Factors influencing success rate of ceramic veneers on endodontically treated anterior teeth: A systematic review.

STATEMENT OF PROBLEM: More conservative restorative approaches have been advocated for nonvital anterior teeth as an alternative to complete coverage crowns to maximize the preservation of tooth structure. Systematic reviews that investigated factors influencing the success rate of porcelain veneers on endodontically treated anterior teeth are lacking. PURPOSE: The purpose of this systematic review was to investigate factors influencing the success rate of porcelain veneers on endodontically treated anterior teeth. MATERIAL AND METHODS: Searches were performed across Medline/PubMed, Google Scholar, Scopus, and Web of Science electronic databases. In addition, articles were hand searched from references of systematic reviews concerning porcelain veneers and endodontically treated teeth. RESULTS: After screening and applying the eligibility, inclusion, and exclusion criteria, 7 articles met the inclusion criteria. Factors that could positively influence the success rate of endodontically treated anterior veneered teeth were immediate dentin sealing, labially positioning of the endodontic access cavity, and incorporating fiber posts. CONCLUSIONS: The use of fiber posts and labial positioning of the endodontic access cavity could positively influence the success rate of porcelain veneers on endodontically treated teeth. The effect of immediate dentin sealing on the survival rate of endodontically treated veneered teeth is still unclear and further research is needed.

Correction: Mansoor et al. Effect of Currently Available Nanoparticle Synthesis Routes on Their Biocompatibility with Fibroblast Cell Lines. Molecules 2022, 27, 6972.

The authors wish to make the following correction to this paper [...].

A critical review of in vitro research methodologies used to study mineralization in human dental pulp cell cultures.

BACKGROUND: The pulp contains a resident population of stem cells which can be stimulated to differentiate in order to repair the tooth by generating a mineralized extracellular matrix. Over recent decades there has been considerable interest in utilizing in vitro cell culture models to study dentinogenesis, with the aim of developing regenerative endodontic procedures, particularly where some vital pulp tissue remains. OBJECTIVES: The purpose of this review is to provide a structured oversight of in vitro research methodologies which have been used to study human pulp mineralization processes. METHOD: The literature was screened in the PubMed database up to March 2021 to identify manuscripts reporting the use of human dental pulp cells to study mineralization. The dataset identified 343 publications initially which were further screened and consequently 166 studies were identified and it was methodologically mined for information on: i) study purpose, ii) source and characterization of cells, iii) mineralizing supplements and concentrations, and iv) assays and markers used to characterize mineralization and differentiation, and the data was used to write this narrative review. RESULTS: Most published studies aimed at characterizing new biological stimulants for mineralization as well as determining the effect of scaffolds and dental (bio)materials. In general, pulp cells were isolated by enzymatic digestion, although the pulp explant technique was also common. For enzymatic digestion, a range of enzymes and concentrations were utilized, although collagenase type I and dispase were the most frequent. Isolated cells were not routinely characterized using either fluorescence-activated cell sorting (FACS) and magnetic-activated cell sorting (MACS) approaches and there was little consistency in terming cultures as dental pulp cells or dental pulp stem cells. A combination of media supplements, at a range of concentrations, of dexamethasone, ascorbic acid and beta-glycerophosphate, were frequently applied as the basis for the experimental conditions. Alizarin Red S (ARS) staining was the method of choice for assessment of mineralization at 21-days. Alkaline phosphatase assay was relatively frequently applied, solely or in combination with ARS staining. Further assessment of differentiation status was performed using transcript or protein markers, with dentine sialophosphoprotein (DSPP), osteocalcin and dentine matrix protein-1 (DMP -1), the most frequent. DISCUSSION: While this review highlights variability among experimental approaches, it does however identify a consensus experimental approach. CONCLUSION: Standardization of experimental conditions and sustained research will significantly benefit endodontic patient outcomes in the future.

Effect of Currently Available Nanoparticle Synthesis Routes on Their Biocompatibility with Fibroblast Cell Lines.

Nanotechnology has acquired significance in dental applications, but its safety regarding human health is still questionable due to the chemicals utilized during various synthesis procedures. Titanium nanoparticles were produced by three novel routes, including Bacillus subtilis, Cassia fistula and hydrothermal heating, and then characterized for shape, phase state, size, surface roughness, elemental composition, texture and morphology by SEM, TEM, XRD, AFM, DRS, DLS and FTIR. These novel titanium nanoparticles were tested for cytotoxicity through the MTT assay. L929 mouse fibroblast cells were used to test the cytotoxicity of the prepared titanium nanoparticles. Cell suspension of 10% DMEM with 1 × 104 cells was seeded in a 96-well plate and incubated. Titanium nanoparticles were used in a 1 mg/mL concentration. Control (water) and titanium nanoparticles stock solutions were prepared with 28 microliters of MTT dye and poured into each well, incubated at 37 °C for 2 h. Readings were recorded on day 1, day 15, day 31, day 41 and day 51. The results concluded that titanium nanoparticles produced by Bacillus subtilis remained non-cytotoxic because cell viability was >90%. Titanium nanoparticles produced by Cassia fistula revealed mild cytotoxicity on day 1, day 15 and day 31 because cell viability was 60−90%, while moderate cytotoxicity was found at day 41 and day 51, as cell viability was 30−60%. Titanium nanoparticles produced by hydrothermal heating depicted mild cytotoxicity on day 1 and day 15; moderate cytotoxicity on day 31; and severe cytotoxicity on day 41 and day 51 because cell viability was less than 30% (p < 0.001). The current study concluded that novel titanium nanoparticles prepared by Bacillus subtilis were the safest, more sustainable and most biocompatible for future restorative nano-dentistry purposes.

Extraction of Hydroxyapatite from Camel Bone for Bone Tissue Engineering Application.

Waste tissues such as mammalian bone are a valuable source from which to extract hydroxyapatite. Camel bone-based hydroxyapatite (CBHA) was extracted from the femur of camel bones using a defatting and deproteinization procedure. The extracted CBHA was mechanically, chemically, physically, morphologically and structurally characterized. Fourier-Transform Infra-Red (FTIR) spectra, Micro-Raman, and X-ray diffraction analysis confirmed successful extraction of hydroxyapatite. The mechanical properties of the CBHA scaffold were measured using a Universal Instron compression tester. Scanning electron microscopy showed the presence of a characteristic interconnected porous architecture with pore diameter ranging from 50-600 µm and micro-computer tomography (Micro-CT) analysis identified a mean porosity of 73.93. Thermogravimetric analysis showed that the CBHA was stable up to 1000 °C and lost only 1.435% of its weight. Inductively coupled plasma-mass spectrometry (ICP-MS) and Energy-dispersive-X-ray (EDX) analysis demonstrated the presence of significant amounts of calcium and phosphorus and trace ions of sodium, magnesium, zinc, lead and strontium. Following 21 days of incubation in simulated body fluid (SBF), the pH fluctuated between 10-10.45 and a gradual increase in weight loss was observed. In conclusion, the extracted CBHA is a promising material for future use in bone tissue regeneration applications.

Working characteristics for practising dental hygienists in two countries in different hemispheres.

OBJECTIVES: The study aimed to collect and compare practising characteristics for dental hygienists (DHs) in New Zealand (NZ) and Sweden. METHODS: Dental hygienists from NZ and Sweden were invited to participate in an anonymous online survey focussing on their working practices. An email, with a link to the online survey and a participant information sheet, was sent to DHs registered with their professional association in their respective country. Frequency analyses and cross-tabulations were conducted using chi-square and Fisher's exact tests to investigate possible statistical associations to allow for comparisons between the countries. RESULTS: DH is a female-dominated workforce with equal distribution of gender in both countries. The majority of DHs in NZ worked in private practice while Swedish DHs mostly worked in the public sector. NZ participants were younger and with a more recent qualification than their Swedish counterparts. The highest degree of education was a PhD for DHs working in Sweden, compared with a master's degree for NZ participants. The majority of participants from both countries treated patients 65 years of age or older, with the most common medical conditions being cardiovascular disease and diabetes mellitus. The most common dental condition observed/treated was periodontal disease. Over 60% agreed to have an understanding of information technology (IT). The most used technical equipment was digital radiology, followed by other diagnostic tools. CONCLUSION: Findings confirm previous international data on demographical uptake for the DH workforce in NZ and Sweden. A coherence was seen in patient characteristics, DHs' attitudes towards information technology and use of technical equipment.

Advances in Growth Factor Delivery for Bone Tissue Engineering.

Shortcomings related to the treatment of bone diseases and consequent tissue regeneration such as transplants have been addressed to some extent by tissue engineering and regenerative medicine. Tissue engineering has promoted structures that can simulate the extracellular matrix and are capable of guiding natural bone repair using signaling molecules to promote osteoinduction and angiogenesis essential in the formation of new bone tissues. Although recent studies on developing novel growth factor delivery systems for bone repair have attracted great attention, taking into account the complexity of the extracellular matrix, scaffolding and growth factors should not be explored independently. Consequently, systems that combine both concepts have great potential to promote the effectiveness of bone regeneration methods. In this review, recent developments in bone regeneration that simultaneously consider scaffolding and growth factors are covered in detail. The main emphasis in this overview is on delivery strategies that employ polymer-based scaffolds for spatiotemporal-controlled delivery of both single and multiple growth factors in bone-regeneration approaches. From clinical applications to creating alternative structural materials, bone tissue engineering has been advancing constantly, and it is relevant to regularly update related topics.

Bone Grafts and Substitutes in Dentistry: A Review of Current Trends and Developments.

After tooth loss, bone resorption is irreversible, leaving the area without adequate bone volume for successful implant treatment. Bone grafting is the only solution to reverse dental bone loss and is a well-accepted procedure required in one in every four dental implants. Research and development in materials, design and fabrication technologies have expanded over the years to achieve successful and long-lasting dental implants for tooth substitution. This review will critically present the various dental bone graft and substitute materials that have been used to achieve a successful dental implant. The article also reviews the properties of dental bone grafts and various dental bone substitutes that have been studied or are currently available commercially. The various classifications of bone grafts and substitutes, including natural and synthetic materials, are critically presented, and available commercial products in each category are discussed. Different bone substitute materials, including metals, ceramics, polymers, or their combinations, and their chemical, physical, and biocompatibility properties are explored. Limitations of the available materials are presented, and areas which require further research and development are highlighted. Tissue engineering hybrid constructions with enhanced bone regeneration ability, such as cell-based or growth factor-based bone substitutes, are discussed as an emerging area of development.

Potential of Lyophilized Platelet Concentrates for Craniofacial Tissue Regenerative Therapies.

OBJECTIVE: The use of platelet concentrates (PCs) in oral and maxillofacial surgery, periodontology, and craniofacial surgery has been reported. While PCs provide a rich reservoir of autologous bioactive growth factors for tissue regeneration, their drawbacks include lack of utility for long-term application, low elastic modulus and strength, and limited storage capability. These issues restrict their broader application. This review focuses on the lyophilization of PCs (LPCs) and how this processing approach affects their biological and mechanical properties for application as a bioactive scaffold for craniofacial tissue regeneration. MATERIALS AND METHODS: A comprehensive search of five electronic databases, including Medline, PubMed, EMBASE, Web of Science, and Scopus, was conducted from 1946 until 2019 using a combination of search terms relating to this topic. RESULTS: Ten manuscripts were identified as being relevant. The use of LPCs was mostly studied in in vitro and in vivo craniofacial bone regeneration models. Notably, one clinical study reported the utility of LPCs for guided bone regeneration prior to dental implant placement. CONCLUSIONS: Lyophilization can enhance the inherent characteristics of PCs and extends shelf-life, enable their use in emergency surgery, and improve storage and transportation capabilities. In light of this, further preclinical studies and clinical trials are required, as LPCs offer a potential approach for clinical application in craniofacial tissue regeneration.

Lyophilised Platelet-Rich Fibrin: Physical and Biological Characterisation.

BACKGROUND: Platelet-rich fibrin (PRF) has gained popularity in craniofacial surgery, as it provides an excellent reservoir of autologous growth factors (GFs) that are essential for bone regeneration. However, the low elastic modulus, short-term clinical application, poor storage potential and limitations in emergency therapy use restrict its more widespread clinical application. This study fabricates lyophilised PRF (Ly-PRF), evaluates its physical and biological properties, and explores its application for craniofacial tissue engineering purposes. MATERIAL AND METHODS: A lyophilisation method was applied, and the outcome was evaluated and compared with traditionally prepared PRF. We investigated how lyophilisation affected PRF's physical characteristics and biological properties by determining: (1) the physical and morphological architecture of Ly-PRF using SEM, and (2) the kinetic release of PDGF-AB using ELISA. RESULTS: Ly-PRF exhibited a dense and homogeneous interconnected 3D fibrin network. Moreover, clusters of morphologically consistent cells of platelets and leukocytes were apparent within Ly-PRF, along with evidence of PDGF-AB release in accordance with previously reports. CONCLUSIONS: The protocol established in this study for Ly-PRF preparation demonstrated versatility, and provides a biomaterial with growth factor release for potential use as a craniofacial bioscaffold.

Assessment of proliferating cell nuclear antigen (PCNA) expression at the invading front of oral squamous cell carcinoma.

BACKGROUND: Accurate prediction of the behaviour of oral squamous cell carcinoma (OSCC) is necessary to determine prognosis and provide appropriate treatment. Therefore, it is important to investigate potential prognostic markers to determine their predictive ability. Histological assessment of specific features at the invading front of oral squamous cell carcinomas has shown to provide accurate and reproducible prognostic information. Proliferating cell nuclear antigen (PCNA) is a nuclear marker known to reflect cell turnover and may be used as a marker for tumour aggressiveness. METHODS: Twenty cases of OSCC were histologically assessed to evaluate the correlation between proliferating cell nuclear antigen expression and invasive front grading. Each case was first assessed on a haematoxylin and eosin stained slide and an invading front grading (IFG) score was determined. In order to obtain a PCNA score, immunohistological staining was carried out using the peroxidase-labelled streptavidin-biotin technique with the monoclonal antibody PC10. RESULTS: In all cases, tumour islands had a periphery of intensely stained proliferating cell nuclear antigen-positive epithelial cells. The average IFG score was 8 ± 1.8, and the average PCNA score was 75% ± 11.2. Regression analysis was done using data from the IFG score and PCNA score and taking the latter as the predictor variable. The Pearson correlation coefficient was 0.134, with a p-value of 0.572. CONCLUSION: Since the correlation between PCNA score and IFG score was not significant (p > 0.05), we conclude that there is no association between cell proliferation at the invading tumour front and the histological grading of OSCC.

A Porous Fluoride-Substituted Bovine-Derived Hydroxyapatite Scaffold Constructed for Applications in Bone Tissue Regeneration.

Hydroxyapatite is widely used in bone implantation because of its similar mineral composition to natural bone, allowing it to serve as a biocompatible osteoconductive support. A bovine-derived hydroxyapatite (BHA) scaffold was developed through an array of defatting and deproteinization procedures. The BHA scaffold was substituted with fluoride ions using a modified sol-gel method to produce a bovine-derived fluorapatite (BFA) scaffold. Fourier-transform infrared spectroscopy and X-ray diffraction analysis showed that fluoride ions were successfully substituted into the BHA lattice. According to energy dispersive X-ray analysis, the main inorganic phases contained calcium and phosphorus with a fluoride ratio of ~1-2 wt%. Scanning electron microscopy presented a natural microporous architecture for the BFA scaffold with pore sizes ranging from ~200-600 µm. The BHA scaffold was chemically stable and showed sustained degradation in simulated-body fluid. Young's modulus and yield strength were superior in the BFA scaffold to BHA. In vitro cell culture studies showed that the BFA was biocompatible, supporting the proliferative growth of Saos-2 osteoblast cells and exhibiting osteoinductive features. This unique technique of producing hydroxyapatite from bovine bone with the intent of producing high performance biomedically targeted materials could be used to improve bone repair.

Demineralized dentin matrix for bone regeneration in dentistry: A critical update.

Over the last few decades, several new materials and techniques have been developed for bone regeneration. Scaffolds based on demineralized dentin matrix (DDM) present an attractive option due to their availability and several animal and human studies have been conducted to ascertain their utility in regenerative dentistry. The aim of this review was to summarize the recent studies conducted on DDM and used for bone grafts. PubMed, Web of Science, and Scopus were used to search for studies published within the last 10 years. The keywords and terms used were: "demineralized dentine matrix", "bone grafting", "bone augmentation" and "guided tissue regeneration" in various combinations. Original studies (in vitro, animal and human) and systematic reviews were included in the literature search. The literature search initially identified 23 studies (16 animal studies and 7 clinical reports. Most studies included in this review indicate that DDM has demonstrated promising results in a variety of dental and regenerative medicine applications. Further studies are required to completely comprehend its characteristics and prospective applications. Future studies should also focus on optimizing the processing protocols for the production of DDM-based scaffolds.

Effectiveness of gold nanoparticles in prevention and treatment of oral mucositis in animal models: a systematic review.

BACKGROUND: Oral mucositis remains a significant complication during cancer therapy with no effective treatment. Gold nanoparticles offer anti-inflammatory, antioxidant properties with low toxicity. This study systematically reviews the literature assessing gold nanoparticles in the management of oral mucositis in animal models. METHODS: A literature search was undertaken using MEDLINE, Embase, PubMed, and Web of Science databases, using the format for Systematic Review Centre for Laboratory Animal Experimentation. Prior to the review, the protocol was registered in the systematic review register, PROSPERO (registration no. CRD42021272169). Outcome measures included ulceration, histopathological scores, inflammatory mediators, microbial growth, and pain. Study quality was analysed by SYRCLE risk-of-bias tool. RESULTS: Only one study met the inclusion criteria, documenting reduction in ulceration, inflammatory, and oxidative biomarkers. Exposure to AuNPs prevented inflammatory response induced by 5-fluorouracil in oral mucosa of hamsters. However, a high risk of bias necessitates further research. CONCLUSION: This review identifies a potential therapeutic strategy for prevention and management of oral mucositis. It also provides future direction for gold nanoparticle research in oral mucositis; however, there is lack of sufficient evidence to derive any conclusion. Research with standardized parameters including nanoparticle size, capping agent, surface charge, and appropriate oral mucositis animal models will establish risk-benefit balance and margin of safety for therapeutic use of gold nanoparticles for oral mucositis.

A randomized clinical trial investigating the effect of three vital tooth bleaching protocols on oral health-related quality of life.

Objectives: This study aimed to compare changes in oral health-related quality of life (OHRQoL) resulting from three vital tooth bleaching protocols. Methods: The participants (n = 105) were randomly assigned to one of three vital bleaching treatment groups: home bleaching (HB), in-office bleaching (IOB), or combined bleaching (CB). HB involved the use of custom-made trays and 10% carbamide peroxide for a 14-day treatment period. IOB utilized 37.5% hydrogen peroxide applied in three cycles. CB treatment involved the use of IOB followed by HB. Tooth colour change was evaluated using a shade guide (ΔVS) and a digital spectrophotometry device (ΔES). The Oral Health Impact Profile-14 (OHIP-14) and Oral Impact on Daily Performance-22 (OIDP-22) instruments were used to assess changes in OHRQoL at baseline, 15-days and 6-month recalls. Linear mixed models were used to estimate between- and within-group differences. Results: All bleaching protocols led to significant improvements in overall OHIP-14 scores at the 6-month recall (p ≤ 0.037). CB and IOB treatments were associated with more substantial positive impacts on overall scores, psychological discomfort, physical disability (CB only), and psychological disability (CB only) compared to HB (p ≤ 0.011). Significant enhancements in OIDP-22 scores were observed in the CB and HB groups at the 6-month recall compared to baseline (p ≤ 0.006), with evidence indicating that these improvements were greater in the CB group compared to the IOB group (p = 0.007). Conclusion: All bleaching treatments demonstrated a positive impact on OHRQoL. However, the positive impact was most consistent across domains and age groups in the CB group. The positive impact was less pronounced in older age groups.

Harnessing the Regenerative Potential of Purified Bovine Dental Pulp and Dentin Extracellular Matrices in a Chitosan/Alginate Hydrogel.

When a tooth is diseased or damaged through caries, bioactive molecules are liberated from the pulp and dentin as part of the natural response to injury and these are key molecules for stimulating stem cell responses for tissue repair. Incorporation of these extracellular-matrix (ECM)-derived molecules into a hydrogel model can mimic in vivo conditions to enable dentin-pulp complex regeneration. Here, a chitosan/alginate (C/A) hydrogel is developed to sequester bovine ECM extracts. Human dental pulp cells (hDPCs) are cultured with these constructs and proliferation and cytotoxicity assays confirm that these C/A hydrogels are bioactive. Sequential z-axis fluorescent imaging visualizes hDPCs protruding into the hydrogel as it degraded. Alizarin red S staining shows that hDPCs cultured with the hydrogels display increased calcium-ion deposition, with dentin ECM stimulating the highest levels. Alkaline phosphatase activity is increased, as is expression of transforming growth factor-beta as demonstrated using immunocytochemistry. Directional analysis following phase contrast kinetic image capture demonstrates that both dentin and pulp ECM molecules act as chemoattractants for hDPCs. Data from this study demonstrate that purified ECM from dental pulp and dentin when delivered in a C/A hydrogel stimulates dental tissue repair processes in vitro.

The effect of an additional application of sealer prior to backfilling in the Continuous Wave of Condensation technique.

An additional sealer application was investigated prior to backfilling with the Continuous Wave of Condensation (CWC). 105 Palatal roots were sectioned and prepared to a file size 40, 0.06 taper with Vortex Blue® files. Groups A, B and C had a single sealer application before while groups D, E and F, received a second application of dyed sealer prior to backfilling. Roots were sectioned at 2,3,4,6,7 and 8 mm from the root apex. The percentage of sealer and dentinal tubular penetration depth was calculated at each level. At each ascending level, the sealer percentage decreased for each experimental group while the number of outer third penetration depths increased when all groups were combined. An additional sealer application prior to backfilling had minimal effect on the percentage of sealer or outer third penetration depths and can be considered a clinical preference rather than an imperative step with the CWC technique.

Micro-CT Evaluation of Spontaneous Apexification of an Immature Tooth following Trauma.

This case reports on the micro-computerised tomography (CT) images of a periapical calcified dome following spontaneous apexification as a subsequence of trauma. An immature, maxillary central incisor was found to be non-vital one month following trauma. The tooth had minimal signs of structural damage; however, there was radiographic evidence of spontaneous apexification. The tooth suffered a second traumatic episode two years later and was decoronated to facilitate bone retention during osseous development. The patient presented with swelling and pain 36 months later, and the tooth root was extracted. The root was embedded in resin, and cross-sectional images were obtained using micro-CT. Analysis of the images provided insight into the structure of the calcified dome that formed following the first traumatic injury.

In Vitro Biological Testing of Dental Materials.

Dental materials are specially fabricated materials designed for use in dentistry. A variety of materials may be used, including cements, impression, lining, and dental restorative materials. Some of these dental materials provide temporary dressings while others are more permanent and are in contact with host tissue for prolonged periods of time. Consequently, newly developed dental materials not only require mechanical, chemical, and physical testing but also require in vitro analysis to ensure their safety and biocompatibility. The current chapter provides background on dental material characterization and a protocol for its in vitro biological testing.

Potential Beneficial Effects of Hydroxyapatite Nanoparticles on Caries Lesions In Vitro-A Review of the Literature.

Dental caries is one of the most common human diseases which can occur in both primary and permanent dentitions throughout the life of an individual. Hydroxyapatite is the major inorganic component of human teeth, consequently, nanosized hydroxyapatite (nHAP) has recently attracted researchers' attention due to its unique properties and potential for caries management. This article provides a contemporary review of the potential beneficial effects of nHAP on caries lesions demonstrated in in vitro studies. Data showed that nHAP has potential to promote mineralization in initial caries, by being incorporated into the porous tooth structure, which resulted from the caries process, and subsequently increased mineral content and hardness. Notably, it is the particle size of nHAP which plays an important role in the mineralization process. Antimicrobial effects of nHAP can also be achieved by metal substitution in nHAP. Dual action property (mineralizing and antimicrobial) and enhanced chemical stability and bioactivity of nHAP can potentially be obtained using metal-substituted fluorhydroxyapatite nanoparticles. This provides a promising synergistic strategy which should be explored in further clinical research to enable the development of dental therapeutics for use in the treatment and management of caries.