Dynamics of the energy transfer involved in a diarylethene-perylenebisimide dyad: comparison between the molecule and the nanoparticle level.

Photochromic materials are widely used to achieve fluorescence photoswitching. Understanding the energy transfer processes occurring in these systems would be an advantage for their use and better optimization of their properties. In this scope, we studied a diarylethene-perylenebisimide (DAE-PBI) dyad that presents a bright red emission and a large ON-OFF contrast, both in solution and in an aqueous suspension of nanoparticles (NPs). Using ultrafast transient absorption spectroscopy, the excited state dynamics was characterized for this dyad in THF solution and compared to its behavior in NPs state. An efficient energy transfer process between the PBI fluorophore and the DAE photochromic unit in its closed form was demonstrated, occurring in a few hundreds of femtoseconds.

Cloning and structural basis of fluorescent protein color variants from identical species of sea anemone, Diadumene lineata.

Diadumene lineata is a colorful sea anemone with orange stripe tissue of the body column and plain tentacles with red lines. We subjected Diadumene lineata to expression cloning and obtained genes encoding orange (OFP: DiLiFP561) and red fluorescent proteins (RFPs: DiLiFP570 and DiLiFP571). These proteins formed obligatory tetramers. All three proteins showed bright fluorescence with the brightness of 58.3 mM-1·cm-1 (DiLiFP561), 43.9 mM-1·cm-1 (DiLiFP570), and 31.2 mM-1·cm-1 (DiLiFP571), which were equivalent to that of commonly used red fluorescent proteins. Amplitude-weighted average fluorescence lifetimes of DiLiFP561, DiLiFP570 and DiLiFP571 were determined as 3.7, 3.6 and 3.0 ns. We determined a crystal structure of DiLiFP570 at 1.63 Å resolution. The crystal structure of DiLiFP570 revealed that the chromophore has an extended π-conjugated structure similar to that of DsRed. Most of the amino acid residues surrounding the chromophore were common between DiLiFP570 and DiLiFP561, except M159 of DiLiFP570 (Lysine in DiLiFP561), which is located close to the chromophore hydroxyl group. Interestingly, a similar K-to-M substitution has been reported in a red-shifted variant of DsRed (mRFP1). It is a striking observation that the naturally evolved color-change variants are consistent with the mutation induced via protein engineering processes. The newly cloned proteins are promising as orange and red fluorescent markers for imaging with long fluorescence lifetime.

Oligomerization processes limit photoactivation and recovery of the orange carotenoid protein.

The orange carotenoid protein (OCP) is a photoactive protein involved in cyanobacterial photoprotection by quenching of the excess of light-harvested energy. The photoactivation mechanism remains elusive, in part due to absence of data pertaining to the timescales over which protein structural changes take place. It also remains unclear whether or not oligomerization of the dark-adapted and light-adapted OCP could play a role in the regulation of its energy-quenching activity. Here, we probed photoinduced structural changes in OCP by a combination of static and time-resolved X-ray scattering and steady-state and transient optical spectroscopy in the visible range. Our results suggest that oligomerization partakes in regulation of the OCP photocycle, with different oligomers slowing down the overall thermal recovery of the dark-adapted state of OCP. They furthermore reveal that upon non-photoproductive excitation a numbed state forms, which remains in a non-photoexcitable structural state for at least ≈0.5 µs after absorption of a first photon.

Rational Control of Off-State Heterogeneity in a Photoswitchable Fluorescent Protein Provides Switching Contrast Enhancement.

Reversibly photoswitchable fluorescent proteins are essential markers for advanced biological imaging, and optimization of their photophysical properties underlies improved performance and novel applications. Here we establish a link between photoswitching contrast, one of the key parameters that dictate the achievable resolution in nanoscopy applications, and chromophore conformation in the non-fluorescent state of rsEGFP2, a widely employed label in REversible Saturable OpticaL Fluorescence Transitions (RESOLFT) microscopy. Upon illumination, the cis chromophore of rsEGFP2 isomerizes to two distinct off-state conformations, trans1 and trans2, located on either side of the V151 side chain. Reducing or enlarging the side chain at this position (V151A and V151L variants) leads to single off-state conformations that exhibit higher and lower switching contrast, respectively, compared to the rsEGFP2 parent. The combination of structural information obtained by serial femtosecond crystallography with high-level quantum chemical calculations and with spectroscopic and photophysical data determined in vitro suggests that the changes in switching contrast arise from blue- and red-shifts of the absorption bands associated to trans1 and trans2, respectively. Thus, due to elimination of trans2, the V151A variants of rsEGFP2 and its superfolding variant rsFolder2 display a more than two-fold higher switching contrast than their respective parent proteins, both in vitro and in E. coli cells. The application of the rsFolder2-V151A variant is demonstrated in RESOLFT nanoscopy. Our study rationalizes the connection between structural and photophysical chromophore properties and suggests a means to rationally improve fluorescent proteins for nanoscopy applications.

Selective population of triplet excited states in heavy-atom-free BODIPY-C60 based molecular assemblies.

Photophysical studies on a BODIPY-fullerene-distyryl BODIPY triad (BDP-C60-DSBDP) and its reference dyads (BODIPY-fullerene; BDP-C60 and distyryl BODIPY-fullerene; DSBDP-C60) are presented herein. In the triad, the association of the two chromophore units linked by a fullerene moiety leads to strong near UV-Visible light absorption from 300 to 700 nm. The triplet-excited state was observed upon visible excitation in all these assemblies, and shown to be localized on the C60 or BODIPY moieties. Using quantitative nanosecond transient absorption, we provide a complete investigation on the lifetime and formation quantum yield of the triplet-excited state. In the BDP-C60 dyad, the triplet excited state of C60 (τ = 7 ± 1 µs) was obtained with a quantum yield of 40 ± 8%. For the DSBDP-C60 dyad and BDP-C60-DSBDP triad, a longer-lived triplet excited state with a lifetime of around 250 ± 20 µs centered on the DSBDP moiety was formed, with respective quantum yields of 37 ± 8 and 20 ± 4%. Triplet-triplet annihilation up-conversion is characterized in the BDP-C60 dyad and the bichromophoric triad in the presence of perylene and DSBDP-monomer as respective annihilators. The photo-induced formation of a long-lived 3DSBDP* in the triad coupled with panchromatic light absorption offers potential applications as a heavy-atom-free organic triplet photosensitizer.

Multivariate Curve Resolution Slicing of Multiexponential Time-Resolved Spectroscopy Fluorescence Data.

Time-resolved fluorescence spectroscopy (TRFS), i.e., measurement of fluorescence decay curves for different excitation and/or emission wavelengths, provides specific and sensitive local information on molecules and on their environment. However, TRFS relies on multiexponential data fitting to derive fluorescence lifetimes from the measured decay curves and the time resolution of the technique is limited by the instrumental response function (IRF). We propose here a multivariate curve resolution (MCR) approach based on data slicing to perform tailored and fit-free analysis of multiexponential fluorescence decay curves. MCR slicing, taking as a basic framework the multivariate curve resolution-alternating least-squares (MCR-ALS) soft-modeling algorithm, relies on a hybrid bilinear/trilinear data decomposition. A key feature of the method is that it enables the recovery of individual components characterized by decay profiles that are only partially describable by monoexponential functions. For TRFS data, not only pure multiexponential tail information but also shorter time delay information can be decomposed, where the signal deviates from the ideal exponential behavior due to the limited time resolution. The accuracy of the proposed approach is validated by analyzing mixtures of three commercial dyes and characterizing the mixture composition, lifetimes, and associated contributions, even in situations where only ternary mixture samples are available. MCR slicing is also applied to the analysis of TRFS data obtained on a photoswitchable fluorescent protein (rsEGFP2). Three fluorescence lifetimes are extracted, along with the profile of the IRF, highlighting that decomposition of complex systems, for which individual isomers are characterized by different exponential decays, can also be achieved.

Study of conformational transitions of i-motif DNA using time-resolved fluorescence and multivariate analysis methods.

Recently, the presence of i-motif structures at C-rich sequences in human cells and their regulatory functions have been demonstrated. Despite numerous steady-state studies on i-motif at neutral and slightly acidic pH, the number and nature of conformation of this biological structure are still controversial. In this work, the fluorescence lifetime of labelled molecular beacon i-motif-forming DNA sequences at different pH values is studied. The influence of the nature of bases at the lateral loops and the presence of a Watson-Crick-stabilized hairpin are studied by means of time-correlated single-photon counting technique. This allows characterizing the existence of several conformers for which the fluorophore has lifetimes ranging from picosecond to nanosecond. The information on the existence of different i-motif structures at different pH values has been obtained by the combination of classical global decay fitting of fluorescence traces, which provides lifetimes associated with the events defined by the decay of each sequence and multivariate analysis, such as principal component analysis or multivariate curve resolution based on alternating least squares. Multivariate analysis, which is seldom used for this kind of data, was crucial to explore similarities and differences of behaviour amongst the different DNA sequences and to model the presence and identity of the conformations involved in the pH range of interest. The results point that, for i-motif, the intrachain contact formation and its dissociation show lifetimes ten times faster than for the open form of DNA sequences. They also highlight that the presence of more than one i-motif species for certain DNA sequences according to the length of the sequence and the composition of the bases in the lateral loop.

Photoactive Organic/Inorganic Hybrid Materials with Nanosegregated Donor-Acceptor Arrays.

The synthesis of the first mesogenic donor-acceptor polyoxometalate (POM)-based hybrid is herein described. The structural and electronic properties of the hybrid compound were evaluated through combination of small- and wide-angle X-ray scattering, optical microscopy, electrochemistry and photoluminescence. In the solid state, the compound behaves as a birefringent solid, displaying a lamellar organization in which double-layers of POMs and bis(thiophene)thienothiophene organic donors alternate regularly. Noticeably, the sub-unit organizations in the composite are similar to that observed for the individual POM and organic donor precursors. Photophysical studies show that in the hybrid, the fluorescence of the organic donor unit is considerably quenched both in solution and in the solid state, which is attributed to occurrence of intramolecular charge-separated state.

Mechanistic Insights into the Triplet Sensitized Photochromism of Diarylethenes.

Operating photoswitchable molecules repetitively and reliably is crucial for most of their applications, in particular in (opto)electronic devices, and related to reversibility and fatigue resistance, which both critically depend on the photoisomerization mechanism defined by the substitution pattern. Two diarylethene photoswitches bearing biacetyl triplet sensitizers either at the periphery or at the core were investigated using both stationary as well as transient UV/Vis absorption spectroscopy ranging from the femtosecond to the microsecond time scale. The diarylethene with two biacetyl moieties at the periphery is switching predominantly from the triplet excited state, giving rise to an enhanced fatigue resistance. In contrast, the diarylethene bearing one diketone at the photoreactive inner carbon atom cyclizes from the singlet excited state and shows significantly higher quantum yields for both cyclization and cycloreversion.

Control of the Photo-Isomerization Mechanism in 3H-Naphthopyrans to Prevent Formation of Unwanted Long-Lived Photoproducts.

In the photochromic reactions of 3H-naphthopyrans, two colored isomers TC (transoid-cis) and TT (transoid-trans) are formed. In terms of optimized photo-switchable materials, synthetic efforts are nowadays evolving toward developing 3H-naphthopyran derivatives that would not be able to photoproduce the long-living transoid-trans, TT, photoproduct. The substitution with a methoxy group at position 10 results in significant reduction of the TT isomer formation yield. The TC photophysics responsible for TT suppression were revealed here using a combination of multi-scale time resolved absorption UV-vis spectroscopy and ab initio calculations. The substitution changes the TC excited-state potential energy landscape, the bicycle-pedal isomerization path is favored over the rotation around a single double bond. The bicycle-pedal path is aborted in halfway to TT formation due to S1→S0 internal conversion populating back the TC species in the ground electronic state. This is validated by a shorter TC S1 state lifetime for methoxy derivative in comparison to that of the parent-unsubstituted compound (0.47 ± 0.05 ps vs. 0.87 ± 0.09 ps) in cyclohexane.

Photochromic Reaction by Red Light via Triplet Fusion Upconversion.

Red or near-infrared (NIR) light responsive molecules have received much attention for biological and material applications because potentially harmful UV light for materials and cells is not required for the photochemical reactions. Although some molecular designs for photochromic molecules to increase the photosensitivity to red or NIR light have been reported, the strategies are limited to the extension of π-conjugation length and the utilization of charge transfer transition or energy and electron transfers. Triplet fusion is an attractive tool to cause chemical reactions by converting low-energy excitation light to high-energy upconversion light. However, the efficient use of the high energy of upconversion light is difficult because almost all reported triplet fusion systems rely on reabsorption of upconversion light. Here, we demonstrated red-light-driven photochromism via the triplet fusion of a phenoxyl-imidazolyl radical complex, Pery-RPIC, that has a covalently bonded perylene as an annihilator unit. The femtosecond time-resolved absorption and fluorescence spectroscopy revealed that this photochromic reaction proceeds by the highly efficient singlet energy transfer from the annihilator unit to the photochromic unit. This strategy can be applied not only to the development of visible and NIR light responsive photochromic system but also to various photochemical reactions.

Importance of the Mixing and High-Temperature Heating Steps in the Controlled Thermal Coprecipitation Synthesis of Sub-5-nm Na(Gd-Yb)F4:Tm.

In order to achieve a significant size reduction to get ultrasmall upconverting nanoparticles (UCNPs) following a thermal coprecipitation pathway, we identified two critical points: the UCNP precursor mixing and high-temperature heating steps. Significant differences could be observed according to the way the inorganic sodium and fluoride sources were mixed to the rare-earth oleate before the high-temperature heating step. More interestingly, accurate monitoring of the high-temperature heating step using microwave (MW) dielectric heating yielded major improvement toward ultrasmall UCNPs. Thus, hexagonal, Tm-doped sub-5-nm UCNPs with an unusual Na(Yb-Gd)F4 matrix with 53% Yb were produced, displaying satisfactory luminescence. Noticeably, MW heating was achieved in a weakly MW-absorbing oleic acid (OA)/octadecene mixture, and the influence of the OA content composition on the MW heating efficiency is discussed in this report.

Cobalt(II) Pentaaza-Macrocyclic Schiff Base Complex as Catalyst for Light-Driven Hydrogen Evolution in Water: Electrochemical Generation and Theoretical Investigation of the One-Electron Reduced Species.

We previously reported that the tetraazamacrocyclic Schiff base complex [CoIII(CR14)(X)2]n+ (CR14 = 2,12-dimethyl-3,7,11,17-tetraazabicyclo[11.3.1]heptadeca-1(17),2,11,13,15-pentaene, X = Cl (n = 1) (1-Cl2) or H2O (n = 3) (1-(H2O)2)) is a very efficient H2-evolving catalyst (HEC) in fully aqueous solutions at pH 4.0-4.5 when used in a photocatalytic system including a photosensitizer and ascorbate as sacrificial electron donor. The excellent H2-evolving activity of this complex, compared to other cobalt and rhodium catalysts studied in the same photocatalytic conditions, can be related to the high stability of its two-electron reduced form, the putative "Co(I)" state. These very interesting results led us to investigate the H2-evolving performances of a series of compounds from a close-related family, the pentaaza-macrocyclic cobalt [CoII(CR15)(H2O)2]Cl2 complex (2, CR15 = 2,13-dimethyl-3,6,9,12,18-pentaazabicyclo[12.3.1]octadeca-1(18),2,12,14,16-pentaene), which comprises a larger macrocycle with five nitrogen atoms instead of four. Electrochemical as well as spectroscopic investigations in CH3CN coupled to density functional theory (DFT) calculations point to decoordination of one of the amine upon reduction of Co(II) to the low-valent "Co(I)" form. The resulting unchelated amine could potentially act as a proton relay promoting the H2 formation via proton-coupled-electron transfer (PCET) reactions. Besides, the iron, manganese, and zinc analogues, [FeII(CR15)(X)2]n+ (X = Cl (n = 0) or H2O (n = 2)) (3), [MnII(CR15)(CH3CN)2](PF6)2 (4), and {[ZnII(CR15)Cl](PF6)}n (5) were also synthesized and investigated. The photocatalytic activity of 2-5 toward proton reduction was then evaluated in a tricomponent system containing the [RuII(bpy)3]Cl2 photosensitizer and ascorbate, in fully aqueous solution. The photocatalytic activity of 2 was also compared with that of 1 in the same experimental conditions. It was found that the number of catalytic cycles versus catalyst for 2 are slightly lower than that for 1, suggesting that if the amine released upon reduction of 2 plays a role in promoting the H2-evolving catalytic activity, other factors balance this effect. Finally, photophysical and nanosecond transient absorption spectroscopies were used to investigate the photocatalytic system.

Study of light-induced formation of photodimers in the i-motif nucleic acid structure by rapid-scan FTIR difference spectroscopy and hybrid hard- and soft-modelling.

The i-motif is a DNA structure formed by cytosine-rich sequences, very relevant from a biochemical point of view and potentially useful in nanotechnology as pH-sensitive nanodevices or nanomotors. To provide a different view on the structural changes and dynamics of direct excitation processes involving i-motif structures, the use of rapid-scan FTIR spectroscopy is proposed. Hybrid hard- and soft-modelling based on the Multivariate Curve Resolution by Alternating Least Squares (MCR-ALS) algorithm has been used for the resolution of rapid-scan FTIR spectra and the interpretation of the photochemically induced time-dependent conformational changes of i-motif structures. The hybrid hard- and soft-modelling version of MCR-ALS (HS-MCR), which allows the introduction of kinetic models to describe process behavior, provides also rate constants associated with the transitions modeled. The results show that UV irradiation does not produce degradation of the studied sequences but induces the formation of photodimers. The presence of these affect much more the stability of i-motif structures formed by short sequences than that of those formed by longer sequences containing additional structural stabilizing elements, such as hairpins.

Ultrafast charge transfer excited state dynamics in trifluoromethyl-substituted iridium(iii) complexes.

Time-resolved spectroscopy was exploited to gain new insights into the nature and dynamics of charge transfer excited states of bis-cyclometalated Ir(iii) complexes. We showed that its dynamics is strongly influenced by the nature of the diimine ligand due to the existence of a ligand-ligand charge transfer process in the picosecond timescale. All the results are supported by DFT/TD-DFT calculations and spectroelectrochemistry.

Frame-Insensitive Expression Cloning of Fluorescent Protein from Scolionema suvaense.

Expression cloning from cDNA is an important technique for acquiring genes encoding novel fluorescent proteins. However, the probability of in-frame cDNA insertion following the first start codon of the vector is normally only 1/3, which is a cause of low cloning efficiency. To overcome this issue, we developed a new expression plasmid vector, pRSET-TriEX, in which transcriptional slippage was induced by introducing a DNA sequence of (dT)14 next to the first start codon of pRSET. The effectiveness of frame-insensitive cloning was validated by inserting the gene encoding eGFP with all three possible frames to the vector. After transformation with one of these plasmids, E. coli cells expressed eGFP with no significant difference in the expression level. The pRSET-TriEX vector was then used for expression cloning of a novel fluorescent protein from Scolionema suvaense. We screened 3658 E. coli colonies transformed with pRSET-TriEX containing Scolionema suvaense cDNA, and found one colony expressing a novel green fluorescent protein, ScSuFP. The highest score in protein sequence similarity was 42% with the chain c of multi-domain green fluorescent protein like protein "ember" from Anthoathecata sp. Variations in the N- and/or C-terminal sequence of ScSuFP compared to other fluorescent proteins indicate that the expression cloning, rather than the sequence similarity-based methods, was crucial for acquiring the gene encoding ScSuFP. The absorption maximum was at 498 nm, with an extinction efficiency of 1.17 × 105 M-1·cm-1. The emission maximum was at 511 nm and the fluorescence quantum yield was determined to be 0.6. Pseudo-native gel electrophoresis showed that the protein forms obligatory homodimers.

AIE phenomena of a cyanostilbene derivative as a probe of molecular assembly processes.

The initial processes of the crystallization of a solute molecule, 1-cyano-trans-1,2-bis-(4'-methylbiphenyl)-ethylene (CN-MBE) in binary solution (water and acetone), were investigated by means of fluorescence spectroscopy as well as scanning electron microscopy (SEM). With an increase in the volume fraction (Vw) of the poor solvent (water) in the solution, a drastic change in the fluorescence spectra and intensity of CN-MBE was observed. This change was attributed to aggregation induced emission (AIE). By analyzing the evolution of AIE by multivariate curve resolution-alternating least squares (MCR-ALS), it was revealed that four main species appeared in the solution depending on the Vw values. On the basis of molecular exciton theory, we assigned these four emissive states to the monomer, H-dimer, J-dimer, and H-aggregates. Interestingly, the J-dimer state was observed only in a Vw range of 40% to 50%, just before the formation of the aggregate. This result suggests that the J-dimer plays an important role as the precursor for larger aggregates leading to crystal formation. By integrating the present results with previous work on the crystallization of CN-MBA through solvent evaporation, we discussed the dynamics of the crystallization from the viewpoint of the sequence of molecular species appearing in the aggregation in solution.

Electrolyte containing lithium cation in squaraine-sensitized solar cells: interactions and consequences for performance and charge transfer dynamics.

By optimizing the lithium concentration in an electrolyte to 50 mmol L-1 and the dye-to-chenodeoxycholic acid ratio in a VG1-based dye solution, we achieved 4.7% power conversion efficiency under standard AM 1.5G conditions. In addition to this performance, we herein discuss the role played by lithium in the electrolyte and its interplay in the charge transfer processes from ms to fs dynamics. Based on electrochemical impedance spectroscopy, photoluminescence and pump-probe transient absorption spectroscopy, we conclude that although lithium increases the electron diffusion length, this has no satisfactory impact on electron injection and even slows dye regeneration. This study provides evidence that lithium is not only specifically adsorbed on the surface of TiO2 but prompts a molecular reorganization of the self-assembled dye monolayer, forming harmful H-aggregates.

Synthesis, Characterization, and Photocatalytic H2-Evolving Activity of a Family of [Co(N4Py)(X)](n+) Complexes in Aqueous Solution.

A series of [Co(III)(N4Py)(X)](ClO4)n (X = Cl(-), Br(-), OH(-), N3(-), NCS(-)-κN, n = 2: X = OH2, NCMe, DMSO-κO, n = 3) complexes containing the tetrapyridyl N5 ligand N4Py (N4Py = 1,1-di(pyridin-2-yl)-N,N-bis(pyridin-2-ylmethyl)methanamine) has been prepared and fully characterized by infrared (IR), UV-visible, and NMR spectroscopies, high-resolution electrospray ionization mass spectrometry (HRESI-MS), elemental analysis, X-ray crystallography, and electrochemistry. The reduced Co(II) and Co(I) species of these complexes have been also generated by bulk electrolyses in MeCN and characterized by UV-visible and EPR spectroscopies. All tested complexes are catalysts for the photocatalytic production of H2 from water at pH 4.0 in the presence of ascorbic acid/ascorbate, using [Ru(bpy)3](2+) as a photosensitizer, and all display similar H2-evolving activities. Detailed mechanistic studies show that while the complexes retain the monodentate X ligand upon electrochemical reduction to Co(II) species in MeCN solution, in aqueous solution, upon reduction by ascorbate (photocatalytic conditions), [Co(II)(N4Py)(HA)](+) is formed in all cases and is the precursor to the Co(I) species which presumably reacts with a proton. These results are in accordance with the fact that the H2-evolving activity does not depend on the chemical nature of the monodentate ligand and differ from those previously reported for similar complexes. The catalytic activity of this series of complexes in terms of turnover number versus catalyst (TONCat) was also found to be dependent on the catalyst concentration, with the highest value of 230 TONCat at 5 × 10(-6) M. As revealed by nanosecond transient absorption spectroscopy measurements, the first electron-transfer steps of the photocatalytic mechanism involve a reductive quenching of the excited state of [Ru(bpy)3](2+) by ascorbate followed by an electron transfer from [Ru(II)(bpy)2(bpy(•-))](+) to the [Co(II)(N4Py)(HA)](+) catalyst. The reduced catalyst then enters into the H2-evolution cycle.

Mapping pixel dissimilarity in wide-field super-resolution fluorescence microscopy.

Recent advances in fluorescence bioimaging with single-molecule sensitivity have relied on the analysis and visualization of single-molecule data obtained on smart fluorophores. We describe an alternative method to enhance the information content of densely labeled fluorescence images. Visualization is improved by representing pixels as the dissimilarities of the fluctuations of the fluorescence signals, with the dissimilarity being taken to the mean of the signals over all the pixels. Mapping pixel dissimilarity (Mappix) results in signal and information enhancement of the output images. In addition, the spatial distribution of the fluorescence brightness of the original image is not skewed. This allows large differences of molecular brightness to be handled which turns out to be critical to the fidelity of the final image. In this work, we provide testing of the Mappix approach with both simulated and real data. The results obtained on HEK cells expressing Dronpa photoswitchable fluorescent protein show that, for densely labeled samples, improvement can be obtained on fluorescence images allowing the observation of structural information. Despite some limitations, comparison to state of art methods reveals that Mappix can be very useful for biological imaging applications.