. The distance between the predicted and actual injection locations in vivo was 3.2+/-2.6 mm (n=64), and 75% of injections were within 4.1 mm of the predicted location. CONCLUSIONS: Three-dimensional to two-dimensional registration of x-ray and MR images with the use of external fiducial markers accurately targets endomyocardial injection in a swine model of myocardial infarction.

Real-time magnetic resonance imaging-guided endovascular recanalization of chronic total arterial occlusion in a swine model.

BACKGROUND: Endovascular recanalization (guidewire traversal) of peripheral artery chronic total occlusion (CTO) can be challenging. X-ray angiography resolves CTO poorly. Virtually "blind" device advancement during x-ray-guided interventions can lead to procedure failure, perforation, and hemorrhage. Alternatively, MRI may delineate the artery within the occluded segment to enhance procedural safety and success. We hypothesized that real-time MRI (rtMRI)-guided CTO recanalization can be accomplished in an animal model. METHODS AND RESULTS: Carotid artery CTO was created by balloon injury in 19 lipid-overfed swine. After 6 to 8 weeks, 2 underwent direct necropsy analysis for histology, 3 underwent primary x-ray-guided CTO recanalization attempts, and the remaining 14 underwent rtMRI-guided recanalization attempts in a 1.5-T interventional MRI system. Real-time MRI intervention used custom CTO catheters and guidewires that incorporated MRI receiver antennae to enhance device visibility. The mean length of the occluded segments was 13.3+/-1.6 cm. The rtMRI-guided CTO recanalization was successful in 11 of 14 swine and in only 1 of 3 swine with the use of x-ray alone. After unsuccessful rtMRI (n=3), x-ray-guided attempts were also unsuccessful. CONCLUSIONS: Recanalization of long CTO is entirely feasible with the use of rtMRI guidance. Low-profile clinical-grade devices will be required to translate this experience to humans.

Magnetic resonance and diffusion tensor imaging analyses indicate heterogeneous strains along human medial gastrocnemius fascicles caused by submaximal plantar-flexion activity.

Sarcomere length changes are central to force production and excursion of skeletal muscle. Previous modeling indicates non-uniformity of that if mechanical interaction of muscle with its surrounding muscular and connective tissues is taken into account. Hence, quantifying length changes along the fascicles of activated human muscle in vivo is crucial, but this is lacking due to technical complexities. Combining magnetic resonance imaging deformation analyses and diffusion tensor imaging tractography, the aim was to test the hypothesis that submaximal plantar flexion activity at 15% MVC causes heterogeneous length changes along the fascicles of human medial gastrocnemius (GM) muscle. A general fascicle strain distribution pattern shown for all subjects indicates that proximal track segments are shortened, whereas distal ones are lengthened (e.g., by 13% and 29%, respectively). Mean fiber direction strains of different tracts also shows heterogeneity (for up to 57.5% of the fascicles). Inter-subject variability of amplitude and distribution of fascicle strains is notable. These findings confirm the hypothesis and are solid indicators for the functionally dependent mechanics of human muscle, in vivo. Heterogeneity of fascicle strains can be explained by epimuscular myofascial force transmission. To the best of our knowledge, this is the first study, which quantified local deformations along human skeletal muscle fascicles caused by sustained submaximal activation. The present approach and indicated fascicle strain heterogeneity has numerous implications for muscle function in health and disease to estimate the muscle's contribution to the joint moment and excursion and to evaluate mechanisms of muscle injury and several treatment techniques.