Materials descriptors for advanced water dissociation catalysts in bipolar membranes.

The voltage penalty driving water dissociation (WD) at high current density is a major obstacle in the commercialization of bipolar membrane (BPM) technology for energy devices. Here we show that three materials descriptors, that is, electrical conductivity, microscopic surface area and (nominal) surface-hydroxyl coverage, effectively control the kinetics of WD in BPMs. Using these descriptors and optimizing mass loading, we design new earth-abundant WD catalysts based on nanoparticle SnO2 synthesized at low temperature with high conductivity and hydroxyl coverage. These catalysts exhibit exceptional performance in a BPM electrolyser with low WD overvoltage (ηwd) of 100 ± 20 mV at 1.0 A cm-2. The new catalyst works equivalently well with hydrocarbon proton-exchange layers as it does with fluorocarbon-based Nafion, thus providing pathways to commercializing advanced BPMs for a broad array of electrolysis, fuel-cell and electrodialysis applications.

Anion-Specific Water Interactions with Nanochitin: Donnan and Osmotic Pressure Effects as Revealed by Quartz Microgravimetry.

The development of new materials emphasizes greater use of sustainable and eco-friendly resources, including those that take advantage of the unique properties of nanopolysaccharides. Advances in this area, however, necessarily require a thorough understanding of interactions with water. Our contribution to this important topic pertains to the swelling behavior of partially deacetylated nanochitin (NCh), which has been studied here by quartz crystal microgravimetry. Ultrathin films of NCh supported on gold-coated resonators have been equilibrated in aqueous electrolyte solutions (containing NaF, NaCl, NaBr, NaNO3, Na2SO4, Na2SO3, or Na3PO4) at different ionic strengths. As anticipated, NCh displays contrasting swelling/deswelling responses, depending on the ionic affinities and valences of the counterions. The extent of water uptake induced by halide anions, for instance, follows a modified Hofmeister series with F- producing the highest swelling. In marked contrast, Cl- induces film dehydration. We conclude that larger anions promote deswelling such that water losses increase with increasing anion valence. Results such as the ones reported here are critical to ongoing efforts designed to dry chitin nanomaterials and develop bio-based and sustainable materials, including particles, films, coatings, and other nanostructured assemblies, for various devices and applications.

Morphological Studies of Solution-Crystallized Thermoplastic Elastomers with Polyethylene Endblocks and a Random-Copolymer Midblock.

Styrenic thermoplastic elastomers (TPEs) in the form of triblock copolymers possessing glassy endblocks and a rubbery midblock account for the largest global market of TPEs worldwide, and typically rely on microphase separation of the endblocks and the subsequent formation of rigid microdomains to ensure satisfactory network stabilization. In this study, the morphological characteristics of a relatively new family of crystallizable TPEs that instead consist of polyethylene endblocks and a random-copolymer midblock composed of styrene and (ethylene-co-butylene) moieties are investigated. Copolymer solutions prepared at logarithmic concentrations in a slightly endblock-selective solvent are subjected to crystallization under different time and temperature conditions to ascertain if copolymer self-assembly is directed by endblock crystallization or vice versa. According to transmission electron microscopy, semicrystalline aggregates develop at the lowest solution concentration examined (0.01 wt%), and the size and population of crystals, which dominate the copolymer morphologies, are observed to increase with increasing aging time. Real-space results are correlated with small- and wide-angle X-ray scattering to elucidate the concurrent roles of endblock crystallization and self-assembly of these unique TPEs in solution.

Quantitative Calorimetric Studies of the Chiral Nematic Mesophase in Aqueous Cellulose Nanocrystal Suspensions.

Aqueous suspensions of cellulose nanocrystals (CNCs) can spontaneously form a chiral nematic mesophase at a critical concentration (c*). Unfortunately, no current analytical technique permits rapid detection of c*. Herein, we introduce a facile and accurate approach to assess c* rapidly (<2 h) from a small sample volume and compare our results with those obtained by conventional methods. Our strategy employs isothermal titration calorimetry (ITC) to measure the heat associated with interactions in the suspension, which can identify the onset of mesophase formation as the heat signature is sensitive to the suspension viscosity and thus capable of detecting small changes in the suspension environment. We measure c* for CNC samples differing in surface charge and aspect ratio, and find that both lower aspect ratios and higher surface charges increase c*. Our ITC results reveal the role of CNC interactions prior to the visual observation of mesophase formation and elucidate mesomorphic effects related to nanocrystals and their suspensions.

Shear-Dependent Structures of Flocculated Micro/Nanofibrillated Cellulose (MNFC) in Aqueous Suspensions.

Cellulosic nanomaterials constitute a topic of growing commercial interest for numerous applications, many of which demand a working knowledge of the rheology of the materials. We demonstrate here that aqueous suspensions of micro/nanofibrillated cellulose (MNFC) exhibit complex shear behavior governed primarily by fibrillar floc dynamics. Regimes corresponding to structure formation, persistence, and breakdown are quantitatively differentiated. We assess the recovery of the network structure as a function of the applied breakdown conditions and identify critical conditions that characterize the floc dynamics as isotropic or anisotropic. A two-step yield behavior generates persistent anisotropic flocs that effectively prohibit recovery of the initial gel structure under certain conditions. Processing within this stress window entails a risk of generating heterogeneous, potentially irreproducible structures and properties. An in-depth understanding of the rheology of aqueous MNFC suspensions and their floc-dominated, rather than fibril-dominated, nature is critical to rationally tailoring properties through judicious selection of processing conditions.

Network topology and stability of homologous multiblock copolymer physical gels.

The mechanical properties of physical gels generated by selectively swelling a homologous series of linear multiblock copolymers are investigated by quasistatic uniaxial tensile tests. We use the slip-tube network model to extract the contributions arising from network crosslinks and chain entanglements. The composition dependence of these contributions is established and considered in terms of simulations that identify the probabilities associated with chain conformations. Dynamic rheology provides additional insight into the characteristics and thermal stability of the molecular networks.

Self-Assembly of a Midblock-Sulfonated Pentablock Copolymer in Mixed Organic Solvents: A Combined SAXS and SANS Analysis.

Ionic, and specifically sulfonated, block copolymers are continually gaining interest in the soft materials community due to their unique suitability in various ion-exchange applications such as fuel cells, organic photovoltaics, and desalination membranes. One unresolved challenge inherent to these materials is solvent templating, that is, the translation of self-assembled solution structures into nonequilibrium solid film morphologies. Recently, the use of mixed polar/nonpolar organic solvents has been examined in an effort to elucidate and control the solution self-assembly of sulfonated block copolymers. The current study sheds new light on micellar assemblies (i.e., those with the sulfonated blocks comprising the micellar core) of a midblock-sulfonated pentablock copolymer in polar/nonpolar solvent mixtures by combining small-angle X-ray and small-angle neutron scattering. Our scattering data reveal that micelle size depends strongly on overall solvent composition: micelle cores and coronae grow as the fraction of nonpolar solvent is increased. Universal model fits further indicate that an unexpectedly high fraction of the micelle cores is occupied by polar solvent (60-80 vol %) and that partitioning of the polar solvent into micelle cores becomes more pronounced as its overall quantity decreases. This solvent presence in the micelle cores explains the simultaneous core/corona growth, which is otherwise counterintuitive. Our findings provide a potential pathway for the formation of solvent-templated films with more interconnected morphologies due to the greatly solvated micellar cores in solution, thereby enhancing the molecular, ion, and electron-transport properties of the resultant films.

Dielectric and Resistive Heating of Polymeric Media: Toward Remote Thermal Activation of Stimuli-Responsive Soft Materials.

Stimuli-responsive soft materials are becoming increasingly important in a wide range of contemporary technologies, and methods by which to promote thermal stimulation remotely are of considerable interest for controllable device deployment, particularly in inaccessible environments such as outer space. Until now, remote thermal stimulation of responsive polymers has relied extensively on the use of nanocomposites wherein embedded nanoparticles/structures are selectively targeted for heating purposes. In this study, an alternative remote-heating mechanism demonstrates that the dielectric and resistive thermal losses introduced upon application of an alternating current generate sufficient heat to raise the temperature of a neat polyimide by over 70 °C within ≈10 s. Thermal imaging is used here to measure current-induced temperature changes of polymeric media, and a proposed analytical model yields predictions that compare reasonably well with experimental data, confirming that such remote heating is viable. Conditions permitting a shape-memory polymer possessing a melting transition and susceptible to dielectric actuation to achieve continuous electrostrain-temperature cycling are identified.

Swelling and Free-Volume Characteristics of TEMPO-Oxidized Cellulose Nanofibril Films.

Cellulose nanofibrils (CNFs) are becoming increasingly ubiquitous in diverse technologies requiring sustainable nanoscale species to form or modify films. The objective of the present study is to investigate the swelling behavior and accompanying free volume of self-standing TEMPO-oxidized (TO) CNF films in the presence of water vapor. For this purpose, we have performed time-resolved swelling experiments on films, prepared according to different experimental protocols, at 90% relative humidity (RH) and ambient temperature. Corresponding free-volume characteristics are elucidated by positron annihilation lifetime spectroscopy (PALS) conducted at ambient temperature and several RH levels. Increasing the drying temperature of the films (from ambient to 50 °C) is observed to promote an increase in film density, which serves to reduce bulk swelling. These elevated drying temperatures likewise cause the free-volume pore size measured by PALS to decrease, while the corresponding total free-volume fraction remains nearly constant. Similarly, dispersion of TO-CNF into aqueous suspensions by ultrasonication prior to film formation increases both the total free-volume fraction and pore size but reduces the size of individual nanofibrils with little net change in bulk swelling. The swelling and concurrent free-volume measurements reported here generally reveal an increase in the free volume of TO-CNF films with increasing RH.

Incorporation of Metallic Species into Midblock-Sulfonated Block Ionomers.

Block ionomers can, in the same fashion as their neutral block copolymer analogs, microphase-order into various nanoscale morphologies. The added benefit of a copolymer possessing a charged species is that the resultant block ionomer becomes amphiphilic and capable of imbibing polar liquids, including water. This characteristic facilitates incorporation of metallic species into the soft nanostructure for a wide range of target applications. In this study, the nonpolar and polar constituents of solvent-templated midblock-sulfonated block ionomers (SBIs) are first selectively metallated for complementary morphological analysis. Next, four different salts, with cationic charges ranging from +1 to +3, are introduced into three hydrated SBIs varying in their degree of sulfonation (DOS), and cation uptake is measured as a function of immersion time. These results indicate that uptake generally increases with increasing salt concentration, cationic charge, and specimen DOS. Swelling and nanoindentation measurements conducted at ambient temperature demonstrate that water uptake decreases, while the surface modulus increases, with increasing cationic charge. Chemical spectra acquired from energy-dispersive X-ray spectroscopy (EDS) confirm the presence of each of the ion-exchanged species, and corresponding EDS chemical maps reveal that the spatial distribution of these species is relatively uniform throughout the block ionomer films.

Communication: Molecular-level description of constrained chain topologies in multiblock copolymer gel networks.

Network characteristics in physical gels composed of solvated block copolymers varying in molecular design are examined here by dynamic rheology and computer simulations. In two triblock copolymer series, one with chain length (N) varied at constant copolymer composition (f) and the other with f varied at constant N, we discern the dependence of equilibrium network metrics on both N and f. Increasing the block number in a linear multiblock series at constant N and f escalates conformational complexity, which dominates network connectivity classified according to a midblock conformation index.

Nanoscale considerations responsible for diverse macroscopic phase behavior in monosubstituted isobutyl-POSS/poly(ethylene oxide) blends.

Nanocomposites prepared by incorporating functionalized polyhedral oligomeric silsesquioxane (POSS) into polymer matrices afford a wide range of versatile hybrid materials for use in technologies ranging from cosmetics and pharmaceuticals to sensors and batteries. Here, we investigate the phase behavior of nanocomposites composed of poly(ethylene oxide) (PEO) and monosubstituted isobutyl POSS (iPOSS) modified with different functional moieties. Microscopic analyses of blends containing these iPOSS variants reveal the existence of different macroscopic morphologies and surface topologies. In the presence of octa-iPOSS, a POSS-rich surface cell motif reminiscent of breath patterns develops, whereas addition of allyl-iPOSS promotes the formation of surface plates. While aminopropyl-iPOSS forms dispersed aggregates, maleamic acid-iPOSS disperses in PEO with little effect on PEO crystal morphology. We perform rotational isomeric state Monte Carlo simulations to discern the effect of monosubstitution on the interaction energy between iPOSS and PEO, and establish the molecular-level origin for these observed differences in phase behavior.

Adhesion and friction in polymer films on solid substrates: conformal sites analysis and corresponding surface measurements.

In this work, we present a statistical mechanical analysis to elucidate the molecular-level factors responsible for the static and dynamic properties of polymer films. This analysis, which we term conformal sites theory, establishes that three dimensionless parameters play important roles in determining differences from bulk behavior for thin polymer films near to surfaces: a microscopic wetting parameter, αwx, defined as the ratio of polymer-substrate interaction to polymer-polymer interaction; a dimensionless film thickness, H*; and dimensionless temperature, T*. The parameter αwx introduced here provides a more fundamental measure of wetting than previous metrics, since it is defined in terms of intermolecular forces and the atomic structure of the substrate, and so is valid at the nanoscale for gas, liquid or solid films. To test this theoretical analysis, we also report atomic force microscopy measurements of the friction coefficient (µ), adhesion force (FA) and glass transition temperature (Tg) for thin films of two polymers, poly(methyl methacrylate) (PMMA) and polystyrene (PS), on two planar substrates, graphite and silica. Both the friction coefficient and the glass transition temperature are found to increase as the film thickness decreases, and this increase is more pronounced for the graphite than for the silica surface. The adhesion force is also greater for the graphite surface. The larger effects encountered for the graphite surface are attributed to the fact that the microscopic wetting parameter, αwx, is larger for graphite than for silica, indicating stronger attraction of polymer chains to the graphite surface.

Bicomponent Block Copolymers Derived from One or More Random Copolymers as an Alternative Route to Controllable Phase Behavior.

Block copolymers have been extensively studied due to their ability to spontaneously self-organize into a wide variety of morphologies that are valuable in energy-, medical-, and conservation-related (nano)technologies. While the phase behavior of bicomponent diblock and triblock copolymers is conventionally governed by temperature and individual block masses, it is demonstrated here that their phase behavior can alternatively be controlled through the use of blocks with random monomer sequencing. Block random copolymers (BRCs), i.e., diblock copolymers wherein one or both blocks are a random copolymer comprised of A and B repeat units, have been synthesized, and their phase behavior, expressed in terms of the order-disorder transition (ODT), has been investigated. The results establish that, depending on the block composition contrast and molecular weight, BRCs can microphase-separate. We also report that large variation in incompatibility can be generated at relatively constant molecular weight and temperature with these new soft materials. This sequence-controlled synthetic strategy is extended to thermoplastic elastomeric triblock copolymers differing in chemistry and possessing a random-copolymer midblock.

Hydrothermal Conditioning of Physical Hydrogels Prepared from a Midblock-Sulfonated Multiblock Copolymer.

Since nanostructured amphiphilic macromolecules capable of affording high ion and water transport are becoming increasingly important in a wide range of contemporary energy and environmental technologies, the swelling kinetics and temperature dependence of water uptake are investigated in a series of midblock-sulfonated thermoplastic elastomers. Upon self-assembly, these materials maintain a stable hydrogel network in the presence of a polar liquid. In this study, real-time water-sorption kinetics in copolymer films prepared by different casting solvents are elucidated by synchrotron small-angle X-ray scattering and gravimetric measurements, which directly correlate nanostructural changes with macroscopic swelling to establish fundamental structure-property behavior. By monitoring the equilibrium swelling capacity of these materials over a range of temperatures, an unexpected transition in the vicinity of 50 °C has been discovered. Depending on copolymer morphology and degree of sulfonation, hydrothermal conditioning of specimens to temperatures above this transition permits retention of superabsorbent swelling at ambient temperature.

Physical Microfabrication of Shape-Memory Polymer Systems via Bicomponent Fiber Spinning.

As emerging technologies continue to require diverse materials capable of exhibiting tunable stimuli-responsiveness, shape-memory materials are of considerable significance because they can change size and/or shape in controllable fashion upon environmental stimulation. Of particular interest, shape-memory polymers (SMPs) have secured a central role in the ongoing development of relatively lightweight and remotely deployable devices that can be further designed with specific surface properties. In the case of thermally-activated SMPs, two functional chemical species must be present to provide (i) an elastic network capable of restoring the SMP to a previous strain state and (ii) switching elements that either lock-in or release a temporary strain at a well-defined thermal transition. While these species are chemically combined into a single macromolecule in most commercially available SMPs, this work establishes that, even though they are physically separated across one or more polymer/polymer interfaces, their shape-memory properties are retained in melt-spun bicomponent fibers. In the present study, we investigate the effects of fiber composition and cross-sectional geometry on both conventional and cold-draw shape memory, and report surprisingly high levels of strain fixity and recovery that generally improve upon strain cycling.

Morphological investigation of midblock-sulfonated block ionomers prepared from solvents differing in polarity.

Recent developments regarding charged multiblock copolymers that can form physical networks and exhibit robust mechanical properties herald new and exciting opportunities for contemporary technologies requiring amphiphilic attributes. Due to the presence of strong interactions, however, control over the phase behavior of such materials remains challenging, especially since their morphologies can be solvent-templated. In this study, transmission electron microscopy and microtomography are employed to examine the morphological characteristics of midblock-sulfonated pentablock ionomers prepared from solvents differing in polarity. Resultant images confirm that discrete, spherical ion-rich microdomains form in films cast from a relatively nonpolar solvent, whereas an apparently mixed morphology with a continuous ion-rich pathway is generated when the casting solvent is more highly polar. Detailed 3D analysis of the morphological characteristics confirms the coexistence of hexagonally-packed nonpolar cylinders and lamellae, which facilitates the diffusion of ions and/or other polar species through the nanostructured medium.

Evolution of homopolymer thin-film instability on surface-anchored diblock copolymers varying in composition.

The stability of molecularly thin polymer films deposited on various material substrates is of critical importance to many contemporary nanotechnologies involving functional coatings and nano/micropatterned surfaces, in which case the causes responsible for film destabilization must be fully understood. Previous experimental studies report that factors such as film thickness and polymer molecular weight play significant roles in governing the rate, as well as mechanism, of destabilization. Complementary theoretical predictions reveal that surface heterogeneities can likewise induce (and regulate the process of) destabilization. In this study, we investigate the destabilization rate and mechanism of homopolystyrene (PS) films differing in thickness on top of poly(styrene-b-methyl methacrylate) (SM) diblock copolymer monolayers varying in chemical composition anchored to flat silica-like substrates to examine the effect of surface constitution on PS stability. Copolymers with a long M block consistently promote PS dewetting by nucleation and growth, wherein the linear dewetting rate decreases monotonically with increasing PS molecular weight, film thickness, and S fraction in the SM copolymer. In analogous studies involving a copolymer with a relatively short M block, however, PS dewetting proceeds instead by spinodal dewetting that evolves gradually into nucleation and growth as the film thickness is increased.

Dissipative particle dynamics of triblock copolymer melts: a midblock conformational study at moderate segregation.

As thermoplastic elastomers, triblock copolymers constitute an immensely important class of shape-memory soft materials due to their unique ability to form molecular networks stabilized by physical, rather than chemical, cross-links. The extent to which such networks develop in triblock and higher-order multiblock copolymers is sensitive to the formation of midblock bridges, which serve to connect neighboring microdomains. In addition to bridges, copolymer molecules can likewise form loops and dangling ends upon microphase separation or they can remain unsegregated. While prior theoretical and simulation studies have elucidated the midblock bridging fraction in triblock copolymer melts, most have only considered strongly segregated systems wherein dangling ends and unsegregated chains become relatively insignificant. In this study, simulations based on dissipative particle dynamics are performed to examine the self-assembly and networkability of moderately segregated triblock copolymers. Utilizing a density-based cluster-recognition algorithm, we demonstrate how the simulations can be analyzed to extract information about microdomain formation and permit explicit quantitation of the midblock bridging, looping, dangling, and unsegregated fractions for linear triblock copolymers varying in chain length, molecular composition, and segregation level. We show that midblock conformations can be sensitive to variations in chain length, molecular composition, and bead repulsion, and that a systematic investigation can be used to identify the onset of strong segregation where the presence of dangling and unsegregated fractions are minimal. In addition, because this clustering approach is robust, it can be used with any particle-based simulation method to quantify network formation of different morphologies for a wide range of triblock and higher-order multiblock copolymer systems.

Communication: Molecular-level insights into asymmetric triblock copolymers: network and phase development.

Molecularly asymmetric triblock copolymers progressively grown from a parent diblock copolymer can be used to elucidate the phase and property transformation from diblock to network-forming triblock copolymer. In this study, we use several theoretical formalisms and simulation methods to examine the molecular-level characteristics accompanying this transformation, and show that reported macroscopic-level transitions correspond to the onset of an equilibrium network. Midblock conformational fractions and copolymer morphologies are provided as functions of copolymer composition and temperature.