Tuning Interfacial Chemistry to Direct the Electrosynthesis of Metal Oxide Semiconductors.

ConspectusMetal oxide semiconductors have many features that make them attractive for both fundamental and applied studies. For example, these compounds contain elements (e.g., Fe, Cu, Ti, etc.) that are derived from minerals rendering them earth-abundant and, most often, are also not toxic. Therefore, they have been examined for possible applicability in a very diverse range of technological applications including photovoltaic solar cells, charge storage devices, displays, smart windows, touch screens, etc. The fact that metal oxide semiconductors have both n- and p-type conductivity makes them amenable for use as hetero- or homojunctions in microelectronic devices and as photoelectrodes in solar water-splitting devices. This Account presents a review of collaborative research on the electrosynthesis of metal oxides from our respective groups against the backdrop of key developments on this topic. The many variants that interfacial chemical modification schemes offer are shown herein to lead to the targeted synthesis of a wide array of not only simple binary metal oxides but also more complex chemistries involving multinary compound semiconductors and alloys.This Account presents our perspective on how parallel developments in the understanding of and ability to manipulate electrode-electrolyte interfaces have correspondingly enabled the innovation of a broad array of electrosynthetic strategies. These coupled with the advent of versatile tools to probe interfacial processes (undoubtedly, a child of the nanotechnology "revolution") afford an operando examination of how effective the strategies are to secure the targeted metal oxide product as well as the mechanistic nuances. Flow electrosynthesis, for example, removes many of the complications accruing from the accumulation of interfering side products─veritably, this is an Achilles heel of the electrosynthesis approach. Coupling flow electrosynthesis with downstream analysis tools based on spectroscopic or electroanalytical probes opens up the possibility of immediate process feedback and optimization. The combination of electrosynthesis, stripping voltammetry, and electrochemical quartz crystal nanogravimetry (EQCN), either in a static or in a dynamic (flow) platform, is shown below to offer intriguing possibilities for metal oxide electrosynthesis. While many of the examples below are based on our current and recent research and in other laboratories, unlocking even more potential will hinge on future refinements and innovations that surely are around the corner.

Solution Combustion Synthesis and Characterization of Magnesium Copper Vanadates.

Magnesium vanadate (MgV2O6) and its alloys with copper vanadate were synthesized via the solution combustion technique. Phase purity and solid solution formation were confirmed by a variety of experimental techniques, supported by electronic structure simulations based on density functional theory (DFT). Powder X-ray diffraction combined with Rietveld refinement, laser Raman spectroscopy, diffuse reflectance spectroscopy, and high-resolution transmission electron microscopy showed single-phase alloy formation despite the MgV2O6 and CuV2O6 end members exhibiting monoclinic and triclinic crystal systems, respectively. DFT-calculated optical band gaps showed close agreement in the computed optical bandgaps with experimentally derived values. Surface photovoltage spectroscopy, ambient-pressure photoemission spectroscopy, and Kelvin probe contact potential difference (work function) measurements confirmed a systematic variation in the optical bandgap modification and band alignment as a function of stoichiometry in the alloy composition. These data indicated n-type semiconductor behavior for all the samples which was confirmed by photoelectrochemical measurements.

Electrodeposition of Silver Vanadate Films: A Tale of Two Polymorphs.

Two polymorphs of AgVO3 , namely the α- and ß- forms, were prepared and their physical, structural, optical, electrochemical, and photoelectrochemical characteristics were compared using a battery of experimental and theoretical tools. A two-step method, previously developed in the our laboratory for the electrodeposition of inorganic semiconductor films, was applied to the electrosynthesis of silver vanadate (AgVO3 ) films on transparent, conducting oxide surfaces. In the first step, silver was cathodically deposited from a non-aqueous bath containing silver nitrate. In the second step, the silver film was anodically stripped in an aqueous medium containing ammonium metavanadate. The anodically generated silver ions at the interface underwent a precipitation reaction with the vanadate species to generate the desired product in situ. Each of these steps were mechanistically corroborated via the use of electrochemical quartz crystal microgravimetry, used in conjunction with voltammetry and coulometry. As-deposited films were crystalline and showed p-type semiconductor behavior. Theoretical insights are provided for the electronic origin of the αâ†’ß phase transformation in AgVO3 and the disparate optical band gaps of the two polymorphs. Finally, implications for the application of this material in solar cells are provided.

Role of f Electrons in the Optical and Photoelectrochemical Behavior of Ca(La1- xCe x)2S4 (0 ≤ x ≤ 1).

This study focuses on a solid solution series, Ca(La1- xCe x)2S4 (0 ≤ x ≤ 1), where the f electron density is absent in CaLa2S4 and is progressively increased until it is maximized in CaCe2S4. Correspondingly, these samples, synthesized by a sealed ampule method, showed progressive variations in color ranging from gray for CaLa2S4 to orange-red for CaCe2S4. The crystal structural nuances of both the end members and three solid solutions with x = 0.25, 0.50, and 0.75 were established with the complementary use of synchrotron X-ray diffraction and neutron scattering. Interestingly, these data were consistent with a two-phase composition centered around each nominal solid solution stoichiometry. Optical characterization via diffuse reflectance spectroscopy and Tauc analyses showed a shrinking of the energy band gap (from the UV to vis range) when Ce was progressively introduced into the host CaLa2S4 structure. These data were in concert with electronic band structure calculations, using density functional theory, which showed the progressive formation of an intermediate f band when Ce was introduced intro the structure. Photoelectrochemical measurements in an aqueous redox electrolyte, as well as surface photovoltage and Kelvin probe measurements, revealed all samples to be n-type semiconductors. The valence and conduction band edge positions of the end members and the three solid solutions could be mapped, on both the redox and vacuum reference energy scales, by combining these measurements with the optical data.

Improved rate of substrate oxidation catalyzed by genetically-engineered myoglobin.

This study showcases the potential of unnatural amino acids to enable non-natural functions when incorporated in the protein scaffold of heme metalloproteins. For this purpose, a genetically-engineered myoglobin (Mb) mutant was created by incorporating redox-active 3-amino-l-tyrosine (NH2Tyr) into its active site, replacing the distal histidine (H64) with NH2Tyr. In peroxide-shunt assays, this variant exhibits an increased rate of turnover for thioanisole and benzaldehyde oxidation as compared to the wild-type (WT) Mb. Indeed, in the presence of excess hydrogen peroxide (H2O2), a 9-fold and 81-fold increase in activity was observed over multiple turnovers for thioanisole sulfoxidation and benzoic acid formation, respectively. The increased oxidation activity in the H64NH2Tyr Mb mutant underlined the role of NH2Tyr in the distal active-site scaffold in peroxide activation. Kinetic, electrochemical, and EPR spectroscopic experiments were performed. On the basis of these studies, it is argued that the single NH2Tyr residue within the Mb variant simultaneously serves the role of the conserved His/Arg-pair within the distal pocket of horseradish peroxidase.

Enhanced Photoelectrochemical Performance of Cuprous Oxide/Graphene Nanohybrids.

Combination of an oxide semiconductor with a highly conductive nanocarbon framework (such as graphene or carbon nanotubes) is an attractive avenue to assemble efficient photoelectrodes for solar fuel generation. To fully exploit the possible synergies of the hybrid formation, however, precise knowledge of these systems is required to allow rational design and morphological engineering. In this paper, we present the controlled electrochemical deposition of nanocrystalline p-Cu2O on the surface of different graphene substrates. The developed synthetic protocol allowed tuning of the morphological features of the hybrids as deduced from electron microscopy. (Photo)electrochemical measurements (including photovoltammetry, electrochemical impedance spectroscopy, photocurrent transient analysis) demonstrated better performance for the 2D graphene containing photoelectrodes, compared to the bare Cu2O films, the enhanced performance being rooted in suppressed charge carrier recombination. To elucidate the precise role of graphene, comparative studies were performed with carbon nanotube (CNT) films and 3D graphene foams. These studies revealed, after allowing for the effect of increased surface area, that the 3D graphene substrate outperformed the other two nanocarbons. Its interconnected structure facilitated effective charge separation and transport, leading to better harvesting of the generated photoelectrons. These hybrid assemblies are shown to be potentially attractive candidates in photoelectrochemical energy conversion schemes, namely CO2 reduction.

Flavin Derivatives with Tailored Redox Properties: Synthesis, Characterization, and Electrochemical Behavior.

This study establishes structure-property relationships for four synthetic flavin molecules as bioinspired redox mediators in electro- and photocatalysis applications. The studied flavin compounds were disubstituted with polar substituents at the N1 and N3 positions (alloxazine) or at the N3 and N10 positions (isoalloxazines). The electrochemical behavior of one such synthetic flavin analogue was examined in detail in aqueous solutions of varying pH in the range from 1 to 10. Cyclic voltammetry, used in conjunction with hydrodynamic (rotating disk electrode) voltammetry, showed quasi-reversible behavior consistent with freely diffusing molecules and an overall global 2e(-) , 2H(+) proton-coupled electron transfer scheme. UV/Vis spectroelectrochemical data was also employed to study the pH-dependent electrochemical behavior of this derivative. Substituent effects on the redox behavior were compared and contrasted for all the four compounds, and visualized within a scatter plot framework to afford comparison with prior knowledge on mostly natural flavins in aqueous media. Finally, a preliminary assessment of one of the synthetic flavins was performed of its electrocatalytic activity toward dioxygen reduction as a prelude to further (quantitative) studies of both freely diffusing and tethered molecules on various electrode surfaces.

Enhanced photocatalytic activity of a self-stabilized synthetic flavin anchored on a TiO2 surface.

Synthetic flavin molecules were anchored on Degussa P25 titanium dioxide (TiO2). The effect of their presence on the photocatalytic (PC) activity of TiO2 was studied. Under UV light, an increase in the degradation rate of ethanol was observed. This increase was accompanied by stabilization of the anchored flavin against self-degradation. The unprecedented stabilization effect was found also in the absence of a reducing agent such as ethanol. In contrast, under the less energetic visible light, fast degradation of the anchored flavin was observed. These rather surprising observations were attributed to the propensity for charge transport from excited flavin molecules to the semiconductor and to the role that such charge transfer may play in stabilizing the overall assembly. Anchored flavins excited by UV light to their S2, S3 electronic states were able to transfer the excited electrons to the TiO2 phase whereas anchored flavin molecules that were excited by visible light to the S1 state were less likely to transfer the photo-excited electrons and therefore were destabilized. These findings may be relevant not only to anchored flavins in general but to other functionalized photocatalysts, and may open up new vistas in the implementation of sensitizers in PC systems.

Correction: Enhanced photocatalytic activity of a self-stabilized synthetic flavin anchored on a TiO2 surface.

Correction for 'Enhanced photocatalytic activity of a self-stabilized synthetic flavin anchored on a TiO2 surface' by Manjula Pandiri et al., Phys. Chem. Chem. Phys., 2016, 18, 18575-18583.

Synthesis of Au-BiVO4 nanocomposite through anodic electrodeposition followed by galvanic replacement and its application to the photocatalytic decomposition of methyl orange.

A Au-BiVO(4) nanocomposite is synthesized by a two-step strategy involving anodic electrodeposition combined with in situ galvanic replacement. First, a BiVO(4) layer is prepared by the anodic oxidation of pre-electrodeposited Bi film in a VO(4)(3-) containing electrolyte. Thus-prepared BiVO(4) film contains excess metallic Bi, which is then galvanically replaced with Au from an aqueous HAuCl(4) solution, resulting in the Au-BiVO(4) composite in the second step. Optical, photoelectrochemical and photocatalytic properties are investigated by using X-ray diffraction, energy-dispersive X-ray analysis, diffuse reflectance spectrometry, and photoelectrochemical analyses. The visible-light photocatalytic activity of the Au-BiVO(4) composite is evaluated using the decomposition of methyl orange dye and is superior to the bare BiVO(4) film counterpart.

Tailoring copper oxide semiconductor nanorod arrays for photoelectrochemical reduction of carbon dioxide to methanol.

Solar photoelectrochemical reduction of carbon dioxide to methanol in aqueous media was driven on hybrid CuO/Cu2O semiconductor nanorod arrays for the first time. A two-step synthesis was designed and demonstrated for the preparation of these hybrid copper oxide one-dimensional nanostructures on copper substrates. The first step consisted in the growth of CuO nanorods by thermal oxidation of a copper foil at 400 °C. In the second step, controlled electrodeposition of p-type Cu2O crystallites on the CuO walls was performed. The resulting nanorod morphology with controllable wall thickness by adjusting the Cu2O electrodeposition time as well as their surface/bulk chemical composition were probed by scanning electron microscopy, X-ray diffraction and Raman spectroscopy. Photoelectrosynthesis of methanol from carbon dioxide was demonstrated at -0.2 V vs SHE under simulated AM1.5 solar irradiation on optimized hybrid CuO/Cu2O nanorod electrodes and without assistance of any homogeneous catalyst (such as pyridine or imidazole) in the electrolyte. The hybrid composition, ensuring double pathway for photoelectron injection to CO2, along with high surface area were found to be crucial for efficient performance in methanol generation under solar illumination. Methanol formation, tracked by gas chromatography/mass spectrometry, indicated Faradaic efficiencies of ~95%.

Biosynthetic approach for functional protein microarrays.

Protein microarrays have emerged as an indispensable research tool for providing information about protein functions and interactions through high-throughput screening. Traditional methods for immobilizing biomolecules onto solid surfaces have been based on covalent and noncovalent binding, entrapment in semipermeable membranes, microencapsulation, sol gel, and hydrogel methods. Each of these techniques has its own strengths but fails to combine the most important tenets of a functional protein microarray such as covalent attachment, native protein conformation, homogeneity of the protein monolayer, control over active site orientation, and retention of protein activity. Here we present a selective and site-directed covalent immobilization technique for proteins via a benzoxazine ring formation through a Diels-Alder reaction in water and a genetically encoded 3-amino-L-tyrosine (3-NH(2)Tyr) amino acid. Fully functional protein microarrays, with monolayer arrangements and complete control over their orientations, were generated using this strategy.

Photocatalytic generation of syngas using combustion-synthesized silver bismuth tungstate.

Silver bismuth tungstate (AgBiW(2)O(8)) nanoparticles were prepared for the first time by solution combustion synthesis by using the corresponding metal nitrates as the precursor and urea as the fuel. These nanoparticles were subsequently modified with Pt catalyst islands using a photocatalytic procedure and used for the photogeneration of syngas (CO+H(2)). Formic acid was used for this purpose for the in situ generation of CO(2) and its subsequent reduction to CO. In the absence of Pt modification, H(2) was not obtained in the gas products evolved. These results were compared with those obtained with acetic acid in place of formic acid. The combustion process was simulated by thermogravimetry and the synthesized powder was characterized using transmission electron microscopy, diffuse reflectance UV/Vis spectroscopy, X-ray diffraction, surface area measurements, and X-ray photoelectron spectroscopy. Tauc plots derived from the diffuse reflectance data yielded an optical band gap of 2.74 eV. The photocatalytic activity of these nanoparticles was superior to a sample prepared by solid-state synthesis. Mechanistic aspects are finally presented, as are structural models and electronic calculations, using density functional theory (DFT).

Arc Synthesis, Crystal Structure, and Photoelectrochemistry of Copper(I) Tungstate.

A little-studied p-type ternary oxide semiconductor, copper(I) tungstate (Cu2WO4), was assessed by a combined theoretical/experimental approach. A detailed computational study was performed to solve the long-standing debate on the space group of Cu2WO4, which was determined to be triclinic P1. Cu2WO4 was synthesized by a time-efficient, arc-melting method, and the crystalline reddish particulate product showed broad-band absorption in the UV-visible spectral region, thermal stability up to ∼260 °C, and cathodic photoelectrochemical activity. Controlled thermal oxidation of copper from the Cu(I) to Cu(II) oxidation state showed that the crystal lattice could accommodate Cu2+ cations up to ∼260 °C, beyond which the compound was converted to CuO and CuWO4. This process was monitored by powder X-ray diffraction and X-ray photoelectron spectroscopy. The electronic band structure of Cu2WO4 was contrasted with that of the Cu(II) counterpart, CuWO4 using spin-polarized density functional theory (DFT). Finally, the compound Cu2WO4 was determined to have a high-lying (negative potential) conduction band edge underlining its promise for driving energetic photoredox reactions.

Electrochemical grafting of poly(3,4-ethylenedioxythiophene) into a titanium dioxide nanotube host network.

This study focuses on electrodeposition for infiltrating in situ a conducting polymer such as poly(3,4-ethylenedioxythiophene) (PEDOT) into a host titanium dioxide (TiO(2)) nanotube array (NTA) framework. The TiO(2) NTA was electrosynthesized on titanium foil in turn by anodization in a fluoride-containing medium. The PEDOT layer was electrografted into the TiO(2) NTA framework using a two-step potentiostatic growth protocol in acetonitrile containing supporting electrolyte. The nanoscopic features of oligomer/polymer infiltration and deposition in the NTA interstitial voids were monitored by field-emission scanning electron microscopy. Systematic changes in the nanotube inner diameter and the wall thickness afforded insights into the evolution of the TiO(2)NTA/PEDOT hybrid assembly. This assembly was subsequently characterized by UV-visible diffuse reflectance, cyclic voltammetry, and photoelectrochemical measurements. These data serve as a prelude to further use of these hybrids in heterojunction solar cells.

Combustion synthesis and characterization of nanocrystalline WO3.

The energy payback time associated with the semiconductor active material is an important parameter in a photovoltaic solar cell device. Thus lowering the energy requirements for the semiconductor synthesis step or making it more energy-efficient is critical toward making the overall device economics more competitive relative to other nonpolluting energy options. In this communication, combustion synthesis is demonstrated to be a versatile and energy-efficient method for preparing inorganic oxide semiconductors such as tungsten trioxide (WO3) for photovoltaic or photocatalytic solar energy conversion. The energy efficiency of combustion synthesis accrues from the fact that high process temperatures are self-sustained by the exothermicity of the combustion process, and the only external thermal energy input needed is for dehydration of the fuel/oxidizer precursor mixture and bringing it to ignition. Importantly, we show that, in this approach, it is also possible to tune the optical characteristics of the oxide semiconductor (i.e., shift its response toward the visible range of the electromagnetic spectrum) in situ by doping the host semiconductor during the formative stage itself. As a bonus, the resultant material shows enhanced surface properties such as markedly improved organic dye uptake relative to benchmark samples obtained from commercial sources. Finally, this synthesis approach requires only very simple equipment, a feature that it shares with other "mild" inorganic semiconductor synthesis routes such as sol-gel chemistry, chemical bath deposition, and electrodeposition. The present study constitutes the first use of combustion synthesis for preparing WO3 powder comprising nanosized particles.

Formation and characterization of self-organized TiO2 nanotube arrays by pulse anodization.

This paper describes TiO2 nanotube arrays prepared by anodic oxidation of Ti substrates using pulse voltage waveforms. Voltages were pulsed between 20 and -4 V or between 20 and 0 V with varying durations from 2 to 16 s at the lower limit of the pulse waveform. Ammonium fluoride or sodium fluoride (and mixtures of both) was used as the electrolyte with or without added medium modifier (glycerol, ethylene glycol, or poly (ethylene glycol) (PEG 400)) in these experiments. The pulse waveform was optimized to electrochemically grow TiO2 nanotubes and chemically etch their walls during its cathodic current flow regime. The resultant TiO2 nanotube arrays showed a higher quality of nanotube array morphology and photoresponse than samples grown via the conventional continuous anodization method. Films grown with a 20 V/-4 V pulse sequence and pulse duration of 2 s at its negative voltage limit afforded a superior photoresponse compared to other pulse durations. Specifically, the negative voltage limit of the pulse (-4 V) and its duration promote the adsorption of NH4+ species that in turn inhibits chemical attack of the growing oxide nanoarchitecture by the electrolyte F- species. The longer the period of the pulse at the negative voltage limit, the thicker the nanotube walls and the shorter the nanotube length. At variance, with 0 V as the low voltage limit, the longer the pulse duration, the thinner the oxide nanotube wall, suggesting that chemical attack by fluoride ions is not counterbalanced by NH3/NH4+ species adsorption, unlike the interfacial situation prevailing at -4 V. Finally, the results from this study provide useful evidence in support of existing mechanistic models for anodic growth and self-assembly of oxide nanotube arrays on the parent metal surface.

Compositional analysis of electrodeposited bismuth telluride thermoelectric thin films using combined electrochemical quartz crystal microgravimetry--stripping voltammetry.

Bismuth telluride (Bi 2Te 3 ) is a benchmark material for thermoelectric power generation and cooling applications. Electrodeposition is a versatile technique for preparing thin films of this material; however, it affords films of variable composition depending on the preparation history. A simple and rapid assay of electrodeposited films, therefore, has both fundamental and practical importance. In this study, a new protocol for the electroanalysis of Bi 2Te 3 thin films is presented by combining the two powerful and complementary techniques of electrochemical quartz crystal microgravimetry (EQCM) and stripping voltammetry. First, any free (and excess) tellurium in the electrodeposited film was reduced to soluble Te ( 2- ) species by scanning to negative potentials in a 0.1 M Na 2SO 4 electrolyte, and the accompanying frequency increase (mass loss) was used to determine the content of free tellurium. The film was again subjected to cathodic stripping in the same medium (to generate Bi (0) and soluble Te (2-) from the Bi 2 Te 3 film component of interest), and the EQCM frequency change was used to determine the content of chemically bound Te in the Bi 2Te 3 thin film and thereby the compound stoichiometry. Finally, the EQCM frequency change during Bi oxidation to Bi (3+) and the difference between total Bi and Bi in Bi 2Te 3 resulted in the assay of free (excess) Bi in the electrodeposited film. Problems associated with the chemical/electrochemical stability of the free Bi species were circumvented by a flow electroanalysis approach. Data are also presented on the sensitivity of electrodeposited Bi 2Te 3 film composition to the electrodeposition potential. This newly developed method can be used for the compositional analysis of other thermoelectric thin-film material candidates in general.