RESUMO
Electrodeposition is a versatile method for synthesizing nanostructured films, but controlling the morphology of films containing two or more elements requires a detailed understanding of the deposition process. We used liquid cell transmission electron microscopy to follow the electrodeposition of PtNi nanoparticle films on a carbon electrode during cyclic voltammetry. These in situ observations show that the film thickness increases with each cycle, and by the fourth cycle, branched and porous structures could be deposited. Synchrotron studies using in situ transmission X-ray microscopy further revealed that Ni was deposited in the oxide phase. Ex situ studies of bulk electrodeposited PtNi nanoparticle films indicated the number of cycles and the scanning rate were the most influential parameters, resulting in a different thickness, a different homogeneity, a different nanoparticle size, and a different surface structure, while the precursor concentration did not have a significant influence. By varying the potential range, we were able to obtain films with different elemental compositions.
RESUMO
Proton-exchange membrane fuel cells are one of the most promising energy conversion technologies for both automotive and stationary applications. Scientists are testing a number of solutions to increase the durability of cells, especially catalysts, which are the most expensive component. These solutions include, among others, the modification of the composition and morphology of supported nanoparticles, the platinum-support interface, and the support itself. A detailed understanding of the mechanism of platinum degradation and the subsequent improvement of the durability of the entire cell requires the development of methods for effectively monitoring the behavior of catalytic nanoparticles under various cell operating conditions. The Identical-Location Transmission Electron Microscopy (IL-TEM) method makes it possible to visually track structural and morphological changes in the catalyst directly. Because the tests are performed with a liquid electrolyte imitating a membrane, they provide better control of the degradation conditions and, consequently, facilitate the understanding of nanoparticle degradation processes in various operating conditions. This review is primarily intended to disseminate knowledge about this technique to scientists using electron microscopy in the study of energy materials and to draw attention to issues related to the characterization of the structure of carbon supports.
RESUMO
Laccase is an oxidase of great industrial interest due to its ability to catalyze oxidation processes of phenols and persistent organic pollutants. However, it is susceptible to denaturation at high temperatures, sensitive to pH, and unstable in the presence of high concentrations of solvents, which is a issue for industrial use. To solve this problem, this work develops the synthesis in an aqueous medium of a new Mn metalloenzyme with laccase oxidase mimetic catalytic activity. Geobacillus thermocatenulatus lipase (GTL) was used as a scaffold enzyme, mixed with a manganese salt at 50 °C in an aqueous medium. This leads to the in situ formation of manganese(IV) oxide nanowires that interact with the enzyme, yielding a GTL-Mn bionanohybrid. On the other hand, its oxidative activity was evaluated using the ABTS assay, obtaining a catalytic efficiency 300 times higher than that of Trametes versicolor laccase. This new Mn metalloenzyme was 2 times more stable at 40 °C, 3 times more stable in the presence of 10% acetonitrile, and 10 times more stable in 20% acetonitrile than Novozym 51003 laccase. Furthermore, the site-selective immobilized GTL-Mn showed a much higher stability than the soluble form. The oxidase-like activity of this Mn metalloenzyme was successfully demonstrated against other substrates, such as l-DOPA or phloridzin, in oligomerization reactions.
Assuntos
Lacase , Manganês , Lacase/metabolismo , Lacase/química , Manganês/química , Teste de Materiais , Geobacillus/enzimologia , Tamanho da Partícula , Materiais Biocompatíveis/química , Materiais Biocompatíveis/síntese química , Materiais Biocompatíveis/metabolismo , Lipase/metabolismo , Lipase/químicaRESUMO
Transforming amines with low boiling points and high volatilities into protic salts is a versatile strategy to utilize low molecular weight compounds as precursors for N-doped carbon structures in a straightforward carbonization procedure. Herein, conventional mineral acids commonly used for the synthesis of protic salts were replaced by bio-derived phytic acid, which, combined with various amines and amino acids, yielded partially or fully bio-derived protic salts. The biomass-based salts showed higher char-forming ability than their mineral acid-based analogs (up to 55.9% at 800°), simultaneously providing carbon materials with significant porosity (up to 1177 m2g-1) and a considerable level of N,P,O-doping. Here, we present the first comprehensive study on the correlation between the structure of the bio-derived protic precursors and the properties of derived carbon materials to guide future designs of biomass-derived precursors for the one-step synthesis of sustainable carbon materials. Additionally, we demonstrate how to improve the textural properties of the protic-salt-derived carbons (which suffer from high brittleness) by simply upgrading them into highly flexible nanocomposites using high-quality single-walled carbon nanotubes. Consequently, self-standing electrodes for the oxygen reduction reaction were created.