RESUMO
Auger recombination is a pivotal process for semiconductor nanocrystals (NCs), significantly affecting charge carrier generation and collection in optoelectronic devices. This process depends mainly on the NCs' electronic structures. In our study, we investigated Auger recombination dynamics in manganese (Mn2+)-doped CsPbI3 NCs using transient absorption (TA) spectroscopy combined with theoretical and experimental structural characterization. Our results show that Mn2+ doping accelerates Auger recombination, reducing the biexciton lifetime from 146 to 74 ps with increasing Mn doping concentration up to 10%. This accelerated Auger recombination in Mn-doped NCs is attributed to increased band edge wave function overlap of excitons and a larger density of final states of Auger recombination due to Mn orbital involvement. Moreover, Mn doping reduces the dielectric screening of the excitons, which also contributes to the accelerated Auger recombination. Our study demonstrates the potential of element doping to regulate Auger recombination rates by modifying the materials' electronic structure.
RESUMO
ZnTe colloidal semiconductor nanocrystals (NCs) have shown promise for light-emitting diodes (LEDs) and displays, because they are free from toxic heavy metals (Cd). However, so far, their low photoluminescence (PL) efficiency (â¼30%) has hindered their applications. Herein, we devised a novel structure of ZnTe NCs with the configuration of ZnSe (core)/ZnTe (spherical quantum well, SQW)/ZnSe (shell). The inner layer ZnTe was grown at the surface of ZnSe core with avoiding using highly active and high-risk Zn sources. Due to the formation of coherently strained heterostructure which reduced the lattice mismatch, and the thermodynamic growth of ZnTe, the surface or interface defects were suppressed. A high PL efficiency of >60% was obtained for the green light-emitting ZnSe/ZnTe/ZnSe SQWs after ZnS outer layer passivation, which is the highest value for colloidal ZnTe-based NCs. This work paves the way for the development of novel semiconductor NCs for luminescent and display applications.
RESUMO
Environmentally friendly InP-based quantum dots (QDs) are promising for light-emitting diodes (LEDs) and display applications. So far, the synthesis of highly emitting InP-based QDs via safe and economically viable amine-phosphine remains a challenge. Herein, we report the synthesis of amine-phosphine based InP/ZnSe/ZnS QDs by introducing an alloyed oxidation-free In-ZnSe transition layer (TL) at the core-shell interface. The TL not only has the essential function of preventing oxidation of the core and relieving interfacial strain but also results in oriented epitaxial growth of shell. The alloyed TL significantly mitigates the nonradiative recombination at core-shell interfacial trap states, thereby boosting the photoluminescence (PL) efficiency of the QDs up to 98%. Also, the Auger recombination is suppressed, extending the biexciton lifetime from 60 to 100 ps. The electroluminescence device based on the InP-based QDs shows a high external quantum efficiency over 10%, further demonstrating high quality QDs synthesized by this process.
RESUMO
The double quantum coherence (DQC) signal in nonlinear spectroscopy gives information about the many-body correlation effects not easily available by other methods. The signal is short-lived, consequently, a significant part of it is generated during the pulse overlap. Since the signal is at two times the laser frequency, one may intuitively expect that the pulse overlap-related artifacts are filtered out by the Fourier transform. Here, we show that this is not the case. We perform explicit calculations of phase-modulated two-pulse experiments of a two-level system where the DQC is impossible. Still, we obtain a significant signal at the modulation frequency, which corresponds to the DQC, while the Fourier transform over the pulse delay shows a double frequency. We repeat the calculations with a three-level system where the true DQC signal occurs. We conclude that with realistic dephasing times, the pulse-overlap artifact can be significantly stronger than the DQC signal. Our results call for great care when analyzing such experiments. As a rule of thumb, we recommend that only delays larger than 1.5 times the pulse length should be used.
RESUMO
In polaritons, the properties of matter are modified by mixing the molecular transitions with light modes inside a cavity. Resultant hybrid light-matter states exhibit energy level shifts, are delocalized over many molecular units, and have a different excited-state potential energy landscape, which leads to modified exciton dynamics. Previously, non-Hermitian Hamiltonians have been derived to describe the excited states of molecules coupled to surface plasmons (i.e., plexcitons), and these operators have been successfully used in the description of linear and third order optical response. In this article, we rigorously derive non-Hermitian Hamiltonians in the response function formalism of nonlinear spectroscopy by means of Feshbach operators and apply them to explore spectroscopic signatures of plexcitons. In particular, we analyze the optical response below and above the exceptional point that arises for matching transition energies for plasmon and molecular components and study their decomposition using double-sided Feynman diagrams. We find a clear distinction between interference and Rabi splitting in linear spectroscopy and a qualitative change in the symmetry of the line shape of the nonlinear signal when crossing the exceptional point. This change corresponds to one in the symmetry of the eigenvalues of the Hamiltonian. Our work presents an approach for simulating the optical response of sublevels within an electronic system and opens new applications of nonlinear spectroscopy to examine the different regimes of the spectrum of non-Hermitian Hamiltonians.
RESUMO
Advances in ultrafast spectroscopy can provide access to dynamics involving nontrivial quantum correlations and their evolutions. In coherent 2D spectroscopy, the oscillatory time dependence of a signal is a signature of such quantum dynamics. Here, we study such beating signals in electronic coherent 2D spectroscopy of CdSe quantum dots (CdSe QDs) at 77 K. The beating signals are analyzed in terms of their positive and negative Fourier components. We conclude that the beatings originate from coherent LO-phonons of CdSe QDs. No evidence for the QD size dependence of the LO-phonon frequency was identified.
Assuntos
Compostos de Cádmio , Pontos Quânticos , Compostos de Selênio , Compostos de Cádmio/química , Pontos Quânticos/química , Compostos de Selênio/química , Análise Espectral , TemperaturaRESUMO
Increasing demand for detecting single molecules in challenging environments has raised the bar for the fluorophores used. To achieve better resolution and/or contrast in fluorescence microscopy, it is now essential to use bright and stable dyes with tailored photophysical properties. While long fluorescence lifetime fluorophores offer many advantages in time-resolved imaging, their inherently lower molar absorption coefficient has limited applications in single molecule imaging. Here we propose a generic approach to prepare bright, long fluorescence lifetime dyad fluorophores comprising an absorbing antenna chromophore with high absorption coefficient linked to an acceptor emitter with a long fluorescence lifetime. We introduce a dyad consisting of a perylene antenna and a triangulenium emitter with 100% energy transfer from donor to acceptor. The dyad retained the long fluorescence lifetime (â¼17 ns) and high quantum yield (75%) of the triangulenium emitter, while the perylene antenna increased the molar absorption coefficient (up to 5 times) in comparison to the free triangulenium dye. These triangulenium based dyads with significantly improved brightness can now be detected at the single molecule level and easily discriminated from bright autofluorescence by time-gated and other lifetime-based detection schemes.
RESUMO
Lead-free halide perovskites have triggered interest in the field of optoelectronics and photocatalysis because of their low toxicity, and tunable optical and charge-carrier properties. From an application point of view, it is desirable to develop stable multifunctional lead-free halide perovskites. We have developed a series of Cs2 Ptx Sn1-x Cl6 perovskites (0≤x≤1) with high stability, which show switchable photoluminescence and photocatalytic functions by varying the amount of Pt4+ substitution. A Cs2 Ptx Sn1-x Cl6 solid solution with a dominant proportion of Pt4+ shows broadband photoluminescence with a lifetime on the microsecond timescale. A Cs2 Ptx Sn1-x Cl6 solid solution with a small amount of Pt4+ substitution exhibits photocatalytic hydrogen evolution activity. An optical spectroscopy study reveals that the switch between photoluminescence and photocatalysis functions is controlled by sub-band gap states. Our finding provides a new way to develop lead-free multifunctional halide perovskites with high stability.
RESUMO
The optical and electrochemical properties of a series of polyoxometalate (POM) oxoclusters decorated with two bodipy (boron-dipyrromethene) light-harvesting units were examined. Evaluated here in this polyanionic donor-acceptor system is the effect of the solvent and associated counterions on the intramolecular photoinduced electron transfer. The results show that both solvents and counterions have a major impact upon the energy of the charge-transfer state by modifying the solvation shell around the POMs. This modification leads to a significantly shorter charge separation time in the case of smaller counterion and slower charge recombination in a less polar solvent. These results were rationalized in terms of Marcus theory and show that solvent and counterion both affect the driving force for photoinduced electron transfer and the reorganization energy. This was corroborated with theoretical investigations combining DFT and molecular dynamics simulations.
RESUMO
In this study, the photoelectrochemical behavior of electrodeposited FeNiOOH/Fe2O3/graphene nanohybrid electrodes is investigated, which has precisely controlled structure and composition. The photoelectrode assembly is designed in a bioinspired manner where each component has its own function: Fe2O3 is responsible for the absorption of light, the graphene framework for proper charge carrier transport, while the FeNiOOH overlayer for facile water oxidation. The effect of each component on the photoelectrochemical behavior is studied by linear sweep photovoltammetry, incident photon-to-charge carrier conversion efficiency measurements, and long-term photoelectrolysis. 2.6 times higher photocurrents are obtained for the best-performing FeNiOOH/Fe2O3/graphene system compared to its pristine Fe2O3 counterpart. Transient absorption spectroscopy measurements reveal an increased hole-lifetime in the case of the Fe2O3/graphene samples. Long-term photoelectrolysis measurements in combination with Raman spectroscopy, however, prove that the underlying nanocarbon framework is corroded by the photogenerated holes. This issue is tackled by the electrodeposition of a thin FeNiOOH overlayer, which rapidly accepts the photogenerated holes from Fe2O3, thus eliminating the pathway leading to the corrosion of graphene.
RESUMO
We apply two sparse reconstruction techniques, the least absolute shrinkage and selection operator (LASSO) and the sparse exponential mode analysis (SEMA), to two-dimensional (2D) spectroscopy. The algorithms are first tested on model data, showing that both are able to reconstruct the spectra using only a fraction of the data required by the traditional Fourier-based estimator. Through the analysis of the sparsely sampled experimental fluorescence-detected 2D spectra of LH2 complexes, we conclude that both SEMA and LASSO can be used to significantly reduce the required data, still allowing one to reconstruct the multidimensional spectra. Of the two techniques, it is shown that SEMA offers preferable performance, providing more accurate estimation of the spectral line widths and their positions. Furthermore, SEMA allows for off-grid components, enabling the use of a much smaller dictionary than that of the LASSO, thereby improving both the performance and the lowering of the computational complexity for reconstructing coherent multidimensional spectra.
RESUMO
Lead halide perovskites (LHPs) nanocrystals (NCs), owing to their outstanding photophysical properties, have recently emerged as a promising material not only for solar cells but also for lighting and display applications. The photophysical properties of these materials can be further improved by chemical engineering such as cation exchange. Hot carrier (HC) cooling, as one of the key photophysical processes in LHPs, can strongly influence performance of LHPs NCs based devices. Here, we study HC relaxation dynamics in LHP NCs with cesium (Cs), methylammonium (MA, CH3NH3+), and formamidinium (FA, CH(NH2)2+) cations by using femtosecond transient absorption spectroscopy. The LHP NCs show excitation intensity and excitation energy-dependent HC cooling. We investigate the details of HC cooling in CsPbBr3, MAPbBr3, and FAPbBr3 at three different excitation energies with low excitation intensity. It takes longer time for the HCs at high energy to relax (cool) to the band edge, compared to the HCs generated by low excitation energy. At the same excitation energy (350 nm, 3.54 eV), all the three LHP NCs show fast HC relaxation (<0.4 ps) with the cooling time and rate in the following order: CsPbBr3 (0.39 ps, 2.9 meV/fs) > MAPbBr3 (0.27 ps, 4.6 meV/fs) > FAPbBr3 (0.21 ps, 5.8 meV/fs). The cation dependence can be explained by stronger interaction between the organic cations with the Pb-Br frameworks compared to the Cs. The revealed cation-dependent HC relaxation process is important for providing cation engineering strategies for developing high performance LHP devices.
RESUMO
Although significant improvements have been achieved for organic photovoltaic cells (OPVs), the top-performing devices still show power conversion efficiencies far behind those of commercialized solar cells. One of the main reasons is the large driving force required for separating electron-hole pairs. Here, we demonstrate an efficiency of 14.7% in the single-junction OPV by using a new polymer donor PTO2 and a nonfullerene acceptor IT-4F. The device possesses an efficient charge generation at a low driving force. Ultrafast transient absorption measurements probe the formation of loosely bound charge pairs with extended lifetime that impedes the recombination of charge carriers in the blend. The theoretical studies reveal that the molecular electrostatic potential (ESP) between PTO2 and IT-4F is large, and the induced intermolecular electric field may assist the charge generation. The results suggest OPVs have the potential for further improvement by judicious modulation of ESP.
Assuntos
Fontes de Energia Elétrica , Compostos Orgânicos/química , Energia Solar , Eletricidade Estática , Transporte de Elétrons , Fulerenos/química , Modelos Moleculares , Conformação Molecular , Polímeros/químicaRESUMO
Dion-Jacobson (DJ) type 2D perovskites with a single organic cation layer exhibit a narrower distance between two adjacent inorganic layers compared to the corresponding Ruddlesden-Popper perovskites, which facilitates interlayer charge transport. However, the internal crystal structures in 2D DJ perovskites remain elusive. Herein, in a p-xylylenediamine (PDMA)-based DJ perovskite bearing bifunctional NH3 + spacer, the compression from confinement structure (inorganic layer number, n = 1, 2) to nonconfinement structure (n > 3) with the decrease of PDMA molar ratio is unraveled. Remarkably, the nonconfined perovskite displays shorter spacing between 2D quantum wells, which results in a lower exciton binding energy and hence promotes exciton dissociation. The significantly diminishing quantum confinement promotes interlayer charge transport leading to a maximum photovoltaic efficiency of ≈11%. Additionally, the tighter interlayer packing arising from the squeezing of inorganic octahedra gives rise to enhanced ambient stability.
RESUMO
Fano interferences in nanostructures are influenced by dissipation effects as well as many-body interactions. Two-dimensional coherent spectroscopies have just begun to be applied to these systems where the spectroscopic signatures of a discrete-continuum structure are not known. In this article, we calculate the excited-state absorption contribution for different models of higher lying excited states. We find that the characteristic asymmetry of one-dimensional spectroscopies is recovered from the many-body contributions and that the higher lying excited manifolds have distorted lineshapes that are not anticipated from discrete-level Hamiltonians. We show that the Stimulated Emission cannot have contributions from a flat continuum of states. This work completes the Ground-State Bleach and Stimulated Emission signals that were calculated previously [D. Finkelstein-Shapiro et al., Phys. Rev. B 94, 205137 (2016)]. The model reproduces the observations reported for molecules on surfaces probed by 2DIR.
RESUMO
Förster theory describes electronic exciton energy migration in molecular assemblies as an incoherent hopping process between donor and acceptor molecules. The rate is expressed in terms of the overlap integral between donor fluorescence and acceptor absorption spectra. Typical time scales for systems like photosynthetic antennae are on the order of a few picoseconds. Prior to transfer, it is assumed that the initially excited donor molecule has equilibrated with respect to the local environment. However, upon excitation and during the equilibration phase, the state of the system needs to be described by the full density matrix, including coherences between donor and acceptor states. While being intuitively clear, addressing this regime experimentally has been a challenge until the recently reported advances in fluorescence detected two-dimensional spectroscopy. Here, we demonstrate using fourth order perturbation theory the conditions for the presence of donor-acceptor coherence induced cross-peaks at zero waiting time between the first and the second pair of pulses. The approach is illustrated for a heterodimer model which facilitates an analytical solution.
Assuntos
Técnicas de Química Analítica/instrumentação , Modelos Químicos , Espectrometria de Fluorescência , Inativação Luminosa Assistida por Cromóforo , Fluorescência , Compostos Orgânicos/químicaRESUMO
Organo-metal halide perovskites have recently obtained world-wide attention as promising solar cell materials. They have broad and strong light absorption along with excellent carrier transport properties which partially explain their record power conversion efficiencies above 22%. However, the basic understanding of the underlying physical mechanisms is still limited and there remain large discrepancies among reported transport characteristics of perovskite materials. Notably, the carrier mobility of perovskite samples either in thin films or within solar cells obtained using different techniques can vary by up to 7-8 orders of magnitude. This tutorial review aims to offer insights into the scope, advantages, limitations and latest developments of the techniques that have been applied for studying charge carrier dynamics in perovskites. We summarize a comprehensive set of measurements including (1) time-resolved laser spectroscopies (transient absorption, time-resolved photoluminescence, terahertz spectroscopy and microwave conductivity); (2) electrical transient techniques (charge extraction by linearly increasing voltage and time-of-flight); and (3) steady-state methods (field-effect transistor, Hall effect and space charge limited current). Firstly, the basics of the above measurements are described. We then comparatively summarize the charge carrier characteristics of perovskite-based neat films, bilayer films and solar cells. Finally, we compare the different approaches in evaluating the key parameters of transport dynamics and unravel the reasons for the large discrepancies among these methods. We anticipate that this tutorial review will serve as the entry point for understanding the experimental results from the above techniques and provide insights into charge carrier dynamics in perovskite materials and devices.
RESUMO
Lead-free perovskite nanocrystals (NCs) were obtained mainly by substituting a Pb2+ cation with a divalent cation or substituting three Pb2+ cations with two trivalent cations. The substitution of two Pb2+ cations with one monovalent Ag+ and one trivalent Bi3+ cations was used to synthesize Cs2 AgBiX6 (X=Cl, Br, I) double perovskite NCs. Using femtosecond transient absorption spectroscopy, the charge carrier relaxation mechanism was elucidated in the double perovskite NCs. The Cs2 AgBiBr6 NCs exhibit ultrafast hot-carrier cooling (<1â ps), which competes with the carrier trapping processes (mainly originate from the surface defects). Notably, the photoluminescence can be increased by 100 times with surfactant (oleic acid) added to passivate the defects in Cs2 AgBiCl6 NCs. These results suggest that the double perovskite NCs could be potential materials for optoelectronic applications by better controlling the surface defects.
RESUMO
Photoinitiated charge carrier dynamics in ZnO nanoparticles sensitized by CdSe quantum dots is studied using transient absorption spectroscopy and time-resolved terahertz spectroscopy. The evolution of the transient spectra shows that electron injection occurs in a two-step process, where the formation of a charge transfer state (occurring in several picoseconds) is followed by its dissociation within tens of picoseconds. The photoconductivity of electrons injected into the ZnO nanoparticles is lower than that of charges photogenerated directly in ZnO. We conclude that the motion of injected electrons in ZnO nanoparticles is strongly influenced by their interaction with positive charges left in the sensitizing quantum dots.
RESUMO
Lead-based perovskite nanocrystals (NCs) have outstanding optical properties and cheap synthesis conferring them a tremendous potential in the field of optoelectronic devices. However, two critical problems are still unresolved and hindering their commercial applications: one is the fact of being lead-based and the other is the poor stability. Lead-free all-inorganic perovskite Cs3 Bi2 X9 (X=Cl, Br, I) NCs are synthesized with emission wavelength ranging from 400 to 560â nm synthesized by a facile room temperature reaction. The ligand-free Cs3 Bi2 Br9 NCs exhibit blue emission with photoluminescence quantum efficiency (PLQE) about 0.2 %. The PLQE can be increased to 4.5 % when extra surfactant (oleic acid) is added during the synthesis processes. This improvement stems from passivation of the fast trapping process (2-20â ps). Notably, the trap states can also be passivated under humid conditions, and the NCs exhibited high stability towards air exposure exceeding 30â days.