Potential drug-drug interactions in patients presenting with osteoarthritis to community orthopaedic clinics of Abbottabad, Khyber Pakhtunkhwa: A cross-sectional study.

OBJECTIVES: Osteoarthritis (OA) causes long-term pain and disorders of lower extremities. Paracetamol is the drug of choice; however, NSAIDs, opioids and steroids are frequently employed in the symptomatic relief of OA. The prescribing of multiple analgesics leads to potential drug-drug interactions (pDDIs). The primary objective of this study was to identify the prevalence and predictors of pDDIs in OA. MATERIALS AND METHODS: A total of three hundred and eighty-six patients, either newly diagnosed or with a history of OA, were enrolled for this cross-sectional study. Data regarding patients' demographics, clinical characteristics and prescribed medications were recorded from the prescriptions and examined for the pDDIs using Medscape multidrug interaction checker. RESULTS: Among 386, most patients were females (53.4%). The most prevalent diagnoses were knee OA (39.7%) and unspecified OA (31.3%). Paracetamol and topical NSAIDs were underprescribed whereas an oral NSAID, Diclofenac, was the most frequently used drug in OA. Total of 109 pDDIs were found in 386 prescriptions, of which 63.3% DDIs were categorised as moderate, followed by minor (34.9%) and major (1.8%). CONCLUSIONS: This study finds a prevalence of DDIs and polypharmacy among the OA patients. Collaborative efforts among healthcare providers, pharmacists, and patients themselves are essential to optimize medication regimens and minimize the polypharmacy including the associated risks as well as DDIs.

Special Issue: Molecular Research on Dental Materials and Biomaterials 2018.

Worldwide, populations of all ages suffer from oral diseases, disorders, pathological conditions of the oral cavity, and their impact on the human body [...].

Incidence and management of cleft lip and palate in Pakistan.

OBJECTIVE: To compare the occurrence, distribution and management of clefts of lip and palate in local patients with the available data from India and China. METHODS: The retrospective study was conducted at the Interdisciplinary Research Centre in Biomedical Materials, COMSATS University Islamabad, Lahore Campus, Lahore, Pakistan, and comprised data related to a three-month period from January to March 2015 at two medical centres in Lahore. Data from Pakistani centres was analysed based on province, gender, age and clefts of lip and palate conditions and Spearman's correlation matrix. RESULTS: Of the 1574 cases, 1061(67.4%) were from Punjab, 361(23%) Khyber Pakhtunkhwa, 85(5%) Sindh and 67(4.2%) were from Azad Jammu and Kashmir. The incidence of clefts of lip and palate was higher in males than females. There was higher awareness of the need for timely management in new borns with clefts of lip and palate. Some patients seeking secondary treatment were also being surgically corrected. There is no national registry of children born with cleft defect, making it difficult to assess the full scale of the problem.. CONCLUSIONS: Based on available data, it is likely that there are many adults who have not been treated when younger..

Electrospinning of Chitosan-Based Solutions for Tissue Engineering and Regenerative Medicine.

Electrospinning has been used for decades to generate nano-fibres via an electrically charged jet of polymer solution. This process is established on a spinning technique, using electrostatic forces to produce fine fibres from polymer solutions. Amongst, the electrospinning of available biopolymers (silk, cellulose, collagen, gelatine and hyaluronic acid), chitosan (CH) has shown a favourable outcome for tissue regeneration applications. The aim of the current review is to assess the current literature about electrospinning chitosan and its composite formulations for creating fibres in combination with other natural polymers to be employed in tissue engineering. In addition, various polymers blended with chitosan for electrospinning have been discussed in terms of their potential biomedical applications. The review shows that evidence exists in support of the favourable properties and biocompatibility of chitosan electrospun composite biomaterials for a range of applications. However, further research and in vivo studies are required to translate these materials from the laboratory to clinical applications.

Advances of Proteomic Sciences in Dentistry.

Applications of proteomics tools revolutionized various biomedical disciplines such as genetics, molecular biology, medicine, and dentistry. The aim of this review is to highlight the major milestones in proteomics in dentistry during the last fifteen years. Human oral cavity contains hard and soft tissues and various biofluids including saliva and crevicular fluid. Proteomics has brought revolution in dentistry by helping in the early diagnosis of various diseases identified by the detection of numerous biomarkers present in the oral fluids. This paper covers the role of proteomics tools for the analysis of oral tissues. In addition, dental materials proteomics and their future directions are discussed.

Modifications in Glass Ionomer Cements: Nano-Sized Fillers and Bioactive Nanoceramics.

Glass ionomer cements (GICs) are being used for a wide range of applications in dentistry. In order to overcome the poor mechanical properties of glass ionomers, several modifications have been introduced to the conventional GICs. Nanotechnology involves the use of systems, modifications or materials the size of which is in the range of 1-100 nm. Nano-modification of conventional GICs and resin modified GICs (RMGICs) can be achieved by incorporation of nano-sized fillers to RMGICs, reducing the size of the glass particles, and introducing nano-sized bioceramics to the glass powder. Studies suggest that the commercially available nano-filled RMGIC does not hold any significant advantage over conventional RMGICs as far as the mechanical and bonding properties are concerned. Conversely, incorporation of nano-sized apatite crystals not only increases the mechanical properties of conventional GICs, but also can enhance fluoride release and bioactivity. By increasing the crystallinity of the set matrix, apatites can make the set cement chemically more stable, insoluble, and improve the bond strength with tooth structure. Increased fluoride release can also reduce and arrest secondary caries. However, due to a lack of long-term clinical studies, the use of nano-modified glass ionomers is still limited in daily clinical dentistry. In addition to the in vitro and in vivo studies, more randomized clinical trials are required to justify the use of these promising materials. The aim of this paper is to review the modification performed in GIC-based materials to improve their physicochemical properties.

SUCCESSFUL SURGICAL TREATMENT OF OBSTRUCTIVE LIVER DISEASE CAUSED BY A BILIARY CALCULUS IN A CAPTIVE CHIMPANZEE (PAN TROGLODYTES).

A 40-yr-old female chimpanzee (Pan troglodytes) presented with intermittent, short-duration episodes of nonspecific clinical signs that included lethargy and reduced responsiveness to external stimuli. Clinical examination and diagnostics suggested obstructive hepatic disease, which was confirmed by subsequent ultrasonographic examination. During routine laparotomy, a biliary calculus was removed from the distal common bile duct and the gallbladder was removed, which resulted in complete clinical recovery. The biliary calculus was analyzed as a mixed composition of predominantly cholesterol, bilirubin, and calcium.

Stimulation of hair regrowth in an animal model of androgenic alopecia using 2-deoxy-D-ribose.

Androgenic alopecia (AGA) affects both men and women worldwide. New blood vessel formation can restore blood supply and stimulate the hair regrowth cycle. Recently, our group reported that 2-deoxy-D-ribose (2dDR) is 80%-90% as effective as VEGF in the stimulation of neovascularization in in vitro models and in a chick bioassay. In this study, we aimed to assess the effect of 2dDR on hair growth. We prepared an alginate gel containing 2dDR, polypropylene glycol, and phenoxyethanol. AGA was developed in C57BL6 mice by intraperitoneally injecting testosterone (TE). A dihydrotestosterone (DHT)-treated group was used as a negative control, a minoxidil group was used as a positive control, and we included groups treated with 2dDR gel and a combination of 2dDR and minoxidil. Each treatment was applied for 20 days. Both groups treated with 2dDR gel and minoxidil stimulated the morphogenesis of hair follicles. H&E-stained skin sections of C57BL/6 mice demonstrated an increase in length, diameter, hair follicle density, anagen/telogen ratio, diameter of hair follicles, area of the hair bulb covered in melanin, and an increase in the number of blood vessels. Masson's trichrome staining showed an increase in the area of the hair bulb covered in melanin. The effects of the FDA-approved drug (minoxidil) on hair growth were similar to those of 2dDR (80%-90%). No significant benefit were observed by applying a combination of minoxidil with 2dDR. We conclude that 2dDR gel has potential for the treatment of androgenic alopecia and possibly other alopecia conditions where stimulation of hair regrowth is desirable, such as after chemotherapy. The mechanism of activity of 2dDR remains to be established.

Synthesis of cerium, zirconium, and copper doped zinc oxide nanoparticles as potential biomaterials for tissue engineering applications.

A novel eco-friendly high throughput continuous hydrothermal flow system was used to synthesise phase pure ZnO and doped ZnO in order to explore their properties for tissue engineering applications. Cerium, zirconium, and copper were introduced as dopants during flow synthesis of ZnO nanoparticles, Zirconium doped ZnO were successfully synthesised, however secondary phases of CeO and CuO were detected in X-ray diffraction (XRD). The nanoparticles were characterised using X-ray diffraction, Brunauer-Emmett-Teller (BET), Dynamic Light scattering Measurements, Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Fourier transform infrared spectroscopy (FT-IR) and RAMAN spectroscopy was used to evaluate physical, chemical, and structural properties. The change in BET surface area was also significant, the surface area increased from 11.35 (ZnO_2) to 26.18 (ZrZnO_5). However. In case of CeZnO_5 and CuZnO_5 was not significant 13.68 (CeZnO_5) and 12.16 (CuZnO_5) respectively. Cell metabolic activity analysis using osteoblast-like cells (MG63) and human embryonic derived mesenchymal stem cells (hES-MP) demonstrated that doped ZnO nanoparticles supported higher cell metabolic activity compared to cells grown in standard media with no nanoparticles added, or pure zinc oxide nanoparticles. The ZrZnO_5 demonstrated the highest cell metabolic activity and non-cytotoxicity over the duration of 28 days as compared to un doped or Ce or Cu incorporated nanoparticles. The current data suggests that Zirconium doping positively enhances the properties of ZnO nanoparticles by increasing the surface area and cell proliferation. Therefore, are potential additives within biomaterials or for tissue engineering applications.

Chitosan-sodium percarbonate-based hydrogels with sustained oxygen release potential stimulated angiogenesis and accelerated wound healing.

The prolonged hypoxic conditions hinder chronic wounds from healing and lead to severe conditions such as delayed re-epithelialization and enhanced risk of infection. Multifunctional wound dressings are highly required to address the challenges of chronic wounds. Herein, we report polyurethane-coated sodium per carbonate-loaded chitosan hydrogel (CSPUO2 ) as a multifunctional dressing. The hydrogels (Control, CSPU, and CSPUO2 ) were prepared by freeze gelation method and the developed hydrogels showed high porosity, good absorption capacity, and adequate biodegradability. The release of oxygen from the CSPUO2 hydrogel was confirmed by the increase in pH and a sustained oxygen release was observed over the period of 21 days, due to polyurethane (CSPU) coating. The CSPUO2 hydrogel exhibited around 2-fold increased angiogenic potential in CAM assay when compared with Control and CSPU dressing. CSPUO2 also showed good level of antibacterial efficacy against E. coli and S. aureus. In a full-thickness rat wound model, CSPUO2 hydrogel considerably accelerated wound healing with exceptional re-epithelialization granulation tissue formation less inflammatory cells and improved skin architecture highlighting the tremendous therapeutic potential of this hydrogel when compared with control and CSPU to treat chronic diabetic and burn wounds.

A novel methodology for stabilization of silver nanoparticles on cotton, nylon and cotton/nylon fabrics using chitosan and triethyl orthoformate for enhanced and elongated antibacterial performance.

In the present study, the commercially available three different fabrics cotton, nylon and cotton/nylon were modified by chitosan and silver nanoparticles using a crosslinker triethyl orthoformate (TEOF). Resulted cotton­silver (Ag-Cs-Cot), nylon­silver (Ag-Cs-Nyl) and cotton-nylon silver (Ag-Cs-Cot-Nyl) fabrics showed significant anti-bacterial activity even after 50 washing cycles. Silver nanoparticles were prepared by reducing silver nitrate through sodium borohydride at 0 °C. In FTIR spectra the peak at near 1650 cm-1 confirmed that TEOF mediated attachment of chitosan with fabrics (due to C=N) and the stretching of secondary amine near the 3375 cm-1 indicated the silver attachment to the amine group of the chitosan. In Scanning Electron Microscope (SEM) images smooth surfaces of fabrics without any damage by modification process were observed. The antibacterial activity was Analyzed by agar diffusion and broth dilution assays against Escherichia coli and Staphylococcus aureus bacterial strains and results showed 90% bacterial inhibition against E. coli and 89% bacterial inhibition against S. aureus. For testing the antibacterial durability, the modified fabrics were washed with non-ionic detergent (10g/l) for 15 minutes under aggressive stirring (100 rpm) at room temperature. The modified fabrics retained antibacterial activity over the 50 washing cycles. Finally, the commercial potential of cotton-silver fabric was evaluated by stitching it with the socks of football players and interestingly results showed that the modified fabric on the socks showed more than 90% bacterial inhibition as compared to the plain fabric after 70 minutes of playing activity.

Studies on tolfenamic acid-chitosan intermolecular interactions: effect of pH, polymer concentration and molecular weight.

Solid-state properties of tolfenamic acid (TA) and its complexes with chitosan (CT) have been studied. Effect of medium pH, molecular weight of polymer and its different concentrations on these TA-CT complexes were studied in detail. Low and medium molecular weight CT have been used in different ratios at pH ranging from 4 to 6 and freeze-drying technique has been employed to modify the appearance of crystalline TA. Physical properties of the formed complexes have been studied by employing X-ray diffraction, differential scanning calorimetry and scanning electron microscopy; chemical structure has been studied using Fourier transform infrared spectroscopy. The results showed that both forms of the polymer exhibited complete conversion in 1:8 ratio at pH 4, 1:4 at pH 5 and 1:1 at pH 6 indicating a marked effect of pH on drug-polymer complexation. The percent crystallinity calculations indicated low molecular weight CT slightly more effective than the other form. No changes in the complexes have been observed during the 12 week storage under controlled conditions. Both forms of CT at different pH values indicated retardation of recrystallization in TA during cooling of the melt from 1:1 ratios exhibiting formation of strong intermolecular hydrogen bonding between the drug and the polymer.

Biomimetic PLGA/Strontium-Zinc Nano Hydroxyapatite Composite Scaffolds for Bone Regeneration.

Synthetic bone graft substitutes have attracted increasing attention in tissue engineering. This study aimed to fabricate a novel, bioactive, porous scaffold that can be used as a bone substitute. Strontium and zinc doped nano-hydroxyapatite (Sr/Zn n-HAp) were synthesized by a water-based sol-gel technique. Sr/Zn n-HAp and poly (lactide-co-glycolide) (PLGA) were used to fabricate composite scaffolds by supercritical carbon dioxide technique. FTIR, XRD, TEM, SEM, and TGA were used to characterize Sr/Zn n-HAp and the composite scaffolds. The synthesized scaffolds were adequately porous with an average pore size range between 189 to 406 µm. The scaffolds demonstrated bioactive behavior by forming crystals when immersed in the simulated body fluid. The scaffolds after immersing in Tris/HCl buffer increased the pH value of the medium, establishing their favorable biodegradable behavior. ICP-MS study for the scaffolds detected the presence of Sr, Ca, and Zn ions in the SBF within the first week, which would augment osseointegration if implanted in the body. nHAp and their composites (PLGA-nHAp) showed ultimate compressive strength ranging between 0.4-19.8 MPa. A 2.5% Sr/Zn substituted nHAp-PLGA composite showed a compressive behavior resembling that of cancellous bone indicating it as a good candidate for cancellous bone substitute.

Design and development of thyroxine/heparin releasing affordable cotton dressings to treat chronic wounds.

This research on a thyroxine/heparin-based cotton wound dressing tests angiogenic and wound healing ability of thyroxine/heparin in a chick chorionic allantoic membrane bioassay and in skin wounds in healthy rats. Commercially available cotton dressings were simply loaded with thyroxine/heparin solutions and coated with wax. Prior to undertaking the animal study, we assessed in vitro release of thyroxine/heparin from coated and uncoated cotton dressings. Both showed more than 85% release of drug over 14 days, though the lesser release was observed in wax-coated thyroxine/heparin dressing as compared to uncoated thyroxine/heparin dressing. Testing of angiogenesis through CAM assay proved good angiogenic potential of heparin and thyroxin, but the thyroxine found more angiogenic than heparin. In animal study, full-thickness skin wounds of 20 mm diameter showed good healing in both heparin and thyroxine-treated groups. But the most striking result was seen in the thyroxine-treated group where thyroxine showed significant difference with heparin-treated group and completely healed the wounds in 23 days. Thus, the study suggest that thyroxine possesses greater angiogenic and wound healing potential than heparin, and the use of thyroxine/heparin-loaded wax-coated cotton dressing could be a cost-effective option for the management of chronic wounds.

Ceramic Stereolithography of Bioactive Glasses: Influence of Resin Composition on Curing Behavior and Green Body Properties.

Herein we report on the preparation of a bioactive glass (BAG)-based photocurable resin for the additive manufacturing of BAG scaffolds with high filler loadings. The preparation of glass/ceramics resins for stereolithography with high filler loading is always a challenge, especially for fillers with a high refractive index variance. Various photocurable resin compositions with and without bioactive glass fillers have been investigated to see the influence of bioactive glass on physical properties of the resin and resulting green body. The effect of concentration of monomers, reactive diluent, light absorber (Sudan orange G dye), photoinitiator (PI), non-reactive diluent, and fillers (BAG) on rheology and photocuring behavior of the resin and tomography of the resulting 3D structures have been investigated. The BAG contents affect the rheology of resin and influence the rate of the polymerization reaction. The resin compositions with 55-60% BAG, 10% PEG-200 (diluent), 1% of PI and 0.015% of the dye were found to be suitable compositions for the stereolithographic fabrication. A higher percentage of PI caused over-curing, while a higher amount of dye decreased the cure depth of the resin. The micro-computed tomography (µ-CT) and scanning electron microscopic (SEM) images of the resulting green bodies display a relatively dense glass scaffold without any visible cracks and good interlayer connection and surface finishing. These properties play an important role in the mechanical behavior of 3D scaffolds. This study will be helpful to prepare high density glass/ceramic slurries and optimize their printing properties.

An Auxetic structure configured as oesophageal stent with potential to be used for palliative treatment of oesophageal cancer; development and in vitro mechanical analysis.

Oesophageal cancer is the ninth leading cause of malignant cancer death and its prognosis remains poor. Dysphagia which is an inability to swallow is a presenting symptom of oesophageal cancer and is indicative of incurability. The goal of this study was to design and manufacture an Auxetic structure film and to configure this film as an Auxetic stent for the palliative treatment of oesophageal cancer, and for the prevention of dysphagia. Polypropylene was used as a material for its flexibility and non-toxicity. The Auxetic (rotating-square geometry) structure was made by laser cutting the polypropylene film. This flat structure was welded together to form a tubular form (stent), by an adjustable temperature control soldering iron station: following this, an annealing process was also carried out to ease any material stresses. Poisson's ratio was estimated and elastic and plastic deformation of the Auxetic structure was evaluated. The elastic and plastic deformation behaviours of the Auxetic polypropylene film were evaluated by applying repetitive uniaxial tensile loads. Observation of the structure showed that it was initially elastically deformed, thereafter plastic deformation occurred. This research discusses a novel way of fabricating an Auxetic structure (rotating-squares connected together through hinges) on Polypropylene films, by estimating the Poisson's ratio and evaluating the plastic deformation relevant to the expansion behaviour of an Auxetic stent within the oesophageal lumen.

Elucidating the chemical and structural composition of breast cancer using Raman micro-spectroscopy.

The current gold standard for breast cancer (BC) diagnosis is the histopathological assessment of biopsy samples. However, this approach limits the understanding of the disease in terms of biochemical changes. Raman spectroscopy has demonstrated its potential to provide diagnostic information and facilitate the prediction of the biochemical progression for different diseases in a rapid non-destructive manner. Raman micro-spectroscopy was used to characterize and differentiate breast cancer and normal breast samples. In this study, tissue microarrays of breast cancer biopsy samples (n=499) and normal breast (n=79) were analyzed using Raman micro-spectroscopy, and principal component analysis (PCA) was used for feature extraction. Linear discriminant analysis (LDA) was used for feature validation. Normal breast and breast cancer were successfully differentiated with a sensitivity of 90 % and specificity of 78 %. Dominance of lipids, specifically fatty acids, was identified in the normal tissue whereas proteins dominated the malignant spectra. Higher intensities of carotenoids, ß-carotenoids, and cholesterol were identified in the normal breast while ceramide related peaks were mostly visible in the BC spectra. The biochemical characterization achieved with Raman micro-spectroscopy showed that this technique is a powerful and reliable tool for the monitoring and diagnosis of BC, regardless of the cohort heterogeneity. Raman spectroscopy also provided a powerful insight into the biochemical changes associated with the BC progression and evolution.

Thyroxine impregnated chitosan-based dressings stimulate angiogenesis and support fast wounds healing in rats: Potential clinical candidates.

This research paper demonstrates efficacy of chitosan and thyroxine loaded chitosan (CS) dressings for their angiogenic and wound healing potential. The dressings were prepared by freeze gelation method. Thyroxine was loaded by physical adsorption into chitosan membranes. The porosity was analyzed by scanning electron microscopy (SEM) and chemical structures were investigated by Fourier transform infra-red spectroscopy (FTIR). Cell culture studies showed materials were non-toxic and chorioallantoic membranes assay (CAM) confirmed that the thyroxine loaded chitosan stimulated angiogenesis much higher than simple chitosan dressings. In addition, thyroxine loaded dressings showed excellent wound healing potential when tested on full thickness rats wounds. A good epithelialization was obtained along with robust wound closure. Overall, as compared to chitosan, thyroxine containing membranes showed high level of angiogenesis and fast wound healing.

Thyroxine-loaded chitosan/carboxymethyl cellulose/hydroxyapatite hydrogels enhance angiogenesis in in-ovo experiments.

Angiogenesis is one of the most important processes in repair and regeneration of many tissues and organs. Blood vessel formation also play a major role in repair of dental tissue(s) after ailments like periodontitis. Here we report the preparation of chitosan/carboxymethyl cellulose/hydroxyapatite based hydrogels, loaded with variable concentrations of thyroxin i.e., 0.1 µg/ml, 0.5 µg/ml and 1 µg/ml. Scanning electron microcopy images (SEM) showed all hydrogels were found to be porous and solution absorption study exhibited high swelling potential in aqueous media. FTIR spectra confirmed that the used materials did not change their chemical identity in synthesized hydrogels. The synthesized hydrogels demonstrated good bending, folding, rolling and stretching abilities. The hydrogels were tested in chick chorioallantoic membrane (CAM) assay to investigate their angiogenic potential. Hydrogel containing 0.1 µg/ml of thyroxine showed maximum neovascularization. For cytotoxicity analyses, preosteoblast cells (MC3T3-E1) were seeded on these hydrogels and materials were found to be non-toxic. These hydrogels with pro-angiogenic activity possess great potential to be used for periodontal regeneration.

Oxygen Generating Polymeric Nano Fibers That Stimulate Angiogenesis and Show Efficient Wound Healing in a Diabetic Wound Model.

INTRODUCTION: Diabetic wounds are challenging to treat due to a wide range of pathophysiological changes. Hypoxia is one of the predominant contributing factors of poor vascularization and chronicity in diabetic wounds. This study was designed to develop polycaprolactone (PCL)-based oxygen-releasing electrospun wound dressings and evaluate their efficacy for improved full thickness wound healing in diabetic rats. METHODS: PCL-based oxygen releasing wound dressings were made using electrospinning technology. The developed dressings were characterized in terms of physical as well as biological properties both in vitro and in vivo. E-spun nanofibrous dressings were physically characterized with scanning electron microscopy, Fourier-transform infrared spectroscopy, and Energy-dispersive X-ray spectroscopy. To study the likely impact of the fabricated wound dressings in hypoxic conditions, HIF-1α expression analysis was carried out both at gene and protein levels. Wound dressings were further evaluated for their healing potential for extensive wounds in diabetic rat models. RESULTS: The experimental results showed that the developed dressings were capable of continuously generating oxygen for up to 10 days. Cell studies further confirmed pronounced expression of HIF-1α at gene and protein levels in cells seeded on PCL-sodium percarbonate (SPC) and PCL scaffolds compared with the cells cultured on a tissue culture plate. Chorioallantoic membrane assay revealed the supportive role of oxygen releasing dressings on angiogenesis compared to the control group. Histological assessment of the regenerated skin tissues proved that full thickness wounds covered with SPC loaded PCL dressings had a comparatively better vascularized and compact extracellular matrix with completely covered thick epithelium. DISCUSSION: The developed oxygen generating polymeric nanofibrous wound dressings could potentially be used as an envisioned approach for the efficient recovery of chronic diabetic wounds.