Development of Multilayer Transducer and Omnidirectional Reflection Model for Active Reflection Control.

Underwater detection is accomplished using an underwater ultrasonic sensor, sound navigation and ranging (SONAR). Stealth to avoid detection by SONAR plays a major role in modern underwater warfare. In this study, we propose a smart skin that avoids detection by SONAR via controlling the signal reflected from an unmanned underwater vehicle (UUV). The smart skin is a multilayer transducer composed of an acoustic window, a double-layer receiver, and a single-layer transmitter. It separates the incident signal from the reflected signal from outside through the time-delay separation method and cancels the reflected wave from the phase-shifted transmission sound. The characteristics of the receiving and transmitting sensors were analyzed using a finite element analysis. Three types of devices were compared in the design of the sensors. Polyvinylidene fluoride (PVDF), which had little effect on the transmitted sound, was selected as the receiving sensor. A stacked piezoelectric transducer with high sensitivity compared to a cymbal transducer was used as the transmitter. The active reflection control system was modeled and verified using 2D 360° reflection experiments. The stealth effect that could be achieved by applying a smart skin to a UUV was presented through an active reflection-control omnidirectional reflection model.

Forward-Looking Ultrasound Wearable Scanner System for Estimation of Urinary Bladder Volume.

Accurate measurement of bladder volume is an important tool for evaluating bladder function. In this study, we propose a wearable bladder scanner system that can continuously measure bladder volume in daily life for urinary patients who need urodynamic studies. The system consisted of a 2-D array, which included integrated forward-looking piezoelectric transducers with thin substrates. This study aims to estimate the volume of the bladder using a small number of piezoelectric transducers. A least-squares method was implemented to optimize an ellipsoid in a quadratic surface equation for bladder volume estimation. Ex-vivo experiments of a pig bladder were conducted to validate the proposed system. This work presents the potential of the approach for wearable bladder monitoring, which has similar measurement accuracy compared to the commercial bladder imaging system. The wearable bladder scanner can be improved further as electronic voiding diaries by adding a few more features to the current function.

Design and Analysis of an Active Reflection Controller That Can Reduce Acoustic Signal Refer to the Angle of Incidence.

Techniques for reducing the reflection of acoustic signals have recently been actively studied. Most methods for reducing acoustic signals were studied using the normal-incidence wave reduction technique. Although the technique of canceling an object from the normal incidence wave is essential, research on reducing acoustic signals according to the angle of incidence is required for practical applications. In this study, we designed, fabricated, and experimented with an active reflection controller that can reduce acoustic signals according to the angle of incidence. The controller consists of a transmitter on one layer, a receiver sensor on two layers, and an acoustic window on three layers. To reduce the reflected signal, a combination of the time delay and phase was applied to the controller to minimize the acoustic signal by up to -23 dB at an angle of 10°. A controller array simulation was performed based on the results of a controlled experiment. In conclusion, our proposed controller can reduce acoustic signals according to the angle of incidence, which makes it suitable for many applications.

Acoustic radiation force for analyzing the mechanical stress in ultrasound neuromodulation.

Objective. Although recent studies have shown that mechanical stress plays an important role in ultrasound neuromodulation, the magnitude and distribution of the mechanical stress generated in tissues by focused ultrasound transducers have not been adequately examined. Various acoustic radiation force (ARF) equations used in previous studies have been evaluated based on the tissue displacement results and are suitable for estimating the displacement. However, it is unclear whether mechanical stress can be accurately determined. This study evaluates the mechanical stress predicted by various AFR equations and suggests the optimal equation for estimating the mechanical stress in the brain tissue.Approach. In this paper, brain tissue responses are compared through numerical finite element simulations by applying the three most used ARF equations-Reynolds stress force ((RSF)), momentum flux density tensor force, and attenuation force. Three ARF fields obtained from the same pressure field were applied to the linear elastic model to calculate the displacement, mechanical stress, and mean pressure generated inside the tissue. Both the simple pressure field using a single transducer and the complex standing wave pressure field using two transducers were simulated.Main results. For the case using a single transducer, all three ARFs showed similar displacement. However, when comparing the mechanical stress results, only the results using the RSF showed a strong stress tensor at the focal point. For the case of using two transducers, the displacement and stress tensor field of the pattern related to the standing wave were calculated only from the results using the RSF.Significance. The model using RSF equation allows accurate analysis on stress tensor inside the tissue for ultrasound neuromodulation.

Particle Manipulation in 2D Space Using a Capacitive Micromachined Ultrasonic Transducer.

Ultrasonic particle manipulation is a noncontact method for controlling microscale objects, such as cells or microparticles, using an acoustic field. In this study, a 2D array of capacitive micromachined ultrasonic transducers (CMUTs), placed horizontally in immersion, generated ultrasonic waves in the vertical direction, and the oil's surface increased due to the radiation force of the ultrasonic waves. In addition, the radiation force directly exerted a force on a floating particle. By measuring the movement of the reflected laser light by the moving oil surface, the height of the oil's surface deformed by the acoustic radiation force (ARF) was measured. The ARF made a floating particle, as well as the oil's surface, move. The particle moved radially away from the surface position above the transducer, and its velocity was determined by its position on the fluid's surface. When a single channel was operated, it moved 0.4 mm at an average speed of 90 µm/s, and when two adjacent channels were operated, it moved 1.2 mm at a speed of 272 µm/s. The particles moved in any direction on the surface of the oil by controlling the actuation channel using an electrical switch.