Continuous-wave lasing in colloidal quantum dot solids enabled by facet-selective epitaxy.

Colloidal quantum dots (CQDs) feature a low degeneracy of electronic states at the band edges compared with the corresponding bulk material, as well as a narrow emission linewidth. Unfortunately for potential laser applications, this degeneracy is incompletely lifted in the valence band, spreading the hole population among several states at room temperature. This leads to increased optical gain thresholds, demanding high photoexcitation levels to achieve population inversion (more electrons in excited states than in ground states-the condition for optical gain). This, in turn, increases Auger recombination losses, limiting the gain lifetime to sub-nanoseconds and preventing steady laser action. State degeneracy also broadens the photoluminescence linewidth at the single-particle level. Here we demonstrate a way to decrease the band-edge degeneracy and single-dot photoluminescence linewidth in CQDs by means of uniform biaxial strain. We have developed a synthetic strategy that we term facet-selective epitaxy: we first switch off, and then switch on, shell growth on the (0001) facet of wurtzite CdSe cores, producing asymmetric compressive shells that create built-in biaxial strain, while still maintaining excellent surface passivation (preventing defect formation, which otherwise would cause non-radiative recombination losses). Our synthesis spreads the excitonic fine structure uniformly and sufficiently broadly that it prevents valence-band-edge states from being thermally depopulated. We thereby reduce the optical gain threshold and demonstrate continuous-wave lasing from CQD solids, expanding the library of solution-processed materials that may be capable of continuous-wave lasing. The individual CQDs exhibit an ultra-narrow single-dot linewidth, and we successfully propagate this into the ensemble of CQDs.

Quantitative morphological analysis of InP-based quantum dots reveals new insights into the complexity of shell growth.

The incorporation of quantum dots in display technology has fueled a renewed interest in InP-based quantum dots, but difficulty controlling the Zn chemistry during shelling has stymied thick, even ZnSe shell growth. The characteristic uneven, lobed morphology of Zn-based shells is difficult to assess qualitatively and measure through traditional methods. Here, we present a methodological study utilizing quantitative morphological analysis of InP/ZnSe quantum dots to analyze the impact of key shelling parameters on InP core passivation and shell epitaxy. We compare conventional hand-drawn measurements with an open-source semi-automated protocol to showcase the improved precision and speed of this method. Additionally, we find that quantitative morphological assessment can discern morphological trends in morphologies that qualitative methods cannot. In conjunction with ensemble fluorescence measurements, we find that changes to shelling parameters that promote even shell growth often do so at the cost of core homogeneity. These results indicate that the chemistry of passivating the core and promoting shell growth must be balanced carefully to maximize brightness while maintaining emission color-purity.

Fluorescent Colloidal Ferroelectric Nanocrystals.

We report the appearance of ferroelectric behavior arising from a room-temperature cation exchange of cadmium-based semiconductor nanoparticles. Fluorescence retention was achieved through protective CdS shelling before cation exchange with tin(IV) by containing defects in the CdS shell rather than the fluorescent CdSe cores. Ferroelectric response, measured using a Sawyer-Tower circuit, was kept constant, while fluorescence retention increases with an increase in the number of CdS monolayers. At 8 monolayers, fluorescence retention reached 99%, allowing for the addition of ferroelectric applications to the already ever-growing list of quantum dot applications.

Minimizing the Reorganization Energy of Cobalt Redox Mediators Maximizes Charge Transfer Rates from Quantum Dots.

Light-induced charge separation is at the very heart of many solar harvesting technologies. The reduction of energetic barriers to charge separation and transfer increases the rate of separation and the overall efficiency of these technologies. Here we report that the internal reorganization energy of the redox acceptor, the movement of the atoms with changing charge, has a profound effect on the charge transfer rates from donor quantum dots. We experimentally studied and modelled with Marcus Theory charge transfer to cobalt complexes that have similar redox potentials covering 350 mV, but vastly different reorganization energies spanning 2 eV. While the driving force does influence the electron transfer rates, the reorganization energies had a far more profound effect, increasing charge transfer rates by several orders of magnitude. Our studies suggest that careful design of redox mediators to minimize reorganization energy is an untapped route to drastically increase the efficiency of quantum dot applications that feature charge transfer.

Single Quantum Dot Tracking Unravels Agonist Effects on the Dopamine Receptor Dynamics.

D2 dopamine receptors (DRD2s) belong to a family of G protein-coupled receptors that modulate synaptic dopaminergic tone via regulation of dopamine synthesis, storage, and synaptic release. DRD2s are the primary target for traditional antipsychotic medications; dysfunctional DRD2 signaling has been linked to major depressive disorder, attention-deficit hyperactivity disorder, addiction, Parkinson's, and schizophrenia. DRD2 lateral diffusion appears to be an important post-translational regulatory mechanism; however, the dynamic response of DRD2s to ligand-induced activation is poorly understood. Dynamic imaging of the long isoform of DRD2 (D2L) fused to an N-terminal antihemagglutinin (HA) epitope and transiently expressed in HEK-293 cells was achieved through a combination of a high-affinity biotinylated anti-HA antigen-binding fragment (Fab) and streptavidin-conjugated quantum dots (QD). Significant reduction (∼40%) in the rate of lateral diffusion of QD-tagged D2L proteins was observed under agonist (quinpirole; QN)-stimulated conditions compared to basal conditions. QN-induced diffusional slowing was accompanied by an increase in frequency, lifetime, and confinement of temporary arrest of lateral diffusion (TALL), an intrinsic property of single receptor lateral motion. The role of the actin cytoskeleton in QN-induced diffusional slowing of D2L was also explored. The observed dynamic changes appear to be a sensitive indicator of the receptor activity status and might also spatially and temporally shape the receptor-mediated downstream signaling. This dynamic information could potentially be useful in informing drug discovery efforts based on single-molecule pharmacology.

Effect of indium alloying on the charge carrier dynamics of thick-shell InP/ZnSe quantum dots.

Thick-shell InP/ZnSe III-V/II-VI quantum dots (QDs) were synthesized with two distinct interfaces between the InP core and ZnSe shell: alloy and core/shell. Despite sharing similar optical properties in the spectral domain, these two QD systems have differing amounts of indium incorporation in the shell as determined by high-resolution energy-dispersive x-ray spectroscopy scanning transmission electron microscopy. Ultrafast fluorescence upconversion spectroscopy was used to probe the charge carrier dynamics of these two systems and shows substantial charge carrier trapping in both systems that prevents radiative recombination and reduces the photoluminescence quantum yield. The alloy and core/shell QDs show slight differences in the extent of charge carrier localization with more extensive trapping observed in the alloy nanocrystals. Despite the ability to grow a thick shell, structural defects caused by III-V/II-VI charge carrier imbalances still need to be mitigated to further improve InP QDs.

Role of shell composition and morphology in achieving single-emitter photostability for green-emitting "giant" quantum dots.

The use of the varied chemical reactivity of precursors to drive the production of a desired nanocrystal architecture has become a common method to grow thick-shell graded alloy quantum dots (QDs) with robust optical properties. Conclusions on their behavior assume the ideal chemical gradation and uniform particle composition. Here, advanced analytical electron microscopy (high-resolution scanning transmission electron microscopy coupled with energy dispersive spectroscopy) is used to confirm the nature and extent of compositional gradation and these data are compared with performance behavior obtained from single-nanocrystal spectroscopy to elucidate structure, chemical-composition, and optical-property correlations. Specifically, the evolution of the chemical structure and single-nanocrystal luminescence was determined for a time-series of graded-alloy "CdZnSSe/ZnS" core/shell QDs prepared in a single-pot reaction. In a separate step, thick (∼6 monolayers) to giant (>14 monolayers) shells of ZnS were added to the alloyed QDs via a successive ionic layer adsorption and reaction (SILAR) process, and the impact of this shell on the optical performance was also assessed. By determining the degree of alloying for each component element on a per-particle basis, we observe that the actual product from the single-pot reaction is less "graded" in Cd and more so in Se than anticipated, with Se extending throughout the structure. The latter suggests much slower Se reaction kinetics than expected or an ability of Se to diffuse away from the initially nucleated core. It was also found that the subsequent growth of thick phase-pure ZnS shells by the SILAR method was required to significantly reduce blinking and photobleaching. However, correlated single-nanocrystal optical characterization and electron microscopy further revealed that these beneficial properties are only achieved if the thick ZnS shell is complete and without large lattice discontinuities. In this way, we identify the necessary structural design features that are required for ideal light emission properties in these green-visible emitting QDs.

Biotinylated-spiperone ligands for quantum dot labeling of the dopamine D2 receptor in live cell cultures.

We have synthesized 3 analogs of the dopamine D2 receptor (D2 DR) antagonist spiperone that can be conjugated to streptavidin-coated quantum dots via a pegylated biotin derivative. Using fluorescent imaging we demonstrate that substitution on the spiro position is tolerated, whilst the length and rigidity of a spacer arm attached to spiperone is important in controlling specific labeling as well as minimizing nonspecific labeling to cells and the surface of cell culture dishes. The ligand with the most rigid linker IDT772 (4) had the best binding profile and had high specific binding to D2 DR expressing HEK-293T cells with low nonspecific binding to plates and HEK-293T cells that lacked the D2 DR.

Real colloidal quantum dot structures revealed by high resolution analytical electron microscopy.

The development of bright and photostable colloidal quantum dots has been a truly interdisciplinary feat. Designing a specific composition of core and shell materials and then producing the desired nanoarchitecture through chemical routes require a blend of physical and inorganic chemistry, solid-state physics, and materials science. In a battle to separate charge carriers from a surface wrought with defect states, complex shell structures with precisely specified gradient compositions have been engineered, producing nanosized emitters with exceptional stability and color purity. However, much of the success has resided in II-VI materials, such as CdSe, and progress is only just being made on cadmium-free quantum dots. This perspective will discuss the primary challenges in engineering colloidal quantum dots and highlight how the advent of advanced analytical electron microscopy is revealing the structure-function relationships of these complex systems.

Chemical Structure, Ensemble and Single-Particle Spectroscopy of Thick-Shell InP-ZnSe Quantum Dots.

Thick-shell (>5 nm) InP-ZnSe colloidal quantum dots (QDs) grown by a continuous-injection shell growth process are reported. The growth of a thick crystalline shell is attributed to the high temperature of the growth process and the relatively low lattice mismatch between the InP core and ZnSe shell. In addition to a narrow ensemble photoluminescence (PL) line-width (∼40 nm), ensemble and single-particle emission dynamics measurements indicate that blinking and Auger recombination are reduced in these heterostructures. More specifically, high single-dot ON-times (>95%) were obtained for the core-shell QDs, and measured ensemble biexciton lifetimes, τ2x ∼ 540 ps, represent a 7-fold increase compared to InP-ZnS QDs. Further, high-resolution energy dispersive X-ray (EDX) chemical maps directly show for the first time significant incorporation of indium into the shell of the InP-ZnSe QDs. Examination of the atomic structure of the thick-shell QDs by high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM) reveals structural defects in subpopulations of particles that may mitigate PL efficiencies (∼40% in ensemble), providing insight toward further synthetic refinement. These InP-ZnSe heterostructures represent progress toward fully cadmium-free QDs with superior photophysical properties important in biological labeling and other emission-based technologies.

Single Quantum Dot Tracking Illuminates Neuroscience at the Nanoscale.

The use of nanometer-sized semiconductor crystals, known as quantum dots, allows us to directly observe individual biomolecular transactions through a fluorescence microscope. Here, we review the evolution of single quantum dot tracking over the past two decades, highlight key biophysical discoveries facilitated by quantum dots, briefly discuss biochemical and optical implementation strategies for a single quantum dot tracking experiment, and report recent accomplishments of our group at the interface of molecular neuroscience and nanoscience.

Design of a Hole Trapping Ligand.

A new ligand that covalently attaches to the surface of colloidal CdSe/CdS nanorods and can simultaneously chelate a molecular metal center is described. The dithiocarbamate-bipyridine ligand system facilitates hole transfer through energetic overlap at the inorganic-organic interface and conjugation through the organic ligand to a chelated metal center. Density functional theory calculations show that the coordination of the free ligand to a CdS surface causes the formation of two hybridized molecular states that lie in the band gap of CdS. The further chelation of Fe(II) to the bipyridine moiety causes the presence of seven midgap states. Hole transfer from the CdS valence band to the midgap states is dipole allowed and occurs at a faster rate than what is experimentally known for the CdSe/CdS band-edge radiative recombination. In the case of the ligand bound with iron, a two-step process emerges that places the hole on the iron, again at rates much faster than band gap recombination. The system was experimentally assembled and characterized via UV-vis absorbance spectroscopy, fluorescence spectroscopy, time-resolved photoluminescence spectroscopy, and energy dispersive X-ray spectroscopy. Theoretically predicted red shifts in absorbance were observed experimentally, as well as the expected quench in photoluminescence and lifetimes in time-resolved photoluminescence.

Synthetic Strategies for Semiconductor Nanocrystals Expressing Localized Surface Plasmon Resonance.

The field of semiconductor plasmonics has grown rapidly since its outset, only roughly six years ago, and now includes many crystalline substances ranging from GeTe to wide-bandgap transition-metal oxides. One byproduct of this proliferation is the sea of differing synthetic methods to realize localized surface plasmon resonances (LSPRs) based on the studied material. Strategies vary widely from material to material, but all have the common goal of introducing extremely high carrier densities to the semiconductor system. This doping results in tunable, size-quantized, and on/off-switchable LSPR modes, which are a complete departure from traditional metal-nanoparticle-based plasmon resonances. This Minireview will provide an overview of the current state of nanocrystal and quantum-dot plasmonics and the physical basis thereof, however its main purpose is to summarize the methods for realizing LSPRs in the various syntheses and systems that have been reported to date.

Electrical Control of near-Field Energy Transfer between Quantum Dots and Two-Dimensional Semiconductors.

We investigate near-field energy transfer between chemically synthesized quantum dots (QDs) and two-dimensional semiconductors. We fabricate devices in which electrostatically gated semiconducting monolayer molybdenum disulfide (MoS2) is placed atop a homogeneous self-assembled layer of core-shell CdSSe QDs. We demonstrate efficient nonradiative Förster resonant energy transfer (FRET) from QDs into MoS2 and prove that modest gate-induced variation in the excitonic absorption of MoS2 leads to large (∼500%) changes in the FRET rate. This in turn allows for up to ∼75% electrical modulation of QD photoluminescence intensity. The hybrid QD/MoS2 devices operate within a small voltage range, allow for continuous modification of the QD photoluminescence intensity, and can be used for selective tuning of QDs emitting in the visible-IR range.

Plasmonic Cu(x)In(y)S2 quantum dots make better photovoltaics than their nonplasmonic counterparts.

A synthetic approach has recently been developed which results in Cu(x)In(y)S2 quantum dots (QDs) possessing localized surface plasmon resonance (LSPR) modes in the near-infrared (NIR) frequencies.1 In this study, we investigate the potential benefits of near-field plasmonic effects centered upon light absorbing nanoparticles in a photovoltaic system by developing and verifying nonplasmonic counterparts as an experimental control. Simple QD-sensitized solar cells (QD-SSCs) were assembled which show an 11.5% relative increase in incident photon conversion efficiency (IPCE) achieved in the plasmon-enhanced devices. We attribute this increase in IPCE to augmented charge excitation stemming from near-field "antenna" effects in the plasmonic Cu(x)In(y)S2 QD-SSCs. This study represents the first of its kind; direct interrogation of the influence of plasmon-on-semiconductor architectures with respect to excitonic absorption in photovoltaic systems.

Where's the silver? Imaging trace silver coverage on the surface of gold nanorods.

The development of the seeded growth synthesis for gold nanorods provided the first simple, convenient wet chemistry route to these nanomaterials. Over the past decade, the original silver-assisted seeded growth procedure has been the subject of further modifications that have continuously expanded access to anisotropic gold nanoparticles; however, the role of silver in formation of gold nanorods remains poorly understood. We report the first experimental evidence on the position of silver present on gold nanorods using advanced energy dispersive X-ray spectroscopy. Our results indicate the deposition of silver ions on the surface shows no preference for a specific face or axis. Furthermore, we show that the "dog bone" structures developed from gold nanorod solutions show preferential deposition of silver atoms on the ends and in the crevices.

Quantum Dot Fluorescent Imaging: Using Atomic Structure Correlation Studies to Improve Photophysical Properties.

Efforts to study intricate, higher-order cellular functions have called for fluorescence imaging under physiologically relevant conditions such as tissue systems in simulated native buffers. This endeavor has presented novel challenges for fluorescent probes initially designed for use in simple buffers and monolayer cell culture. Among current fluorescent probes, semiconductor nanocrystals, or quantum dots (QDs), offer superior photophysical properties that are the products of their nanoscale architectures and chemical formulations. While their high brightness and photostability are ideal for these biological environments, even state of the art QDs can struggle under certain physiological conditions. A recent method correlating electron microscopy ultrastructure with single-QD fluorescence has begun to highlight subtle structural defects in QDs once believed to have no significant impact on photoluminescence (PL). Specific defects, such as exposed core facets, have been shown to quench QD PL in physiologically accurate conditions. For QD-based imaging in complex cellular systems to be fully realized, mechanistic insight and structural optimization of size and PL should be established. Insight from single QD resolution atomic structure and photophysical correlative studies provides a direct course to synthetically tune QDs to match these challenging environments.

Single molecule analysis of serotonin transporter regulation using antagonist-conjugated quantum dots reveals restricted, p38 MAPK-dependent mobilization underlying uptake activation.

The presynaptic serotonin (5-HT) transporter (SERT) is targeted by widely prescribed antidepressant medications. Altered SERT expression or regulation has been implicated in multiple neuropsychiatric disorders, including anxiety, depression and autism. Here, we implement a generalizable strategy that exploits antagonist-conjugated quantum dots (Qdots) to monitor, for the first time, single SERT proteins on the surface of serotonergic cells. We document two pools of SERT proteins defined by lateral mobility, one that exhibits relatively free diffusion, and a second, localized to cholesterol and GM1 ganglioside-enriched microdomains, that displays restricted mobility. Receptor-linked signaling pathways that enhance SERT activity mobilize transporters that, nonetheless, remain confined to membrane microdomains. Mobilization of transporters arises from a p38 MAPK-dependent untethering of the SERT C terminus from the juxtamembrane actin cytoskeleton. Our studies establish the utility of ligand-conjugated Qdots for analysis of the behavior of single membrane proteins and reveal a physical basis for signaling-mediated SERT regulation.

4-(4-(dimethylamino)phenyl)-1-methylpyridinium (APP+) is a fluorescent substrate for the human serotonin transporter.

Monoamine transporters terminate synaptic neurotransmission and are molecular targets for antidepressants and psychostimulants. Fluorescent reporters can monitor real-time transport and are amenable for high-throughput screening. However, until now, their use has mostly been successful to study the catecholamine transporters but not the serotonin (5HT) transporter. Here, we use fluorescence microscopy, electrophysiology, pharmacology, and molecular modeling to compare fluorescent analogs of 1-methyl-4-phenylpyridinium (MPP(+)) as reporters for the human serotonin transporter (hSERT) in single cells. The fluorescent substrate 4-(4-(dimethylamino)phenyl)-1-methylpyridinium (APP(+)) exhibits superior fluorescence uptake in hSERT-expressing HEK293 cells than other MPP(+) analogs tested. APP(+) uptake is Na(+)- and Cl(-)-dependent, displaced by 5HT, and inhibited by fluoxetine, suggesting APP(+) specifically monitors hSERT activity. ASP(+), which was previously used to study catecholamine transporters, is 10 times less potent than APP(+) at inhibiting 5HT uptake and has minimal hSERT-mediated uptake. Furthermore, in hSERT-expressing oocytes voltage-clamped to -60 mV, APP(+) induced fluoxetine-sensitive hSERT-mediated inward currents, indicating APP(+) is a substrate, whereas ASP(+) induced hSERT-mediated outward currents and counteracted 5HT-induced hSERT currents, indicating ASP(+) possesses activity as an inhibitor. Extra-precise ligand receptor docking of APP(+) and ASP(+) in an hSERT homology model showed both ASP(+) and APP(+) docked favorably within the active region; accordingly, comparable concentrations are required to elicit their opposite electrophysiological responses. We conclude APP(+) is better suited than ASP(+) to study hSERT transport fluorometrically.

Confirmation of disordered structure of ultrasmall CdSe nanoparticles from X-ray atomic pair distribution function analysis.

The atomic pair distribution function (PDF) analysis of X-ray powder diffraction data has been used to study the structure of small and ultra-small CdSe nanoparticles. A method is described that uses a wurtzite and zinc-blende mixed phase model to account for stacking faults in CdSe particles. The mixed-phase model successfully describes the structure of nanoparticles larger than 2 nm yielding a stacking fault density of about 30%. However, for ultrasmall nanoparticles smaller than 2 nm, the models cannot fit the experimental PDF showing that the structure is significantly modified from that of larger particles and the bulk. The observation of a significant change in the average structure at ultra-small size is likely to explain the unusual properties of the ultrasmall particles such as their white light emitting ability.