Enzymes as Biodevelopers for Nano- And Micropatterned Bicomponent Biopolymer Thin Films.

The creation of nano- and micropatterned polymer films is a crucial step for innumerous applications in science and technology. However, there are several problems associated with environmental aspects concerning the polymer synthesis itself, cross-linkers to induce the patterns as well as toxic solvents used for the preparation and even more important development of the films (e.g., chlorobenzene). In this paper, we present a facile method to produce micro- and nanopatterned biopolymer thin films using enzymes as so-called biodevelopers. Instead of synthetic polymers, naturally derived ones are employed, namely, poly-3-hydroxybutyrate and a cellulose derivative, which are dissolved in a common solvent in different ratios and subjected to spin coating. Consequently, the two biopolymers undergo microphase separation and different domain sizes are formed depending on the ratio of the biopolymers. The development step proceeds via addition of the appropriate enzyme (either PHB-depolymerase or cellulase), whereas one of the two biopolymers is selectively degraded, while the other one remains on the surface. In order to highlight the enzymatic development of the films, video AFM studies have been performed in real time to image the development process in situ as well as surface plasmon resonance spectroscopy to determine the kinetics. These studies may pave the way for the use of enzymes in patterning processes, particularly for materials intended to be used in a physiological environment.

Modification Pathways for Copoly(2-oxazoline)s Enabling Their Application as Antireflective Coatings in Photolithography.

Chromophore-functionalized copoly(2-oxazoline)s are successfully evaluated as bottom antireflective coatings (BARCs) in high-resolution photolithography. With respect to UV light sources used in photolithographic production routines, anthracene is chosen as a chromophore. For application as polymer in BARCs, the copolymer poly(2-ethyl-2-oxazolin)45 -stat-poly(2-dec-9'-enyl-2-oxazolin)20 -stat-poly(2-(3'-(1"-(anthracen-9-ylmethyl)-1",2",3"-triazol-4-yl)propyl)-2-oxazolin)35 can be synthesized by the Huisgen cycloaddition click reaction of the copolymer poly(2-ethyl-2-oxazolin)45 -stat-poly(2-dec-9'-enyl-2-oxazolin)20 -stat-poly(2-pent-4'-inyl-2-oxazolin)35 and the corresponding azide-functionalized anthracenes. These copolymers can be crosslinked by the thermally induced thiol-ene reaction involving the unsaturated C=C bonds of the poly(2-dec-9'-enyl-2-oxazoline) repetition units and a multifunctional thiol as crosslinker. Tests of this BARC in a clean room under production conditions reveal a significant decrease of the swing-curve of a chemically amplified positive photoresist by more than 50%, hence significantly increasing the resolution of the photoresist.

Archaeal production of polyhydroxyalkanoate (PHA) co- and terpolyesters from biodiesel industry-derived by-products.

The archaeon Haloferax mediterranei was selected for production of PHA co- and terpolyesters using inexpensive crude glycerol phase (CGP) from biodiesel production as carbon source. CGP was assessed by comparison with the application of pure glycerol. Applying pure glycerol, a copolyester with a molar fraction of 3-hydroxybutyrate (3HB) of 0.90 mol/mol and 3-hydroxyvalerate (3HV) of 0.10 mol/mol, was produced at a volumetric productivity of 0.12 g/Lh and an intracellular PHA content of 75.4 wt.-% in the sum of biomass protein plus PHA. Application of CGP resulted in the same polyester composition and volumetric productivity, indicating the feasibility of applying CGP as feedstock. Analysis of molar mass distribution revealed a weight average molar mass M w of 150 kDa and polydispersity P i of 2.1 for pure glycerol and 253 kDa and 2.7 for CGP, respectively; melting temperatures ranged between 130 and 140°C in both setups. Supplying γ -butyrolactone as 4-hydroxybutyrate (4HB) precursor resulted in a poly[(R)-3-hydroxybutyrate-co-(R)-3-hydroxyvalerate-co-4-hydroxybutyrate] (PHBHV4HB) terpolyester containing 3HV (0.12 mol/mol) and 4HB (0.05 mol/mol) in the poly[(R)-3-hydroxybutyrate] (PHB) matrix; in addition, this process runs without sterilization of the bioreactor. The terpolyester displayed reduced melting (melting endotherms at 122 and 137°C) and glass transition temperature (2.5°C), increased molar mass (391 kDa), and a polydispersity similar to the copolyesters.

Bio-Polyester/Rubber Compounds: Fabrication, Characterization, and Biodegradation.

Biobased and biodegradable polymers (BBDs) such as poly(3-hydroxy-butyrate), PHB, and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) are considered attractive alternatives to fossil-based plastic materials since they are more environmentally friendly. One major problem with these compounds is their high crystallinity and brittleness. In order to generate softer materials without using fossil-based plasticizers, the suitability of natural rubber (NR) as an impact modifier was investigated in PHBV blends. Mixtures with varying proportions of NR and PHBV were generated, and samples were prepared by mechanical mixing (roll mixer and/or internal mixer) and cured by radical C-C crosslinking. The obtained specimens were investigated with respect to their chemical and physical characteristics, applying a variety of different methods such as size exclusion chromatography, Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), thermal analysis, XRD, and mechanical testing. Our results clearly indicate that NR-PHBV blends exhibit excellent material characteristics including high elasticity and durability. Additionally, biodegradability was tested by applying heterologously produced and purified depolymerases. pH shift assays and morphology analyses of the surface of depolymerase-treated NR-PHBV through electron scanning microscopy confirmed the enzymatic degradation of PHBV. Altogether, we prove that NR is highly suitable to substitute fossil-based plasticizers; NR-PHBV blends are biodegradable and, hence, should be considered as interesting materials for a great number of applications.

Pilot-scale production of mcl-PHA by Pseudomonas citronellolis using acetic acid as the sole carbon source.

Medium-chain-length polyhydroxyalkanoates (mcl-PHA) are biobased materials with promising properties for environmentally friendly applications. Due to high production costs, which are related to the cost of the carbon sources combined with conversion insufficiencies, currently only small quantities are produced. This results in a lack of reliable data on properties and application potential for the variety of polymers from different types of production strains. This study investigated the potential for the production of mcl-PHA from volatile fatty acids (VFA) at a larger scale, given their potential as low-cost and sustainable raw material within a carboxylate-platform based biorefinery. Pseudomonas citronellolis (DSMZ 50332) was chosen as the production strain, and acetic acid was selected as the main carbon and energy source. Nitrogen was limited to trigger polymer production, and a fed-batch process using a pH-stat feeding regime with concentrated acid was established. We report successful production, extraction, and characterization of mcl PHA, obtaining a total of 1.76 kg from two 500-litre scale fermentations. The produced polymer was identified as a copolymer of 3-hydroxydecanoate (60.7%), 3-hydroxyoctanoate (37.3%), and 3-hydroxyhexanoate (2.0%) with a weight average molecular weight (Mw) of 536 kDa. NMR analysis indicates the presence of unsaturated side chains, which may offer additional possibilities for modification. The results confirm that there is a potential to produce significant amounts of mcl-PHA with interesting rubber-like properties from waste-derived VFA.

Nonradiative deactivation of europium(III) luminescence as a detection scheme for moisture.

The nonradiative deactivation of the excited state of europium(III)-based phosphors via OH-vibrations in the presence of water allows the detection of moisture in nitrogen at concentration levels down to at least 25 ppm (0.09% RH).

One decade of microwave-assisted polymerizations: quo vadis?

The application of microwave irradiation in polymer syntheses and modifications is of continuously growing interest and has received significant international interest since the beginning of the millennium. Preceded by a review that was published 6 years ago, the present paper summarizes the most recent trends in this research area. Radical as well as step-growth and ring-opening polymerizations will be addressed; furthermore, the evolution from microwave-assisted polymerizations to microwave-assisted material fabrication will be described on the examples of polymeranalogous reactions, polymer/metal composites and bio-based materials.

cis-Dichlorido(1,3-dimesitylimidazolidin-2-yl-idene)(2-formyl-benzyl-idene-κC,O)ruthenium diethyl ether solvate.

The title compound, [RuCl(2)(C(8)H(6)O)(C(21)H(26)N(2))]·C(4)H(10)O, contains a catalytically active ruthenium carbene complex of the 'second-generation Grubbs/Hoveyda' type with Ru in a square-pyramidal coordination, the apex of which is formed by the benzyl-idene carbene atom with Ru=C 1.827 (2) Å. The complex shows the uncommon cis, rather than the usual trans, arrangement of the two chloride ligands, with Ru-Cl bond lengths of 2.3548 (6) and 2.3600 (6) Å, and a Cl-Ru-Cl angle of 89.76 (2)°. This cis configuration is desirable for certain applications of ring-opening metathesis polymerization (ROMP) of strained cyclic olefins. The crystalline solid is a diethyl ether solvate, which is built up from a porous framework of Ru complexes held together by π-π stacking and C-H⋯Cl and C-H⋯O inter-actions. The disordered diethyl ether solvent mol-ecules are contained in two independent infinite channels, which extend parallel to the c axis at x,y = 0,0 and x,y = , and have solvent-accessible void volumes of 695 and 464 Å(3) per unit cell.

Characterization of polyhydroxyalkanoates produced by Synechocystis salina from digestate supernatant.

The current commercial production of polyhydroxyalkanoates (PHA) is based on heterotrophic bacteria, using organic carbon sources from crops. To avoid the competition with food and feed production, cyanobacteria, metabolising PHA from carbon dioxide can be used. This research focuses on the investigation of the thermal and rheological properties of PHA polymers accumulated by Synechocystis salina, which had been cultivated in digestate supernatant and a mineral medium. The dried bacterial cells had a polymer content of 5.5-6.6%. The relevance of the derived PHA polymers for the common melt polymer processing was correlated with their molecular mass distribution as well as with their thermal and rheological properties. The determined thermal and rheological properties showed that PHA polymers accumulated by S. salina on digestate supernatant or mineral medium are comparable with the commercial available poly(3-hydroxybutyrate). However, the results showed that PHA polymers in general require modification before melt processing to increase their stability in the molten state.

Nonspecific protein adsorption on cationically modified Lyocell fibers monitored by zeta potential measurements.

Nonspecific protein deposition on Lyocell fibers via a cationization step was explored by adsorption of two different N,N,N-trimethyl chitosan chlorides (TMCs). Both, the cationization and the subsequent protein deposition steps were performed and monitored in situ by evaluating the zeta potential using the streaming potential method. Both employed TMCs (degree of substitution with N+Me3Cl groups: 0.27 and 0.64) irreversibly adsorb on the fibers as proven by charge reversal (-12 to +7mV for both derivatives) after the final rinsing step. Onto these cationized fibers, BSA was deposited at different pH values (4, 5, and 7). Charge titrations revealed that close to the isoelectric point of BSA (4.7), BSA deposition was particularly favored, while at lower pH values (pH 4), hardly any adsorption took place due to electrostatic repulsion of the cationic fibers and the positively charged BSA. This work sets the foundation for further investigations to use zeta potential measurements for protein adsorption studies on fibrous materials.

The π-Electron Delocalization in 2-Oxazolines Revisited: Quantification and Comparison with Its Analogue in Esters.

The single crystal X-ray analysis of the ester-functionalized 2-oxazoline, methyl 3-(4,5-dihydrooxazol-2-yl)propanoate, revealed π-electron delocalization along the N-C-O segment in the 2-oxazoline pentacycle to significant extent, which is comparable to its counterpart along the O-C-O segment in the ester. Quantum chemical calculations based on the experimental X-ray geometry of the molecule supported the conjecture that the N-C-O segment has a delocalized electronic structure similar to an ester group. The calculated bond orders were 1.97 and 1.10 for the N=C and C-O bonds, and the computed partial charges for the nitrogen and oxygen atoms of -0.43 and -0.44 were almost identical. In the ester group, the bond orders were 1.94 and 1.18 for the C-O bonds, while the partial charges of the oxygen atom are -0.49 and -0.41, which demonstrates the similar electronic structure of the N-C-O and O-C-O segments. In 2-oxazolines, despite the higher electronegativity of the oxygen atom (compared to the nitrogen atom), the charges of the hetero atoms oxygen and nitrogen are equalized due to the delocalization, and it also means that a cationic attack on the nitrogen is possible, enabling regioselectivity during the initiation of the cationic ring-opening polymerization of 2-oxazoline monomers, which is a prerequisite for the synthesis of materials with well-defined structures.

Poly(2-oxazoline)-derived contact biocides: contributions to the understanding of antimicrobial activity.

A set of poly(2-oxazoline)-derived (co-)polymers was prepared by microwave-assisted polymerizations and acid-mediated hydrolysis and tested for antimicrobial activity in 50 × 50 × 2 mm PP compound plates containing 5 wt% of the polymers. Antimicrobial activity against gram-negative E. coli and P. aeruginosa as well as C. albicans depended only on the degree of hydrolysis, while antimicrobial activity against gram-positive S. aureus was only observed for hydrolyzed poly(2-nonyl-2-oxazoline)s. The surface energies of the compound plates compared to pure PP were hardly altered, and the compounds can be considered as alternatives for PP. The presence of the biocide additives at the surface of the PP compound plates could be shown by combined ATR-IR, zeta potential, and SEM-EDX measurements. Antimicrobial activity was maintained during double incubation as well as for lowered amounts of the biocide additive of 1% in PP compound plates.

Molecular fluorescent pH-probes based on 8-hydroxyquinoline.

Three 5,7-pi-extended 8-benzyloxyquinolines, namely 5,7-diphenyl-, 5,7-bis(biphenyl-4-yl)- and 5,7-bis(4-dibenzothiophenyl)-8-benzyloxyquinoline were prepared and investigated as fluorescent pH-probes in nonaqueous solution. Absorption and photoluminescence spectra of the introduced compounds also including the starting material 8-benzyloxy-5,7-dibromoquinoline as well as their N-protonated counterparts were recorded and the results were rationalized by quantum-chemical calculations. A pronounced red shift of the emission occurred upon protonation of the non halogenated derivatives, while the dibromo-derivative is hardly emissive and is virtually not protonated under the conditions used. The diphenyl- and the bis(biphenyl)-derivative especially show promising photoluminescence quantum yields both in the parent and the protonated state making them candidates for the active component in pH sensing applications.