Effects of force magnitude on dental arches in cervical headgear therapy.

AIM: To study the influence of different force magnitudes on dental arches in cervical headgear (CHG) treatment. MATERIAL AND METHODS: In this controlled clinical trial, patients (n = 40) were treated with CHG with light (L, 300 g, n = 22) or heavy force (H, 500 g, n = 18) magnitude. Subjects were asked to use CHG for 10 hours a day for 10 months. The outer bow of the CHG facebow was raised 10-20 degrees and the inner bow expanded 3-4 mm. Adherence to instructions and force magnitude were monitored with an electronic module (Smartgear, Swissorthodontics, Switzerland). Impressions for study models were taken before (T1) and after (T2) treatment and the study models were scanned into digital form (3Shape, R700 Scanner, Denmark). Measurements were made using the digital models (Planmeca Romexis, Model analyser, Finland). RESULTS: During the treatment (T1-T2) the upper inter-canine distance increased by 2.83 mm (P = 0.000) and 2.60 mm (P = 0.000) in the L and H force magnitude groups, respectively. Upper inter-molar width increased by 3.16 mm (P = 0.000) and 2.50 mm (P = 0.000) in the L and H groups, respectively. Maxillary total arch perimeter increased by 6.39 mm (P = 0.001) and 6.68 mm (P = 0.001) in the L and H groups, respectively. In the amount of change over time, T1-T2, in the upper arch measurements, no significant difference was found between the groups. Lower inter-canine width increased by 0.94 mm (P = 0.005) and 1.16 mm (P = 0.000) in the L and H groups, respectively; no difference between the groups. Lower inter-molar distance increased by 2.17 mm (P = 0.000) and 1.11 mm (P = 0.008) in the L and H groups, respectively. At the end of the study, upper and lower inter-molar width was larger in the L group than in the H group (P = 0.039 and P = 0.022, respectively). CONCLUSION: CHG therapy is an effective method for expanding and releasing moderate crowding of the upper dental arch. The lower arch spontaneously follows the upper arch in widening effects, and minor expansion can also be seen on the lower arch. In the L group, larger inter-molar width was achieved on the upper and lower arch; probably due to better adherence to instructions. Light force is recommended for use in CHG therapy.

The impact of force magnitude on the first and second maxillary molars in cervical headgear therapy.

AIM: To study the effect of force magnitude on the maxillary first and second molars in cervical headgear (CHG) therapy. MATERIAL AND METHODS: In this controlled clinical trial, patients (n = 40) were treated with CHG with a light (L, 300 g, n = 22) or a heavy force (H, 500 g, n = 18) magnitude. The subjects were asked to wear CHG for 10 hours a day for 10 months. The outer bow of the CHG facebow was lifted up for 10-20 degrees and the inner bow was expanded 3-4 mm. Adherence to instructions and force magnitude were monitored using an electronic module (Smartgear, Swissorthodontics, Switzerland). Panoramic and lateral radiographs before (T1) and after treatment (T2) were analysed using a Romexis Cephalometric module (Planmeca, Finland) focussing on the angular, sagittal, and vertical positions of the permanent first and second molars. RESULTS: According to the cephalometric analysis of the maxillary first and second molars, distal tipping occurred during T1-T2 in the H group (P = 0.010 and 0.000, respectively), and the change was greater in the H group compared to the L group (P = 0.045 and 0.019, respectively). Based on the panoramic analysis, tipping occurred in the distal direction during therapy in the H group in the second molars compared to the midline or condylar line (P = 0.001 and 0.001; P = 0.008 and 0.003 on the right and left, respectively). CONCLUSION: With heavy force magnitude, the maxillary first and second molars can tilt more easily in the distal direction even if the CHG was used less. Distal tipping of the molar can be considered to be a side effect of CHG therapy.

Impact of force magnitude on effectiveness in cervical headgear therapy: a cephalometric analysis.

AIM: The main aim of this study was to study the impact of different force magnitudes on effectiveness in cervical headgear (CHG) therapy. MATERIALS AND METHODS: Forty patients were treated with CHG with light (L; 300 g) or heavy (H; 500 g) force in this controlled clinical trial. Patients were asked to wear CHG for 10 hours/day for 10 months. The inner bow of the CHG was expanded (3-4 mm) and the long outer bow bent (10-20 degree) upward in relation to the inner bow. Adherence to instructions and force magnitude in CHG use was monitored by electronic module (Smartgear, Swissorthodontics, Switzerland). Lateral cephalograms were taken before (T1) and after (T2) the treatment and studied with modified Pancherz analysis using a Planmeca Romexis Ceph module (Planmeca, Finland). RESULTS: In both groups, skeletal and dental effects were seen. The only statistically significant difference in cephalometric analysis was the inclination of upper incisors at T1 (P = 0.010) and at T2 (P = 0.011). In both groups, a reduction in Sella-Nasion- point A (SNA) angle was found: L group T1 82.7degree (SD ± 3.6degree), T2 82.0degree (SD ± 3.5 degree) and H group T1 82.6 degree (SD ± 4.7 degree), T2 81.5 degree (SD ± 4.5 degree), but no statistically significant difference between the groups. Children in the L group used CHG statistically significantly more than those in the H group (10.0 ± 1.5 hour, and 8.3 ± 2.1 hour, respectively, P = 0.002). CONCLUSION: Children with lower force CHG seem to adhere better to instructions for CHG use. After 10 months of use, no statistically significant differences were found in dental or skeletal outcome. However, in the H group, the outcome was achieved with less daily hours of use.

Pharyngeal airway dimensions: a cephalometric, growth-study-based analysis of physiological variations in children aged 6-17.

OBJECTIVE: The aim was to assess pharyngeal airway dimensions and physiological changes based on lateral cephalometric radiographs from healthy untreated children aged 6-17 years. MATERIALS/METHODS: The sample consisted of 880 lateral cephalograms (412 females and 468 males) of the Zurich Craniofacial Growth Study. Statistical analyses on cephalometric measurements of airway dimensions (distances 'p': shortest distance between soft palate and posterior pharyngeal wall and 't': shortest distance between tongue and posterior pharyngeal wall) and craniofacial parameters were performed. To disclose differences between different age groups, a Kruskal-Wallis test was applied. The influence of gender on 'p' and 't' was analysed by a Mann-Whitney U-test for each age group separately. The Spearman correlation was computed in order to investigate associations between craniofacial parameters. Variables associated with 'p' and 't' were chosen for multiple regression model investigation. RESULTS: The results demonstrated high interindividual variations. A slight influence of age on 'p' (P = 0.034) could be attested (+1.03 mm) but not on 't' (P = 0.208). With the exception of the 9-year age group, no significant differences between the genders were found. Correlation analysis revealed several statistically significant correlations between 't' or 'p' and antero-posterior cephalometric variables. All correlation coefficients were, however, very low and the adjusted coefficient of determination also revealed the regression model to be very weak. CONCLUSIONS: The high interindividual variations of 'p' and 't' render the use of reference values problematic. Contrary to other craniofacial structures, neither age-related changes nor sexual dimorphism were found for 'p' and 't'. Any associations to antero-posterior cephalometric characteristics seem low.

Radiographic evaluation of different techniques for ridge preservation after tooth extraction: a randomized controlled clinical trial.

OBJECTIVE: To evaluate the radiographic changes of the alveolar ridge following application of different ridge preservation techniques 6 months after tooth extraction. MATERIALS AND METHODS: Four treatment modalities were randomly assigned in 40 patients: ß-tricalcium-phosphate-particles with polylactid coating (ß-TCP), demineralized bovine bone mineral with 10% collagen covered with a collagen matrix (DBBM-C/CM), DBBM-C covered with an autogenous soft-tissue graft (DBBM-C/PG) and spontaneous healing (control). Cone-beam computed tomography scans were performed after treatment and 6 months later. RESULTS: After 6 months, the vertical changes ranged between -0.6 mm (-10.2%) for control and a gain of 0.3 mm (5.6%) for DBBM-C/PG on the lingual side, and between -2.0 mm (-20.9%) for ß-TCP and a gain of 1.2 mm (8.1%) for DBBM-C/PG on the buccal side. The most accentuated ridge width changes were recorded 1 mm below the crest: -3.3 mm (-43.3%, C), -6.1 mm (-77.5%, ß-TCP), -1.2 mm (-17.4%, DBBM-C/CM) and -1.4 mm (-18.1%, DBBM-C/PG). At all three levels, DBBM-C with either CM or PG was not significantly differing (p > 0.05), while most other differences between the groups reached statistical significance (p < 0.05). CONCLUSIONS: Application of DBBM-C, covered with CM or PG, resulted in less vertical and horizontal changes of the alveolar ridge as compared with controls 6 months after extraction.

Evaluating the agreement of skeletal age assessment based on hand-wrist and cervical vertebrae radiography.

INTRODUCTION: The aim of this study was to examine the agreement of skeletal age assessment based on hand-wrist radiographs with cephalogram-based cervical vertebrae evaluation. To circumvent bias and loss of information from staging, a quantitative approach was applied to determine morphologic changes. METHODS: We analyzed 730 sets of radiographs (cephalogram and hand-wrist) of untreated subjects (352 boys, 378 girls; age range, 6-18 years) from a growth study, each sex as a separate sample. Skeletal age was determined on the hand-wrist radiographs according to the method of Greulich and Pyle. Morphometric changes of the vertebral bodies C2 through C4 were measured (concavity, anterior height, and angle) and tested for correlations with the method of Greulich and Pyle. All correlating variables were included in a multiple linear regression to generate a calculated skeletal age. To establish the agreement between the method of Greulich and Pyle and calculated skeletal age, Bland-Altman plots were made, limits of agreement were identified, and cross-tables (before and after peak height velocity) were computed. Similarly, the agreement between the method of Greulich and Pyle and each subject's chronologic age was estimated for comparison. RESULTS: Concavity of C2, C3, and C4; anterior height of C3 and C4; and the angle of C3 correlated with skeletal age highly significantly (P <0.0001) in both sexes, and calculated skeletal age was established based on a linear regression. The agreement between the method of Greulich and Pyle and calculated skeletal age was modest (limits of agreement: boys, ±3.5 years; girls, ±3.3 years) and substantially weaker than the agreement between the method of Greulich and Pyle and chronologic age (limits of agreement: boys, +2.1 to -1.7 years; girls, +2.2 to -1.2 years). Similarly, calculated skeletal age resulted in considerably more false predictions of peak height velocity (boys, 18.9%; girls, 12.9%) than did chronologic age (boys, 7.1%; girls, 7.4%). CONCLUSIONS: Morphometric assessment of age-dependent changes in the cervical spine offers no advantage over chronologic age, in either assessing skeletal age or predicting the pubertal growth spurt.

Is the use of the cervical vertebrae maturation method justified to determine skeletal age? A comparison of radiation dose of two strategies for skeletal age estimation.

The aim of this study was to assess effective doses of a lateral cephalogram radiograph with and without thyroid shield and compare the differences with the radiation dose of a hand-wrist radiograph. Thermoluminescent dosimeters were placed at 19 different sites in the head and neck of a tissue-equivalent human skull (RANDO phantom). Analogue lateral cephalograms with and without thyroid shield (67 kV, 250 mA, 10 mAs) and hand-wrist radiographs (40 kV, 250 mA, 10 mAs) were obtained. The effective doses were calculated using the 2007 International Commission on Radiological Protection recommendations. The effective dose for conventional lateral cephalogram without a thyroid shield was 5.03 microsieverts (µSv). By applying a thyroid shield to the RANDO phantom, a remarkable dose reduction of 1.73 µSv could be achieved. The effective dose of a conventional hand-wrist radiograph was calculated to be 0.16 µSv. Adding the effective dose of the hand-wrist radiograph to the effective dose of the lateral cephalogram with thyroid shield resulted in a cumulative effective dose of 3.46 µSv. Without thyroid shield, the effective dose of a lateral cephalogram was approximately 1.5-fold increased than the cumulative effective dose of a hand-wrist radiograph and a lateral cephalogram with thyroid shield. Thyroid is an organ that is very sensitive to radiation exposure. Its shielding will significantly reduce the effective dose. An additional hand-wrist radiograph, involving no vulnerable tissues, however, causes very little radiation risk. In accordance with the ALARA (As Low As Reasonably Achievable) principle, if an evaluation of skeletal age is indicated, an additional hand-wrist radiograph seems much more justifiable than removing the thyroid shield.

MRI of the temporo-mandibular joint: which sequence is best suited to assess the cortical bone of the mandibular condyle? A cadaveric study using micro-CT as the standard of reference.

OBJECTIVE: To determine the best suited sagittal MRI sequence out of a standard temporo-mandibular joint (TMJ) imaging protocol for the assessment of the cortical bone of the mandibular condyles of cadaveric specimens using micro-CT as the standard of reference. METHODS: Sixteen TMJs in 8 human cadaveric heads (mean age, 81 years) were examined by MRI. Upon all sagittal sequences, two observers measured the cortical bone thickness (CBT) of the anterior, superior and posterior portions of the mandibular condyles (i.e. objective analysis), and assessed for the presence of cortical bone thinning, erosions or surface irregularities as well as subcortical bone cysts and anterior osteophytes (i.e. subjective analysis). Micro-CT of the condyles was performed to serve as the standard of reference for statistical analysis. RESULTS: Inter-observer agreements for objective (r = 0.83-0.99, P < 0.01) and subjective (κ = 0.67-0.88) analyses were very good. Mean CBT measurements were most accurate, and cortical bone thinning, erosions, surface irregularities and subcortical bone cysts were best depicted on the 3D fast spoiled gradient echo recalled sequence (3D FSPGR). CONCLUSION: The most reliable MRI sequence to assess the cortical bone of the mandibular condyles on sagittal imaging planes is the 3D FSPGR sequence. KEY POINTS: MRI may be used to assess the cortical bone of the TMJ. • Depiction of cortical bone is best on 3D FSPGR sequences. • MRI can assess treatment response in patients with TMJ abnormalities.

Regenerative Orthodontics: GBR and Corticotomy to Stretch the Limits of Orthodontic Treatment.

Orthodontic therapy could lead to marginal bone resorption in cases where the teeth are moved outside the envelope of bone. The purpose of this case series was to test corticotomy with a guided bone regeneration (GBR) procedure to regenerate bone in the direction of movement outside the original bony housing. Ten adult patients (60 anterior teeth), all presenting with severe anterior crowding, were enrolled in the study. Orthodontic therapy in all investigated sites was associated with selective surgical corticotomies and a simultaneous GBR procedure. CBCT examinations were performed before starting orthodontic treatment (T0) and at the end of treatment (T1; mean: 7 months; range: 6 to 9 months). Pre- and postoperative CBCTs were superimposed with a DICOM viewer (3D Slicer) and studied with an image-processing software (ImageJ, National Institutes of Health) to measure the area of interest of the buccal plate. The average area was found to be 0.58 ± 0.22 mm2 at T0 and 1.76 ± 0.4 mm2 at T1, with a statistically significant difference (P < .05). The combination of corticotomy and a regenerative procedure seems to have the ability to augment the original osseous anatomy when the root is moved outside of the original bony envelope.

Adherence to instructions and fluctuation of force magnitude in cervical headgear therapy.

OBJECTIVES: To investigate how patients adhere to instructions and how force magnitude fluctuates and influences the use of cervical headgear (CHG) therapy. MATERIALS AND METHODS: In this controlled clinical trial, subjects (n = 40) were treated with CHG with light (L, 300 g) or heavy (H, 500 g) force. Patients were asked to wear CHG for 10 hours per day for 10 months (ie, during sleep), but the importance for treatment of wearing CHG also in the evening hours was emphasized. Adherence to instructions and force magnitude in CHG use were monitored by electronic module (Smartgear, Swissorthodontics, Switzerland). RESULTS: Force magnitude can be set at a certain level, L or H, even if great individual variability is seen in all subjects (0-900 g). Children in the L group used CHG longer per day than those in the H group (9.3 hours ±1.5 hours and 7.8 hours ± 2.1 hours, respectively, P = .002). During evening hours, CHG was used more ( P = .02) in the L group than in the H group. In both groups, CHG was used less in the evening hours during school breaks than in the evening hours during school ( P < .001). CONCLUSIONS: Children with lower force in CHG seem to adhere better to the instructions for CHG use. Daily rhythm also influences the time of appliance use regardless of force magnitude. The force can be set to a certain magnitude level, even though there is substantial individual variability.

Radiation dose of cone-beam computed tomography compared to conventional radiographs in orthodontics.

OBJECTIVES: The aim of this study was to determine radiation doses of different cone-beam computed tomography (CBCT) scan modes in comparison to a conventional set of orthodontic radiographs (COR) by means of phantom dosimetry. MATERIALS AND METHODS: Thermoluminescent dosimeter (TLD) chips (3 × 1 × 1 mm) were used on an adult male tissue-equivalent phantom to record the distribution of the absorbed radiation dose. Three different scanning modes (i.e., portrait, normal landscape, and fast scan landscape) were compared to CORs [i.e., conventional lateral (LC) and posteroanterior (PA) cephalograms and digital panoramic radiograph (OPG)]. RESULTS: The following radiation levels were measured: 131.7, 91, and 77 µSv in the portrait, normal landscape, and fast landscape modes, respectively. The overall effective dose for a COR was 35.81 µSv (PA: 8.90 µSv; OPG: 21.87 µSv; LC: 5.03 µSv). DISCUSSION: Although one CBCT scan may replace all CORs, one set of CORs still entails 2-4 times less radiation than one CBCT. Depending on the scan mode, the radiation dose of a CBCT is about 3-6 times an OPG, 8-14 times a PA, and 15-26 times a lateral LC. Finally, in order to fully reconstruct cephalograms including the cranial base and other important structures, the CBCT portrait mode must be chosen, rendering the difference in radiation exposure even clearer (131.7 vs. 35.81 µSv). Shielding radiation-sensitive organs can reduce the effective dose considerably. CONCLUSION: CBCT should not be recommended for use in all orthodontic patients as a substitute for a conventional set of radiographs. In CBCT, reducing the height of the field of view and shielding the thyroid are advisable methods and must be implemented to lower the exposure dose.

The inclination of mandibular incisors revisited.

OBJECTIVE: To reassess the inclination of lower incisors and evaluate possible associations with gender, age, symphyseal parameters, and skeletal pattern. MATERIALS AND METHODS: Twelve hundred and seventy-two (605 females, 667 males) cephalograms of untreated subjects of a craniofacial growth study (age: 8-16 years) were evaluated. Correlations between the angulation of the lower incisors and age, symphyseal distances (height, width, and depth), symphyseal ratios (height-width, height-depth), and skeletal angles (divergence of the jaws and gonial angle) were investigated for all ages separately and for both sexes independently. RESULTS: The inclination of lower incisors increased over age (8 years: girls = 93.9° [95% CI, 92.3°-95.7°], boys = 93.3° [95% CI, 91.8°-94.9°]; 16 years: girls = 96.1° [95% CI, 94.1°-98.2°], boys = 97.1° [95% CI, 95.6°-98.6°]). Inclination of lower incisors correlated with the divergence of the jaws for all ages significantly or highly significantly, except for boys and girls 9 years of age and girls 11 and 12 years of age, for which only a tendency was observed. Similarly, a strong correlation to gonial angle could be observed. No correlation could be found between the inclination of lower incisors and any symphyseal parameters (absolute measurements and ratios), except for symphyseal depth. CONCLUSION: Lower incisor inclination is linked to the subject's sex, age, and skeletal pattern. It is not associated with symphyseal dimensions, except symphyseal depth. Factors related to natural inclination of lower incisors should be respected when establishing a treatment plan.