Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 19 de 19
Filtrar
Mais filtros

Base de dados
Assunto principal
Tipo de documento
Intervalo de ano de publicação
1.
Nat Mater ; 22(4): 466-473, 2023 Apr.
Artigo em Inglês | MEDLINE | ID: mdl-36973543

RESUMO

Nickel-based superconductors provide a long-awaited experimental platform to explore possible cuprate-like superconductivity. Despite similar crystal structure and d electron filling, however, superconductivity in nickelates has thus far only been stabilized in thin-film geometry, raising questions about the polar interface between substrate and thin film. Here we conduct a detailed experimental and theoretical study of the prototypical interface between Nd1-xSrxNiO2 and SrTiO3. Atomic-resolution electron energy loss spectroscopy in the scanning transmission electron microscope reveals the formation of a single intermediate Nd(Ti,Ni)O3 layer. Density functional theory calculations with a Hubbard U term show how the observed structure alleviates the polar discontinuity. We explore the effects of oxygen occupancy, hole doping and cation structure to disentangle the contributions of each for reducing interface charge density. Resolving the non-trivial interface structure will be instructive for future synthesis of nickelate films on other substrates and in vertical heterostructures.

2.
Chemistry ; 27(68): 17145-17158, 2021 Dec 06.
Artigo em Inglês | MEDLINE | ID: mdl-34496083

RESUMO

In a combined experimental and theoretical study we assess the role of Co incorporation on the OER activity of LaCox Fe1-x O3 . Phase pure perovskites were synthesized up to x = 0 . 300 in 0.025/0.050 steps. HAADF STEM and EDX analysis points towards FeO2 -terminated (001)-facets in LaFeO3 , in accordance with the stability diagram obtained from density functional theory calculations with a Hubbard U term (DFT+U). Linear sweep voltammetry conducted in a rotating disk electrode setup shows a reduction of the OER overpotential and a nonmonotonic trend with x, with double layer capacitance measurements indicating an intrinsic nature of activity. This is supported by DFT+U results that show reduced overpotentials for both Fe and Co reaction sites with the latter reaching values of 0.32-0.40 V, ∼0.3 V lower than for Fe. This correlates with a stronger reduction of the binding energy difference of the *O and *OH intermediates towards an optimum value of 1.6 eV for x = 0 . 250 , the OH deprotonation being the potential limiting step in most cases. Significant variations of the magnetic moments of both surface and subsurface Co and Fe during OER demonstrate that the beneficial effect is a result of a concerted action involving many surrounding ions, which extends the concept of the active site.

3.
Angew Chem Int Ed Engl ; 60(30): 16514-16520, 2021 Jul 19.
Artigo em Inglês | MEDLINE | ID: mdl-33998763

RESUMO

The activation of molecular oxygen is a fundamental step in almost all catalytic oxidation reactions. We have studied this topic and the role of surface vacancies for Co3 O4 (100) films with a synergistic combination of experimental and theoretical methods. We show that the as-prepared surface is B-layer terminated and that mild reduction produces oxygen single and double vacancies in this layer. Oxygen adsorption experiments clearly reveal different superoxide species below room temperature. The superoxide desorbs below ca. 120 K from a vacancy-free surface and is not active for CO oxidation while superoxide on a surface with oxygen vacancies is stable up to ca. 270 K and can oxidize CO already at the low temperature of 120 K. The vacancies are not refilled by oxygen from the superoxide, which makes them suitable for long-term operation. Our joint experimental/theoretical effort highlights the relevance of surface vacancies in catalytic oxidation reactions.

4.
J Chem Phys ; 152(12): 124709, 2020 Mar 31.
Artigo em Inglês | MEDLINE | ID: mdl-32241156

RESUMO

Using density functional theory+U (DFT+U) calculations, we explore the effect of dopants on the performance of α-Fe2O3(0001) as an anode material for the oxygen evolution reaction (OER). Systematic screening of 3d, 4d, and 5d transition metal dopants indicates general trends with dopant band filling and allows us to identify the most efficient dopants with respect to the overpotential and relate those to the solution energy and electronic properties. Different conditions (electrochemical vs photoelectrochemical) are accounted for by considering hydroxylated, hydrated, and oxygenated terminations. Based on the DFT+U results, we identify Rh as the most promising dopant that can reduce the overpotential both under dark and illumination conditions: from 0.56 V to 0.48 V for the hydroxylated surface and quite substantially from 1.12 V to 0.31 V for the hydrated termination and from 0.81 V to 0.56 V for the oxygenated surface. The origin of this improvement is attributed to the modification of the binding energy of chemisorbed species to the Fe2O3(0001) surface. Investigation of the spin density of intermediate steps during the OER shows that surface iron ions adopt a wide range of oxidation states (+2, +3, and +4) in pure hematite, depending on the termination and chemisorbed species on the surface, but a Fe+3 state is stabilized predominantly upon doping. While Rh is in the +3 state in the bulk, it transforms to +4 at the surface and acquires a finite magnetic moment in several intermediate steps.

5.
Nano Lett ; 19(11): 8311-8317, 2019 11 13.
Artigo em Inglês | MEDLINE | ID: mdl-31644875

RESUMO

Artificial complex-oxide heterostructures containing ultrathin buried layers grown along the pseudocubic [111] direction have been predicted to host a plethora of exotic quantum states arising from the graphene-like lattice geometry and the interplay between strong electronic correlations and band topology. To date, however, electronic-structural investigations of such atomic layers remain an immense challenge due to the shortcomings of conventional surface-sensitive probes with typical information depths of a few angstroms. Here, we use a combination of bulk-sensitive soft X-ray angle-resolved photoelectron spectroscopy (SX-ARPES), hard X-ray photoelectron spectroscopy (HAXPES), and state-of-the-art first-principles calculations to demonstrate a direct and robust method for extracting momentum-resolved and angle-integrated valence-band electronic structure of an ultrathin buckled graphene-like layer of NdNiO3 confined between two 4-unit cell-thick layers of insulating LaAlO3. The momentum-resolved dispersion of the buried Ni d states near the Fermi level obtained via SX-ARPES is in excellent agreement with the first-principles calculations and establishes the realization of an antiferro-orbital order in this artificial lattice. The HAXPES measurements reveal the presence of a valence-band bandgap of 265 meV. Our findings open a promising avenue for designing and investigating quantum states of matter with exotic order and topology in a few buried layers.

6.
Inorg Chem ; 58(22): 14939-14980, 2019 Nov 18.
Artigo em Inglês | MEDLINE | ID: mdl-31668070

RESUMO

Nanostructured materials are essential building blocks for the fabrication of new devices for energy harvesting/storage, sensing, catalysis, magnetic, and optoelectronic applications. However, because of the increase of technological needs, it is essential to identify new functional materials and improve the properties of existing ones. The objective of this Viewpoint is to examine the state of the art of atomic-scale simulative and experimental protocols aimed to the design of novel functional nanostructured materials, and to present new perspectives in the relative fields. This is the result of the debates of Symposium I "Atomic-scale design protocols towards energy, electronic, catalysis, and sensing applications", which took place within the 2018 European Materials Research Society fall meeting.

7.
Phys Rev Lett ; 111(12): 126804, 2013 Sep 20.
Artigo em Inglês | MEDLINE | ID: mdl-24093290

RESUMO

Density functional theory calculations with an on-site Coulomb repulsion term reveal competing ground states in (111)-oriented (LaAlO(3))(M)/(SrTiO(3))(N) superlattices with n-type interfaces, ranging from spin, orbitally polarized (with selective e(g)('), a(1g), or d(xy) occupation), Dirac point Fermi surface, to charge-ordered flat band phases. These phases are steered by the interplay of (i) Hubbard U, (ii) SrTiO(3) quantum well thickness, and (iii) crystal field splitting tied to in-plane strain. In the honeycomb lattice bilayer N = 2 under tensile strain, inversion symmetry breaking drives the system from a ferromagnetic Dirac point (massless Weyl semimetal) to a charge-ordered multiferroic (ferromagnetic and ferroelectric) flat band massive (insulating) phase. With increasing SrTiO(3) quantum well thickness an insulator-to-metal transition occurs.

8.
Sci Rep ; 13(1): 10615, 2023 Jun 30.
Artigo em Inglês | MEDLINE | ID: mdl-37391462

RESUMO

The dice lattice, containing a stack of three triangular lattices, has been proposed to exhibit nontrivial flat bands with nonzero Chern numbers, but unlike the honeycomb lattice it is much less studied. By employing density-functional theory (DFT) calculations with an on-site Coulomb repulsion term, we explore systematically the electronic and topological properties of (LaXO3)3/(LaAlO3)3(111) superlattices with X = Ti, Mn and Co, where a LaAlO3 trilayer spacer confines the LaXO3 (LXO) dice lattice. In the absence of spin-orbit coupling (SOC) with symmetry constrained to P3, the ferromagnetic (FM) phase of the LXO(111) trilayers exhibits a half-metallic band structure with multiple Dirac crossings and coupled electron-hole pockets around the Fermi energy. Symmetry lowering induces a significant rearrangement of bands and triggers a metal-to-insulator transition. Inclusion of SOC leads to a substantial anomalous Hall conductivity (AHC) around the Fermi energy reaching values up to [Formula: see text] for X = Mn and Co in P3 symmetry and both in- and out-of-plane magnetization directions in the first case and along [001] in the latter. The dice lattice emerges as a promising playground to realise nontrivial topological phases with high Chern numbers.


Assuntos
Asco , Titânio , Compostos de Cálcio , Condutividade Elétrica
9.
Nat Commun ; 14(1): 8284, 2023 Dec 13.
Artigo em Inglês | MEDLINE | ID: mdl-38092726

RESUMO

Electrocatalysts are the cornerstone in the transition to sustainable energy technologies and chemical processes. Surface transformations under operation conditions dictate the activity and stability. However, the dependence of the surface structure and transformation on the exposed crystallographic facet remains elusive, impeding rational catalyst design. We investigate the (001), (110) and (111) facets of a LaNiO3-δ electrocatalyst for water oxidation using electrochemical measurements, X-ray spectroscopy, and density functional theory calculations with a Hubbard U term. We reveal that the (111) overpotential is ≈ 30-60 mV lower than for the other facets. While a surface transformation into oxyhydroxide-like NiOO(H) may occur for all three orientations, it is more pronounced for (111). A structural mismatch of the transformed layer with the underlying perovskite for (001) and (110) influences the ratio of Ni2+ and Ni3+ to Ni4+ sites during the reaction and thereby the binding energy of reaction intermediates, resulting in the distinct catalytic activities of the transformed facets.

10.
Nanoscale ; 12(14): 7766-7775, 2020 Apr 14.
Artigo em Inglês | MEDLINE | ID: mdl-32215409

RESUMO

The efficiency of photoelectrochemical tandem cells is still limited by the availability of stable low band gap electrodes. In this work, we report a photocathode based on lithium doped copper(ii) oxide, a black p-type semiconductor. Density functional theory calculations with a Hubbard U term show that low concentrations of Li (Li0.03Cu0.97O) lead to an upward shift of the valence band maximum that crosses the Fermi level and results in a p-type semiconductor. Therefore, Li doping emerged as a suitable approach to manipulate the electronic structure of copper oxide based photocathodes. As this material class suffers from instability in water under operating conditions, the recorded photocurrents are repeatedly misinterpreted as hydrogen evolution evidence. We investigated the photocorrosion behavior of LixCu1-xO cathodes in detail and give the first mechanistic study of the fundamental physical process. The reduced copper oxide species were localized by electron energy loss spectroscopy mapping. Cu2O grows as distinct crystallites on the surface of LixCu1-xO instead of forming a dense layer. Additionally, there is no obvious Cu2O gradient inside the films, as Cu2O seems to form on all LixCu1-xO nanocrystals exposed to water. The application of a thin Ti0.8Nb0.2Ox coating by atomic layer deposition and the deposition of a platinum co-catalyst increased the stability of LixCu1-xO against decomposition. These devices showed a stable hydrogen evolution for 15 minutes.

11.
Science ; 368(6486): 71-76, 2020 04 03.
Artigo em Inglês | MEDLINE | ID: mdl-32241944

RESUMO

A defining feature of emergent phenomena in complex oxides is the competition and cooperation between ground states. In manganites, the balance between metallic and insulating phases can be tuned by the lattice; extending the range of lattice control would enhance the ability to access other phases. We stabilized uniform extreme tensile strain in nanoscale La0.7Ca0.3MnO3 membranes, exceeding 8% uniaxially and 5% biaxially. Uniaxial and biaxial strain suppresses the ferromagnetic metal at distinctly different strain values, inducing an insulator that can be extinguished by a magnetic field. Electronic structure calculations indicate that the insulator consists of charge-ordered Mn4+ and Mn3+ with staggered strain-enhanced Jahn-Teller distortions within the plane. This highly tunable strained membrane approach provides a broad opportunity to design and manipulate correlated electron states.

12.
Phys Rev Lett ; 103(17): 176102, 2009 Oct 23.
Artigo em Inglês | MEDLINE | ID: mdl-19905772

RESUMO

The interaction of water with Fe3O4(001) is studied by density functional theory calculations including an on-site Coulomb term. For isolated molecules, dissociative adsorption is strongly promoted at surface defect sites, while at higher coverages a hydrogen-bonded network forms with alternating molecular and dissociated species. This mixed adsorption mode and a suppression of the (square root of 2 x square root of 2)R45 degrees reconstruction are confirmed by a quantitative low energy electron diffraction analysis. Adsorbate induced electron transfer processes add a new dimension towards understanding the catalytic activity of magnetite(001).

13.
Sci Rep ; 9(1): 17306, 2019 Nov 21.
Artigo em Inglês | MEDLINE | ID: mdl-31754125

RESUMO

Based on density functional theory calculations including a Coulomb repulsion parameter U, we explore the topological properties of (LaXO3)2/(LaAlO3)4 (111) with X = 4d and 5d cations. The metastable ferromagnetic phases of LaTcO3 and LaPtO3 with preserved P321 symmetry emerge as Chern insulators (CI) with C = 2 and 1 and band gaps of 41 and 38 meV at the lateral lattice constant of LaAlO3, respectively. Berry curvatures, spin textures as well as edge states provide additional insight into the nature of the CI states. While for X = Tc the CI phase is further stabilized under tensile strain, for X = Pd and Pt a site disproportionation takes place when increasing the lateral lattice constant from aLAO to aLNO. The CI phase of X = Pt shows a strong dependence on the Hubbard U parameter with sign reversal for higher values associated with the change of band gap opening mechanism. Parallels to the previously studied (X2O3)1/(Al2O3)5 (0001) honeycomb corundum layers are discussed. Additionally, non-magnetic systems with X = Mo and W are identified as potential candidates for Z2 topological insulators at aLAO with band gaps of 26 and 60 meV, respectively. The computed edge states and Z2 invariants underpin the non-trivial topological properties.

14.
J Phys Condens Matter ; 19(40): 406217, 2007 Oct 10.
Artigo em Inglês | MEDLINE | ID: mdl-22049116

RESUMO

Density-functional theory calculations were carried out for the multiferroic EuTiO(3) using the LDA+U approach. Total-energy calculations for ferromagnetic (F), and antiferromagnetic A-, C-, and G-type arrangements in the cubic phase shows that the ground-state magnetic configuration is G-type antiferromagnetic for U≤6 eV and ferromagnetic for U≥7 eV. Values of first- and second-neighbour exchange integrals have been calculated by mapping the energy difference between the different magnetic configurations to a Heisenberg Hamiltonian. The system seems to be critically balanced between ferromagnetic and antiferromagnetic states for realistic values of U, and switches from antiferromagnetic to a ferromagnetic ground state on hydrostatic expansion of volume.

15.
Sci Rep ; 5: 7909, 2015 Jan 20.
Artigo em Inglês | MEDLINE | ID: mdl-25601648

RESUMO

The diverse functionality emerging at oxide interfaces calls for a fundamental understanding of the mechanisms and control parameters of electronic reconstructions. Here, we explore the evolution of electronic phases in (LaAlO3)M/(SrTiO3)N (001) superlattices as a function of strain and confinement of the SrTiO3 quantum well. Density functional theory calculations including a Hubbard U term reveal a charge ordered Ti(3+) and Ti(4+) state for N = 2 with an unanticipated orbital reconstruction, displaying alternating d(xz) and d(yz) character at the Ti(3+) sites, unlike the previously reported d(xy) state, obtained only for reduced c-parameter at a(STO). At aLAO c-compression leads to a Dimer-Mott insulator with alternating d(xz), d(yz) sites and an almost zero band gap. Beyond a critical thickness of N = 3 (a(STO)) and N = 4 (aLAO) an insulator-to-metal transition takes place, where the extra e/2 electron at the interface is redistributed throughout the STO slab with a d(xy) interface orbital occupation and a mixed d(xz) + d(yz) occupation in the inner layers. Chemical variation of the SrTiO3 counterpart (LaAlO3 vs. NdGaO3) proves that the significant octahedral tilts and distortions in the SrTiO3 quantum well are induced primarily by the electrostatic doping at the polar interface and not by variation of the SrTiO3 counterpart.

16.
J Phys Condens Matter ; 22(4): 043001, 2010 Feb 03.
Artigo em Inglês | MEDLINE | ID: mdl-21386302

RESUMO

Oxide interfaces have attracted considerable attention in recent years due to the emerging novel behavior which does not exist in the corresponding bulk parent compounds. This opens possibilities for future applications in oxide-based electronics and spintronics devices. Among the different materials combinations, heterostructures containing the two simple band insulators LaAlO(3) and SrTiO(3) have advanced to a model system exhibiting unanticipated properties ranging from conductivity, to magnetism, even to superconductivity. Electronic structure calculations have contributed significantly towards understanding these phenomena and we review here the progress achieved in the past few years, also showing some future directions and perspectives. A central issue in understanding the novel behavior in these oxide heterostructures is to discover the way (or ways) that these heterostructures deal with the polar discontinuity at the interface. Despite analogies to polar semiconductor interfaces, transition metal oxides offer much richer possibilities to compensate the valence mismatch, including, for example, an electronic reconstruction. Moreover, electronic correlations can lead to additional complex behavior like charge disproportionation and order, magnetism and orbital order. We discuss in some detail the role of finite size effects in ultrathin polar films on a nonpolar substrate leading to another intriguing feature-the thickness-dependent insulator-to-metal transition in thin LaAlO(3) films on a SrTiO(3)(001) substrate, driven by the impending polar catastrophe. The strong and uniform lattice polarization that emerges as a response to the potential build-up enables the system to remain insulating up to a few layers. However, beyond a critical thickness there is a crossover from an ionic relaxation to an electronic reconstruction. At this point two bands of electron and hole character, separated both in real and in reciprocal space, have been shifted sufficiently by the internal field in LaAlO(3) to impose the closing of the bandgap. We discuss briefly further parameters that allow one to manipulate this behavior, e.g. via vacancies, adsorbates or an oxide capping layer.

17.
J Phys Condens Matter ; 22(4): 045504, 2010 Feb 03.
Artigo em Inglês | MEDLINE | ID: mdl-21386319

RESUMO

First-principles calculations were performed for orthorhombic HgO, rhombohedral and cubic phases of HgTiO(3) (HTO) and HgPbO(3) (HPO). The calculations show that in the rhombohedral phase HTO is a direct gap insulator with a gap of ∼1.6 eV. The rhombohedral phase of HPO, on the other hand, shows a weak metallic character. The results provide an explanation for the electrical properties of these compounds. The cubic phases of HTO and HPO are invariably metallic in nature, thereby suggesting that for HTO the rhombohedral-cubic transition must also be accompanied by a change in the electrical state. Examination of the electronic density of states of these systems revealed no significant on-site mixing of Hg 5d and Hg 6s states in any of these materials.

18.
Phys Rev Lett ; 102(10): 107602, 2009 Mar 13.
Artigo em Inglês | MEDLINE | ID: mdl-19392161

RESUMO

A pronounced uniform polar distortion extending over several unit cells enables thin LaAlO3 overlayers on SrTiO3(001) to counteract the charge dipole and thereby neutralize the "polarization catastrophe" that is suggested by simple ion counting. This unanticipated mechanism, obtained from density functional theory calculations, allows several unit cells of the LaAlO3 overlayer to remain insulating (hence, fully ionic). The band gap of the system, defined by occupied O 2p states at the surface and unoccupied Ti 3d states at the interface in some cases approximately 20 A distant, decreases with increasing thickness of the LaAlO3 film before an insulator-to-metal transition and a crossover to an electronic reconstruction occurs at around five monolayers of LaAlO3.

19.
Phys Rev Lett ; 99(1): 016802, 2007 Jul 06.
Artigo em Inglês | MEDLINE | ID: mdl-17678179

RESUMO

To study digital Mott insulator LaTiO3 and band insulator SrTiO3 interfaces, we apply correlated band theory within the local density approximation including a Hubbard U to (n, m) multilayers, 1

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA