RESUMO
The bismuth hydride (2,6-Mes2H3C6)2BiH (1, Mes = 2,4,6-trimethylphenyl), which has a Bi-H 1H NMR spectroscopic signal at δ = 19.64 ppm, was reacted with phenylacetylene at 60 °C in toluene to yield [(2,6-Mes2C6H3)2BiC(Ph)=CH2] (2) after 15 min. Compound 2 was characterized by 1H, 13C NMR, and UV-vis spectroscopy, single crystal X-ray crystallography, and calculations employing density functional theory. Compound 2 is the first example of a hydrobismuthation addition product and displays Markovnikov regioselectivity. Computational methods indicated that it forms via a radical mechanism with an associated Gibbs energy of activation of 91 kJ mol-1 and a reaction energy of -90 kJ mol-1.
RESUMO
Salt metathesis routes to five new -N(SiMe3)2 nickel derivatives were studied to illuminate their mode of formation, structures, and spectroscopy. The reaction between NiI2 and K{N(SiMe3)2} afforded the Ni(II) and Ni(I) complexes [K][Ni{N(SiMe3)2}3] (1) and [K][Ni{N(SiMe3)2}2] (2). Dissolving 1 in tetrahydrofuran (THF) gave the Ni(II) species [K(THF)2][Ni{N(SiMe3)2}3] (3). The Ni(I) salt [K(DME)][Ni2{N(SiMe3)2}3] (4) was obtained by using NiCl2(DME) (DME = 1,2-dimethoxyethane) as the nickel source rather than NiI2. The isolation of the Ni(I) complexes 2 and 4 highlights the tendency for K{N(SiMe3)2} to function as a reducing agent. Introduction of adventitious O2 to solutions of [K][Ni{N(SiMe3)2}2] (2) gave the nickel inverse crown ether (ICE) species [K2][O(Ni{N(SiMe3)2}2)2] (5). Complex 5 is the first ICE complex of nickel and is one of four known ICE complexes for the 3d metals. The experimental results indicate that the reduced Ni(I) bis(trimethylsilyl)amides are relatively easily generated, whereas Ni(III) derivatives that might be expected from a disproportionation of a Ni(II) derivative are apparently not yet isolable by the above routes. Overall, the new species crystallize readily from the reaction mixtures, but under ambient conditions, they begin to decompose as solids within ca. 24 h, which hinders their characterization.
RESUMO
Careful analysis of the crystals formed in the reduction of AriPr8AlI2 (AriPr8 = C6H-2,6-(C6H2-2,4,6-iPr3)2-3,5-iPr2) with sodium on sodium chloride showed them to contain the long sought-after dialuminene AriPr8AlAlAriPr8 (1) that forms alongside the previously characterized alanediyl:AlAriPr8. The single crystal X-ray structure of 1 revealed a nearly planar, trans-bent C(ipso)AlAlC(ipso) core with an Al-Al distance of 2.648(2) Å. The molecular and electronic structure of 1 are consistent with a Al-Al double dative interaction augmented with diradical character and stabilized by dispersion interactions. Density functional theory calculations showed that the reactivity of:AlAriPr8 with dihydrogen involves 1, not:AlAriPr8, as the reactive species. In contrast, the reaction of:AlAriPr8 with ethylene gave two products, the 1,4-dialuminacyclohexane AriPr8Al(C2H4)2AlAriPr8 (2) and the aluminacyclopentane AriPr8Al(C4H8) (3), that can both form from the aluminacyclopropane intermediate AriPr8Al(C2H4). Although the [2+2+2] cycloaddition of 1 with two equivalents of ethylene was also calculated to be exergonic, it is likely to be kinetically blocked by the numerous isopropyl substituents surrounding the Al-Al bond. Attempts to fine-tune the steric bulk of the terphenyl ligand to allow stronger Al-Al bonding were unsuccessful, leading to the isolation of the sodium salt of a cyclotrialuminene, Na2[AlAriPr6]3 (4), instead of AriPr6AlAlAriPr6.
RESUMO
Interactions between sterically crowded hydrocarbon-substituted ligands are widely considered to be repulsive because of the intrusion of the electron clouds of the ligand atoms into each other's space, which results in Pauli repulsion. Nonetheless, there is another interaction between the ligands which is less widely publicized but is always present. This is the London dispersion (LD) interaction which can occur between atoms or molecules in which dipoles can be induced instantaneously, for example, between the H atoms from the ligand C-H groups.These LD interactions are always attractive, but their effects are not as widely recognized as those of the Pauli repulsion despite their central role in the formation of condensed matter. Their relatively poor recognition is probably due to the relative weakness (ca. 1 kcal mol-1) of individual H···H interactions owing to their especially strong distance dependence. In contrast, where there are numerous H···H interactions, a collective LD energy equaling several tens of kcal mol-1 may ensue. As a result, in some molecules the latent importance of the LD attraction energies emerges and assumes a prominence that can overshadow the Pauli effects (e.g., in the stabilization of high-oxidation-state transition-metal alkyls, inducing disproportionation reactions, or in the stabilization of otherwise unstable bonds).Despite being known for over a century, the accurate quantification of individual H···H LD effects in molecular species is a relatively recent phenomenon and at present is based mainly on modified DFT calculations. A few leading reviews summarized these earlier studies of the C-H···H-C LD interactions in organic molecules, and their effects on the structures and stabilities were described. LD effects in sterically crowded inorganic and organometallic molecules have been recognized.The author's interest in these LD effects arose fortuitously over a decade ago during research on sterically crowded heavier main-group element carbene analogues and two-coordinate, open-shell (d1-d9) transition-metal complexes where counterintuitive steric effects were observed. More detailed explanations of these effects were provided by dispersion-corrected DFT calculations in collaboration with the groups of Tuononen and Nagase (see below).This Account describes our development of these initial results for other inorganic molecular classes. More recently, the work has led us to move to the planned inclusion of dispersion effects in ligands to stabilize new molecular types with theoretical input from the groups of Vasko and Grimme (see below). Our approach sought to use what Grimme has described as dispersion effect donor (DED) groups (i.e., spatially close-lying, densely packed substituents either as ligands (e.g., -C6H2-2,4,6-Cy3, Cy = cyclohexyl) or as parts of ligands (e.g., a Cy substituent) that produce relatively large dispersion energies to stabilize these new compounds.We predict that the future design of sterically crowding hydrocarbon ligands will include the consideration and incorporation of LD effects as a standard methodology for directed use in the attainment of new synthetic targets.
Assuntos
Complexos de Coordenação , Elementos de Transição , Hidrocarbonetos , Ligantes , Elementos de Transição/químicaRESUMO
London dispersion (LD) interactions, which stem from long-range electron correlations arising from instantaneously induced dipoles can occur between neighboring atoms or molecules, for example, between H atoms within ligand C-H groups. These interactions are currently of interest as a new method of stabilizing long bonds and species with unusual oxidation states. They can also limit reactivity by installing LD enhanced groups into organic frameworks or ligand substituents. Here, we address the most recent advances in the design of LD enhanced ligands, the sterically counterintuitive structures that can be generated and the consequences that these interactions can have on the structures and reactivity of sterically crowded heavy groupâ 14 species.
RESUMO
A series of Mn(II), Fe(II), and Co(II) bisaryloxide dimers ([M(OC6H2-2,4,6-Cy3)2]2 {M = Mn (1), Fe (2), and Co (3)} were synthesized by the addition of 2,4,6-tricyclohexylphenol (HOC6H2-2,4,6-Cy3) to the silyl amido dimers [M(N(SiMe3)2)2]2 (M = Mn, Fe, Co; Cy = cyclohexyl). An unexpected and unique Co(II) phenoxide derivative (4), [Co(OC6H2-2,4,6-Cy3)(O2C6H-3,5,6-Cy3)]2, was obtained via ligand rearrangement of 3 at ca. 180 °C. This yielded 4 in which there are two unchanged, bridging phenoxide ligands as well as a terminal bidentate semiquinone ligand bound to each cobalt. Complexes 1 and 2 did not undergo such a rearrangement under the same conditions; both are thermally stable to temperatures exceeding 250 °C and feature numerous short-contact (<2.5 Å) H···H interactions consistent with the presence of dispersion stabilization. Use of the aryloxide ligand -OC6H3-2,6-Pri2 (Pri = isopropyl), which is sterically similar to -OC6H2-2,4,6-Cy3 but produces fewer close H···H interactions, gave the trimeric species [M(OC6H3-2,6-Pri2)2]3 {M = Fe (5) or Co (6)} which feature a linear array of three metal atoms bridged by aryloxides. The higher association number in 5 and 6 in comparison to that of 1-3 is due to the lower dispersion energy donor properties of the -OC6H3-2,6-Pri2 ligand and the lower stabilization it produces.
RESUMO
Reaction of {LiC6 H2 -2,4,6-Cyp3 â Et2 O}2 (Cyp=cyclopentyl) (1) of the new dispersion energy donor (DED) ligand, 2,4,6-triscyclopentylphenyl with SnCl2 afforded a mixture of the distannene {Sn(C6 H2 -2,4,6-Cyp3 )2 }2 (2), and the cyclotristannane {Sn(C6 H2 -2,4,6-Cyp3 )2 }3 (3). 2 is favored in solution at higher temperature (345â K or above) whereas 3 is preferred near 298â K. Van't Hoff analysis revealed the 3 to 2 conversion has a ΔH=33.36â kcal mol-1 and ΔS=0.102â kcal mol-1 K-1 , which gives a ΔG300 K =+2.86â kcal mol-1 , showing that the conversion of 3 to 2 is an endergonic process. Computational studies show that DED stabilization in 3 is -28.5â kcal mol-1 per {Sn(C6 H2 -2,4,6-Cyp3 )2 unit, which exceeds the DED energy in 2 of -16.3â kcal mol-1 per unit. The data clearly show that dispersion interactions are the main arbiter of the 3 to 2 equilibrium. Both 2 and 3 possess large dispersion stabilization energies which suppress monomer dissociation (supported by EDA results).
RESUMO
A series of alkali metal 1-adamantoxide (OAd1 ) complexes of formula [M(OAd1 )(HOAd1 )2 ], where M=Li, Na or K, were synthesised by reduction of 1-adamantanol with excess of the alkali metal. The syntheses indicated that only one out of every three HOAd1 molecules was reduced. An X-ray diffraction study of the sodium derivative shows that the complex features two unreduced HOAd1 donors as well as the reduced alkoxide (OAd1 ), with the Ad1 fragments clustered together on the same side of the NaO3 plane, contrary to steric considerations. This is the first example of an alkali metal reduction of an alcohol that is inhibited from completion due to the formation of the [M(OAd1 )(HOAd1 )2 ] complexes, stabilized by London dispersion effects. NMR spectroscopic studies revealed similar structures for the lithium and potassium derivatives. Computational analyses indicate that decisive London dispersion effects in the molecular structure are a consequence of the many C-Hâ â â H-C interactions between the OAd1 groups.
RESUMO
The reaction of 1 equiv of the dimeric lithium salt of a new London dispersion effect donor ligand {Li(C6H2-2,4,6-Cy3)·OEt2}2 (Cy = cyclohexyl) with SnCl2 afforded the distannene {Sn(C6H2-2,4,6-Cy3)2}2 (1). The distannene remains dimeric in solution, as indicated by its room-temperature 119Sn NMR signal (δ = 361.3 ppm) and its electronic spectrum, which is invariant over the temperature range of -10 to 100 °C. The formation of the distannene, which has a short Sn-Sn distance of 2.7005(7) Å and greatly enhanced stability in solution compared to that of other distannenes, is due to increased interligand London dispersion (LD) attraction arising from multiple close approaches of ligand C-H moieties across the Sn-Sn bond. DFT-D4 calculations revealed a dispersion stabilization of dimer 1 of 38 kcal mol-1 and a dimerization free energy of ΔGdimer = -6 kcal mol-1. In contrast, the reaction of 2 equiv of the similarly shaped but less bulky, less hydrogen-rich Li(C6H2-2,4,6-Ph3)·(OEt2)2 with SnCl2 yielded the monomeric stannylene Sn(C6H2-2,4,6-Ph3)2 (2), which is unstable in solution at ambient temperature.
RESUMO
The reaction of :AlAriPr8 (AriPr8 = C6H-2,6-(C6H2-2,4,6-iPr3)2-3,5-iPr2) with ArMe6N3 (ArMe6 = C6H3-2,6-(C6H2-2,4,6-Me3)2) in hexanes at ambient temperature gave the aluminum imide AriPr8AlNArMe6 (1). Its crystal structure displayed short Al-N distances of 1.625(4) and 1.628(3) Å with linear (C-Al-N-C = 180°) or almost linear (C-Al-N = 172.4(2)°; Al-N-C = 172.5(3)°) geometries. DFT calculations confirm linear geometry with an Al-N distance of 1.635 Å. According to energy decomposition analysis, the Al-N bond has three orbital components totaling -1350 kJ mol-1 and instantaneous interaction energy of -551 kJ mol-1 with respect to :AlAriPr8 and ArMe6NÌ:. Dispersion accounts for -89 kJ mol-1, which is similar in strength to one Al-N π-interaction. The electronic spectrum has an intense transition at 290 nm which tails into the visible region. In the IR spectrum, the Al-N stretching band is calculated to appear at ca. 1100 cm-1. In contrast, reaction of :AlAriPr8 with 1-AdN3 or Me3SiN3 gave transient imides that immediately reacted with a second equivalent of the azide to give AriPr8Al[(NAd)2N2] (2) or AriPr8Al(N3){N(SiMe3)2} (3).
RESUMO
The reaction of 2 equiv of LiN(SiMe3)2·Et2O with TiCl3(NMe3)2 or VCl3(NMe3)2 afforded the dimeric, halide bridged complexes [Ti(µ-Cl){N(SiMe3)2}2]2 (1) or [V(µ-Cl){N(SiMe3)2}2]2 (2) in moderate yields. The reduction of titanium complex 1 with 3 equiv of 5% (wt) Na/NaCl gave the mixed metal titanium/sodium hydride cluster Ti2(µ-H)2{N(SiMe3)2}3{N(SiMe3)(SiMe2CH)}(Na) (3), which was formed by activation of two C-H bonds at a single methyl group of one of the bis(trimethylsilyl)amide ligands. Attempts to form the analogous vanadium complex by reduction of 2 gave only intractable products. Treatment of Co{N(SiMe3)2}2 with 1 equiv of BrN(SiMe3)2 (which was previously shown to give the unique three-coordinate cobalt(III) trisamide Co{N(SiMe3)2}3) afforded the polymeric [(µ-Br)Co{µ-N(SiMe3)(SiMe2CH2CH2Me2Si)(Me3Si)µ-N}Co(µ-Br)]∞ (4) as a second product, which was shown by a structural analysis to possess a carbon-carbon bond formed between the two ligands. Attempts to isolate manganese and iron complexes analogous to 4 were unsuccessful. The role of bromine in these reactions was further studied by examining the reaction of 0.5 equiv of elemental bromine with [Mn{N(SiMe3)2}2]2 or [Co{N(SiMe3)2}2]2, which for manganese was shown to give the previously reported manganese trisamide Mn{N(SiMe3)2}3 but for cobalt gives the dimeric amide-bridged [Co(Br){µ-N(SiMe3)2}]2 (5).
RESUMO
The direct reactions of the large terphenyl thiols HSAriPr4 (AriPr4= -C6H3-2,6-(C6H3-2,6-iPr2)2) and HSAriPr6 (AriPr6= -C6H3-2,6-(C6H2-2,4,6-iPr3)2) with stoichiometric amounts of mesitylcopper(I) in THF at ca. 80 °C afforded the first well-characterized dimeric copper thiolato species {CuSAriPr4}2 (1) and {CuSAriPr6}2 (2) with elimination of mesitylene. The complexes 1 and 2 were characterized by NMR and electronic spectroscopy as well as by X-ray crystallography. They have dimeric Cu2S2 core structures in which the two copper atoms are bridged by the sulfurs from the thiolato ligands and feature short Cu--Cu distances near 2.4 Å as well as a weak copper-flanking aryl ring interaction from a terphenyl substituent. The structures of the planar Cu2S2 cores bear a resemblance to the CuA site in nitrous oxide reductase in which two cysteines also bridge two copper atoms. The related dimeric Li2S2 structural motif was also observed in the lithium congeners {LiSAriPr4}2 (3) and {LiSAriPr6}2 (4) which were synthesized directly from the thiols and n-BuLi in hexanes. However, despite the very similar effective ionic radii of the Li+ (0.59 Å) and Cu+ (0.60 Å) ions, the Li--Li structures display very much longer (by more than ca. 0.5 Å) separations than the corresponding Cu--Cu distances in 1 and 2, which may be due to weaker dispersion interactions.
RESUMO
Treatment of Fe{N(SiMe3)2}2 with 2 equiv of the appropriate phenol or thiol affords the dimers {Fe(OC6H2-2,6-But2-4-Me)2}2 (1) and {Fe(OC6H3-2,6-But2)2}2 (2) or the monomeric Fe{SC6H3-2,6-(C6H3-2,6-Pri2)2}2 (3) in moderate to excellent yields. Recrystallization of 1 and 2 from diethyl ether gives the corresponding three-coordinate ether complexes Fe(OC6H3-2,6-But2-4-Me)2(OEt2) (4) and Fe(OC6H3-2,6-But2)2(OEt2) (5). In contrast, no diethyl ether complex is formed by the dithiolate 3. The 1H NMR spectra of 4 and 5 show equilibria between the ether complexes and the base-free dimers. A comparison of these spectra with those of the dimeric 1 and 2 allows an unambiguous assignment of the paramagnetically shifted signals. Treatment of 1 with excess ammonia gives the tetrahedral diammine Fe(OC6H2-2,6-But2-4-Me)2(NH3)2 (6). Ammonia is strongly coordinated in 6, with no apparent loss of ammine ligand either in solution or upon heating under low pressure. In contrast, significantly weaker ammonia coordination is observed when dithiolate 3 is treated with excess ammonia, which gives the diammine Fe{SC6H3-2,6-(2,6-Pri2-C6H3)2}2(NH3)2 (7). Complex 7 readily loses ammonia either in solution or under reduced pressure to give the monoammine complex Fe{SC6H3-2,6-(2,6-Pri2-C6H3)2}2(NH3) (8). The weak binding of ammonia by iron thiolate 7 reflects the likely behavior of the proposed iron-sulfur active site in nitrogenases, where release of ammonia is required to close the catalytic cycle.
Assuntos
Amônia/química , Calcogênios/química , Complexos de Coordenação/química , Éteres/química , Ferro/química , Complexos de Coordenação/síntese química , Estrutura MolecularRESUMO
The reaction of the vanadium(III) tris(silylamide) V{N(SiMe3)2}3 with LiAlH4 in diethyl ether gives the highly unstable mixed-metal polyhydride [V(µ2-H)6[Al{N(SiMe3)2}2]3][Li(OEt2)3] (1), which was structurally characterized. Alternatively, performing the same reaction in the presence of 12-crown-4 affords a rare example of a structurally verified vanadium terminal hydride complex, [VH{N(SiMe3)2}3][Li(12-crown-4)2] (2). The corresponding deuteride 2D was also prepared using LiAlD4. In contrast, no hydride complexes were isolated by reaction of M{N(SiMe3)2}3 (M = Cr, Fe) with LiAlH4 and 12-crown-4. Instead, these reactions afforded the anionic metal(II) complexes [M{N(SiMe3)2}3][Li(12-crown-4)2] (3, M = Cr; 4, M = Fe). The reaction of the iron(III) tris(silylamide) Fe{N(SiMe3)2}3 with lithium aluminum hydride without a crown ether gives the "hydrido inverse crown" complex [Fe(µ2-H){N(SiMe3)2}2(µ2-Li)]2 (5), while treatment of the same trisamide with alane trimethylamine complex gives the iron(II) polyhydride complex Fe(µ2-H)6[Al{N(SiMe3)2}2]2[Al{N(SiMe3)2}(NMe3)] (6). Complexes 2-6 were characterized by X-ray crystallography, as well as by infrared, electronic, and 1H and 13C (complex 6) NMR spectroscopies. Complexes 1 and 6 are apparently formed by an unusual "metallo-transamination" process.
RESUMO
The two-coordinate metal amide complexes V{N(SiMePh2)2}2 (1) and Cr{N(SiMe2Ph)2}2 (2) were synthesized by reaction of two equivalents of LiN(SiMePh2)2 with VI2(THF)4 or CrCl2(THF)2 in n-hexane. Their crystal structures showed that they have bent coordination, N-V-N = 137.0(4)°, N-Cr-N = 139.19(5)°, at the metals. The vanadium complex (1) displayed no tendency to isomerize as previously observed for some V(II) amido complexes. Curie fits of SQUID magnetic measurements afforded magnetic moments of 3.36 (1) and 4.68 (2) µB, consistent with high-spin configurations. These values are lower than the spin-only values of 3.88 and 4.90 µB expected for d3 and d4 complexes, suggesting a significant unquenched orbital angular momentum contribution to the overall moment, which is lower as a result of the positive spin-orbit coupling constants.
RESUMO
Reduction of the aluminum iodide AlI2AriPr8 (1; AriPr8 = C6H-2,6-(C6H2-2,4,6-Pri3)2-3,5-Pri2) with 5% w/w Na/NaCl in hexanes gave a dark red solution from which the monomeric alanediyl :AlAriPr8 (2) was isolated in ca. 28% yield as yellow-orange crystals. Compounds 1 and 2 were characterized by X-ray crystallography, electronic and NMR spectroscopy, and theoretical calculations. The Al atom in 2 is one-coordinate, and the compound displays two absorptions in its electronic spectrum at 354 and 455 nm. It reacts with H2 under ambient conditions to give the aluminum hydride {AlH(µ-H)AriPr8}2, probably via a weakly bound dimer of 2 as an intermediate.
RESUMO
The reaction of the molybdenum-molybdenum triple-bonded dimer (CO)2CpMo≡MoCp(CO)2 (Cp = η5-C5H5) with the triple-bonded dimetallynes AriPr4MMAriPr4 or AriPr6MMAriPr6 (AriPr4 = C6H3-2,6-(C6H3-2,6-Pri2)2, AriPr6 = C6H3-2,6-(C6H2-2,4,6-Pri3)2; M = Ge, Sn, or Pb) under mild conditions (≤80 °C, 1 bar) afforded AriPr4M≡MoCp(CO)2 or AriPr6M≡MoCp(CO)2 in moderate to excellent yields. The reactions represent the first isolable products from a metathesis of two metal-metal triple bonds. Analogous exchange reactions with the single-bonded (CO)3CpMo-MoCp(CO)3 gave ArMÌ-MoCp(CO)3 (Ar = AriPr4 or AriPr6; M = Sn or Pb). The products were characterized by NMR (1H, 13C, 119Sn, or 207Pb), electronic, and IR spectroscopy and by X-ray crystallography.
RESUMO
The reaction of the copper(I) ß-diketiminate copper complex {(Cu(BDIMes))2(µ-C6H6)} (BDIMes = N,N'-bis(2,4,6-trimethylphenyl)pentane-2,4-diiminate) with the low-valent group 13 metal ß-diketiminates M(BDIDip) (M = Al or Ga; BDIDip = N,N'-bis(2,6-diisopropylphenyl)pentane-2,4-diiminate) in toluene afforded the complexes {(BDIMes)CuAl(BDIDip)} and {(BDIMes)CuGa(BDIDip)}. These feature unsupported copper-aluminum or copper-gallium bonds with short metal-metal distances, Cu-Al = 2.3010(6) Å and Cu-Ga = 2.2916(5) Å. Density functional theory (DFT) calculations showed that approximately half of the calculated association enthalpies can be attributed to London dispersion forces.
RESUMO
The synthesis, molecular structures, and spectroscopic details of a series of isocyanide and nitrile complexes of the early first-row transition-metal tris(silyl)amides M{N(SiMe3)2}3 (M = Ti, V) are reported. Previously, first-row transition-metal tris(silyl)amides were generally thought to be incapable of forming complexes with Lewis bases due to their excessive steric crowding. However, it is now shown that simple treatment of the base-free trisamides with 2 equiv of an isocyanide or nitrile base at room temperature results in the formation of the trigonal bipyramidal complexes Ti{N(SiMe3)2}3(1-AdNC)2 (1), Ti{N(SiMe3)2}3(CyNC)2 (2), Ti{N(SiMe3)2}3(ButNC)2 (3), Ti{N(SiMe3)2}3(PhCN)2 (4), V{N(SiMe3)2}3(1-AdNC)2 (5), V{N(SiMe3)2}3(CyNC)2 (6), V{N(SiMe3)2}3(ButNC)2 (7), and V{N(SiMe3)2}3(PhCN)2 (8), which incorporate two donor ligands (1-AdNC = 1-adamantyl isocyanide, CyNC = cyclohexyl isocyanide, ButNC = tert-butyl isocyanide, PhCN = benzonitrile). All complexes display a characteristic increase in the frequency of the multiple bonded C-N stretching mode which is observed to be in the range of 2170-2190 cm-1 for the isocyanide complexes 1-3 and 5-7 and at 2250 cm-1 for the nitrile complex 8. This effect was not observed for the titanium nitrile complex 4, suggesting weak binding of the donor to titanium. Paramagnetic 1H NMR studies showed these complexes to have detectable, though extremely broadened, signals attributable to the trimethylsilyl groups of the amide ligands (δ = ca. 2.8 ppm for titanium isocyanide complexes, ca. 4.5-4.7 ppm for vanadium isocyanide complexes). A variable-temperature 1H NMR study showed that in solution these complexes exist as mixtures of the five-coordinate species and a putative four-coordinate species coordinating a single Lewis basic ligand. Electronic spectroscopy indicated that the vanadium complexes 5-8 bind the Lewis bases more strongly than the corresponding titanium complexes, where the spectra of complexes 1-4 are essentially identical to the base-free Ti{N(SiMe3)2}3 at the temperatures and concentrations studied. In contrast to these results, no corresponding complexes were detected for the metal silylamides M{N(SiMe3)2}3 (M = Cr, Mn, Fe, or Co) when treated with the isocyanide or nitrile bases.
RESUMO
The synthesis and characterization of V(âO){N(SiMe3)2}3 (1), V(âNSiMe3){N(SiMe3)2}3 (2), and V(âNSiMe3)(OSiMe3){N(SiMe3)2}2 (3) are described. Prior attempts to synthesize the vanadium(V) oxo complex 1 via salt metathesis of VOCl3 with the lithium or sodium silylamide salt had yielded either the putative rearranged species V(âNSiMe3)(OSiMe3){N(SiMe3)2}2 (3) or the oxo-bridged, dimetallic {(µ-O)2V2[N(SiMe3)2]4}. We now show that complex 1 is available by treatment of the vanadium(III) tris(silylamide) V{N(SiMe3)2}3 with iodosylbenzene. The imido complex 2 was obtained by treatment of V{N(SiMe3)2}3 with trimethylsilyl azide. Sublimation of 1 formed complex 3, which was determined to be V(âNSiMe3)(OSiMe3){N(SiMe3)2}2, on the basis of infrared, electronic, and 1H and 51V NMR spectroscopies. Crystallographic disorder precluded a complete structural characterization of 3, although a four-coordinate V atom, as well as severely disordered ligands, were apparent. Comparison of the vibrational spectra of 1 and 2 allowed an unambiguous assignment of the V-O (995 cm-1) and V-Nimide (1060 cm-1) stretching bands. The vibrational spectrum of complex 3 displayed strong absorbances at 1090 and 945 cm-1, indicative of its metal imide and metal siloxide moieties. The 1H NMR spectrum of 1 in deuterated benzene showed overlapping signals for the ligand protons proximal and distal to the oxo moiety at 0.52 and 0.38 ppm. The 1H NMR spectrum of 2 in deuterated methylene chloride displayed distinct signals for the imido (0.41 ppm) and amido (0.35 ppm) protons, whereas 1H NMR spectroscopy of 3 showed three signals in an intensity ratio consistent with the formula V(âNSiMe3)(OSiMe3){N(SiMe3)2}2. 51V NMR spectra of 1-3 revealed singlet resonances at -119 ppm (1), -24 ppm (2), and -279 ppm (3). The electronic spectra of 1-3 displayed single absorbances in the charge transfer region, consistent with their d0 electron configurations. Kinetic studies of the spontaneous conversion of complex 1 to 3 were used to determine the rate constants (ca. 0.0002 s-1 (63 °C), 0.0006 s-1 (73 °C), 0.002 s-1 (83 °C)) and activation energy (ca. 20 kcal/mol) of this first-order process.