Fli1 Promotes Vascular Morphogenesis by Regulating Endothelial Potential of Multipotent Myogenic Progenitors.

[Figure: see text].

Marker trait association for biological nitrogen fixation traits in an interspecific cross of chickpea (Cicer arietinum × Cicer reticulatum).

A set of 165 Recombinant inbred lines (RILs) derived from an interspecific cross of chickpea was used to identify QTLs for key biological nitrogen fixation (BNF) traits. The phenotyping of BNF and related traits was done at two different agroclimatic zones viz., Central plain zone (Ludhiana) and Sub-Mountainous undulating zone (Gurdaspur) for 2 consecutive rabi seasons (2018-2020). Wild parent C. reticulatum ILWC292 showed significantly high performance in terms of biological nitrogen fixation (BNF) traits over the cultivated C. arietinum GPF-2. The triple interaction of genotypes × locations × years was significant (p 0.05) for all BNF traits in parental lines. Highly significant positive correlation was obtained between grain yield and key growth and symbiotic parameters at both the sites. Phenotypic analysis revealed nodule dry weight and leghaemoglobin content as key traits for BNF efficiency and contrasting DNA bulks were constituted on the basis of these traits. Out of 535 SSR markers, 139 exhibited polymorphism between the parental lines on polyacrylamide gel electrophoresis. A total of 30 SSR markers showed polymorphism between the higher and lower bulks for nodule dry weight and leghaemoglobin content. Out of these, 20 SSRs did not show any segregation distortion in RIL population as determined by chi square analysis (p < 0.05) and were used for quantitative trait loci (QTL) analysis. Using QTL cartographer, markers- CAGM02697, CAGM09835, CAGM09777, CAGM09227, CAGM09021, CAGM08679 were found linked with QTLs for BNF. These markers can be validated further for identification of genes for BNF traits and marker assisted selection in chickpea. To the best of our knowledge this is the first report on identification of genomic regions associated with key BNF traits in chickpea across different agro-climatic zones. Supplementary information: The online version contains supplementary material available at 10.1007/s12298-023-01335-3.

Global-level population genomics reveals differential effects of geography and phylogeny on horizontal gene transfer in soil bacteria.

Although microorganisms are known to dominate Earth's biospheres and drive biogeochemical cycling, little is known about the geographic distributions of microbial populations or the environmental factors that pattern those distributions. We used a global-level hierarchical sampling scheme to comprehensively characterize the evolutionary relationships and distributional limitations of the nitrogen-fixing bacterial symbionts of the crop chickpea, generating 1,027 draft whole-genome sequences at the level of bacterial populations, including 14 high-quality PacBio genomes from a phylogenetically representative subset. We find that diverse Mesorhizobium taxa perform symbiosis with chickpea and have largely overlapping global distributions. However, sampled locations cluster based on the phylogenetic diversity of Mesorhizobium populations, and diversity clusters correspond to edaphic and environmental factors, primarily soil type and latitude. Despite long-standing evolutionary divergence and geographic isolation, the diverse taxa observed to nodulate chickpea share a set of integrative conjugative elements (ICEs) that encode the major functions of the symbiosis. This symbiosis ICE takes 2 forms in the bacterial chromosome-tripartite and monopartite-with tripartite ICEs confined to a broadly distributed superspecies clade. The pairwise evolutionary relatedness of these elements is controlled as much by geographic distance as by the evolutionary relatedness of the background genome. In contrast, diversity in the broader gene content of Mesorhizobium genomes follows a tight linear relationship with core genome phylogenetic distance, with little detectable effect of geography. These results illustrate how geography and demography can operate differentially on the evolution of bacterial genomes and offer useful insights for the development of improved technologies for sustainable agriculture.

Phenotypic evaluation of agronomic and root related traits for drought tolerance in recombinant inbred line population derived from a chickpea cultivar (C. arietinum L.) and its wild relative (C. reticulatum).

Drought is a major abiotic stress that drastically reduces chickpea yields. The present study was aimed to identify drought-responsive traits in chickpea by screening a recombinant inbred line population derived from an inter-specific cross between drought cultivar of GPF2 (C. arietinum L.) and drought sensitive accession of ILWC292 (C. reticulatum), at two locations in India. Twenty-one traits, including twelve morphological and physiological traits and nine root-related traits were measured under rainfed (drought-stress) and irrigated conditions (no-stress). High genotypic variation was observed among RILs for yield and root traits indicated that selection in these germplasms would be useful in achieving genetic progress. Both correlation and principal component analysis revealed that plant height, number of pods per plant, biomass, 100-seed weight, harvest index, membrane permeability index, and relative leaf water content were significantly correlated with yield under both irrigated and drought stress environments. Root length had significant positive correlations with all root-related traits except root length density in drought-stressed plants. Path analysis and multiple and stepwise regression analyses showed that number of pods per plant, biomass, and harvest index were major contributors to yield under drought stress conditions. Thus, a holistic approach across these analyses identified number of pods per plant, biomass, harvest index, and root length as key traits for improving chickpea yield through indirect selection for developing drought-tolerant cultivars. Overall, on the basis of yield components morphological and root traits, a total of 15 promising RILs were identified for their use in chickpea breeding programs for developing drought tolerant cultivars. Supplementary Information: The online version contains supplementary material available at 10.1007/s12298-022-01218-z.

Molecular mapping of quantitative trait loci for ascochyta blight and botrytis grey mould resistance in an inter-specific cross in chickpea (Cicer arietinum L.) using genotyping by sequencing.

Ascochyta blight (AB) and botrytis grey mould (BGM) are the most devastating fungal diseases of chickpea worldwide. The wild relative of chickpea, C. reticulatum acc. ILWC 292 was found resistant to BGM whereas, GPF2 (Cicer arietinum L.) is resistant to AB. A total of 187 F8 Recombinant Inbred Lines (RILs) developed from an inter-specific cross of GPF2 × C. reticulatum acc. ILWC 292 were used to identify quantitative trait loci (QTLs) responsible for resistance to AB and BGM. RILs along with parents were evaluated under artificial epiphytotic field/laboratory conditions for two years. Highly significant differences (P < 0.001) were observed for reaction to both pathogens in both years. Parents and RILs were genotyped-by-sequencing to identify genome wide single nucleotide polymorphism (SNPs). A total of 1365 filtered and parental polymorphic SNPs were used for linkage map construction, of which, 673 SNPs were arranged on eight linkage groups. Composite interval mapping revealed three QTLs for AB and four QTLs for BGM resistance. Out of which, two QTLs for AB and three QTLs for BGM were consistent in both years. These QTLs can be targeted for further fine mapping for deployment of resistance to AB and BGM in elite chickpea cultivars using marker-assisted-selection.

Phenotypic evaluation of genetic variability and selection of yield contributing traits in chickpea recombinant inbred line population under high temperature stress.

Heat is a major abiotic stress that drastically reduces chickpea yield. This study aimed to identify heat-responsive traits to sustain crop productivity by screening a recombinant inbred line (RILs) population at two locations in India (Ludhiana and Faridkot). The RIL population was derived from an inter-specific cross between heat-tolerant genotype GPF 2 (C. arietinum L.) and heat sensitive accession ILWC 292 (C. reticulatum). The pooled analysis of variance showed highly significant differences for all the traits in RILs and most of the traits were significantly affected by heat stress at both locations. High values of genotypic coefficient of variation (19.52-38.53%), phenotypic coefficient of variation (20.29-39.85%), heritability (92.50-93.90%), and genetic advance as a percentage of mean (38.68-76.74%) have been observed for plant height, number of pods per plant, biomass, yield, and hundred seed weight across the heat stress environments. Association studies and principal component analysis showed a significant positive correlation of plant height, number of pods per plant, biomass, hundred seed weight, harvest index, relative leaf water content, and pollen viability with yield under both timely-sown and late-sown conditions. Path analysis revealed that biomass followed by harvest index was the major contributor to yield among the environments. Both step-wise and multiple regression analyses concluded that number of pods per plant, biomass and harvest index consistently showed high level of contribution to the total variation in yield under both timely-sown and late-sown conditions. Thus, the holistic approach of these analyses illustrated that the promising traits provide a framework for developing heat-tolerant cultivars in chickpea. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s12298-021-00977-5.

Genetic Dissection and Identification of Candidate Genes for Salinity Tolerance Using Axiom®CicerSNP Array in Chickpea.

Globally, chickpea production is severely affected by salinity stress. Understanding the genetic basis for salinity tolerance is important to develop salinity tolerant chickpeas. A recombinant inbred line (RIL) population developed using parental lines ICCV 10 (salt-tolerant) and DCP 92-3 (salt-sensitive) was screened under field conditions to collect information on agronomy, yield components, and stress tolerance indices. Genotyping data generated using Axiom®CicerSNP array was used to construct a linkage map comprising 1856 SNP markers spanning a distance of 1106.3 cM across eight chickpea chromosomes. Extensive analysis of the phenotyping and genotyping data identified 28 quantitative trait loci (QTLs) explaining up to 28.40% of the phenotypic variance in the population. We identified QTL clusters on CaLG03 and CaLG06, each harboring major QTLs for yield and yield component traits under salinity stress. The main-effect QTLs identified in these two clusters were associated with key genes such as calcium-dependent protein kinases, histidine kinases, cation proton antiporter, and WRKY and MYB transcription factors, which are known to impart salinity stress tolerance in crop plants. Molecular markers/genes associated with these major QTLs, after validation, will be useful to undertake marker-assisted breeding for developing better varieties with salinity tolerance.

Introgression of productivity enhancing traits, resistance to pod borer and Phytopthora stem blight from Cajanus scarabaeoides to cultivated pigeonpea.

The study aimed at introgression of productivity enhancing traits and resistance to pod borer and Phytophthora stem blight from wild to cultivated pigeonpea through an inter-specific cross between Cajanus scarabaeoides (ICP 15683) and C. cajan (ICPL 20329). Progenies derived from the direct segregating (without backcross) population and backcross population were evaluated for yield and yield contributing traits namely fruiting branches and pods plant-1 and 100-seed weight. Introgressed progenies having higher fruiting branches, pods and yield plant-1 compared to the cultivated parent were identified in both populations. A few progenies with significantly shorter plant height, early flowering and early maturity as compared to both cultivated and wild parents were also recovered in both populations. Progenies from both the populations were identified with higher resistance to pod borer and Phytophthora stem blight. However, some introgressed progenies having lower seed weight and seeds per pod were also recovered. The promising progenies are currently being used in the breeding programme to develop cultivars with improved productivity and resistance to pod borer and Phytophthora stem blight.

Comparison of cultivated and wild chickpea genotypes for nutritional quality and antioxidant potential.

Fifteen cultivated (Ten desi, five kabuli) and fifteen wild species of chickpea (Cicer arietinum L.) were compared for nutritional traits, antinutritional factors and antioxidant potential. The average crude protein content in desi, kabuli and wild species was found to be 25.31%, 24.67% and 24.30%, respectively; total soluble sugars in these genotypes were 38.08, 43.75 and 33.20 mg/g, respectively and total starch content in these genotypes was 34.43, 33.43 and 28.77%. Wild species had higher antioxidant potential as compared to cultivated genotypes due to higher free radical scavenging activity, ferric reducing antioxidant power and reducing power. Kabuli genotypes had lower antioxidant potential than desi genotypes. Desi genotype, GL 12021 had high crude protein and total starch content, lower phytic acid and saponin content and higher antioxidant potential. GNG 2171 had high crude protein and total soluble sugar content and lower tannin and phytic acid content. Kabuli genotype L 552 possessed high total soluble sugar and total starch content, high Zn and Fe content and lower tannin, saponin and trypsin inhibitor content. Wild species C. pin ILWC 261 had high crude protein, lower phytic acid and trypsin inhibitor content and higher DPPH radical scavenging activity and hydroxyl radical scavenging activity. The observed diversity for quality traits in cultivated and wild genotypes can be further used.

Impact of heat stress during seed filling on seed quality and seed yield in lentil (Lens culinaris Medikus) genotypes.

BACKGROUND: Lentil, a cool-season food legume, is highly sensitive to high temperatures, which drastically reduce biomass and seed yield. The effects of heat stress on qualitative and quantitative aspects of seeds are not yet known. RESULTS: In this study, we assessed the effects of high temperatures on quantitative and qualitative aspects of seeds in a heat-tolerant (HT; FLIP2009) and heat-sensitive (HS; IG4242) genotypes in a controlled environment. Initially, the plants were raised in a natural, outdoor environment (22/10 °C mean day/night temperature, 1350 µmol m-2 s-1 light intensity, 60-65% relative humidity) from November to mid-February until 50% flowering (114-115 days after sowing). After that, one set of plants was maintained in a controlled environment (28/23 °C, as mean day and night temperature, 500 µmol m-2 s-1 light intensity, 60-65% relative humidity;control) and one set was exposed to heat stress (33/28 °C, as mean day and night temperature, 500 µmol m-2 s-1 light intensity, 60-65% relative humidity), where they remained until maturity. Compared to control, heat stress reduced the seed growth rate by 30-44% and the seed-filling duration by 5.5-8.1 days, which ultimately reduced the seed yield by 38-58% and individual seed weights by 20-39%. Heat stress significantly damaged cell membranes and reduced chlorophyll concentration and fluorescence, and the photosynthetic rate, which was associated with a significant reduction in relative leaf water content. The proximate analysis of seed reserves showed that heat stress reduced starch (25-43%), protein (26-41%) and fat (39-57%) content, and increased total sugars (36-68%), relative to the controls. Heat stress also inhibited the accumulation of storage proteins including albumins, globulins, prolamins and glutelins (22-42%). Most of the amino acids decreased significantly under heat stress in comparison to control, whereas some, such as proline, followed by glycine, alanine, isoleucine, leucine and lysine, increased. Heat stress reduced Ca (13-28%), Fe (17-52%), P (10-54%), K (12.4-28.3%) and Zn (36-59%) content in seeds, compared to the controls. CONCLUSIONS: High temperatures during seed filling are detrimental for seed yield and quality components in lentil genotypes, with severe impacts on heat-sensitive genotypes. © 2018 Society of Chemical Industry.

Cytoglobin modulates myogenic progenitor cell viability and muscle regeneration.

Mammalian skeletal muscle can remodel, repair, and regenerate itself by mobilizing satellite cells, a resident population of myogenic progenitor cells. Muscle injury and subsequent activation of myogenic progenitor cells is associated with oxidative stress. Cytoglobin is a hemoprotein expressed in response to oxidative stress in a variety of tissues, including striated muscle. In this study, we demonstrate that cytoglobin is up-regulated in activated myogenic progenitor cells, where it localizes to the nucleus and contributes to cell viability. siRNA-mediated depletion of cytoglobin from C2C12 myoblasts increased levels of reactive oxygen species and apoptotic cell death both at baseline and in response to stress stimuli. Conversely, overexpression of cytoglobin reduced reactive oxygen species levels, caspase activity, and cell death. Mice in which cytoglobin was knocked out specifically in skeletal muscle were generated to examine the role of cytoglobin in vivo. Myogenic progenitor cells isolated from these mice were severely deficient in their ability to form myotubes as compared with myogenic progenitor cells from wild-type littermates. Consistent with this finding, the capacity for muscle regeneration was severely impaired in mice deficient for skeletal-muscle cytoglobin. Collectively, these data demonstrate that cytoglobin serves an important role in muscle repair and regeneration.

Calcineurin and its regulator, RCAN1, confer time-of-day changes in susceptibility of the heart to ischemia/reperfusion.

Many important components of the cardiovascular system display circadian rhythmicity. In both humans and mice, cardiac damage from ischemia/reperfusion (I/R) is greatest at the transition from sleep to activity. The causes of this window of susceptibility are not fully understood. In the murine heart we have reported high amplitude circadian oscillations in the expression of the cardioprotective protein regulator of calcineurin 1 (Rcan1). This study was designed to test whether Rcan1 contributes to the circadian rhythm in cardiac protection from I/R damage. Wild type (WT), Rcan1 KO, and Rcan1-Tg mice, with cardiomyocyte-specific overexpression of Rcan1, were subjected to 45min of myocardial ischemia followed by 24h of reperfusion. Surgeries were performed either during the first 2h (AM) or during the last 2h (PM) of the animal's light phase. The area at risk was the same for all genotypes at either time point; however, in WT mice, PM-generated infarcts were 78% larger than AM-generated infarcts. Plasma cardiac troponin I levels were likewise greater in PM-operated animals. In Rcan1 KO mice there was no significant difference between the AM- and PM-operated hearts, which displayed greater indices of damage similar to that of PM-operated WT animals. Mice with cardiomyocyte-specific overexpression of human RCAN1, likewise, showed no time-of-day difference, but had smaller infarcts comparable to those of AM-operated WT mice. In vitro, cardiomyocytes depleted of RCAN1 were more sensitive to simulated I/R and the calcineurin inhibitor, FK506, restored protection. FK506 also conferred protection to PM-infarcted WT animals. Importantly, transcription of core circadian clock genes was not altered in Rcan1 KO hearts. These studies identify the calcineurin/Rcan1-signaling cascade as a potential therapeutic target through which to benefit from innate circadian changes in cardiac protection without disrupting core circadian oscillations that are essential to cardiovascular, metabolic, and mental health.

Induced changes in the antioxidative compounds of Vigna mungo genotypes due to infestation by Bemisia tabaci (Gennadius).

Antioxidative compounds were quantified from the leaves of nine black gram (Vigna mungo (L.) Hepper) genotypes over a period of two years, for potential whitefly, Bemisia tabaci (Gennadius) (Hemiptera: Aleryrodidae) resistance. Oviposition preference, nymphal and adult development were evaluated under screen-house conditions. Biochemical analysis revealed that higher per cent increase in the total phenol and o-dihydroxy phenol contents both at 30 and 50 days after sowing was evident in moderately resistant genotypes NDU 5-7 (49.6 and 50.8%, respectively) and KU 99-20 (47.8 and 50.8%, respectively) under whitefly stress conditions as compared to non-stressed plants. Tannin and flavonol contents in leaves increased to varying degrees (up to 11.1 and 7.1%, respectively) in resistant plants after whitefly infestation, indicating that the changes in tannin and flavonol contents were closely associated with the resistance to whitefly. Correlation studies relating leaf content of black gram antioxidative compounds from different genotypes with whitefly population were also worked out. Total phenols (r = -0.71 & -0.88), o- dihydroxy phenols (r = -0.56 & -0.76), flavonols (r = -0.80 & -0.81) and tannins (r= -0.16 & -0.26) showed significant negative correlation with whitefly population (nymphs and adults) suggesting that enhanced level of these biochemicals may contribute to bioprotection of black gram plants against B. tabaci infestation. Comparatively higher level of resistance in genotype NDU 5-7 and KU 99-20 can serve as base for genetic improvement of black gram, focusing on the development of resistant varieties to B. tabaci.

Impact of phosphorous-deficit conditions on morpho-physiological traits and phosphorous metabolism in chickpea genotypes.

Chickpea, an important food legume, is primarily grown on marginal soils with low soil fertility. Although chickpea can fix N, soil phosphorus (P) deficiency in crop growing areas is a major limiting factor for chickpea production. This study was undertaken to evaluate twenty-five chickpea cultivars for morpho-physiological traits and yield under low and normal phosphorous conditions. Based on morpho-physiological traits such as length and area of roots and shoots, root length density, root and shoot biomass, chlorophyll content, number of nodules and root tips, tolerance indices and yield, these cultivars were characterised into susceptible (ICC67, ICC1915, ICC2593, ICC5337, ICC5879, ICC8950, ICC13441, ICC1483, ICC15606 and ICC15888), tolerant (ICC10755, IG72070, ICCV97105, ICCV2, ICCV92809, ICCV92337 and ICCV95423) and the remaining cultivars were moderately tolerant to phosphorous-deficit conditions. Higher activities of enzymes of phosphorous metabolism such as acid phosphatase and phytase in roots and nodules of tolerant chickpea cultivars (ICCV97105, ICCV92337, ICCV95423) as compared to susceptible cultivars (ICC67, ICC15606, ICC15888) at different developmental stages might be attributing to their better performance for growth parameters and productivity traits under phosphorous-deficit conditions.

Identification of promising chickpea interspecific derivatives for agro-morphological and major biotic traits.

The wild Cicer species is well-known for having climate-resilient and productivity-enhancing traits of interest. Therefore, wide hybridization could be used as a realistic strategy for introgressing prospective traits from wild species into the cultivated gene pool. The present study was, thus, undertaken to evaluate F7 chickpea interspecific derivatives derived from Cicer reticulatum Ladiz. and C. echinospermum P. H. Davis wild annual Cicer species. As a result, a set of six interspecific crosses were advanced using the single seed descent (SSD) method of breeding. The F7 generation of these crosses was assessed in two diverse agro-ecological regions of India. The data revealed a wide range of variation with respect to seed yield and its important component traits, which resulted in the identification of the most promising derivatives carrying desirable characters as indicated by range, mean, and coefficient of variation. Further, fruitful heterosis was also estimated as promising selection criteria for identifying superior lines for earliness and high seed yield, including resistance against prevailing stresses (ascochyta blight, botrytis gray mold, dry root rot, and fusarium wilt). The superior derivatives carrying putative characters could be recommended for further breeding and selection of genetic materials for developing suitable genotypes.

Novel Genomic Regions Linked to Ascochyta Blight Resistance in Two Differentially Resistant Cultivars of Chickpea.

Ascochyta blight (AB), caused by the fungal pathogen Ascochyta rabiei, is a devastating foliar disease of chickpea (Cicer arietinum L.). The genotyping-by-sequencing (GBS)-based approach was deployed for mapping QTLs associated with AB resistance in chickpea in two recombinant inbred line populations derived from two crosses (AB3279 derived from ILC 1929 × ILC 3279 and AB482 derived from ILC 1929 × ILC 482) and tested in six different environments. Twenty-one different genomic regions linked to AB resistance were identified in regions CalG02 and CalG04 in both populations AB3279 and AB482. These regions contain 1,118 SNPs significantly associated with AB resistance (p ≤ 0.001), which explained 11.2-39.3% of the phenotypic variation (PVE). Nine of the AB resistance-associated genomic regions were newly detected in this study, while twelve regions were known from previous AB studies. The proposed physical map narrows down AB resistance to consistent genomic regions identified across different environments. Gene ontology (GO) assigned these QTLs to 319 genes, many of which were associated with stress and disease resistance, and with most important genes belonging to resistance gene families such as leucine-rich repeat (LRR) and transcription factor families. Our results indicate that the flowering-associated gene GIGANTEA is a possible key factor in AB resistance in chickpea. The results have identified AB resistance-associated regions on the physical genetic map of chickpea and allowed for the identification of associated markers that will help in breeding of AB-resistant varieties.

Introgressing cry1Ac for Pod Borer Resistance in Chickpea Through Marker-Assisted Backcross Breeding.

The gram pod borer Helicoverpa armigera is a major constraint to chickpea (Cicer arietinum L.) production worldwide, reducing crop yield by up to 90%. The constraint is difficult to overcome as chickpea germplasm including wild species either lacks pod borer resistance or if possessing resistance is cross-incompatible. This study describes conversion of elite but pod borer-susceptible commercial chickpea cultivars into resistant cultivars through introgression of cry1Ac using marker-assisted backcross breeding. The chickpea cultivars (PBG7 and L552) were crossed with pod borer-resistant transgenic lines (BS 100B and BS 100E) carrying cry1Ac that led to the development of BC1F1, BC1F2, BC1F3, BC2F1, BC2F2, and BC2F3 populations from three cross combinations. The foreground selection revealed that 35.38% BC1F1 and 8.4% BC1F2 plants obtained from Cross A (PBG7 × BS 100B), 50% BC1F1 and 76.5% BC1F2 plants from Cross B (L552 × BS 100E), and 12.05% BC2F2 and 82.81% (average) BC2F3 plants derived from Cross C (PBG7 × BS 100E) carried the cry1Ac gene. The bioassay of backcross populations for toxicity to H. armigera displayed up to 100% larval mortality. BC1F1 and BC1F2 populations derived from Cross B and BC2F3 population from Cross C segregated in the Mendelian ratio for cry1Ac confirmed inheritance of a single copy of transgene, whereas BC1F1 and BC1F2 populations obtained from Cross A and BC2F2 population from Cross C exhibited distorted segregation ratios. BC1F1 plants of Cross A and Cross B accumulated Cry1Ac protein ranging from 11.03 to 11.71 µgg-1 in leaf tissue. Cry1Ac-positive BC2F2 plants from Cross C demonstrated high recurrent parent genome recovery (91.3%) through background selection using SSR markers and phenome recovery of 90.94%, amongst these 30% plants, were homozygous for transgene. The performance of BC2F3 progenies derived from homozygous plants was similar to that of the recurrent parent for main agronomic traits, such as number of pods and seed yield per plant. These progenies are a valuable source for H. armigera resistance in chickpea breeding programs.

Genetic mapping of QTLs for drought tolerance in chickpea (Cicer arietinum L.).

Chickpea yield is severely affected by drought stress, which is a complex quantitative trait regulated by multiple small-effect genes. Identifying genomic regions associated with drought tolerance component traits may increase our understanding of drought tolerance mechanisms and assist in the development of drought-tolerant varieties. Here, a total of 187 F8 recombinant inbred lines (RILs) developed from an interspecific cross between drought-tolerant genotype GPF 2 (Cicer arietinum) and drought-sensitive accession ILWC 292 (C. reticulatum) were evaluated to identify quantitative trait loci (QTLs) associated with drought tolerance component traits. A total of 21 traits, including 12 morpho-physiological traits and nine root-related traits, were studied under rainfed and irrigated conditions. Composite interval mapping identified 31 QTLs at Ludhiana and 23 QTLs at Faridkot locations for morphological and physiological traits, and seven QTLs were identified for root-related traits. QTL analysis identified eight consensus QTLs for six traits and five QTL clusters containing QTLs for multiple traits on linkage groups CaLG04 and CaLG06. The identified major QTLs and genomic regions associated with drought tolerance component traits can be introgressed into elite cultivars using genomics-assisted breeding to enhance drought tolerance in chickpea.

Assessing the heat sensitivity of Urdbean (Vigna mungo L. Hepper) genotypes involving physiological, reproductive and yield traits under field and controlled environment.

The rising temperatures are seriously impacting the food crops, including urdbean; hence efforts are needed to identify the sources of heat tolerance in such crops to ensure global food security. In the present study, urdbean genotypes were evaluated for heat tolerance under natural outdoor for two consecutive years (2018, 2019) and subsequently in the controlled environment of the growth chamber to identify high temperature tolerant lines. The genotypes were assessed involving few physiological traits (membrane damage, chlorophyll, photosynthetic efficiency, stomatal conductance, lipid peroxidation), reproductive traits (pollen germination % and pollen viability %) and yield related traits (total number of pods plant-1, total seeds plant-1, single seed weight and seed yield plant-1). Based upon these tested traits, PantU31, Mash114, UTTARA and IPU18-04 genotypes were identified as promising genotypes for both years under heat stress condition. Further confirming heat tolerance, all these four tolerant and four sensitive genotypes were tested under controlled environment under growth chamber condition. All these four genotypes PantU31, Mash114, UTTARA and IPU18-04 showed high chlorophyll content, photosynthetic efficiency, stomatal conductance, leaf area, pods plant-1, total seeds plant-1 and low reduction in pollen germination % and pollen viability under stress heat stress condition. Moreover, yield and yield related traits viz., pods plant-1, seeds plant-1, single seed weight and seed yield plant-1 showed very strong positive correlation with pollen germination and pollen viability except electrolyte leakage and malondialdehyde content. Thus, these genotypes could be potentially used as donors for transferring heat tolerance trait to the elite yet heat-sensitive urdbean cultivars.

Development of High Yielding Fusarium Wilt Resistant Cultivar by Pyramiding of "Genes" Through Marker-Assisted Backcrossing in Chickpea (Cicer arietinum L.).

Pusa 391, a mega desi chickpea variety with medium maturity duration is extensively cultivated in the Central Zone of India. Of late, this variety has become susceptible to Fusarium wilt (FW), which has drastic impact on its yield. Presence of variability in the wilt causing pathogen, Fusarium oxysporum f.sp. ciceri (foc) across geographical locations necessitates the role of pyramiding for FW resistance for different races (foc 1,2,3,4 and 5). Subsequently, the introgression lines developed in Pusa 391 genetic background were subjected to foreground selection using three SSR markers (GA16, TA 27 and TA 96) while 48 SSR markers uniformly distributed on all chromosomes, were used for background selection to observe the recovery of recurrent parent genome (RPG). BC1F1 lines with 75-85% RPG recovery were used to generate BC2F1. The plants that showed more than 90% RPG recovery in BC2F1 were used for generating BC3F1. The plants that showed more than 96% RPG recovery were selected and selfed to generate BC3F3. Multi-location evaluation of advanced introgression lines (BC2F3) in six locations for grain yield (kg/ha), days to fifty percent flowering, days to maturity, 100 seed weight and disease incidence was done. In case of disease incidence, the genotype IL1 (BGM 20211) was highly resistant to FW in Junagarh, Indore, New Delhi, Badnapur and moderately resistant at Sehore and Nandyal. GGE biplot analysis revealed that IL1(BGM20211) was the most stable genotype at Junagadh, Sehore and Nandyal. GGE biplot analysis revealed that IL1(BGM 20211) and IL4(BGM 20212) were the top performers in yield and highly stable across six environments and were nominated for Advanced Varietal Trials (AVT) of AICRP (All India Coordinated Research Project on Chickpea) in 2018-19. BGM20211 and BGM 20212 recorded 29 and 28.5% average yield gain over the recurrent parent Pusa 391, in the AVT-1 and AVT-2 over five environments. Thus, BGM20211 was identified for release and notified as Pusa Manav/Pusa Chickpea 20211 for Madhya Pradesh, Gujarat and Maharashtra, Southern Rajasthan, Bundhelkhand region of Uttar Pradesh states by the Central Sub-Committees on Crop Standards, Notification and Release of Varieties of Agricultural Crops, Ministry of Agriculture and Farmers Welfare, Government of India, for commercial cultivation in India (Gazette notification number S.O.500 (E) dt. 29-1-2021).Such pyramided lines give resilience to multiple races of fusarium wilt with added yield advantage.