Interplay of Static and Dynamic Disorder in the Mixed-Metal Chalcohalide Sn2SbS2I3.

Chalcohalide mixed-anion crystals have seen a rise in interest as "perovskite-inspired materials" with the goal of combining the ambient stability of metal chalcogenides with the exceptional optoelectronic performance of metal halides. Sn2SbS2I3 is a promising candidate, having achieved a photovoltaic power conversion efficiency above 4%. However, there is uncertainty over the crystal structure and physical properties of this crystal family. Using a first-principles cluster expansion approach, we predict a disordered room-temperature structure, comprising both static and dynamic cation disorder on different crystallographic sites. These predictions are confirmed using single-crystal X-ray diffraction. Disorder leads to a lowering of the bandgap from 1.8 eV at low temperature to 1.5 eV at the experimental annealing temperature of 573 K. Cation disorder tailoring the bandgap allows for targeted application or for the use in a graded solar cell, which when combined with material properties associated with defect and disorder tolerance, encourages further investigation into the group IV/V chalcohalide family for optoelectronic applications.

Synergistic Role of Water and Oxygen Leads to Degradation in Formamidinium-Based Halide Perovskites.

Mixed-cation metal halide perovskites have shown remarkable progress in photovoltaic applications with high power conversion efficiencies. However, to achieve large-scale deployment of this technology, efficiencies must be complemented by long-term durability. The latter is limited by external factors, such as exposure to humidity and air, which lead to the rapid degradation of the perovskite materials and devices. In this work, we study the mechanisms causing Cs and formamidinium (FA)-based halide perovskite phase transformations and stabilization during moisture and air exposure. We use in situ X-ray scattering, X-ray photoelectron spectroscopy, and first-principles calculations to study these chemical interactions and their effects on structure. We unravel a surface reaction pathway involving the dissolution of FAI by water and iodide oxidation by oxygen, driving the Cs/FA ratio into thermodynamically unstable regions, leading to undesirable phase transformations. This work demonstrates the interplay of bulk phase transformations with surface chemical reactions, providing a detailed understanding of the degradation mechanism and strategies for designing durable and efficient perovskite materials.

Atomic scale structure and bond stretching force constants in stoichiometric and off-stoichiometric kesterites.

The deviation from stoichiometry and the understanding of its consequences are key factors for the application of kesterites as solar cell absorbers. Therefore, this study investigates the local atomic structure of off-stoichiometric Cu2ZnSnS4 (CZTS), Cu2ZnSnSe4 (CZTSe) and Cu2ZnGeSe4 (CZGSe) by means of Extended X-ray Absorption Fine Structure Spectroscopy. Temperature dependent measurements yield the bond stretching force constants of all cation-anion bonds in stoichiometric CZTS and CZTSe and nearly stoichiometric CZGSe. Low temperature measurements allow high precision analysis of the influence of off-stoichiometry on the element specific average bond lengths and their variances. The overall comparison between the materials is in excellent agreement with measures like ionic/atomic radii and bond ionicities. Furthermore, the small uncertainties allow the identification of systematic trends in the Cu-Se and Zn-Se bond lengths of CZTSe and CZGSe. These trends are discussed in context of the types and concentrations of certain point defects, which gives insight into the possible local configurations and their influence on the average structural parameters. The findings complement the understanding of the effect of off-stoichiometry on the local structure of kesterites, which affects their electronic properties and thus their application for solar cells.

Zinc germanium nitrides and oxide nitrides: the influence of oxygen on electronic and structural properties.

Zinc containing ternary nitrides, in particular ZnSnN2 and ZnGeN2, have great potential as earth-abundant and low toxicity light-absorbing materials. The incorporation of oxygen in this system - may it be intentional or unintentional - affects the crystal structure of the materials as well as their optical band gaps. Herein, we explore the origins of structural changes between the wurtzite type and its hettotype, the ß-NaFeO2 type, and highlight the effect of oxygen. Furthermore, we study the electronic structure and bonding in order to understand the reason for the narrower band gap of zinc germanium oxide nitrides as opposed to pure zinc germanium nitride.

The kesterite-stannite structural transition as a way to avoid Cu/Zn disorder in kesterites: the exemplary case of the Cu2(Zn,Mn)SnSe4.

The solid solution series between Cu2ZnSnSe4, crystallizing in the kesterite type structure, and Cu2MnSnSe4, adopting the stannite type structure, i.e. Cu2(Zn1-xMnx)SnSe4, was studied by a combination of neutron and X-ray powder diffraction. Powder samples with 0 ≤ x ≤ 1 were synthesized by the solid state reaction of the pure elements and it was confirmed by wavelength-dispersive X-ray spectroscopy that each contained a homogeneous, off-stoichiometric quaternary phase. The lattice parameters and cation site occupancy factors were determined simultaneously by the Rietveld analysis of the neutron and X-ray powder diffraction data. The refined site occupancy factors were used to determine the average neutron scattering length of the cation sites in the crystal structure of the Cu2(Zn1-xMnx)SnSe4 mixed crystals, from which a cation distribution model was derived. For the end member Cu2ZnSnSe4, the disordered kesterite structure was confirmed and for Cu2MnSnSe4, the stannite structure was confirmed. The cross-over from the kesterite to stannite type structure by Zn2+ ↔ Mn2+ substitution in the Cu2Zn1-xMnxSnSe4 solid solution can be seen as a cation re-distribution process among the positions (0, 0, 0), (0, ½, ») and (0, », ¾), including Cu+, Zn2+ and Mn2+. The Sn4+ cation does not take part in this process and remains on the 2b site. Moreover, the cross-over is also visible in the ratio of the lattice parameters c/(2a), showing a characteristic dependence on the chemical composition. The order parameter Q, the quantitative measure of Cu/BII disorder (BII = Zn and Mn), shows a distinct dependence on the Mn/(Mn + Zn) ratio. In Zn-rich Cu2(Zn1-xMnx)SnSe4 mixed crystals, the order parameter Q ∼ 0.7 and drops to Q ∼ 0 (complete Cu/BII disorder) in the compositional region 0.3 ≥ x ≥ 0.7. In Mn-rich Cu2(Zn1-xMnx)SnSe4 mixed crystals, adopting the stannite type structure, the order parameter reaches almost Q ∼ 1 (order). Thus, it can be concluded that only Mn-rich Cu2(Zn1-xMnx)SnSe4 mixed crystals do not show Cu/BII disorder. A similar trend of the dependence on the chemical composition of both Cu/BII-disorder and the band gap energy Eg in Cu2(Zn1-xMnx)SnSe4 mixed crystals was observed.

Facile Bulk Synthesis of π-Cubic SnS.

The cubic modification of binary tin sulfide (SnS) has gained significant interest as an earth-abundant, low-toxicity solar absorber material with a band gap close to the optimal value for the conversion of sunlight. We herein report a simple synthesis for the metastable material, which will allow more elaborate characterization methods to be used on this material, and present a full powder refinement of the material along with some preliminary results on the optical and thermal stability properties.

Secondary phases and their influence on the composition of the kesterite phase in CZTS and CZTSe thin films.

Secondary phases zinc sulfide/selenide and copper sulfide in Cu2ZnSnS4 (CZTS) and Cu2ZnSnSe4 (CZTSe) thin film samples are investigated by X-ray absorption near edge structure (XANES) analysis at the chalcogen K-edges. Because of the formation of secondary phases the composition of the kesterite phase can deviate significantly from the total sample composition. For a large set of non-stoichiometric samples we find that the cation ratios of the kesterite phase never exceed Zn/Sn = 1 even for Zn-rich CZTS and CZTSe, with all excess Zn being contained in secondary phases. For CZTS the cation ratios are found to be additionally constrained by Cu/Sn ≤ 2, which means that Cu-excess always leads to the formation of CuxS secondary phases. These results give clear bounds on the Cu-rich and Zn-rich sides of the single phase region in polycrystalline CZTS/Se thin films.

Role of S and Se atoms on the microstructural properties of kesterite Cu2ZnSn(S(x)Se(1-x))4 thin film solar cells.

Microstructural properties of Cu2ZnSn(S(x)Se(1-x))4 kesterite solid solutions were investigated using grazing incidence X-ray diffraction for the full interval of anion compositions in order to explore the influence of S and Se atoms on the thin film morphology. Thin films were prepared by sputtering deposition of metallic precursors, which were then submitted to a high temperature sulfo-selenization process. By adjusting process parameters samples from sulfur- to selenium-pure (0 ≤ x ≤ 1) were made. Microstructural analysis shows a strong dependence of domain size and microstrain on composition. Both values increase with higher sulfur content, and depth profile analysis by grazing incidence X-ray diffraction shows selenium-rich films tend to have a more homogeneous depth distribution of domain size. The increasing trend in domain size of S-rich absorbers can be related to lower formation energies of the sulfur binary phases leading to formation of kesterites, while the increase in the microstrain is explained by the substitution of larger Se atoms with smaller S atoms in the host lattice and the presence of secondary phases.

Disorder induced band gap lowering in kesterite type Cu2ZnSnSe4and Ag2ZnSnSe4: a first-principles and special quasirandom structures investigation.

Quaternary chalcogenides, i.e. Cu2ZnSnS4, crystallising in the kesterite crystal structure have already been demonstrated as potential building blocks of thin film solar cells, containing only abundant elements and exhibiting power conversion efficiencies of about 14.9% so far. However, due to the potential presence of several structurally similar polymorphs, the unequivocal identification of their ground state crystal structures required the application of more elaborate neutron diffraction experiments. One particular complication arose from the later identified Cu-Zn disorder, present in virtually all thin film samples. Subsequently, it has been shown experimentally that this unavoidable Cu-Zn disorder leads to a band gap lowering in the respective samples. Additional theoretical investigations, mostly based on Monte-Carlo methods, tried to understand the atomistic origin of this disorder induced band gap lowering. Here, we present theoretical results from first-principles calculations based on density functional theory for the disorder induced band gap lowering in kesterite Cu2ZnSnSe4and Ag2ZnSnSe4, where the Cu-Zn and Ag-Zn disorder is modelled via a supercell approach and special quasirandom structures. Results of subsequent analyses of structural, electronic, and optical properties are discussed with respect to available experimental results, and will provide additional insight and knowledge towards the atomistic origin of the observed disorder induced band gap lowering in kesterite type materials.

Montmorillonite Exfoliation in LLDPE and Factors Affecting Its Orientation: From Monolayer to Multi-Nano-Layer Polymer Films.

The motivations of the present work are to investigate the exfoliation of montmorillonite within a linear low-density polyethylene matrix and to control its orientation during the cast extrusion process. The first part is focused on the exfoliation of the montmorillonite through the melt extrusion process. The accuracy and relevance of each method used to determine the exfoliation state of montmorillonite have been examined, thanks to X-ray diffraction, transmission electronic microscopy, and rheology. All these methods have presented limitations, but the combination of all leads to a better estimation of the exfoliation state. Finally, the orientation of the montmorillonite is quantified systematically by X-ray texture analysis and correlated with process parameters to discern which one is affecting their orientation. The results have demonstrated an enhancement of the "in-plane" orientation of the montmorillonite with the exfoliation, especially at high concentration and when combined with cast extrusion. Finally, in the multi-nano-layer polymer film configuration, the reduction of the individual layers 29 nm thickness leads to some orientation improvements. However, these improvements are almost at the same level as the concentration effect in a monolayer system. This work gives an overview of all the parameters needed to achieve a significant organo-modified montmorillonite "in-plane" orientation.

Solvent and A-Site Cation Control Preferred Crystallographic Orientation in Bromine-Based Perovskite Thin Films.

Preferred crystallographic orientation in polycrystalline films is desirable for efficient charge carrier transport in metal halide perovskites and semiconductors. However, the mechanisms that determine the preferred orientation of halide perovskites are still not well understood. In this work, we investigate crystallographic orientation in lead bromide perovskites. We show that the solvent of the precursor solution and organic A-site cation strongly affect the preferred orientation of the deposited perovskite thin films. Specifically, we show that the solvent, dimethylsulfoxide, influences the early stages of crystallization and induces preferred orientation in the deposited films by preventing colloidal particle interactions. Additionally, the methylammonium A-site cation induces a higher degree of preferred orientation than the formamidinium counterpart. We use density functional theory to show that the lower surface energy of the (100) plane facets in methylammonium-based perovskites, compared to the (110) planes, is the reason for the higher degree of preferred orientation. In contrast, the surface energy of the (100) and (110) facets is similar for formamidinium-based perovskites, leading to lower degree of preferred orientation. Furthermore, we show that different A-site cations do not significantly affect ion diffusion in bromine-based perovskite solar cells but impact ion density and accumulation, leading to increased hysteresis. Our work highlights the interplay between the solvent and organic A-site cation which determine crystallographic orientation and plays a critical role in the electronic properties and ionic migration of solar cells.

Two-Channel Indirect-Gap Photoluminescence and Competition between the Conduction Band Valleys in Few-Layer MoS2.

MoS2 is a two-dimensional layered transition metal dichalcogenide with unique electronic and optical properties. The fabrication of ultrathin MoS2 is vitally important, since interlayer interactions in its ultrathin varieties will become thickness-dependent, providing thickness-governed tunability and diverse applications of those properties. Unlike with a number of studies that have reported detailed information on direct bandgap emission from MoS2 monolayers, reliable experimental evidence for thickness-induced evolution or transformation of the indirect bandgap remains scarce. Here, the sulfurization of MoO3 thin films with nominal thicknesses of 30 nm, 5 nm and 3 nm was performed. All sulfurized samples were examined at room temperature with spectroscopic ellipsometry and photoluminescence spectroscopy to obtain information about their dielectric function and edge emission spectra. This investigation unveiled an indirect-to-indirect crossover between the transitions, associated with two different Λ and K valleys of the MoS2 conduction band, by thinning its thickness down to a few layers.

Symmetry relations in wurtzite nitrides and oxide nitrides and the curious case of Pmc21.

Binary III-V nitrides such as AlN, GaN and InN in the wurtzite-type structure have long been considered as potent semiconducting materials because of their optoelectronic properties, amongst others. With rising concerns over the utilization of scarce elements, a replacement of the trivalent cations by others in ternary and multinary nitrides has led to the development of different variants of nitrides and oxide nitrides crystallizing in lower-symmetry variants of wurtzite. This work presents the symmetry relationships between these structural types specific to nitrides and oxide nitrides and updates some prior work on this matter. The non-existence of compounds crystallizing in Pmc21, formally the highest subgroup of the wurtzite type fulfilling Pauling's rules for 1:1:2 stoichiometries, has been puzzling scientists for a while; a rationalization is given, from a crystallographic basis, of why this space group is unlikely to be adopted.

Hybrid Perovskite at Full Tilt: Structure and Symmetry Relations of the Incommensurately Modulated Phase of Methylammonium Lead Bromide, MAPbBr3.

As energy-conversion materials, organic-inorganic hybrid perovskites remain a research- and finance-intensive topic. However, even for the arguably most iconic representatives, methylammonium and formamidinium lead halides, the crystal structures of several polymorphs have remained undetermined. Herein, we describe the incommensurately modulated structure of MAPbBr3 in (3+1)D superspace, as deduced from single-crystal X-ray diffractometry despite systematic twinning. Affirming the published average space group, we determined the superspace group Imma(00γ)s00 with cell parameters of a = 8.4657(9), b = 11.7303(12), c = 8.2388(8) Å, and q = 0.2022(8)c*. Via group-subgroup and mode analyses using irreducible representations, we establish symmetry relationships to the well-known cubic and orthorhombic polymorphs and break down distortions into the average tilt system a-b0a- and modulated contributions to tilt and deformation of the PbBr6 coordination polyhedra. Not only does our model fill a long-standing gap in structural knowledge, but it may also serve as a starting point for elucidating other modulated structures within this substance class.

Elucidation of the reaction mechanism for the synthesis of ZnGeN2 through Zn2GeO4 ammonolysis.

Ternary II-IV-N2 materials have been considered as a promising class of materials that combine photovoltaic performance with earth-abundance and low toxicity. When switching from binary III-V materials to ternary II-IV-N2 materials, further structural complexity is added to the system that may influence its optoelectronic properties. Herein, we present a systematic study of the reaction of Zn2GeO4 with NH3 that produces zinc germanium oxide nitrides, and ultimately approach stoichiometric ZnGeN2, using a combination of chemical analyses, X-ray powder diffraction and DFT calculations. Elucidating the reaction mechanism as being dominated by Zn and O extrusion at the later reaction stages, we give an insight into studying structure-property relationships in this emerging class of materials.

BaZrS3 Chalcogenide Perovskite Thin Films by H2S Sulfurization of Oxide Precursors.

The earth-abundant ternary compound BaZrS3, which crystallizes in the perovskite-type structure, has come into view as a promising candidate for photovoltaic applications. We present the synthesis and characterization of polycrystalline perovskite-type BaZrS3 thin films. BaZrO3 precursor layers were deposited by pulsed laser deposition and sulfurized at various temperatures in an argon-diluted H2S atmosphere. We observe increasing incorporation of sulfur for higher annealing temperatures, accompanied by a red shift of the absorption edge, with a bandgap of Eg = 1.99 eV and a large absorption strength >105 cm-1 obtained for sulfurization temperatures of 1000 °C. X-ray diffraction analysis and SEM indicate enhanced crystallization at the higher annealing temperatures, but no evidence for a crystalline solid solution between the BaZrO3 and BaZrS3 phases is found. The charge carrier sum mobility estimated from optical-pump-terahertz-probe spectroscopy indicates increasing mobilities with increasing sulfurization temperature, reaching maximum values of up to ∼2 cm2 V-1 s-1.

Twinning in MAPbI3 at room temperature uncovered through Laue neutron diffraction.

The crystal structure of MAPbI3, the signature compound of the hybrid halide perovskites, at room temperature has been a reason for debate and confusion in the past. Part of this confusion may be due to twinning as the material bears a phase transition just above room temperature, which follows a direct group-subgroup relationship and is prone to twinning. Using neutron Laue diffraction, we illustrate the nature of twinning in the room temperature structure of MAPbI3 and explain its origins from a group-theoretical point-of-view.