Imaging Radial Distribution Functions of Complex Particles by Relayed Dynamic Nuclear Polarization.

The physical properties of many modern multi-component materials are determined by their internal microstructure. Tools capable of characterizing complex nanoscale architectures in composite materials are, therefore, essential to design materials with targeted properties. Depending on the morphology and the composition, structures may be measured by laser diffraction, scattering methods, or by electron microscopy. However, it can be difficult to obtain contrast in materials where all the components are organic, which is typically the case for formulated pharmaceuticals, or multi-domain polymers. In nuclear magnetic resonance (NMR) spectroscopy, chemical shifts allow a clear distinction between organic components and can in principle provide the required chemical contrast. Here, we introduce a method to obtain radial images of the internal structure of multi-component particles from NMR measurements of the relay of nuclear hyperpolarization obtained from dynamic nuclear polarization. The method is demonstrated on two samples of hybrid core-shell particles composed of a core of polystyrene with a shell of mesostructured silica filled with the templating agent CTAB and is shown to yield accurate images of the core-shell structures with a nanometer resolution.

Metal-Induced Crystallization in Metal Oxides.

ConspectusThe properties of a material depend upon its physical characteristics, one of these being its crystalline state. Next generation solid-state technologies will integrate crystalline oxides into thermal sensitive processes and composite materials. Crystallization of amorphous phases of metal oxides in the solid state typically requires substantial energy input to induce the amorphous to crystalline phase transformation. In the case of silica, the transformation to α-quartz in a furnace occurs above 1300 °C and that of titania, above 400 °C. These calcination processes are costly in energy but also often degrade complex material architectures or compositions.Thus, low temperature crystallization techniques are required that preserve macro- and mesostructures and complex elemental composition (e.g., organic-, metal-, and semiconductor-metal oxide hybrids/composites). Some solution-based techniques exist to directly fabricate crystalline metal oxides. However, these are not always compatible with the specificities of the system or industrial constraints. A postsynthetic, solid-state approach that reduces crystallization temperature in metal oxides is metal-induced crystallization (MIC).MIC is the introduction of catalytic amounts of a cation, which can be an s-block, p-block, or d-block cation, that migrates through the solid metal oxide lattice. The cation is thought to temporarily break metal oxide bonds, allowing [MOx] polyhedra to rotate and reform bonds with neighboring [MOx] groups in a lower energy crystalline phase. Depending on the system, the cation can favor or defavor the formation of a particular crystalline phase, providing a means to tune the purity and crystalline phase ratios. An advantage of MIC is that, although the crystallization occurs in the solid state, the crystallization process can be accomplished for particle suspensions in liquid media. In this case, the energy required to induce the crystallization can come from, for example, a microwave or an ultrasound bath. The crystallization of particles in suspension avoids aggregation from particle-particle sintering. In the case of thin films, the energy for crystallization typically comes from a laser or calcination.MIC is only recently being used as a low temperature metal oxide crystallization technique, despite being widely used in the semiconductor industry. Here, the mechanism and previous studies in MIC are presented for titania, silica, and other oxides. The beauty of this technique is that it is extremely easy to employ: cations can be incorporated into the system postsynthetically and then are often expelled from the lattice upon phase conversion. We expect MIC to enrich materials for photochromic, optoelectronic, catalyst, biological, and other applications.

Origin of transparency in scattering biomimetic collagen materials.

Living tissues, heterogeneous at the microscale, usually scatter light. Strong scattering is responsible for the whiteness of bones, teeth, and brain and is known to limit severely the performances of biomedical optical imaging. Transparency is also found within collagen-based extracellular tissues such as decalcified ivory, fish scales, or cornea. However, its physical origin is still poorly understood. Here, we unveil the presence of a gap of transparency in scattering fibrillar collagen matrices within a narrow range of concentration in the phase diagram. This precholesteric phase presents a three-dimensional (3D) orientational order biomimetic of that in natural tissues. By quantitatively studying the relation between the 3D fibrillar network and the optical and mechanical properties of the macroscopic matrices, we show that transparency results from structural partial order inhibiting light scattering, while preserving mechanical stability, stiffness, and nonlinearity. The striking similarities between synthetic and natural materials provide insights for better understanding the occurring transparency.

Monitoring of CaCO3 Nanoscale Structuration through Real-Time Liquid Phase Transmission Electron Microscopy and Hyperpolarized NMR.

Calcium carbonate (CaCO3) is one of the most significant biominerals in nature. Living organisms are able to control its biomineralization by means of an organic matrix to tailor a myriad of hybrid functional materials. The soluble organic components are often proteins rich in acidic amino-acids such as l-aspartic acid. While several studies have demonstrated the influence of amino acids on the crystallization of calcium carbonate, nanoscopic insight of their impact on CaCO3 mineralization, in particular at the early stages, is still lacking. Herein, we implement liquid phase-transmission electron microscopy (LP-TEM) in order to visualize in real-time and at the nanoscale the prenucleation stages of CaCO3 formation. We observe that l-aspartic acid favors the formation of individual and aggregated prenucleation clusters which are found stable for several minutes before the transformation into amorphous nanoparticles. Combination with hyperpolarized solid state nuclear magnetic resonance (DNP NMR) and density functional theory (DFT) calculations allow shedding light on the underlying mechanism at the prenucleation stage. The promoting nature of l-aspartic acid with respect to prenucleation clusters is explained by specific interactions with both Ca2+ and carbonates and the stabilization of the Ca2+-CO32-/HCO3- ion pairs favoring the formation and stabilization of the CaCO3 transient precursors. The study of prenucleation stages of mineral formation by the combination of in situ LP-TEM, advanced analytical techniques (including hyperpolarized solid-state NMR), and numerical modeling allows the real-time monitoring of prenucleation species formation and evolution and the comprehension of their relative stability.

Ultrasound-Assisted Liquid-Phase Synthesis and Mechanical Properties of Aluminum Matrix Nanocomposites Incorporating Boride Nanocrystals.

Incorporating boride nanocrystals could significantly impact the mechanical properties of aluminum alloys. Molten salts synthesis offers opportunities to fabricate superhard boride nanoparticles, which can sustain the harsh conditions during the liquid-phase design of metallic nanocomposites. Here hafnium diboride-aluminum nanocomposites are unveiled from molten salt-derived HfB2 nanoparticles sequentially dispersed in aluminum by ultrasound treatment. The structure and size of the nanocrystals are retained in the final nanocomposites, supporting their high chemical stability. Semicoherent interfaces between the nanoparticles and the matrix are then evidenced by TEM, suggesting that the nanocrystals could promote heterogeneous nucleation of Al and then limit the Al grain size to ≈20 µm. Nanoindentation measurements reveal significant grain boundary strengthening and grain refinement effects. It is finally shown that HfB2 nanoparticles also enable a decrease in matrix grain size and an increase in the hardness of the AlSi7 Cu0.5 Mg0.3 alloy. These proof-of-concept materials are paving the way to light-weight Al matrix nanocomposites doped by molten-salt synthesized nanoparticles.

A Confinement-Driven Nucleation Mechanism of Metal Oxide Nanoparticles Obtained via Thermal Decomposition in Organic Media.

Thermal decomposition is a very efficient synthesis strategy to obtain nanosized metal oxides with controlled structures and properties. For the iron oxide nanoparticle synthesis, it allows an easy tuning of the nanoparticle's size, shape, and composition, which is often explained by the LaMer theory involving a clear separation between nucleation and growth steps. Here, the events before the nucleation of iron oxide nanocrystals are investigated by combining different complementary in situ characterization techniques. These characterizations are carried out not only on powdered iron stearate precursors but also on a preheated liquid reaction mixture. They reveal a new nucleation mechanism for the thermal decomposition method: instead of a homogeneous nucleation, the nucleation occurs within vesicle-like-nanoreactors confining the reactants. The different steps are: 1) the melting and coalescence of iron stearate particles, leading to "droplet-shaped nanostructures" acting as nanoreactors; 2) the formation of a hitherto unobserved iron stearate crystalline phase within the nucleation temperature range, simultaneously with stearate chains loss and Fe(III) to Fe(II) reduction; 3) the formation of iron oxide nuclei inside the nanoreactors, which are then ejected from them. This mechanism paves the way toward a better mastering of the metal oxide nanoparticles synthesis and the control of their properties.

Synthesis of enantiopure α-Tfm-proline and α-Tfm-pipecolic acid from oxazolo-pyrrolidines and -piperidines.

Enantiopure α-Tfm-proline and α-Tfm-pipecolic acid were synthesized starting from commercially available diesters and ethyl trifluoroacetate. A Strecker type reaction on intermediate chiral Tfm-oxazolo-pyrrolidine and -piperidine provided the corresponding nitrile precursor of enantiopure (R) and (S) α-Tfm-proline and α-Tfm-pipecolic acid. The C-terminal peptide coupling reaction of α-Tfm-pipecolic acid has been successfully achieved.

Self-Assembled Collagen Microparticles by Aerosol as a Versatile Platform for Injectable Anisotropic Materials.

Extracellular matrices (ECM) rich in type I collagen exhibit characteristic anisotropic ultrastructures. Nevertheless, working in vitro with this biomacromolecule remains challenging. When processed, denaturation of the collagen molecule is easily induced in vitro avoiding proper fibril self-assembly and further hierarchical order. Here, an innovative approach enables the production of highly concentrated injectable collagen microparticles, based on collagen molecules self-assembly, thanks to the use of spray-drying process. The versatility of the process is shown by performing encapsulation of secretion products of gingival mesenchymal stem cells (gMSCs), which are chosen as a bioactive therapeutic product for their potential efficiency in stimulating the regeneration of a damaged ECM. The injection of collagen microparticles in a cell culture medium results in a locally organized fibrillar matrix. The efficiency of this approach for making easily handleable collagen microparticles for encapsulation and injection opens perspectives in active tissue regeneration and 3D bioprinted scaffolds.

Nanocellulose, a Versatile Green Platform: From Biosources to Materials and Their Applications.

With increasing environmental and ecological concerns due to the use of petroleum-based chemicals and products, the synthesis of fine chemicals and functional materials from natural resources is of great public value. Nanocellulose may prove to be one of the most promising green materials of modern times due to its intrinsic properties, renewability, and abundance. In this review, we present nanocellulose-based materials from sourcing, synthesis, and surface modification of nanocellulose, to materials formation and applications. Nanocellulose can be sourced from biomass, plants, or bacteria, relying on fairly simple, scalable, and efficient isolation techniques. Mechanical, chemical, and enzymatic treatments, or a combination of these, can be used to extract nanocellulose from natural sources. The properties of nanocellulose are dependent on the source, the isolation technique, and potential subsequent surface transformations. Nanocellulose surface modification techniques are typically used to introduce either charged or hydrophobic moieties, and include amidation, esterification, etherification, silylation, polymerization, urethanization, sulfonation, and phosphorylation. Nanocellulose has excellent strength, high Young's modulus, biocompatibility, and tunable self-assembly, thixotropic, and photonic properties, which are essential for the applications of this material. Nanocellulose participates in the fabrication of a large range of nanomaterials and nanocomposites, including those based on polymers, metals, metal oxides, and carbon. In particular, nanocellulose complements organic-based materials, where it imparts its mechanical properties to the composite. Nanocellulose is a promising material whenever material strength, flexibility, and/or specific nanostructuration are required. Applications include functional paper, optoelectronics, and antibacterial coatings, packaging, mechanically reinforced polymer composites, tissue scaffolds, drug delivery, biosensors, energy storage, catalysis, environmental remediation, and electrochemically controlled separation. Phosphorylated nanocellulose is a particularly interesting material, spanning a surprising set of applications in various dimensions including bone scaffolds, adsorbents, and flame retardants and as a support for the heterogenization of homogeneous catalysts.

Direct Synthesis of N-Heterocyclic Carbene-Stabilized Copper Nanoparticles from an N-Heterocyclic Carbene-Borane.

N-Heterocyclic carbene (NHC)-stabilized copper nanoparticles (NPs) were synthesized from an NHC-borane adduct and mesitylcopper(I) under thermal conditions (refluxing toluene for 2.5 h). NPs with a size distribution of 11.6±1.8 nm were obtained. The interaction between Cu NPs and NHC ligands was probed by X-ray photoelectron spectroscopy, which showed covalent binding of the NHC to the surface of the NPs. Mechanistic studies suggested that NHC-borane plays two roles: contributing to the reduction of [CuMes]2 to release Cu0 species and providing NHC ligands to stabilize the copper NPs.

Different Reactivity of Rutile and Anatase TiO2 Nanoparticles: Synthesis and Surface States of Nanoparticles of Mixed-Valence Magnéli Oxides.

Magnéli phases Tin O2n-1 (3

Interdiffusive Surfactant Procedure for the Preparation of Nanoarchitectured Porous Films: Application to the Growth of Titania Thin Films on Silicon Substrates.

Herein is reported the preparation of nanostructured mesoporous supported films, in this case, titanium dioxide nanoparticles on silicon wafer, according to a new approach taking place in two consecutive deposition steps: (i) coating of a homogeneous and continuous layer of a surfactant on the selected support and (ii) building up of a second layer of the fresh metal-oxide gel precursor, followed by thermal treatment to generate porosity. This approach represents an alternative way to soft-template procedures, as for instance, the largely applied evaporation-induced self-assembly (EISA) method, which typically consists of a single-step deposition of the mixture of gel precursor and surfactant used as a soft template to create porosity. The main advantage of the procedure reported here compared to the EISA method is the possibility of reaching tunable textural characteristics along the growing film (pore size, shape, and distribution of pores) by using gels with nanoparticles preformed at different stages via a simple regulation of the residence time of the precursors deposited on the support containing the surfactant.

Aerosol processing: a wind of innovation in the field of advanced heterogeneous catalysts.

Aerosol processing is long known and implemented industrially to obtain various types of divided materials and nanomaterials. The atomisation of a liquid solution or suspension produces a mist of aerosol droplets which can then be transformed via a diversity of processes including spray-drying, spray pyrolysis, flame spray pyrolysis, thermal decomposition, micronisation, gas atomisation, etc. The attractive technical features of these aerosol processes make them highly interesting for the continuous, large scale, and tailored production of heterogeneous catalysts. Indeed, during aerosol processing, each liquid droplet undergoes well-controlled physical and chemical transformations, allowing for example to dry and aggregate pre-existing solid particles or to synthesise new micro- or nanoparticles from mixtures of molecular or colloidal precursors. In the last two decades, more advanced reactive aerosol processes have emerged as innovative means to synthesise tailored-made nanomaterials with tunable surface properties, textures, compositions, etc. In particular, the "aerosol-assisted sol-gel" process (AASG) has demonstrated tremendous potential for the preparation of high-performance heterogeneous catalysts. The method is mainly based on the low-cost, scalable, and environmentally benign sol-gel chemistry process, often coupled with the evaporation-induced self-assembly (EISA) concept. It allows producing micronic or submicronic, inorganic or hybrid organic-inorganic particles bearing tuneable and calibrated porous structures at different scales. In addition, pre-formed nanoparticles can be easily incorporated or formed in a "one-pot" bottom-up approach within the porous inorganic or hybrid spheres produced by such spray drying method. Thus, multifunctional catalysts with tailored catalytic activities can be prepared in a relatively simple way. This account is an overview of aerosol processed heterogeneous catalysts which demonstrated interesting performance in various relevant chemical reactions like isomerisation, hydrogenation, olefin metathesis, pollutant total oxidation, selective oxidation, CO2 methanation, etc. A short survey of patents and industrial applications is also presented. Our objective is to demonstrate the tremendous possibilities offered by the coupling between bottom up synthesis routes and these aerosol processing technologies which will most probably represent a major route of innovation in the mushrooming field of catalyst preparation research.

Gold-silica quantum rattles for multimodal imaging and therapy.

Gold quantum dots exhibit distinctive optical and magnetic behaviors compared with larger gold nanoparticles. However, their unfavorable interaction with living systems and lack of stability in aqueous solvents has so far prevented their adoption in biology and medicine. Here, a simple synthetic pathway integrates gold quantum dots within a mesoporous silica shell, alongside larger gold nanoparticles within the shell's central cavity. This "quantum rattle" structure is stable in aqueous solutions, does not elicit cell toxicity, preserves the attractive near-infrared photonics and paramagnetism of gold quantum dots, and enhances the drug-carrier performance of the silica shell. In vivo, the quantum rattles reduced tumor burden in a single course of photothermal therapy while coupling three complementary imaging modalities: near-infrared fluorescence, photoacoustic, and magnetic resonance imaging. The incorporation of gold within the quantum rattles significantly enhanced the drug-carrier performance of the silica shell. This innovative material design based on the mutually beneficial interaction of gold and silica introduces the use of gold quantum dots for imaging and therapeutic applications.

Hierarchically porous materials: synthesis strategies and structure design.

Owing to their immense potential in energy conversion and storage, catalysis, photocatalysis, adsorption, separation and life science applications, significant interest has been devoted to the design and synthesis of hierarchically porous materials. The hierarchy of materials on porosity, structural, morphological, and component levels is key for high performance in all kinds of applications. Synthesis and applications of hierarchically structured porous materials have become a rapidly evolving field of current interest. A large series of synthesis methods have been developed. This review addresses recent advances made in studies of this topic. After identifying the advantages and problems of natural hierarchically porous materials, synthetic hierarchically porous materials are presented. The synthesis strategies used to prepare hierarchically porous materials are first introduced and the features of synthesis and the resulting structures are presented using a series of examples. These involve templating methods (surfactant templating, nanocasting, macroporous polymer templating, colloidal crystal templating and bioinspired process, i.e. biotemplating), conventional techniques (supercritical fluids, emulsion, freeze-drying, breath figures, selective leaching, phase separation, zeolitization process, and replication) and basic methods (sol-gel controlling and post-treatment), as well as self-formation phenomenon of porous hierarchy. A series of detailed examples are given to show methods for the synthesis of hierarchically porous structures with various chemical compositions (dual porosities: micro-micropores, micro-mesopores, micro-macropores, meso-mesopores, meso-macropores, multiple porosities: micro-meso-macropores and meso-meso-macropores). We hope that this review will be helpful for those entering the field and also for those in the field who want quick access to helpful reference information about the synthesis of new hierarchically porous materials and methods to control their structure and morphology.

Maximizing the Photocatalytic Activity of Metal-Organic Frameworks with Aminated-Functionalized Linkers: Substoichiometric Effects in MIL-125-NH2.

Despite the promise of utilizing metal-organic frameworks (MOFs) as highly tunable photocatalytic materials, systematic studies that interrogate the relationship between their catalytic performances and the amount of functionalized linkers are lacking. Aminated linkers are known to enhance the absorption of light and afford photocatalysis with MOFs under visible-light irradiation. However, the manner in which the photocatalytic performances are impacted by the amount of such linkers is poorly understood. Here, we assess the photocatalytic activity of MIL-125, a TiO2/1,4-benzenedicarboxylate (bdc) MOF for the oxidation of benzyl alcohol to benzaldehyde when increasing amounts of bdc-NH2 linkers (0%, 20%, 46%, 70%, and 100%) are incorporated in the framework. Analytical TEM allowed assessing the homogeneous localization of bdc-NH2 in these mixed-linker MOFs. Steady state reaction rates reveal two regimes of catalytic performances: a first linear regime up to ∼50% bdc-NH2 into the hybrid framework whereby increased amounts of bdc-NH2 yielded increased photocatalytic rates, followed by a plateau up to 100% bdc-NH2. This unexpected "saturation" of the catalytic activity above ∼50% bdc-NH2 content in the framework whatever the wavelength filters used demonstrates that amination of all linkers of the MOF is not required to obtain the maximum photocatalytic activity. This is rationalized on the basis of mixed-valence Ti3+/Ti4+ intermediate catalytic centers revealed by electron spin resonance (ESR) measurements and recent knowledge of lifetime excited states in MIL-125-type of solids.

Quantified Binding Scale of Competing Ligands at the Surface of Gold Nanoparticles: The Role of Entropy and Intermolecular Forces.

A basic understanding of the driving forces for the formation of multiligand coronas or self-assembled monolayers over metal nanoparticles is mandatory to control and predict the properties of ligand-protected nanoparticles. Herein, 1 H nuclear magnetic resonance experiments and advanced density functional theory (DFT) modeling are combined to highlight the key parameters defining the efficiency of ligand exchange on dispersed gold nanoparticles. The compositions of the surface and of the liquid reaction medium are quantitatively correlated for bifunctional gold nanoparticles protected by a range of competing thiols, including an alkylthiol, arylthiols of varying chain length, thiols functionalized by ethyleneglycol units, and amide groups. These partitions are used to build scales that quantify the ability of a ligand to exchange dodecanethiol. Such scales can be used to target a specific surface composition by choosing the right exchange conditions (ligand ratio, concentrations, and particle size). In the specific case of arylthiols, the exchange ability scale is exploited with the help of DFT modeling to unveil the roles of intermolecular forces and entropic effects in driving ligand exchange. It is finally suggested that similar considerations may apply to other ligands and to direct biligand synthesis.

In Situ Solid-Gas Reactivity of Nanoscaled Metal Borides from Molten Salt Synthesis.

Metal borides have mostly been studied as bulk materials. The nanoscale provides new opportunities to investigate the properties of these materials, e.g., nanoscale hardening and surface reactivity. Metal borides are often considered stable solids because of their covalent character, but little is known on their behavior under a reactive atmosphere, especially reductive gases. We use molten salt synthesis at 750 °C to provide cobalt monoboride (CoB) nanocrystals embedded in an amorphous layer of cobalt(II) and partially oxidized boron as a model platform to study morphological, chemical, and structural evolutions of the boride and the superficial layer exposed to argon, dihydrogen (H2), and a mixture of H2 and carbon dioxide (CO2) through a multiscale in situ approach: environmental transmission electron microscopy, synchrotron-based near-ambient-pressure X-ray photoelectron spectroscopy, and near-edge X-ray absorption spectroscopy. Although the material is stable under argon, H2 triggers at 400 °C decomposition of CoB, leading to cobalt(0) nanoparticles. We then show that H2 activates CoB for the catalysis of CO2 methanation. A similar decomposition process is also observed on NiB nanocrystals under oxidizing conditions at 300 °C. Our work highlights the instability under reactive atmospheres of nanocrystalline cobalt and nickel borides obtained from molten salt synthesis. Therefore, we question the general stability of metal borides with distinct compositions under such conditions. These results shed light on the actual species in metal boride catalysis and provide the framework for future applications of metal borides in their stability domains.

Synthesis of Ce2O2S and Gd2(1-y)Ce2yO2S Nanoparticles and Reactivity from in Situ X-ray Absorption Spectroscopy and X-ray Photoelectron Spectroscopy.

Lanthanide oxysulfide nanoparticles have recently attracted interest in view of their potential applications, such as lighting devices and MRI contrast agents, which requires a good stability in air and a controlled surface. In order to address these issues, in this work, air-sensitive Ce2O2S nanoparticles of hexagonal shape were successfully prepared and characterized under inert conditions. Bimetallic Gd2(1-y)Ce2yO2S nanoparticles of similar shape and size were also synthesized for the whole composition range (y from 0 to 1). X-ray diffraction structural data are found to follow Vegard's law up to y = 0.4, which is attributed to the loss of stability in air of Ce-rich nanocrystals beyond this threshold. This picture is supported by X-ray absorption spectra taken at the S K-edge and Ce L3-edge that show the partial oxidation of sulfide species and of CeIII to CeIV in the presence of air or water. A complementary near-ambient-pressure X-ray photoelectron spectroscopy study shows that at least two types of oxidized sulfur species form on the nanoparticle surface. Even in Gd2O2S nanoparticles that are generally considered to be air-stable, we found that sulfide ions are partially oxidized to sulfate in air. These results unveil the physicochemical mechanisms responsible for the surface reactivity of lanthanide oxysulfides nanoparticles in air.

A 19th Century "Ideal" Oil Paint Medium: A Complex Hybrid Organic-Inorganic Gel.

British 19th century painters such as J. M. W. Turner, commonly modified the properties of their paint by using gels called "gumtions". These gels allowed them to easily tune the paint handling and drying properties. The fascinating properties of these "gumtions" were obtained by adding lead acetate to a ternary system based on mastic resin, linseed oil and turpentine. Herein, we report and investigate in depth the rheological properties of these gels as well as their structure at a molecular and supra-molecular scale.