Human health risk of mercury in street dust: A case study of children in the vicinity of compact fluorescence lamp factory, Hanoi, Vietnam.

Urban dust has been contaminated with toxic heavy metals from various diffused sources. On August 28, 2019, the compact fluorescence lamp (CFL) factory that generates light for Rang Dong Light Source and Vacuum Flask in Hanoi City in Vietnam was accidentally fired. The assessment for Hg contamination and its human health impact 2 months after the incident was conducted in autumn 2019. The heavy Hg pollution is still found near CFL. Additionally, localized Hg pollution by air and wind direction was identified at sites in the northeast direction from CFL. Namely, in the area located downstream of the southwest monsoon wind, Hg had a trend higher than other directions. The hazard quotient (HQ) and the hazard index (HI) were evaluated by four routes of Hg exposure pathways. The HI values for children and adults in the most polluted site (Site 15) were 0.968 and 0.468, respectively. This meant that children who lived around this site and commuted to schools were the most at risk regarding the potential adverse health effects of Hg in street dust around the polluted areas. This study also showed that Hg levels were affected by wind direction and that the higher Hg levels in the most polluted sites resulted from the wind flow to the sites. This study revealed that street dust may be a useful tool for the assessment of human and environmental health.

Combination of Vortex Agitation and Ultrasonic Irradiation for Mercury Removal from Sediment by Acid Extraction.

The removal of Hg from solid waste plays a key role in environmental protection. In this study, a fast, simple, and effective method for the removal of Hg by acid extraction, using a combination of vortex agitation and ultrasonic irradiation along with hydrobromic acid (HBr), was established using Hg-containing solid wastes. The optimal durations of vortex agitation and ultrasonic irradiation with 48% v/v of HBr were 5 and 6 min, respectively, and total Hg (T-Hg) extraction was achieved within 21 min. The proposed method was validated using the Certified Reference Material (CRM) ERM CC580 (estuarine sediment) and CRM NMIJ 7302-a (marine sediment). Under the optimized conditions, the efficiency rates of T-Hg extraction in both CRMs were 99.5% and 94.2%, with repeatabilities of 3.21% RSD and 2.31% RSD, respectively. The proposed extraction method can also be used for the remediation of Hg in other environmental matrices.

Perfluoroalkyl substances in food contact materials: preliminary investigation in Vietnam and global comparison.

Per- and polyfluoroalkyl substances (PFASs) are a group of concerned persistent toxic substances, especially for their application or unintentional formation in food contact materials (FCMs). However, information about the occurrence, sources, and fate of these pollutants in food packaging materials from Vietnam as well as Southeast Asian countries is probably still obscured. In this study, levels of 13 perfluoroalkyl carboxylic acids (PFCAs) and 4 sulfonates (PFSs) were determined in various types of food packaging samples collected from Vietnamese markets. Generally low concentrations of total 17 PFASs (median 0.341; max 624 ng/g) suggested that these compounds were mainly inadvertently produced rather than intentionally added to the packaging materials. A few mochi paper tray samples had relatively high PFAS levels (372-624 ng/g), which were dominated by long-chain (C8-C12) PFCAs. A comprehensive and updated overview of PFASs in FCMs from different countries in the world was also provided. Current database could not provide conclusive trends of PFAS concentrations and profiles in FCMs between continents and countries. The highest levels up to ppm were reported for PFCAs (e.g., PFBA, PFHxA, PFOA, and PFDA) and several fluorotelomer alcohols and carboxylic acids, while PFSs were almost absent in FCMs. FPASs can emit from FCMs, migrate to food, and then contribute to dietary exposure in humans and animals. Additional investigations on the occurrence, sources, behavior and fate, and impacts of PFASs in FCMs are critically needed, especially in emerging and developing countries.