Review of high energy x-ray computed tomography for non-destructive dimensional metrology of large metallic advanced manufactured components.

Advanced manufacturing technologies, led by additive manufacturing, have undergone significant growth in recent years. These technologies enable engineers to design parts with reduced weight while maintaining structural and functional integrity. In particular, metal additive manufacturing parts are increasingly used in application areas such as aerospace, where a failure of a mission-critical part can have dire safety consequences. Therefore, the quality of these components is extremely important. A critical aspect of quality control is dimensional evaluation, where measurements provide quantitative results that are traceable to the standard unit of length, the metre. Dimensional measurements allow designers, manufacturers and users to check product conformity against engineering drawings and enable the same quality standard to be used across the supply chain nationally and internationally. However, there is a lack of development of measurement techniques that provide non-destructive dimensional measurements beyond common non-destructive evaluation focused on defect detection. X-ray computed tomography (XCT) technology has great potential to be used as a non-destructive dimensional evaluation technology. However, technology development is behind the demand and growth for advanced manufactured parts. Both the size and the value of advanced manufactured parts have grown significantly in recent years, leading to new requirements of dimensional measurement technologies. This paper is a cross-disciplinary review of state-of-the-art non-destructive dimensional measuring techniques relevant to advanced manufacturing of metallic parts at larger length scales, especially the use of high energy XCT with source energy of greater than 400 kV to address the need in measuring large advanced manufactured parts. Technologies considered as potential high energy x-ray generators include both conventional x-ray tubes, linear accelerators, and alternative technologies such as inverse Compton scattering sources, synchrotron sources and laser-driven plasma sources. Their technology advances and challenges are elaborated on. The paper also outlines the development of XCT for dimensional metrology and future needs.

Information-rich high-throughput cellular assays using acoustic mist ionisation mass spectrometry.

Cellular metabolites and phospholipids contain a vast amount of information about the current state of a cell, and are a useful resource for understanding the effects of drug candidates in vitro. Typical human cell-based assays in early drug discovery rely on simple readouts such as cell viability, or focus on single end-points revealed by an antibody or other label-based technologies. We introduce a generic 384-well plate-based workflow for data-rich cellular assays using facile sample preparation and direct analysis by acoustic mist ionization mass spectrometry (AMI-MS). The assays are compatible with adherent and suspension cells, and provide simultaneous information about a number of cellular small-molecule components (e.g., amino acids, nucleotides, phospholipids), cellular processes (e.g., proliferation, glycolysis, oxidative stress), as well as compound uptake and metabolism. Thanks to the high-throughput and low cost of analysis, the workflow can be introduced very early into any drug discovery pipeline to help select optimal lead molecules.

X-ray Micro-Computed Tomography for Nondestructive Three-Dimensional (3D) X-ray Histology.

Historically, micro-computed tomography (µCT) has been considered unsuitable for histologic analysis of unstained formalin-fixed, paraffin-embedded soft tissue biopsy specimens because of a lack of image contrast between the tissue and the paraffin. However, we recently demonstrated that µCT can successfully resolve microstructural detail in routinely prepared tissue specimens. Herein, we illustrate how µCT imaging of standard formalin-fixed, paraffin-embedded biopsy specimens can be seamlessly integrated into conventional histology workflows, enabling nondestructive three-dimensional (3D) X-ray histology, the use and benefits of which we showcase for the exemplar of human lung biopsy specimens. This technology advancement was achieved through manufacturing a first-of-kind µCT scanner for X-ray histology and developing optimized imaging protocols, which do not require any additional sample preparation. 3D X-ray histology allows for nondestructive 3D imaging of tissue microstructure, resolving structural connectivity and heterogeneity of complex tissue networks, such as the vascular network or the respiratory tract. We also demonstrate that 3D X-ray histology can yield consistent and reproducible image quality, enabling quantitative assessment of a tissue's 3D microstructures, which is inaccessible to conventional two-dimensional histology. Being nondestructive, the technique does not interfere with histology workflows, permitting subsequent tissue characterization by means of conventional light microscopy-based histology, immunohistochemistry, and immunofluorescence. 3D X-ray histology can be readily applied to a plethora of archival materials, yielding unprecedented opportunities in diagnosis and research of disease.

Acoustic Mist Ionization Platform for Direct and Contactless Ultrahigh-Throughput Mass Spectrometry Analysis of Liquid Samples.

Mass spectrometry (MS) has many advantages as a quantitative detection technology for applications within drug discovery. However, current methods of liquid sample introduction to a detector are slow and limit the use of mass spectrometry for kinetic and high-throughput applications. We present the development of an acoustic mist ionization (AMI) interface capable of contactless nanoliter-scale "infusion" of up to three individual samples per second into the mass detector. Installing simple plate handling automation allowed us to reach a throughput of 100 000 samples per day on a single mass spectrometer. We applied AMI-MS to identify inhibitors of a human histone deacetylase from AstraZeneca's collection of 2 million small molecules and measured their half-maximal inhibitory concentration. The speed, sensitivity, simplicity, robustness, and consumption of nanoliter volumes of sample suggest that this technology will have a major impact across many areas of basic and applied research.

High-resolution synchrotron imaging shows that root hairs influence rhizosphere soil structure formation.

In this paper, we provide direct evidence of the importance of root hairs on pore structure development at the root-soil interface during the early stage of crop establishment. This was achieved by use of high-resolution (c. 5 µm) synchrotron radiation computed tomography (SRCT) to visualise both the structure of root hairs and the soil pore structure in plant-soil microcosms. Two contrasting genotypes of barley (Hordeum vulgare), with and without root hairs, were grown for 8 d in microcosms packed with sandy loam soil at 1.2 g cm-3 dry bulk density. Root hairs were visualised within air-filled pore spaces, but not in the fine-textured soil regions. We found that the genotype with root hairs significantly altered the porosity and connectivity of the detectable pore space (> 5 µm) in the rhizosphere, as compared with the no-hair mutants. Both genotypes showed decreasing pore space between 0.8 and 0.1 mm from the root surface. Interestingly the root-hair-bearing genotype had a significantly greater soil pore volume-fraction at the root-soil interface. Effects of pore structure on diffusion and permeability were estimated to be functionally insignificant under saturated conditions when simulated using image-based modelling.

The Application of Contrast Media for In Vivo Feature Enhancement in X-Ray Computed Tomography of Soil-Grown Plant Roots.

The use of in vivo X-ray microcomputed tomography (µCT) to study plant root systems has become routine, but is often hampered by poor contrast between roots, soil, soil water, and soil organic matter. In clinical radiology, imaging of poorly contrasting regions is frequently aided by the use of radio-opaque contrast media. In this study, we present evidence for the utility of iodinated contrast media (ICM) in the study of plant root systems using µCT. Different dilutions of an ionic and nonionic ICM (Gastrografin 370 and Niopam 300) were perfused into the aerial vasculature of juvenile pea plants via a leaf flap (Pisum sativum). The root systems were imaged via µCT, and a variety of image-processing approaches used to quantify and compare the magnitude of the contrast enhancement between different regions. Though the treatment did not appear to significantly aid extraction of full root system architectures from the surrounding soil, it did allow the xylem and phloem units of seminal roots and the vascular morphology within rhizobial nodules to be clearly visualized. The nonionic, low-osmolality contrast agent Niopam appeared to be well tolerated by the plant, whereas Gastrografin showed evidence of toxicity. In summary, the use of iodine-based contrast media allows usually poorly contrasting root structures to be visualized nondestructively using X-ray µCT. In particular, the vascular structures of roots and rhizobial nodules can be clearly visualized in situ.

Multi-dimensional Treatment Foster Care in England: differential effects by level of initial antisocial behaviour.

Multi-dimensional Treatment Foster Care (MTFC), recently renamed Treatment Foster Care Oregon for Adolescents (TFCO-A) is an internationally recognised intervention for troubled young people in public care. This paper seeks to explain conflicting results with MTFC by testing the hypotheses that it benefits antisocial young people more than others and does so through its effects on their behaviour. Hard-to-manage young people in English foster or residential homes were assessed at entry to a randomised and case-controlled trial of MTFC (n = 88) and usual care (TAU) (n = 83). Primary outcome was the Children's Global Assessment Scale (CGAS) at 12 months analysed according to high (n = 112) or low (n = 59) baseline level of antisocial behaviour on the Health of the Nation Outcome Scales for Children and Adolescents. After adjusting for covariates, there was no overall treatment effect on CGAS. However, the High Antisocial Group receiving MTFC gained more on the CGAS than the Low group (mean improvement 9.36 points vs. 5.33 points). This difference remained significant (p < 0.05) after adjusting for propensity and covariates and was statistically explained by the reduced antisocial behaviour ratings in MTFC. These analyses support the use of MTFC for youth in public care but only for those with higher levels of antisocial behaviour. Further work is needed on whether such benefits persist, and on possible negative effects of this treatment for those with low antisocial behaviour.Trial Registry Name: ISRCTNRegistry identification number: ISRCTN 68038570Registry URL: www.isrctn.com.

Recent Advances in X-ray Cone-beam Computed Laminography.

X-ray computed tomography is an established volume imaging technique used routinely in medical diagnosis, industrial non-destructive testing, and a wide range of scientific fields. Traditionally, computed tomography uses scanning geometries with a single axis of rotation together with reconstruction algorithms specifically designed for this setup. Recently there has however been increasing interest in more complex scanning geometries. These include so called X-ray computed laminography systems capable of imaging specimens with large lateral dimensions or large aspect ratios, neither of which are well suited to conventional CT scanning procedures. Developments throughout this field have thus been rapid, including the introduction of novel system trajectories, the application and refinement of various reconstruction methods, and the use of recently developed computational hardware and software techniques to accelerate reconstruction times. Here we examine the advances made in the last several years and consider their impact on the state of the art.

High resolution synchrotron imaging of wheat root hairs growing in soil and image based modelling of phosphate uptake.

· Root hairs are known to be highly important for uptake of sparingly soluble nutrients, particularly in nutrient deficient soils. Development of increasingly sophisticated mathematical models has allowed uptake characteristics to be quantified. However, modelling has been constrained by a lack of methods for imaging live root hairs growing in real soils. · We developed a plant growth protocol and used Synchrotron Radiation X-ray Tomographic Microscopy (SRXTM) to uncover the three-dimensional (3D) interactions of root hairs in real soil. We developed a model of phosphate uptake by root hairs based directly on the geometry of hairs and associated soil pores as revealed by imaging. · Previous modelling studies found that root hairs dominate phosphate uptake. By contrast, our study suggests that hairs and roots contribute equally. We show that uptake by hairs is more localized than by roots and strongly dependent on root hair and aggregate orientation. · The ability to image hair-soil interactions enables a step change in modelling approaches, allowing a more realistic treatment of processes at the scale of individual root hairs in soil pores.

A high-throughput 3D X-ray histology facility for biomedical research and preclinical applications.

Background: The University of Southampton, in collaboration with the University Hospital Southampton (UHS) NHS Foundation Trust and industrial partners, has been at the forefront of developing three-dimensional (3D) imaging workflows using X-ray microfocus computed tomography (µCT) -based technology. This article presents the outcomes of these endeavours and highlights the distinctive characteristics of a µCT facility tailored explicitly for 3D X-ray Histology, with a primary focus on applications in biomedical research and preclinical and clinical studies. Methods: The UHS houses a unique 3D X-ray Histology (XRH) facility, offering a range of services to national and international clients. The facility employs specialised µCT equipment explicitly designed for histology applications, allowing whole-block XRH imaging of formalin-fixed and paraffin-embedded tissue specimens. It also enables correlative imaging by combining µCT imaging with other microscopy techniques, such as immunohistochemistry (IHC) and serial block-face scanning electron microscopy, as well as data visualisation, image quantification, and bespoke analysis. Results: Over the past seven years, the XRH facility has successfully completed over 120 projects in collaboration with researchers from 60 affiliations, resulting in numerous published manuscripts and conference proceedings. The facility has streamlined the µCT imaging process, improving productivity and enabling efficient acquisition of 3D datasets. Discussion & Conclusions: The 3D X-ray Histology (XRH) facility at UHS is a pioneering platform in the field of histology and biomedical imaging. To the best of our knowledge, it stands out as the world's first dedicated XRH facility, encompassing every aspect of the imaging process, from user support to data generation, analysis, training, archiving, and metadata generation. This article serves as a comprehensive guide for establishing similar XRH facilities, covering key aspects of facility setup and operation. Researchers and institutions interested in developing state-of-the-art histology and imaging facilities can utilise this resource to explore new frontiers in their research and discoveries.

Maternal enhancement of cytotype regulation in Drosophila melanogaster by genetic interactions between telomeric P elements and non-telomeric transgenic P elements.

The X-linked telomeric P elements (TPs) TP5 and TP6 regulate the activity of the entire P element family because they are inserted in a major locus for the production of Piwi-interacting RNAs (piRNAs). The potential for this cytotype regulation is significantly strengthened when either TP5 or TP6 is combined with a non-telomeric X-linked or autosomal transgene that contains a P element. By themselves, none of the transgenic P elements have any regulatory ability. Synergism between the telomeric and transgenic P elements is much greater when the TP is derived from a female. Once an enhanced regulatory state is established in a female, it is transmitted to her offspring independently of either the telomeric or transgenic P elements - that is, it works through a strictly maternal effect. Synergistic regulation collapses when either the telomeric or the transgenic P element is removed from the maternal genotype, and it is significantly impaired when the TPs come from stocks heterozygous for mutations in the genes aubergine, piwi or Su(var)205. The synergism between telomeric and transgenic P elements is consistent with a model in which P piRNAs are amplified by alternating, or ping-pong, targeting of primary piRNAs to sense and antisense P transcripts, with the sense transcripts being derived from the transgenic P element and the antisense transcripts being derived from the TP.

Utilising acoustic mist ionisation mass spectrometry to identify redox cycling compounds in high throughput screening outputs.

Rapid triage of compounds acting via undesired mechanisms is a crucial stage in a high-throughput screening (HTS) cascade to ensure time and resource is efficiently assigned to the most propitious hits. Redox cycling compounds (RCCs) produce reactive oxygen species, such as hydrogen peroxide, which can impair protein function and appear as hits against liable targets. Direct measurement of tris(2-carboxyethyl)phosphine (TCEP) oxidation has been demonstrated as a sensitive and accurate measure of redox cycling [1]. However, the current nuclear magnetic resonance (NMR) based detection method is not compatible with the throughput required for triage of a HTS campaign. Here we employ Acoustic Mist Ionisation Mass Spectrometry (AMI-MS) [2] to rapidly measure oxidation of TCEP and accurately identify redox cyclers in a high throughput manner.

High-throughput detection of metal contamination in HTS outputs.

Large compound libraries utilised for HTS often include metal contaminated compounds which can interfere with assay signal or target biology, and therefore appear as hits. Pursuit of these compounds can divert considerable time and resource away from more propitious hits, yet there is currently no established method of detecting metal impurities in a rapid and effective manner. Here we describe the development and application of a high-throughput method to identify metal contaminants using acoustic mist ionisation mass spectrometry (AMI-MS). Although metals species by themselves are not detectable by AMI-MS, we have identified two compounds that chelate metal ions and enable their detection. 6-(diethylamino)-1,3,5-triazine-2,4(1H,3H)-dithione (DMT) and 1-(3-{[4-(4-cyanophenyl)-1-piperidinyl]carbonyl}-4-methylphenyl)-3-ethylthiourea (TU) can form complexes with a range of metal ions. Using a collection of metal catalysts, we have developed two metal chelator assays that collectively allow for the detection of Ag, Au, Co, Cu, Fe, Pd, Pt and Zn. We employed these assays to profile the hit outputs of a Zn liable target, and a Pd liable target, and identified significant quantities of metal contaminated compounds in the HTS outputs. This work provides a method of rapidly identifying metal impurities in hit compounds and has become part of an established workflow in triaging HTS outputs at AstraZeneca, facilitating faster identification of robust lead series.

Fragment screening at AstraZeneca: developing the next generation biophysics fragment set.

Fragment based drug discovery is a critical part of the lead generation toolbox and relies heavily on a readily available, high quality fragment library. Over years of use, the AstraZeneca fragment set had become partially depleted and instances of compound deterioration had been found. It was recognised that a redevelopment was required. This provided an opportunity to evolve our screening sets strategy, whilst ensuring that the quality of the fragment set met the robust requirements of fragment screening campaigns. In this communication we share the strategy employed, in particular highlighting two aspects of our approach that we believe others in the community would benefit from, namely that; (i) fragments were selected with input from Medicinal Chemists at an early stage, and (ii) the library was arranged in a layered format to ensure maximum flexibility on a per target basis.

The Use of Acoustic Mist Ionization Mass Spectrometry for High-Throughput Screening.

It is clear from the analysis of the distribution of approved drug targets that enzymes continue to be a major target class for the pharmaceutical industry. The application of high-throughput screens designed to monitor the activity of these enzyme targets, and the ability of test compounds to modulate this activity, is still the predominant hit finding approach in the industry. The widespread use of enzyme activity-based screens has led to the development of several useful guidelines for the development and validation of robust and reliable assays. Key learnings for the development, validation, and implementation of acoustic mist ionization mass spectrometry for high-throughput enzyme assays are described.

Synchrotron radiation computed laminography for polymer composite failure studies.

Synchrotron radiation computed laminography is applied to the three-dimensional micro-imaging of damage in large polymer composite plates with high spatial resolution. The influence of different experimental conditions is studied with respect to measurement time optimization, dose minimization and reduction of artefacts in the reconstructed images. Failures like delaminations, transverse ply cracks and splits are observed under in situ loads. The propagation of up to 2 mm-long cracks is non-destructively followed in situ and investigated in detail. By phase retrieval using a single detector distance, the failures can be easily visualized in three dimensions.

Applications of the charged aerosol detector in compound management.

Recent literature has described the exciting development of a new universal detection technology for high-performance liquid chromatography (HPLC), as well as some exploratory work on its application to quantitative measurement of solutes at millimolar concentrations. The new methodology, known as charged aerosol detection (CAD), has been recognized as a viable alternative to evaporative light-scattering detection and refractive index detection that, like CAD, respond to molecular structures independently of their absorbance, or lack thereof, in the ultraviolet region of the electromagnetic spectrum. In this article, the authors exemplify their use of CAD in-line with HPLC and mass spectrometry (MS) to provide both stand-alone and complementary information that aids decision making for sample storage and processing practices in the compound management setting. Illustrations include monitoring contaminants leached from different plate materials into the solvent dimethyl sulphoxide (DMSO) and profiling the concentrations of solutions destined for liquid storage and dispensing to assays, with the aim of improving processes.

Acoustic mist ionization mass spectrometry (AMI-MS) as a drug discovery platform.

Introduction: The expansion of label free mass spectrometry into early drug discovery was always predicted to provide improvements in data quality and depth with the potential to reduce costs but has previously been limited by throughput. There are several techniques that vary by sample introduction technology or ionization technique that try to address the challenges in this area. Areas covered: In this review, the authors describe the deployment of such a device, combining acoustic mist ionization and time-of-flight mass spectrometry. The potential impact of this instrument is discussed with case studies reporting screening across a series of enzyme target classes and chemical triage assays which have generated early chemical equity for drug projects. Expert opinion: In our expert opinion, we look forward to the large-scale adoption of mass spectrometry as a high throughput screening approach. The expansion of applications enabled by these technologies such as triage assays and metabolic profiling will also be explored.

Small airways disease in mild and moderate chronic obstructive pulmonary disease: a cross-sectional study.

BACKGROUND: The concept that small conducting airways less than 2 mm in diameter become the major site of airflow obstruction in chronic obstructive pulmonary disease (COPD) is well established in the scientific literature, and the last generation of small conducting airways, terminal bronchioles, are known to be destroyed in patients with very severe COPD. We aimed to determine whether destruction of the terminal and transitional bronchioles (the first generation of respiratory airways) occurs before, or in parallel with, emphysematous tissue destruction. METHODS: In this cross-sectional analysis, we applied a novel multiresolution CT imaging protocol to tissue samples obtained using a systematic uniform sampling method to obtain representative unbiased samples of the whole lung or lobe of smokers with normal lung function (controls) and patients with mild COPD (Global Initiative for Chronic Obstructive Lung Disease [GOLD] stage 1), moderate COPD (GOLD 2), or very severe COPD (GOLD 4). Patients with GOLD 1 or GOLD 2 COPD and smokers with normal lung function had undergone lobectomy and pneumonectomy, and patients with GOLD 4 COPD had undergone lung transplantation. Lung tissue samples were used for stereological assessment of the number and morphology of terminal and transitional bronchioles, airspace size (mean linear intercept), and alveolar surface area. FINDINGS: Of the 34 patients included in this study, ten were controls (smokers with normal lung function), ten patients had GOLD 1 COPD, eight had GOLD 2 COPD, and six had GOLD 4 COPD with centrilobular emphysema. The 34 lung specimens provided 262 lung samples. Compared with control smokers, the number of terminal bronchioles decreased by 40% in patients with GOLD 1 COPD (p=0·014) and 43% in patients with GOLD 2 COPD (p=0·036), the number of transitional bronchioles decreased by 56% in patients with GOLD 1 COPD (p=0·0001) and 59% in patients with GOLD 2 COPD (p=0·0001), and alveolar surface area decreased by 33% in patients with GOLD 1 COPD (p=0·019) and 45% in patients with GOLD 2 COPD (p=0·0021). These pathological changes were found to correlate with lung function decline. We also showed significant loss of terminal and transitional bronchioles in lung samples from patients with GOLD 1 or GOLD 2 COPD that had a normal alveolar surface area. Remaining small airways were found to have thickened walls and narrowed lumens, which become more obstructed with increasing COPD GOLD stage. INTERPRETATION: These data show that small airways disease is a pathological feature in mild and moderate COPD. Importantly, this study emphasises that early intervention for disease modification might be required by patients with mild or moderate COPD. FUNDING: Canadian Institutes of Health Research.

Surgical scissors extension adds the 7th axis of force feedback to the Freedom 6S.

A virtual reality surgical simulator ideally allows seamless transition between the real and virtual world. In that respect, all of a surgeon's motions and tools must be simulated. Until now researchers have been limited to using a pen-like tool in six degrees-of-freedom. This paper presents the addition of haptically enabled scissors to the end effector of a 6-DOF haptic device, the Freedom 6S. The scissors are capable of pinching a maximum torque of 460 mN.m with low inertia and low back-drive friction. The device is a balanced design so that the user feels like they are holding no more than actual scissors, although with some added inertia on the load end. The system is interchangeable between the 6-DOF and 7-DOF configurations to allow switching tools quickly.