Prospective Randomized Controlled Trial to Study the Effect of Local Steroids in the Retropharyngeal Space After Anterior Cervical Discectomy and Fusion.

STUDY DESIGN: Prospective randomized controlled trial. OBJECTIVE: To study the effect of local steroids in the retropharyngeal space after anterior cervical discectomy and fusion (ACDF) in reducing prevertebral soft-tissue swelling (PSTS) and complications associated with it. METHODS: A total of 50 consecutive patients operated with ACDF were double-blinded randomized into 2 groups: steroids (25) and control (25). Triamcinolone in collagen sponge was used in the steroid group and normal saline in gelatin sponge in the control group. Patients' lateral radiographs were taken on the immediate postoperative day; days 2, 4, and 6; at 2 weeks; and 2 and 6 months postoperatively. The PSTS ratio at C3 to C7 and PSTS index were calculated. Patients were clinically evaluated using the Visual Analogue Scale (VAS) score for odynophagia and radiating pain, modified Japanese Orthopedic Association Score (mJOA), and Neck Disability Index (NDI). RESULTS: PSTS showed a significant reduction in the steroid group as compared with the control group on the immediate postoperative day; days 2, 4, and 6; and at 2 weeks. However, at 2 and 6 months, PSTS remained the same. VAS score for odynophagia also showed a significant difference between the 2 groups on the immediate postoperative day; days 2, 4, and 6; and 2 weeks postoperatively, with no significant difference at the 2- and 6-month follow-up. mJOA and NDI showed no significant difference between the 2 groups at the 2- and 6-month follow-up. CONCLUSION: Use of retropharyngeal steroids helps in reducing the postoperative odynophagia on a short-term basis without any complication.

Posterior Cervical Interbody Fusion - Single-Stage Approach of Anterior Reconstruction and Posterior Stabilization: A Case Report and Review of Literature.

The success and popularity of the transforaminal approach in the lumbar spine have been made possible by the routine use of pedicle screws in the lumbar spine. Transforaminal approach in the cervical spine can give access to the disc and the vertebral body anteriorly and avoid an additional anterior approach in certain clinical situations. A case of cervical spine trauma was managed by this approach. Technical details and difficulties faced were analyzed in this article. Transforaminal approach in the lower cervical spine, though has a learning curve, seems to be a feasible technique along with the use of cervical pedicle screws. The safety and reproducibility of the approach need to be substantiated with a larger study. Further, this procedure can avoid additional anterior surgery in certain situations in the cervical spine.

Anatomic Considerations of Anterior Transarticular Screw Fixation for Atlantoaxial Instability.

STUDY DESIGN: Cadaveric, observational study. PURPOSE: Atlantoaxial instability (AAI) is characterized by excessive movement at the C1-C2 junction between the atlas and axis. An anterior surgical approach to expose the upper cervical spine for internal fixation and bone grafting has been developed to fix AAI. Currently, no anatomic information exists on the anterior transarticular atlantoaxial screw or screw and plate fixation between C1 and C2 in the Indian population. The objective of this study is to assess the anatomic landmarks of C1-C2 vertebrae: entry point, trajectory, screw length, and safety of the procedure. OVERVIEW OF LITERATURE: Methods outlined by Magerl and Harms are the optimal approaches among the dorsal techniques. Contraindications for these techniques include aberrant location of vertebral arteries, fractures of C1-C2 posterior structures. In these cases, anterior transarticular fixation is an alternative. Several available screw insertion trajectories have been reported. Biomechanical studies have demonstrated that adequate rigidity of this fixation is comparable with posterior fusion techniques. METHODS: Direct measurements using Vernier calipers and a goniometer were recorded from 30 embalmed human cadavers. The primary parameters measured were the minimum and maximum lateral and posterior angulations of the screw in the sagittal and coronal planes, respectively, and optimum screw length, if it was placed accurately. RESULTS: The posterior and lateral angles of screw placement in the coronal and sagittal planes ranged from 16° to 30° (mean±standard deviation [SD], 23.93°±3.93°) and 8° to 17° (mean±SD, 13.3°±2.26°), respectively. The optimum screw length was 25-38 mm (mean±SD, 28.76±3.69 mm). CONCLUSIONS: If the screw was inserted without lateral angulation, the spinal canal or cord could be violated. If a longer screw was inserted with greater posterior angulation, the vertebral artery at the posterior or posterolateral aspect of the C1 superior facet could be violated. Thus, 26° and 30° of lateral and posterior angulations, respectively, are the maximum angles permissible to avoid injury of the vertebral artery and violations of the spinal canal or atlanto-occipital joint.

Anterior Release and Anterior Reconstruction for a Neglected Osteoporotic Odontoid Fracture.

A 70 years old lady presented to us with history of a fall 3 months prior. She had suffered a type 2 odontoid fracture with atlantoaxial dislocation, that was not reducible by traction. She had symptoms of neck pain with inability to hold the neck upright. The patient was subsequently planned for anterior release and reduction of odontoid fracture dislocation with posterior stabilization in the same sitting. The patient was treated with cervical skeletal traction and immobilized. However, she developed occipital sore during the period and was mobilized with brace after which she developed myelopathic symptoms and gait disturbance due to the collapse of fracture segment. The patient was planned for anterior release and fixation with contoured reconstruction plate fixing C1 lateral mass to the lateral mass on the right side and C1 lateral mass to C2 body on the left side primarily with distraction of the C1-C2 joint by autologous tricortical iliac bone graft. The posterior stabilization was planned after healing of the sore, and the patient was counseled for the same. However, the patient was lost on follow-up and returned at 3-month postoperative period with collapse of the graft, resubluxation of C1-C2 segment, and failure of anterior fixation. The standard modality of treatment for such cases includes an anterior release of contracted soft tissues and ligaments and posterior stabilization with fusion in a single setting. However, it is the posterior fixation that stabilizes the fracture and prevents it from redislocation. Anterior fixation as a stand-alone treatment in osteoporotic bone has high risks of failure due to severe posterior tensile stresses. This article describes the importance of posterior fixation in osteoporotic bone based on our experience.

A Rare Case of Traumatic Lateral Translationof Lumbosacral Spine with Nerve Root Avulsion.

INTRODUCTION: Traumatic lumbar spondylolisthesis, though a rare lesion, is frequently noted in patients with multiple traumatic injuries sustained in a high-velocity trauma like a road traffic accident. CASE REPORT: Here, we report a case of traumatic Biplanar translational injury at L5-S1 level with neurological deficit in a 22-year male with motor vehicle accident. Open reduction, decompression, and fusion with rigid fixation were achieved and spine alignment was restored, but the neurological recovery remained uncertain. CONCLUSION: These are highly unstable injuries with complete disruption of posterior ligamentous integrity, requiring careful reduction and thorough decompression and stable but rigid posterior fixation and fusion.

Cadaveric study for ideal dorsal pedicle screw entry point.

OBJECTIVE: To determine the entry for the dorsal pedicular screw in relation to the notch present at the junction of base of the lateral margin of superior articular process with superior border of transverse process in dorsal spine. The advantage of this technique is a constant and easily identifiable entry point which does not involve partial resection of the inferior facet, thus maintaining stability and maintaining the well defined transverse and sagittal screw angles and decreasing the incidence of medial and inferior pedicle violation. MATERIALS AND METHODS: The study was carried out using ten cadavers (four male and six female). Spinal column was dissected completely from cadavers. Before the experiment, normal anatomy was confirmed on all cadavers excluding cases of spinal deformity. Dissection was done by the spine surgeons taking care to preserve all the bony landmarks near the entry point. This study was carried out bilaterally on pedicles between the first and twelfth thoracic (T) vertebrae. RESULTS: The relation of the superior articular notch and transverse process to the thoracic spine pedicles was studied. It was found that superior third of the pedicle was related to the superior articular notch and the transverse process in the first five thoracic vertebrae. The relation of these structures to the pedicle of the sixth thoracic vertebra was somewhat equally distributed between the superior and middle third of the pedicle. From the 7th to 12th thoracic vertebrae the superior articular process and transverse process were related to the middle third of the pedicle in almost all the cases. It is important to note that the inferior 1/3rd of the pedicle was not related to these landmarks at any of the levels. CONCLUSION: We conclude that the ideal pedicle entry point described here should be considered by surgeons during thoracic pedicle screw instrumentation. The notch at the base of the superior articular process will always remain constant and therefore an important anatomical landmark in guiding the screw toward the entry of the pedicle.

Functional Results of Communited Intra-articular Distal Humerus Fractures Treated with Bicolumnar Plating.

INTRODUCTION: Communited intra-articular distal humerus fractures are commonly encountered in orthopaedic practice and they are present with unique difficulties for internal fixation. This problem is especially worse in the elderly due to osteoporotic bone. AIM: To evaluate the intermediate term results (minimum follow up of two years) of communited intra-articular distal humerus fractures treated with bicolumnar plating with or without olecranon osteotomy in elderly Indian population. MATERIALS AND METHODS: Sixty three consecutive patients operated with bicolumnar plating for communited intra-articular distal humerus fractures at the tertiary care centre were identified in the time period between 2009 and 2013. All patients had an age more than 60 years at the time of surgery. A minimum follow up of two years post surgery was a mandatory criteria. The Disabilities of Arm and Shoulder and Hand (DASH) score and the Mayo Elbow Performance (MEP) score calculated along with complete range of motion. RESULTS: The mean follow-up was 38 months. All patients achieved fracture union with mean MEP and DASH scores being 85 ± 15.5 and 21.4 ± 4.9 respectively. These scores although poor were comparable to the opposite side (90 and 12.2 respectively). Also the mean supination-pronation arc and flexion-extension arc was 156 degrees and 105 degrees respectively. This is well within the functional range of elbow. The mean block to extension was at 15 degrees with a mean maximal flexion of 120 degrees. CONCLUSION: Our study conclusively establishes that excellent functional outcome can be achieved with open reduction and internal fixation in Type C distal humerus fractures in elderly including the ones that are communited. Total elbow arthroplasty although a viable option, gives similar results to a well done internal fixation with added cost.