Discrepancies between frame- and CBCT-based stereotactic space definition on the Gamma Knife Icon.

PURPOSE: To assess differences between frame-based and cone beam computed tomography (CBCT)-defined stereotactic space and to identify predictors of the observed findings. METHODS AND MATERIALS: Differences between frame-based and CBCT-defined stereotactic space after image co-registration were reviewed for 529 patients. Treatment planning system reported the information about the shifts in X, Y, and Z coordinates of the center of the stereotactic space (i.e., coordinate X = 100 mm, Y = 100 mm, and Z = 100 mm) defined by the frame, and the maximum shot displacement (MSD) in mm. We collected the potential predictors of the differences. In total, 19 factors were investigated. We used multiple linear regression to evaluate associations with the increased differences. RESULTS: Rotational and translational shifts greater than 1° and 1 mm, respectively, were observed in 2.6% of patients. At the same time, a decrease in tumor coverage of more than 5% was detected in 8.3% of cases. It was revealed that the higher fiducial errors (both mean and maximum), the greater weight of the patient, and the lower Karnofsky Performance Scale were predictors of increased rotational, translational shifts, and the MSD.

Saving the Energy Loss in Lithium-Mediated Nitrogen Fixation by Using a Highly Reactive Li3 N Intermediate for C-N Coupling Reactions.

Direct synthesis of N-containing organic compounds from dinitrogen (N2 ) can make synthetic chemistry more sustainable. Previous bottlenecks in lithium-mediated N2 fixation were resolved by loading Li-metal anodes covered with the typical Li+ ion-conducting solid electrolyte interface, which are subsequently allowed to react with N2 . The developed strategy allowed us to reach high Faradaic efficiencies toward Li3 N. These reactive Li3 N were then contacted with acylchlorides. Surface nitride ions are more nucleophilic than amines which direct the two C-N coupling reactions toward formation of imides rather than amides, and an integrated current efficiency of 57-77 % could be realized. This study thereby not only provides a feasible electrochemical Li3 N synthesis, but also delineates an economical and green synthesis of highly valuable N-containing compounds from N2 under mild conditions, just using commercial spare parts and processes from the omnipresent Li battery technology.

Chromoselective Synthesis of Sulfonyl Chlorides and Sulfonamides with Potassium Poly(heptazine imide) Photocatalyst.

Among external stimuli used to promote a chemical reaction, photocatalysis possesses a unique one-light. Photons are traceless reagents that provide an exclusive opportunity to alter chemoselectivity of the photocatalytic reaction varying the color of incident light. This strategy may be implemented by using a sensitizer capable to activate a specific reaction pathway depending on the excitation light. Herein, we use potassium poly(heptazine imide) (K-PHI), a type of carbon nitride, to generate selectively three different products from S-arylthioacetates simply varying the excitation light and otherwise identical conditions. Namely, arylchlorides are produced under UV/purple, sulfonyl chlorides with blue/white, and diaryldisulfides at green to red light. A combination of the negatively charged polyanion, highly positive potential of the valence band, presence of intraband states, ability to sensitize singlet oxygen, and multi-electron transfer is shown to enable this chromoselective conversion of thioacetates.

Unconventional Photocatalysis in Conductive Polymers: Reversible Modulation of PEDOT:PSS Conductivity by Long-Lived Poly(Heptazine Imide) Radicals.

In photocatalysis, small organic molecules are converted into desired products using light responsive materials, electromagnetic radiation, and electron mediators. Substitution of low molecular weight reagents with redox active functional materials may increase the utility of photocatalysis beyond organic synthesis and environmental applications. Guided by the general principles of photocatalysis, we design hybrid nanocomposites composed of n-type semiconducting potassium poly(heptazine imide) (K-PHI), and p-type conducting poly(3,4-ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS) as the redox active substrate. Electrical conductivity of the hybrid nanocomposite, possessing optimal K-PHI content, is reversibly modulated combining a series of external stimuli ranging from visible light under inert conditions and to dark conditions under an O2 atmosphere. Using a conductive polymer as the redox active substrate allows study of the photocatalytic processes mediated by semiconducting photocatalysts through electrical conductivity measurements.

Solar Reforming of Biomass with Homogeneous Carbon Dots.

A sunlight-powered process is reported that employs carbon dots (CDs) as light absorbers for the conversion of lignocellulose into sustainable H2 fuel and organics. This photocatalytic system operates in pure and untreated sea water at benign pH (2-8) and ambient temperature and pressure. The CDs can be produced in a scalable synthesis directly from biomass itself and their solubility allows for good interactions with the insoluble biomass substrates. They also display excellent photophysical properties with a high fraction of long-lived charge carriers and the availability of a reductive and an oxidative quenching pathway. The presented CD-based biomass photoconversion system opens new avenues for sustainable, practical, and renewable fuel production through biomass valorization.

Potassium Poly(Heptazine Imide): Transition Metal-Free Solid-State Triplet Sensitizer in Cascade Energy Transfer and [3+2]-cycloadditions.

Polymeric carbon nitride materials have been used in numerous light-to-energy conversion applications ranging from photocatalysis to optoelectronics. For a new application and modelling, we first refined the crystal structure of potassium poly(heptazine imide) (K-PHI)-a benchmark carbon nitride material in photocatalysis-by means of X-ray powder diffraction and transmission electron microscopy. Using the crystal structure of K-PHI, periodic DFT calculations were performed to calculate the density-of-states (DOS) and localize intra band states (IBS). IBS were found to be responsible for the enhanced K-PHI absorption in the near IR region, to serve as electron traps, and to be useful in energy transfer reactions. Once excited with visible light, carbon nitrides, in addition to the direct recombination, can also undergo singlet-triplet intersystem crossing. We utilized the K-PHI centered triplet excited states to trigger a cascade of energy transfer reactions and, in turn, to sensitize, for example, singlet oxygen (1 O2 ) as a starting point to synthesis up to 25 different N-rich heterocycles.

Electron Deficient Monomers that Optimize Nucleation and Enhance the Photocatalytic Redox Activity of Carbon Nitrides.

Polymeric carbon nitride (PCN) is usually synthesized from nitrogen-rich monomers such as cyanamide, melamine, and urea, but is rather disordered in many cases. Now, a new allotrope of carbon nitride with internal heterostructures was obtained by co-condensation of very electron poor monomers (for example, 5-amino-tetrazole and nucleobases) in the presence of mild molten salts (for example, NaCl/KCl) to mediate the polymerization kinetics and thus modulate the local structure, charge carrier properties, and most importantly the HOMO and LUMO levels. Results reveal that the as-prepared NaK-PHI-A material shows excellent photo-redox activities because of a nanometric hetero-structure which enhances visible light absorption and promotes charge separation in the different domains.

Semi-heterogeneous Dual Nickel/Photocatalysis using Carbon Nitrides: Esterification of Carboxylic Acids with Aryl Halides.

Cross-coupling reactions mediated by dual nickel/photocatalysis are synthetically attractive but rely mainly on expensive, non-recyclable noble-metal complexes as photocatalysts. Heterogeneous semiconductors, which are commonly used for artificial photosynthesis and wastewater treatment, are a sustainable alternative. Graphitic carbon nitrides, a class of metal-free polymers that can be easily prepared from bulk chemicals, are heterogeneous semiconductors with high potential for photocatalytic organic transformations. Here, we demonstrate that graphitic carbon nitrides in combination with nickel catalysis can induce selective C-O cross-couplings of carboxylic acids with aryl halides, yielding the respective aryl esters in excellent yield and selectivity. The heterogeneous organic photocatalyst exhibits a broad substrate scope, is able to harvest green light, and can be recycled multiple times. In situ FTIR was used to track the reaction progress to study this transformation at different irradiation wavelengths and reaction scales.

Tailoring the Grain Boundary Chemistry of Polymeric Carbon Nitride for Enhanced Solar Hydrogen Production and CO2 Reduction.

Photocatalytic water splitting is a promising and clean way to mimic plant photosynthesis in a sustainable manner. Improvements of the quantum efficiency and optical absorption in the relevant range are necessary steps to approach practicality. Herein, we reported that these issues can be readily addressed when 5-aminotetrazole, a monomer with high nitrogen content, is used for the synthesis of carbon nitride. The molten salt mixture NaCl/KCl is used as a high-temperature solvent to tailor the grain boundary structure and chemistry. Visible light quantum efficiency for H2 production of 0.65 could be obtained in the presence of K2 HPO4 as a double layer modifier. This value is very high, considering that this number depends on light to charge couple conversion, charge localization, as well as a successful oxidation and reduction reaction.

Identification and Directed Development of Non-Organic Catalysts with Apparent Pan-Enzymatic Mimicry into Nanozymes for Efficient Prodrug Conversion.

Nanozymes, nanoparticles that mimic the natural activity of enzymes, are intriguing academically and are important in the context of the Origin of Life. However, current nanozymes offer mimicry of a narrow range of mammalian enzymes, near-exclusively performing redox reactions. We present an unexpected discovery of non-proteinaceous enzymes based on metals, metal oxides, 1D/2D-materials, and non-metallic nanomaterials. The specific novelty of these findings lies in the identification of nanozymes with apparent mimicry of diverse mammalian enzymes, including unique pan-glycosidases. Further novelty lies in the identification of the substrate scope for the lead candidates, specifically in the context of bioconversion of glucuronides, that is, human metabolites and privileged prodrugs in the field of enzyme-prodrug therapies. Lastly, nanozymes are employed for conversion of glucuronide prodrugs into marketed anti-inflammatory and antibacterial agents, as well as "nanozyme prodrug therapy" to mediate antibacterial measures.

Photoredox Catalytic Organic Transformations using Heterogeneous Carbon Nitrides.

Photoredox catalysis comprising homogeneous transition-metal-based systems, organic dyes, and semiconductors, has become a universal tool to catalyze a wide variety of chemical reactions with high selectivity and under mild conditions using visible light irradiation. This Minireview summarizes recent progress in photoredox catalysis mediated by heterogeneous carbon nitride materials such as mesoporous graphitic carbon nitride (mpg-CN), polymeric carbon nitride, and potassium poly(heptazine imides) (K-PHI). Because of the high thermal, chemical, and photostability of these materials, as well as favorable conduction and valence band positions, carbon nitrides expand the reaction range of photocatalysis to many novel reactions, such as photocatalytic activation of elemental sulfur to furnish a convenient chemical route to organosulfur compounds.

Ionothermal Synthesis of Triazine-Heptazine-Based Copolymers with Apparent Quantum Yields of 60 % at 420†nm for Solar Hydrogen Production from "Sea Water".

Polymeric carbon nitride (PCN), in either triazine or heptazine form, has been regarded as a promising metal-free, environmentally benign, and sustainable photocatalyst for solar hydrogen production. However, PCN in most cases only exhibits moderate activity owing to its inherent properties, such as rapid charge carrier recombination. Herein we present a triazine-heptazine copolymer synthesized by simple post-calcination of PCN in eutectic salts, that is, NaCl/KCl, to modulate the polymerization process and optimize the structure. The construction of an internal triazine-heptazine donor-acceptor (D-A) heterostructure was affirmed to significantly accelerate interface charge transfer (CT) and thus boost the photocatalytic activity (AQY=60 % at 420 nm). This study highlights the construction of intermolecular D-A copolymers in NaCl/KCl molten salts with higher melting points but in the absence of lithium to modulate the chemical structure and properties of PCN.

Template- and Metal-Free Synthesis of Nitrogen-Rich Nanoporous "Noble" Carbon Materials by Direct Pyrolysis of a Preorganized Hexaazatriphenylene Precursor.

The targeted thermal condensation of a hexaazatriphenylene-based precursor leads to porous and oxidation-resistant ("noble") carbons. Simple condensation of the pre-aligned molecular precursor produces nitrogen-rich carbons with C2 N-type stoichiometry. Despite the absence of any porogen and metal species involved in the synthesis, the specific surface areas of the molecular carbons reach up to 1000 m2 g-1 due to the significant microporosity of the materials. The content and type of nitrogen species is controllable by the carbonization temperature whilst porosity remains largely unaffected at the same time. The resulting noble carbons are distinguished by a highly polarizable micropore structure and have thus high adsorption affinity towards molecules such as H2 O and CO2 . This molecular precursor approach opens new possibilities for the synthesis of porous noble carbons under molecular control, providing access to the special physical properties of the C2 N structure and extending the known spectrum of classical porous carbons.

Optimizing Optical Absorption, Exciton Dissociation, and Charge Transfer of a Polymeric Carbon Nitride with Ultrahigh Solar Hydrogen Production Activity.

Polymeric or organic semiconductors are promising candidates for photocatalysis but mostly only show moderate activity owing to strongly bound excitons and insufficient optical absorption. Herein, we report a facile bottom-up strategy to improve the activity of a carbon nitride to a level in which a majority of photons are really used to drive photoredox chemistry. Co-condensation of urea and oxamide followed by post-calcination in molten salt is shown to result in highly crystalline species with a maximum π-π layer stacking distance of heptazine units of 0.292 nm, which improves lateral charge transport and interlayer exciton dissociation. The addition of oxamide decreases the optical band gap from 2.74 to 2.56 eV, which enables efficient photochemistry also with green light. The apparent quantum yield (AQY) for H2 evolution of optimal samples reaches 57 % and 10 % at 420 nm and 525 nm, respectively, which is significantly higher than in most previous experiments.

Synthesis of Sulfonyl Chlorides from Aryldiazonium Salts Mediated by a Heterogeneous Potassium Poly(heptazine imide) Photocatalyst.

Visible light photocatalysis is a tool in synthetic chemistry that allows us to utilize the energy of photons via photoinduced electron transfer to promote diverse organic reactions. Herein, a heterogeneous transition metal-free material, a type of carbon nitride photocatalyst, potassium poly(heptazine imide), is employed to produce sulfonyl chlorides from arenediazonium salts under mild conditions (visible light irradiation, room temperature) with 50-95% yields. The method is suitable for the synthesis of both electron rich and electron deficient compounds, and it shows high tolerance toward different functional groups (halides, ester, nitro, cyano groups). Thus, a sustainable photocatalytic alternative to the Meerwein chlorosulfonylation reaction is offered.

Progress in Development of Photocatalytic Processes for Synthesis of Fuels and Organic Compounds under Outdoor Solar Light.

With photovoltaics becoming a mature, commercially feasible technology, society is willing to allocate resources for developing and deploying new technologies based on using solar light. Analysis of projects supported by the European Commission in the past decade indicates exponential growth of funding to photocatalytic (PC) and photoelectrocatalytic (PEC) technologies that aim either at technology readiness levels (TRLs) TRL 1-3 or TRL > 3, with more than 75 Mio€ allocated from the year 2019 onward. This review provides a summary of PC and PEC processes for the synthesis of bulk commodities such as solvents and fuels, as well as chemicals for niche applications. An overview of photoreactors for photocatalysis on a larger scale is provided. The review rounds off with the summary of reactions performed at lab scale under natural outdoor solar light to illustrate conceptual opportunities offered by solar-driven chemistry beyond the reduction of CO2 and water splitting. The authors offer their vision of the impact of this area of research on society and the economy.

Mesoporous Graphitic Carbon Nitride as a Heterogeneous Organic Photocatalyst in the Dual Catalytic Arylation of Alkyl Bis(catecholato)silicates.

Mesoporous graphitic carbon nitride (mpg-CN) is introduced as a heterogeneous photocatalyst to perform dual photoredox- and nickel-catalyzed cross-coupling reactions between alkyl bis(catecholato)silicates as radical precursors and aryl or alkenyl bromides. The synergy between this recyclable photocatalyst and the broadly applied homogeneous nickel complex [Ni(dtbbpy)Br2] gives access to C(sp2)-C(sp3) cross-coupling products in a sustainable fashion. The recycled mpg-CN photocatalyst was analyzed by time-resolved emission spectroscopy and EPR spectroscopy.

Red edge effect and chromoselective photocatalysis with amorphous covalent triazine-based frameworks.

Chromoselective photocatalysis offers an intriguing opportunity to enable a specific reaction pathway out of a potentially possible multiplicity for a given substrate by using a sensitizer that converts the energy of incident photon into the redox potential of the corresponding magnitude. Several sensitizers possessing different discrete redox potentials (high/low) upon excitation with photons of specific wavelength (short/long) have been reported. Herein, we report design of molecular structures of two-dimensional amorphous covalent triazine-based frameworks (CTFs) possessing intraband states close to the valence band with strong red edge effect (REE). REE enables generation of a continuum of excited sites characterized by their own redox potentials, with the magnitude proportional to the wavelength of incident photons. Separation of charge carriers in such materials depends strongly on the wavelength of incident light and is the primary parameter that defines efficacy of the materials in photocatalytic bromination of electron rich aromatic compounds. In dual Ni-photocatalysis, excitation of electrons from the intraband states to the conduction band of the CTF with 625 nm photons enables selective formation of C‒N cross-coupling products from arylhalides and pyrrolidine, while an undesirable dehalogenation process is completely suppressed.

Multisite PCET with photocharged carbon nitride in dark.

A combination of photochemistry and proton coupled electron transfer (PCET) is a primary strategy employed by biochemical systems and synthetic chemistry to enable uphill reactions under mild conditions. Degenerate nanometer-sized n-type semiconductor nanoparticles (SCNPs) with the Fermi level above the bottom of the conduction band are strongly reducing and act more like metals than semiconductors. Application of the degenerate SCNPs is limited to few examples. Herein, we load microporous potassium poly(heptazine imide) (K-PHI) nanoparticles with electrons (e‒) and charge balancing protons (H+) in an illumination phase using sacrificial agents. e‒/H+ in the K-PHI nanoparticles are weakly bound and therefore could be used in a range of PCET reactions in dark, such as generation of aryl radicals from aryl halides, ketyl radicals from ketones, and 6e‒/6H+ reduction of nitrobenzene to aniline. The integration of several features that until now were intrinsic for plants and natural photosynthesis into a transition metal free nanomaterial composed of abundant elements (C, N, and K) offers a powerful tool for synthetic organic chemistry.

Ligand-Metal Charge Transfer Induced via Adjustment of Textural Properties Controls the Performance of Single-Atom Catalysts during Photocatalytic Degradation.

Because of their peculiar nitrogen-rich structure, carbon nitrides are convenient polydentate ligands for designing single atom-dispersed photocatalysts. However, the relation between catalysts' textural properties and their photophysical-photocatalytic properties is rarely elaborated. Herein, we report the preparation and characterization of a series of single-atom heterogeneous catalysts featuring highly dispersed Ag and Cu species on mesoporous graphitic C3N4. We show that adjustment of materials textural properties and therefore metal single-atom coordination mode enables ligand-to-metal charge transfer (LMCT) or ligand-to-metal-to-ligand charge transfer (LMLCT), properties that were long speculated in single-atom catalysis but never observed. We employ the developed materials in the degradation of organic pollutants under irradiation with visible light. Kinetic investigations under flow conditions show that single atoms of Ag and Cu decrease the number of toxic organic fragmentation products while leading to a higher selectivity toward full degradation. The results correlate with the selected mode of charge transfer in the designed photocatalysts and provide a new understanding of how the local environment of a single-atom catalyst affects the surface structure and reactivity. The concepts can be exploited further to rationally design and optimize other single-atom materials.