Design of an Anti-HMGB1 Synthetic Antibody for In Vivo Ischemic/Reperfusion Injury Therapy.

High-mobility group box 1 (HMGB1) is a multifunctional protein. Upon injury or infection, HMGB1 is passively released from necrotic and activated dendritic cells and macrophages, where it functions as a cytokine, acting as a ligand for RAGE, a major receptor of innate immunity stimulating inflammation responses including the pathogenesis of cerebral ischemia/reperfusion (I/R) injury. Blocking the HMGB1/RAGE axis offers a therapeutic approach to treating these inflammatory conditions. Here, we describe a synthetic antibody (SA), a copolymer nanoparticle (NP) that binds HMGB1. A lightly cross-linked N-isopropylacrylamide (NIPAm) hydrogel copolymer with nanomolar affinity for HMGB1 was selected from a small library containing trisulfated 3,4,6S-GlcNAc and hydrophobic N-tert-butylacrylamide (TBAm) monomers. Competition binding experiments with heparin established that the dominant interaction between SA and HMGB1 occurs at the heparin-binding domain. In vitro studies established that anti-HMGB1-SA inhibits HMGB1-dependent ICAM-1 expression and ERK phosphorylation of HUVECs, confirming that SA binding to HMGB1 inhibits the proteins' interaction with the RAGE receptor. Using temporary middle cerebral artery occlusion (t-MCAO) model rats, anti-HMGB1-SA was found to accumulate in the ischemic brain by crossing the blood-brain barrier. Significantly, administration of anti-HMGB1-SA to t-MCAO rats dramatically reduced brain damage caused by cerebral ischemia/reperfusion. These results establish that a statistical copolymer, selected from a small library of candidates synthesized using an "informed" selection of functional monomers, can yield a functional synthetic antibody. The knowledge gained from these experiments can facilitate the discovery, design, and development of a new category of drug.

Responsive hydrogel-based three-dimensional photonic crystal sensor for lactic acid detection.

The determination of lactic acid content has a guiding significance for disease diagnosis or food supervision. Herein, a hydrogel-based three-dimensional photonic crystal (PC) sensor for specific detection of lactic acid is introduced. The hydrogel was prepared by one-step copolymerization of N-isopropylacrylamide and acrylamide in the presence of oxamate derivative 2-((6-acrylamidohexyl) amino)-2-oxoacetic acid (AOA). An obvious color change from orange-red to purple and a 45-nm redshift of the reflection peak were obtained in 3 min when lactic acid concentration increased from 0 to 20 mM. The detection limit was confirmed as 0.1 mM, and the prepared sensor can be reused more than 20 times. Moreover, the affinity and selectivity of AOA to lactic acid were proven by both the interaction energy from density functional theory (DFT) study and the comparison to those of pyruvate and propionic acid. This sensor was proven to be cost-effective and convenient with rapid response time, good reusability, and selectivity.

A Biomimetic of Endogenous Tissue Inhibitors of Metalloproteinases: Inhibition Mechanism and Contribution of Composition, Polymer Size, and Shape to the Inhibitory Effect.

A biomimetic of endogenous tissue inhibitors of metalloproteinases (TIMPs) was engineered by introducing three binding elements to a synthetic tetrapolymer. We evaluated the contribution of composition, size, and shape of the TIMP-mimicking polymers to the inhibition of BaP1, a P-I class snake venom metalloproteinase (SVMP). Inhibition was achieved when the size of the linear polymer (LP) was comparable to or greater than that of the enzyme, indicating the efficacy requires binding to a significant portion of the enzyme surface in the vicinity of the active site. The efficacy of a low cross-linked polymer hydrogel nanoparticle (NP) of substantially greater molecular weight was comparable to that of the LPs despite differences in size and shape, an important finding for in vivo applications. The abiotic TIMP was effective against two classes of SVMPs in whole snake venom. The results can serve as a design principle for biomimetic polymer inhibitors of enzymes.

Abiotic Stimuli-Responsive Protein Affinity Reagent for IgG.

We describe an approach for the discovery of protein affinity reagents (PARs). Abiotic synthetic hydrogel copolymers can be "tuned" for selective protein capture by the type and ratios of functional monomers included in their polymerization and by the polymerization conditions (i.e., pH). By screening libraries of hydrogel nanoparticles (NPs) containing charged and hydrophobic groups against a protein target (IgG), a stimuli-responsive PAR is selected. The robust carbon backbone synthetic copolymer is rapidly synthesized in the chemistry laboratory from readily available monomers. The production of the PAR does not require living cells and is free from biological contamination. The capture and release of the protein by the copolymer NP is reversible. IgG is sequestered from human serum at pH 6.5 and following a wash step, the purified protein is released by elevating the pH to 7.3. The binding and release of the protein occur without denaturation. The abiotic material functions as a selective PAR for the F(ab')2 domain of IgG for pull-down and immunoprecipitation experiments and for isolation and purification of proteins from complex biological mixtures.

Metal-Free Polymer-Based Affinity Medium for Selective Purification of His6-Tagged Proteins.

We report a metal free synthetic hydrogel copolymer with affinity and selectivity for His6-tagged peptides and proteins. Small libraries of copolymers incorporating charged and hydrophobic functional groups were screened by an iterative process for His6 peptide affinity. The monomer selection was guided by interactions found in the crystal structure of an anti-His tag antibody-His6 peptide antigen complex. Synthetic copolymers incorporating a phenylalanine-derived monomer were found to exhibit strong affinity for both His6-containing peptides and proteins. The proximity of both aromatic and negatively charged functional groups were important factors for the His6 affinity of hydrogel copolymers. His6 affinity was not compromised by the presence of enzyme cleavage sequences. The His6-copolymer interactions are pH sensitive: the copolymer selectively captured His6 peptides at pH 7.8 while the interactions were substantially weakened at pH 8.6. This provided mild conditions for releasing His6-tagged proteins from the copolymer. Finally, a synthetic copolymer coated chromatographic medium was prepared and applied to the purification of a His6-tagged protein from an E. coli expression system. The results establish that a synthetic copolymer-based affinity medium can function as an effective alternative to immobilized metal ion columns for the purification of His6-tagged proteins.

Abiotic Mimic of Endogenous Tissue Inhibitors of Metalloproteinases: Engineering Synthetic Polymer Nanoparticles for Use as a Broad-Spectrum Metalloproteinase Inhibitor.

We describe a process for engineering a synthetic polymer nanoparticle (NP) that functions as an effective, broad-spectrum metalloproteinase inhibitor. Inhibition is achieved by incorporating three functional elements in the NP: a group that interacts with the catalytic zinc ion, functionality that enhances affinity to the substrate-binding pocket, and fine-tuning of the chemical composition of the polymer to strengthen NP affinity for the enzyme surface. The approach is validated by synthesis of a NP that sequesters and inhibits the proteolytic activity of snake venom metalloproteinases from five clinically relevant species of snakes. The mechanism of action of the NP mimics that of endogenous tissue inhibitors of metalloproteinases. The strategy provides a general design principle for synthesizing abiotic polymer inhibitors of enzymes.

Metabolite Responsive Nanoparticle-Protein Complex.

Stimuli-responsive polymers are an efficient means of targeted therapy. Compared to conventional agents, they increase bioavailability and efficacy. In particular, polymer hydrogel nanoparticles (NPs) can be designed to respond when exposed to a specific environmental stimulus such as pH or temperature. However, targeting a specific metabolite as the trigger for stimuli response could further elevate selectivity and create a new class of bioresponsive materials. In this work we describe an N-isopropylacrylamide (NIPAm) NP that responds to a specific metabolite, characteristic of a hypoxic environment found in cancerous tumors. NIPAm NPs were synthesized by copolymerization with an oxamate derivative, a known inhibitor of lactate dehydrogenase (LDH). The oxamate-functionalized NPs (OxNP) efficiently sequestered LDH to produce an OxNP-protein complex. When exposed to elevated concentrations of lactic acid, a substrate of LDH and a metabolite characteristic of hypoxic tumor microenvironments, OxNP-LDH complexes swelled (65%). The OxNP-LDH complexes were not responsive to structurally related small molecules. This work demonstrates a proof of concept for tuning NP responsiveness by conjugation with a key protein to target a specific metabolite of disease.

Engineering the Binding Kinetics of Synthetic Polymer Nanoparticles for siRNA Delivery.

The affinity of a synthetic polymer nanoparticle (NP) to a target biomacromolecule is determined by the association and dissociation rate constants (kon, koff) of the interaction. The individual rates and their sensitivity to local environmental influences are important factors for the on-demand capture and release a target biomacromolecule. Positively charged NPs for small interfering RNA (siRNA) delivery is a case in point. The knockdown efficacy of siRNA can be strongly influenced by the binding kinetics to the NP. Here, we show that kon and koff of siRNA to NPs can be individually engineered by tuning the chemical structure and composition of the NP. N-Isopropylacrylamide-based NPs functionalized with hydrophobic and amine monomers were used. koff decreased by increasing the amount of amine groups in the NP, whereas kon did not change. Importantly, NPs showing a low koff at pH 5.5 together with a high koff at pH 7.4 showed high knockdown efficiency when NP/siRNA complexes were packaged in lipid nanoparticles. These results provide direct evidence for the premise that the efficacy of an siRNA delivery vector is linked with the strong affinity to the siRNA in the endosome and low affinity in the cytoplasm.

Synthetic Polymer Affinity Ligand for Bacillus thuringiensis ( Bt) Cry1Ab/Ac Protein: The Use of Biomimicry Based on the Bt Protein-Insect Receptor Binding Mechanism.

We report a novel strategy for creating abiotic Bacillus thuringiensis ( Bt) protein affinity ligands by biomimicry of the recognition process that takes place between Bt Cry1Ab/Ac proteins and insect receptor cadherin-like Bt-R1 proteins. Guided by this strategy, a library of synthetic polymer nanoparticles (NPs) was prepared and screened for binding to three epitopes 280FRGSAQGIEGS290, 368RRPFNIGINNQQ379 and 436FRSGFSNSSVSIIR449 located in loop α8, loop 2 and loop 3 of domain II of Bt Cry1Ab/Ac proteins. A negatively charged and hydrophilic nanoparticle (NP12) was found to have high affinity to one of the epitopes, 368RRPFNIGINNQQ379. This same NP also had specific binding ability to both Bt Cry1Ab and Bt Cry1Ac, proteins that share the same epitope, but very low affinity to Bt Cry2A, Bt Cry1C and Bt Cry1F closely related proteins that lack epitope homology. To locate possible NP- Bt Cry1Ab/Ac interaction sites, NP12 was used as a competitive inhibitor to block the binding of 865NITIHITDTNNK876, a specific recognition site in insect receptor Bt-R1, to 368RRPFNIGINNQQ379. The inhibition by NP12 reached as high as 84%, indicating that NP12 binds to Bt Cry1Ab/Ac proteins mainly via 368RRPFNIGINNQQ379. This epitope region was then utilized as a "target" or "bait" for the separation and concentration of Bt Cry1Ac protein from the extract of transgenic Bt cotton leaves by NP12. This strategy, based on the antigen-receptor recognition mechanism, can be extended to other biotoxins and pathogen proteins when designing biomimic alternatives to natural protein affinity ligands.

Tuning the Protein Corona of Hydrogel Nanoparticles: The Synthesis of Abiotic Protein and Peptide Affinity Reagents.

Nanomaterials, when introduced into a complex, protein-rich environment, rapidly acquire a protein corona. The type and amount of proteins that constitute the corona depend significantly on the synthetic identity of the nanomaterial. For example, hydrogel nanoparticles (NPs) such as poly(N-isopropylacrylamide) (NIPAm) have little affinity for plasma proteins; in contrast, carboxylated poly(styrene) NPs acquire a dense protein corona. This range of protein adsorption suggests that the protein corona might be "tuned" by controlling the chemical composition of the NP. In this Account, we demonstrate that small libraries of synthetic polymer NPs incorporating a diverse pool of functional monomers can be screened for candidates with high affinity and selectivity to targeted biomacromolecules. Through directed synthetic evolution of NP compositions, one can tailor the protein corona to create synthetic organic hydrogel polymer NPs with high affinity and specificity to peptide toxins, enzymes, and other functional proteins, as well as to specific domains of large proteins. In addition, many NIPAm NPs undergo a change in morphology as a function of temperature. This transformation often correlates with a significant change in NP-biomacromolecule affinity, resulting in a temperature-dependent protein corona. This temperature dependence has been used to develop NP hydrogels with autonomous affinity switching for the protection of proteins from thermal stress and as a method of biomacromolecule purification through a selective thermally induced catch and release. In addition to temperature, changes in pH or buffer can also alter a NP protein corona composition, a property that has been exploited for protein purification. Finally, synthetic polymer nanoparticles with low nanomolar affinity for a peptide toxin were shown to capture and neutralize the toxin in the bloodstream of living mice. While the development of synthetic polymer alternatives to protein affinity reagents is in its early stages, these recent successes using only small libraries of functional monomers are most encouraging. It is likely that by expanding the chemical diversity of functional hydrogels and other polymers, a much broader range of NP-biomacromolecule affinity pairs will result. Since these robust, nontoxic polymers are readily synthesized in the chemistry laboratory, we believe the results presented in this Account offer a promising future for the development of low cost alternatives to more traditional protein affinity reagents such as antibodies.

Self-assembly of the polymer brush-grafted silica colloidal array for recognition of proteins.

Three-dimensional photonic crystal sensors are attractive platforms for autonomous chemical sensing and colorimetric bioassays. At present, the photonic crystal sensors with inverse opal structure were extensively studied, which swells or shrinks in response to the analytes. However, the fabrication of inverse opal sensors still remains a major challenge. Herein, we propose a simple and versatile approach to fabricate 3D opal photonic sensors. This photonic crystal is fabricated via assembly of monodispersed silica particles grafted with linear polymeric ligands (SiO2@LPs). Acrylic acid (negatively charged monomer) and N-tert-butylacrylamide (hydrophobic monomer) were incorporated with N-isopropylacrylamide to achieve strong affinity between the designed polymer ligands and proteins. The proposed photonic crystal displays a maximum redshift of 23 nm in response to 2 mg/mL lysozyme, accompanied by the structure color change from blue to green. Compared to the cross-linked polymers, the linear polymer with flexible structure allows the colloidal array to recognize lysozyme with higher sensitivity (as low as 5 µg/mL) and broader linearity (from 5 to 2000 µg/mL in aqueous media). In the future, this photonic crystal sensor can be used as universal tools for the detection of a broad range of analytes. Graphical abstract Colloidal array self-assembled by polymer brush-grafted silica for proteins detection.

Engineering the Protein Corona of a Synthetic Polymer Nanoparticle for Broad-Spectrum Sequestration and Neutralization of Venomous Biomacromolecules.

Biochemical diversity of venom extracts often occurs within a small number of shared protein families. Developing a sequestrant capable of broad-spectrum neutralization across various protein isoforms within these protein families is a necessary step in creating broad-spectrum antivenom. Using directed synthetic evolution to optimize a nanoparticle (NP) formulation capable of sequestering and neutralizing venomous phospholipase A2 (PLA2), we demonstrate that broad-spectrum neutralization and sequestration of venomous biomacromolecules is possible via a single optimized NP formulation. Furthermore, this optimized NP showed selectivity for venomous PLA2 over abundant serum proteins, was not cytotoxic, and showed substantially long dissociation rates from PLA2. These findings suggest that it may show efficacy as an in vivo venom sequestrant and may serve as a generalized lipid-mediated toxin sequestrant.

Design of Synthetic Polymer Nanoparticles That Facilitate Resolubilization and Refolding of Aggregated Positively Charged Lysozyme.

Designed polymer hydrogel nanoparticles (NPs) capable of facilitating resolubilization and refolding of an aggregated protein, positively charged lysozyme, are prepared. NPs designed to interact strongly with denatured lysozyme and relatively weakly with native lysozyme, facilitated resolubilization and refolding of aggregated lysozyme. Such NPs could be prepared by copolymerizing optimized combinations and populations of functional monomers. The refolded lysozyme showed native conformation and enzymatic activity. Eleven grams of aggregated protein was refolded by 1 g of NPs. However, NPs having low affinity to denatured lysozyme and NPs having high affinity to both denatured and native lysozyme showed relatively low facilitation activity. Our results suggest a potential strategy for the design of artificial chaperones with high facilitating activity.

Biomimetic Design of Mussel-Derived Bioactive Peptides for Dual-Functionalization of Titanium-Based Biomaterials.

Specific cell adhesion and osteogenicity are both crucial factors for the long-term success of titanium implants. In this work, two mussel-derived bioactive peptides were designed to one-step dual-biofunctionalization of titanium implants via robust catechol/TiO2 coordinative interactions. The highly biomimetic peptides capped with integrin-targeted sequence or osteogenic growth sequence could efficiently improve the biocompatibilities of titanium implants and endow the implants with abilities to induce specific cell adhesion and enhanced osteogenicity. More importantly, rationally combined use of the two biomimetic peptides indicated an enhanced synergism on osteogenicity, osseointegration and finally the mechanical stability of Ti implants in vivo. Therefore, the highly biomimetic mussel-derived peptides and the dual-functional strategy in this study would provide a facile, safe, and effective means for improving clinical outcome of titanium-based medical implants.

Tuning Hydrophobicity in Abiotic Affinity Reagents: Polymer Hydrogel Affinity Reagents for Molecules with Lipid-like Domains.

Hydrophobic interactions often dominate the associative forces between biomacromolecules. A synthetic affinity reagent must be able to exploit and optimize these interactions. We describe synthesis of abiotic affinity reagents that sequester biomacromolecules with lipid-like domains. NIPAm-based copolymer nanoparticles (NPs) containing C4-C8 hydrophobic groups were evaluated for their affinity for lipopolysaccharides (LPS), the lipophilic component of the outer membrane of Gram-negative bacteria. Optimal affinity was found for NPs incorporating a linear C4 hydrocarbon group. 1D and 2D (1)H NMR studies revealed that in water, the longer chain (C6 and C8) alkyl groups in the hydrogel NPs were engaged in intrachain association, rendering them less available to interact with LPS. Optimal LPS-NP interaction requires maximizing hydrophobicity, while avoiding side chain aggregation. Polymer compositions with high LPS binding were grafted onto agarose beads and evaluated for LPS clearance from solution; samples containing linear C4 groups also showed the highest LPS clearance capacity.

Measuring melittin uptake into hydrogel nanoparticles with near-infrared single nanoparticle surface plasmon resonance microscopy.

This paper describes how changes in the refractive index of single hydrogel nanoparticles (HNPs) detected with near-infrared surface plasmon resonance microscopy (SPRM) can be used to monitor the uptake of therapeutic compounds for potential drug delivery applications. As a first example, SPRM is used to measure the specific uptake of the bioactive peptide melittin into N-isopropylacrylamide (NIPAm)-based HNPs. Point diffraction patterns in sequential real-time SPRM differential reflectivity images are counted to create digital adsorption binding curves of single 220 nm HNPs from picomolar nanoparticle solutions onto hydrophobic alkanethiol-modified gold surfaces. For each digital adsorption binding curve, the average single nanoparticle SPRM reflectivity response, ⟨Δ%RNP⟩, was measured. The value of ⟨Δ%RNP⟩ increased linearly from 1.04 ± 0.04 to 2.10 ± 0.10% when the melittin concentration in the HNP solution varied from zero to 2.5 µM. No change in the average HNP size in the presence of melittin is observed with dynamic light scattering measurements, and no increase in ⟨Δ%RNP⟩ is observed in the presence of either FLAG octapeptide or bovine serum albumin. Additional bulk fluorescence measurements of melittin uptake into HNPs are used to estimate that a 1% increase in ⟨Δ%RNP⟩ observed in SPRM corresponds to the incorporation of approximately 65000 molecules into each 220 nm HNP, corresponding to roughly 4% of its volume. The lowest detected amount of melittin loading into the 220 nm HNPs was an increase in ⟨Δ%RNP⟩ of 0.15%, corresponding to the absorption of 10000 molecules.

The rational design of a synthetic polymer nanoparticle that neutralizes a toxic peptide in vivo.

Synthetic polymer nanoparticles (NPs) that bind venomous molecules and neutralize their function in vivo are of significant interest as "plastic antidotes." Recently, procedures to synthesize polymer NPs with affinity for target peptides have been reported. However, the performance of synthetic materials in vivo is a far greater challenge. Particle size, surface charge, and hydrophobicity affect not only the binding affinity and capacity to the target toxin but also the toxicity of NPs and the creation of a "corona" of proteins around NPs that can alter and or suppress the intended performance. Here, we report the design rationale of a plastic antidote for in vivo applications. Optimizing the choice and ratio of functional monomers incorporated in the NP maximized the binding affinity and capacity toward a target peptide. Biocompatibility tests of the NPs in vitro and in vivo revealed the importance of tuning surface charge and hydrophobicity to minimize NP toxicity and prevent aggregation induced by nonspecific interactions with plasma proteins. The toxin neutralization capacity of NPs in vivo showed a strong correlation with binding affinity and capacity in vitro. Furthermore, in vivo imaging experiments established the NPs accelerate clearance of the toxic peptide and eventually accumulate in macrophages in the liver. These results provide a platform to design plastic antidotes and reveal the potential and possible limitations of using synthetic polymer nanoparticles as plastic antidotes.

Chiral polymers of intrinsic microporosity: selective membrane permeation of enantiomers.

Following its resolution by diastereomeric complexation, 5,5',6,6'-tetrahydroxy-3,3,3',3'-tetramethyl-1,1'-spirobisindane (TTSBI) was used to synthesize a chiral ladder polymer, (+)-PIM-CN. (+)-PIM-COOH was also synthesized by the acid hydrolysis of (+)-PIM-CN. Following characterization, both (+)-PIM-CN and (+)-PIM-COOH were solvent cast directly into semipermeable membranes and evaluated for their ability to enable the selective permeation of a range of racemates, including mandelic acid (Man), Fmoc-phenylalanine, 1,1'-bi-2-naphthol (binol), and TTSBI. High ee values were observed for a number of analytes, and both materials exhibited high permeation rates. A selective diffusion-permeation mechanism was consistent with the results obtained with these materials. Their high permeability, processability, and ease of chemical modification offer considerable potential for liquid-phase membrane separations and related separation applications.

Dynamic introduction of cell adhesive factor via reversible multicovalent phenylboronic acid/cis-diol polymeric complexes.

In this work, dynamic introduction of bioactive RGD peptide on a matrix was successfully demonstrated via reversible multicovalent interactions within PBA/cis-diol polymeric complexes. These reversible, stable multiple interaction sites, in addition to a long accessible polymeric linker, enabled "reversible" control of cell adhesion by specific biomolecular exchange (e.g., glucose or fructose). This biomolecule-triggered, noninvasive strategy shows great promise for use in real-time biological research and mimics natural biomolecular feedback systems, thus having potential application in medical diagnoses and regenerative medicine.

Epitope discovery for a synthetic polymer nanoparticle: a new strategy for developing a peptide tag.

We describe a novel epitope discovery strategy for creating an affinity agent/peptide tag pair. A synthetic polymer nanoparticle (NP) was used as the "bait" to catch an affinity peptide tag. Biotinylated peptide tag candidates of varied sequence and length were attached to an avidin platform and screened for affinity against the polymer NP. NP affinity for the avidin/peptide tag complexes was used to provide insight into factors that contribute NP/tag binding. The identified epitope sequence with an optimized length (tMel-tag) was fused to two recombinant proteins. The tagged proteins exhibited higher NP affinity than proteins without tags. The results establish that a fusion peptide tag consisting of optimized 15 amino acid residues can provide strong affinity to an abiotic polymer NP. The affinity and selectivity of NP/tMel-tag interactions were exploited for protein purification in conjunction with immobilized metal ion/His6-tag interactions to prepare highly purified recombinant proteins. This strategy makes available inexpensive, abiotic synthetic polymers as affinity agents for peptide tags and provides alternatives for important applications where more costly affinity agents are used.