Your browser doesn't support javascript.
loading
Mostrar: 20 | 50 | 100
Resultados 1 - 9 de 9
Filtrar
1.
Indian J Microbiol ; 62(1): 70-78, 2022 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-35068606

RESUMO

Spent petroleum catalyst as a repository of several toxic metals is recommended for metal removal before safe disposal. To evaluate an effective biotechnological approach for metal removal, a comparative study between sequential-aerobic and sequential-anaerobic bioleaching processes was conducted for the removal of metals from crushed-acetone-pretreated spent petroleum catalyst. The SEM-EDX and XPS analysis confirmed the presence of Ni, Al, Mo and V in their oxidic and sulphidic forms in spent catalyst. The bioleaching experiments were performed in stirred tank batch reactors (2.5 L), temperature 30 °C, pH 1.4 and stirring speed 250 rpm for the period of 160 h. Sulfuric acid acted as lechant for both sequential-aerobic (Acidithiobacillus ferrooxidans oxidised sulfur to sulfuric acid aerobically) and sequential-anaerobic (Acidithiobacillus ferrooxidans oxidised sulphur to sulfuric acid coupled with the ferric reduction to ferrous anaerobically) bioleaching studies. The higher Ni and V extractions compared to Al and Mo for all the studies were due to increased solubility of Ni and V, and supported by XPS which showed marginal signs of Ni and V peaks in leach residues compared to feed spent catalyst. At the end (320 h), sequential-aerobic bioleaching was resulted to 99% Ni, 65% Al, 90% Mo and 99% V extraction quite more effective than sequential-anaerobic bioleaching (88% Ni, 28% Al, 33% Mo and 77% V) and sequential-control leaching (94% Ni, 20% Al, 40% Mo and 57% V). Although anaerobic bioleaching a possible approach, aerobic condition was found to be more suitable for sulfuric acid generation by A. ferrooxidans and high yield. So aerobic bioleaching is recommended to be favourable approach compared to anaerobic counterpart for future study and extrapolation. SUPPLEMENTARY INFORMATION: The online version contains supplementary material available at 10.1007/s12088-021-00978-8.

2.
J Environ Manage ; 242: 372-383, 2019 Jul 15.
Artigo em Inglês | MEDLINE | ID: mdl-31059950

RESUMO

The feasibility of column bioleaching in the recovery of valuable metals (Ni, V, Mo, and Al) from an uncrushed petroleum refinery spent hydroprocessing catalyst using Acidithiobacillus thiooxidans has been reported. Different operational strategies such as submerged bioleaching in continuous mode, submerged bioleaching in resting period mode, free flow bioleaching in continuous mode, and free flow bioleaching in resting period mode were tested to find out the optimum bioleaching strategy for the recovery of metals from spent hydroprocessing catalyst. Among various operational modifications, submerged bioleaching in continuous mode was considered as the best strategy in which about 82.9% of Ni, 33.4% of Al, and 22.7% of Mo were leached after 315 h of column operation. The maximum yield of V (53.6%) in this column was achieved in 105 h, after which, a rapid decrease in its yield was observed, possibly due to its precipitation. The field emission scanning electron microscopy (FESEM) analysis revealed the presence of V in precipitates. The modified kinetic models showed that the leaching of Al, V and Mo followed the chemical control model, whereas the dissolution of Ni was controlled by diffusion control reaction. The bacterial attachment study with FESEM indicated that the metal toxicity was induced on bacterial cells attached to the sulfur particles. The results of the current study indicate that column bioleaching of spent hydroprocessing catalyst is effective in leaching of Ni and V, whereas leaching of Al and Mo require further treatments.


Assuntos
Acidithiobacillus , Petróleo , Acidithiobacillus thiooxidans , Catálise , Metais , Enxofre
3.
Artigo em Inglês | MEDLINE | ID: mdl-30663503

RESUMO

A study to compare biogas production potentials of wheat straw, sugarcane bagasse and pressmud was conducted at pH 8.0, temperature 40 °C and substrate concentration 20 g/L. Raw substrates were thermogravimetrically and Fourier-transform infrared spectroscopically characterised. TGA showed the weight loss of samples attributable to moisture, hemicellulose, cellulose and lignin losses. FTIR analysis indicated functional groups characteristics of hemicellulose, cellulose and lignin. Biogas production was the maximum between 10th and 25th day for all the tests. WS with 10% inoculum showed the highest cumulative biogas production of 370 mL/g followed by the SB (316 mL/g) and PM (211 mL/g) counterparts. The corresponding values with 5% inoculum were 303 mL/g (WS), 244 mL/g (SB) and 152 mL/g (PM). The inoculum volume also positively affected the cumulative biogas production (22.1, 29.5 and 38.8% respectively). The higher volatile fatty acids as observed in case of WS which further facilitated higher biogas production could be due to its maximum volatile solids content (88.9%) and water swelling capacity (7.37). A consistently increasing trend in the methane content (varying between 54 and 61%) in all the tests was observed till the 20th day. The biogas (7.7-21.7 mL/g) and the methane (35-42%) contents showed a decreasing trend thereafter, the lowest being observed during the 35-40-day period.


Assuntos
Biocombustíveis/análise , Celulose/química , Metano/análise , Caules de Planta/química , Saccharum/química , Triticum/química , Anaerobiose , Ácidos Graxos Voláteis/análise , Lignina/química , Polissacarídeos/química
4.
Artigo em Inglês | MEDLINE | ID: mdl-25320861

RESUMO

A central composite design (CCD) combined with response surface methodology (RSM) was employed for maximizing bioleaching yields of metals (Al, Mo, Ni, and V) from as-received spent refinery catalyst using Acidithiobacillus thiooxidans. Three independent variables, namely initial pH, sulfur concentration, and pulp density were investigated. The pH was found to be the most influential parameter with leaching yields of metals varying inversely with pH. Analysis of variance (ANOVA) of the quadratic model indicated that the predicted values were in good agreement with experimental data. Under optimized conditions of 1.0% pulp density, 1.5% sulfur and pH 1.5, about 93% Ni, 44% Al, 34% Mo, and 94% V was leached from the spent refinery catalyst. Among all the metals, V had the highest maximum rate of leaching (Vmax) according to the Michaelis-Menten equation. The results of the study suggested that two-step bioleaching is efficient in leaching of metals from spent refinery catalyst. Moreover, the process can be conducted with as received spent refinery catalyst, thus making the process cost effective for large-scale applications.


Assuntos
Acidithiobacillus thiooxidans/metabolismo , Recuperação e Remediação Ambiental/métodos , Resíduos Industriais/análise , Petróleo/análise , Biodegradação Ambiental , Concentração de Íons de Hidrogênio , Metais/química , Enxofre/análise
5.
Artigo em Inglês | MEDLINE | ID: mdl-24679088

RESUMO

The present work investigated the leaching potential of moderately thermophilic bacteria in the recovery of metals from spent petroleum catalyst of varying particle sizes. The batch bioleaching experiments were conducted by employing a mixed consortium of moderate thermophilic bacteria at 45°C and by using five different particle sizes (from 45 to >2000 µm) of acetone-washed spent catalyst. The elemental mapping by FESEM confirmed the presence of Al, Ni, V and Mo along with sulfur in the spent catalyst. During bioleaching, Ni (92-97%) and V (81-91%) were leached in higher concentrations, whereas leaching yields of Al (23-38%) were found to be lowest in all particle sizes investigated. Decreasing the particle size from >2000 µm to 45-106 µm caused an increase in leaching yields of metals during initial hours. However, the final metals leaching yields were almost independent of particle sizes of catalyst. Leaching kinetics was observed to follow the diffusion-controlled model showing the linearity more close than the chemical control. The results of the present study suggested that bioleaching using moderate thermophilic bacteria was highly effective in removing the metals from spent catalyst. Moreover, bioleaching can be conducted using spent catalyst of higher particle size (>2000 µm), thus saving the grinding cost and making process attractive for larger scale application.


Assuntos
Bactérias/metabolismo , Metais/isolamento & purificação , Tamanho da Partícula , Petróleo/metabolismo , Poluentes Químicos da Água/isolamento & purificação , Acetona , Catálise , Cinética , Metais/metabolismo , Modelos Químicos , Espectroscopia de Infravermelho com Transformada de Fourier , Enxofre/isolamento & purificação , Enxofre/metabolismo , Poluentes Químicos da Água/metabolismo
6.
Indian J Microbiol ; 53(1): 92-9, 2013 Mar.
Artigo em Inglês | MEDLINE | ID: mdl-24426084

RESUMO

Soil from a pulse cultivated farmers land of Odisha, India, have been subjected to incubation studies for 40 consecutive days, to establish the impact of various nitrogenous fertilizers and water filled pore space (WFPS) on green house gas emission (N2O & CH4). C2H2 inhibition technique was followed to have a comprehensive understanding about the individual contribution of nitrifiers and denitrifiers towards the emission of N2O. Nevertheless, low concentration of C2H2 (5 ml: flow rate 0.1 kg/cm(2)) is hypothesized to partially impede the metabolic pathways of denitrifying bacterial population, thus reducing the overall N2O emission rate. Different soil parameters of the experimental soil such as moisture, total organic carbon, ammonium content and nitrate-nitrogen contents were measured at regular intervals. Application of external N-sources under different WFPS conditions revealed the diverse role played by the indigenous soil microorganism towards green house gas emission. Isolation of heterotrophic microorganisms (Pseudomonas) from the soil samples, further supported the fact that denitrification might be prevailing during specific conditions thus contributing to N2O emission. Statistical analysis showed that WFPS was the most influential parameter affecting N2O formation in soil in absence of an inhibitor like C2H2.

7.
Artigo em Inglês | MEDLINE | ID: mdl-35895918

RESUMO

In recent times, environmental pollution has been an alarming concern. This is increasing day-in-and-day-out, especially in the Asia-Pacific region due to the increasing population, urbanization, industrialization and inappropriate waste management measures. Pollution abatement is the need of the hour to sustain the biosphere in general and the human life in particular. A range of physical, chemical and biological strategies are commonly employed to remove pollutants from the contained water, soil and air. Physical, chemical or physicochemical remediation processes are commonly employed owing to their high efficiency, stability, recyclable property and low procurement cost as compared to metals, inorganic and organic materials. Materials of the later type include biocomposites, thin films, modified (bio)polymers, nanoparticles, nanofilters, sorbent like activated charcoal, and carbon nanotubes and nanosensors. Remediation mechanism largely follows sorption, degradation, oxidation, reduction, catalytic conversion, detection and microbial toxicity principles. This review details the mechanisms of action by these various remediating entities, their successful applications in pollution abatement, drawbacks and future prospects.HighlightsEnvironmental remediation using metals, inorganic and organic materials are discussed extensively.Major remediating approaches, viz., physical, physicochemical and chemical are elaborated citing latest references.The significance of biocomposites, biopolymers, polymers, thin films, nanoparticles, nanofilters, nanosensors and sorbents in remediation are highlighted.Pollutant removal from water, air and soil has been precisely discussed.A note on drawbacks, improvement and future prospects of remediating agents is presented.


Assuntos
Poluentes Ambientais , Recuperação e Remediação Ambiental , Nanotubos de Carbono , Humanos , Metais , Polímeros , Solo , Água
8.
Front Bioeng Biotechnol ; 10: 780409, 2022.
Artigo em Inglês | MEDLINE | ID: mdl-35372299

RESUMO

The potential of cellulose nanocomposites in the new-generation super-performing nanomaterials is huge, primarily in medical and environment sectors, and secondarily in food, paper, and cosmetic sectors. Despite substantial illumination on the molecular aspects of cellulose synthesis, various process features, namely, cellular export of the nascent polysaccharide chain and arrangement of cellulose fibrils into a quasi-crystalline configuration, remain obscure. To unleash its full potential, current knowledge on nanocellulose dispersion and disintegration of the fibrillar network and the organic/polymer chemistry needs expansion. Bacterial cellulose biosynthesis mechanism for scaled-up production, namely, the kinetics, pathogenicity, production cost, and product quality/consistency remain poorly understood. The bottom-up bacterial cellulose synthesis approach makes it an interesting area for still wider and promising high-end applications, primarily due to the nanosynthesis mechanism involved and the purity of the cellulose. This study attempts to identify the knowledge gap and potential wider applications of bacterial cellulose and bacterial nanocellulose. This review also highlights the manufacture of bacterial cellulose through low-cost substrates, that is, mainly waste from brewing, agriculture, food, and sugar industries as well as textile, lignocellulosic biorefineries, and pulp mills.

9.
Sci Rep ; 9(1): 5968, 2019 04 12.
Artigo em Inglês | MEDLINE | ID: mdl-30979920

RESUMO

The current study analyzed and optimized the concentration of NaOH for alkaline pretreatment of kitchen refuse for biogas production. Also, the benefits of microwave assistance in enhanced biogasification of kitchen refuse were evaluated. The TS, VS and structural changes were compared using standard experimental techniques. Molecular dynamics was investigated for the molecular level changes leading to higher biogasification in NaOHmicrowave combined pretreatment. The methane and biogas yields were calculated to validate the benefits of microwave assistance in efficient biogasification. The NaOH-microwave combined pretreatment showed higher VS production. Microwave treatment degraded and removed lignin more efficiently. Molecular dynamics studies revealed the induction of configurational instability in lignin and cellulose molecules with variable temperatures. The methane and biogas production increased with 6% NaOH concentration, and decreased at higher NaOH concentration till 10%. Microwave assistance declined the required NaOH concentration further to 4%. Thus, as compared to 6% NaOH concentration required for an efficient pretreatment, the kitchen refuse was efficiently pretreated with 4% NaOH concentration when combined with a 30 min duration microwaving. The experimental and computational data provided a detailed analysis proposing an optimized, novel and promising method to pretreat kitchen refuse for efficient and enhanced biogas production.

SELEÇÃO DE REFERÊNCIAS
DETALHE DA PESQUISA