Observing polymerization in 2D dynamic covalent polymers.

The quality of crystalline two-dimensional (2D) polymers1-6 is intimately related to the elusive polymerization and crystallization processes. Understanding the mechanism of such processes at the (sub)molecular level is crucial to improve predictive synthesis and to tailor material properties for applications in catalysis7-10 and (opto)electronics11,12, among others13-18. We characterize a model boroxine 2D dynamic covalent polymer, by using in situ scanning tunnelling microscopy, to unveil both qualitative and quantitative details of the nucleation-elongation processes in real time and under ambient conditions. Sequential data analysis enables observation of the amorphous-to-crystalline transition, the time-dependent evolution of nuclei, the existence of 'non-classical' crystallization pathways and, importantly, the experimental determination of essential crystallization parameters with excellent accuracy, including critical nucleus size, nucleation rate and growth rate. The experimental data have been further rationalized by atomistic computer models, which, taken together, provide a detailed picture of the dynamic on-surface polymerization process. Furthermore, we show how 2D crystal growth can be affected by abnormal grain growth. This finding provides support for the use of abnormal grain growth (a typical phenomenon in metallic and ceramic systems) to convert a polycrystalline structure into a single crystal in organic and 2D material systems.

A Crystalline 1D Dynamic Covalent Polymer.

The synthesis of crystalline one-dimensional polymers provides a fundamental understanding about the structure-property relationship in polymeric materials and allows the preparation of materials with enhanced thermal, mechanical, and conducting properties. However, the synthesis of crystalline one-dimensional polymers remains a challenge because polymers tend to adopt amorphous or semicrystalline phases. Herein, we report the synthesis of a crystalline one-dimensional polymer in solution by dynamic covalent chemistry. The structure of the polymer has been unambiguously confirmed by microcrystal electron diffraction that together with charge transport studies and theoretical calculations show how the π-stacked chains of the polymer generate optimal channels for charge transport.

An Expanded 2D Fused Aromatic Network with 90-Ring Hexagons.

Two-dimensional fused aromatic networks (2D FANs) have emerged as a highly versatile alternative to holey graphene. The synthesis of 2D FANs with increasingly larger lattice dimensions will enable new application perspectives. However, the synthesis of larger analogues is mostly limited by lack of appropriate monomers and methods. Herein, we describe the synthesis, characterisation and properties of an expanded 2D FAN with 90-ring hexagons, which exceed the largest 2D FAN lattices reported to date.

π-Interpenetrated 3D Covalent Organic Frameworks from Distorted Polycyclic Aromatic Hydrocarbons.

Three-dimensional covalent organic frameworks (3D COFs) with a pcu topology have been obtained from distorted polycyclic aromatic hydrocarbons acting as triangular antiprismatic (D3d ) nodes. Such 3D COFs are six-fold interpenetrated as the result of interframework π-stacking, which enable charge transport properties that are not expected for 3D COFs.

Electroactive Organic Building Blocks for the Chemical Design of Functional Porous Frameworks (MOFs and COFs) in Electronics.

Electroactive organic molecules have received a lot of attention in the field of electronics because of their fascinating electronic properties, easy functionalization and potential low cost towards their implementation in electronic devices. In recent years, electroactive organic molecules have also emerged as promising building blocks for the design and construction of crystalline porous frameworks such as metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs) for applications in electronics. Such porous materials present certain additional advantages such as, for example, an immense structural and functional versatility, combination of porosity with multiple electronic properties and the possibility of tuning their physical properties by post-synthetic modifications. In this Review, we summarize the main electroactive organic building blocks used in the past few years for the design and construction of functional porous materials (MOFs and COFs) for electronics with special emphasis on their electronic structure and function relationships. The different building blocks have been classified based on the electronic nature and main function of the resulting porous frameworks. The design and synthesis of novel electroactive organic molecules is encouraged towards the construction of functional porous frameworks exhibiting new functions and applications in electronics.

Clar Rules the Electronic Properties of 2D π-Conjugated Frameworks: Mind the Gap.

The key electronic properties of a family of 2D frameworks structurally convergent with holey graphenes were studied. The bandgap of these materials decreases monotonically with size, showing a common trend with anthracenes and kekulenes. This was rationalized by Clar's sextet rule, which reveals a direct relationship between the molecular systems and the 2D frameworks. In addition, a detailed benchmark against experimental data showcased the high quality of the models, which reproduce accurately available electronic properties. Overall, it was shown that DFT can be used to screen and understand the intrinsic bandgaps and electrochemistry potentials for technological applications prior to the synthesis of π-conjugated porous materials.

A Wavy Two-Dimensional Covalent Organic Framework from Core-Twisted Polycyclic Aromatic Hydrocarbons.

A high degree of crystallinity is an essential aspect in two-dimensional covalent organic frameworks, as many properties depend strongly on the structural arrangement of the different layers and their constituents. We introduce herein a new design strategy based on core-twisted polycyclic aromatic hydrocarbon as rigid nodes that give rise to a two-dimensional covalent organic framework with a wavy honeycomb (chairlike) lattice. The concave-convex self-complementarity of the wavy two-dimensional lattice guides the stacking of framework layers into a highly stable and ordered covalent organic framework that allows a full 3D analysis by transmission electron microscopy revealing its chairlike honeycomb facets and aligned mesoporous channels. Remarkably, the waviness of the framework does not disrupt the interlayer π-π stacking that shows charge transporting properties similar to those of planar covalent organic frameworks. The implementation of core-twisted aromatics as building blocks for covalent organic frameworks brings new possibilities in the design of highly ordered organic materials.

Hooking Together Sigmoidal Monomers into Supramolecular Polymers.

Supramolecular polymers show great potential in the development of new materials because of their inherent recyclability and their self-healing and stimuli-responsive properties. Supramolecular conductive polymers are generally obtained by the assembly of individual aromatic molecules into columnar arrays that provide an optimal channel for electronic transport. A new approach is reported to prepare supramolecular polymers by hooking together sigmoidal monomers into 1D arrays of π-stacked anthracene and acridine units, which gives rise to micrometer-sized fibrils that show pseudoconductivities in line with other conducting materials. This approach paves the way for the design of new supramolecular polymers constituted by acene derivatives with enhanced excitonic and electronic transporting properties.

Monodisperse N-Doped Graphene Nanoribbons Reaching 7.7 Nanometers in Length.

The properties of graphene nanoribbons are highly dependent on structural variables such as width, length, edge structure, and heteroatom doping. Therefore, atomic precision over all these variables is necessary for establishing their fundamental properties and exploring their potential applications. An iterative approach is presented that assembles a small and carefully designed molecular building block into monodisperse N-doped graphene nanoribbons with different lengths. To showcase this approach, the synthesis and characterisation of a series of nanoribbons constituted of 10, 20 and 30 conjugated linearly-fused rings (2.9, 5.3, and 7.7 nm in length, respectively) is presented.

ß-Cyclodextrin carbon nanotube-enhanced sensor for ciprofloxacin detection.

A simple and expedite electrochemical methodology was developed for the determination of ciprofloxacin, based on a glassy carbon (GC) electrode modified by a combination of multi-walled carbon nanotubes (MWCNT) with ß-cyclodextrin (ß-CD) incorporated in a polyaniline film. The combined use of ß-CD and MWCNT in the electrochemical sensor leads to a significant signal improvement. The ß-CD/MWCNT modified GC electrode exhibited efficient electrocatalytic behavior in the oxidation of ciprofloxacin with relatively high sensitivity, stability and lifetime. Molecular modeling studies showed that ciprofloxacin binds preferably to ß-CD rather than to CNT edges, leading to an improved sensitivity of the sensor. Under optimized conditions, a linear calibration curve was obtained for ciprofloxacin in the concentration range 10-80 µM with a detection limit of 50 nM. The analytical performance of this sensor was evaluated for the detection of ciprofloxacin in a wastewater treatment plant effluent.

Twisted Aromatic Frameworks: Readily Exfoliable and Solution-Processable Two-Dimensional Conjugated Microporous Polymers.

Twisted two-dimensional aromatic frameworks have been prepared by overcrowding the nodes with bulky and rigid substituents. The highly distorted aromatic framework with alternating out-of-plane substituents results in diminished interlayer interactions that favor the exfoliation and dispersion of individual layers in organic media.

Accuracy of dispersion interactions in semiempirical and molecular mechanics models: the benzene dimer case.

The benzene dimer is arguably the simplest molecular analogue of graphitic materials. We present the systematic study of minima and transition states of the benzene dimer with semiempirical and molecular mechanics (MM) methods. Full minimizations on all conformations were performed and the results, geometries, and binding energies were compared with CCSD(T) and DFT-D results. MM yields the best results with three force fields MM3, OPLS, and AMOEBA, which reproduced nine out of the ten stationary points of the benzene dimer. We obtained new parameters for MM3 and OPLS that successfully reproduce all structures of the benzene dimer and showed improved accuracy over DFT-D in most dimer geometries. Semiempirical models were, unexpectedly, less accurate than MM methods. The most accurate semiempirical method for the benzene dimer is PM6-DH2. DFT-D was the only Hamiltonian that reproduced the variations of energy with geometry from CCSD(T) calculations accurately and is the method of choice for energies of periodic and molecular calculations of graphitic systems. In contrast, MM represents an accurate alternative to calculate geometries.

Reentrant semiconducting behavior in polymerized fullerite structures with increasing sp3-carbon content.

The electronic behavior of polymerized fullerite structures, ranging from one-dimensional to three-dimensional polymers, was studied using density functional theory with the hybrid Heyd-Scuseria-Ernzerhof functional and a 6-31G(d,p) basis set. The bandgap across these structures decreases with the rise of sp3-carbon content until metallic behavior is observed. A further increase induces a reopening of the bandgap, revealing a reentrant semiconducting behavior in this class of materials. This behavior is understood in terms of the new electronic states originated by polymeric bonding and the effect of the volume reduction on the dispersion of sp2-states. This study highlights the fullerite polymers as a magnificent platform to tune electronic properties.

New parameterization scheme of DFT-D for graphitic materials.

A new parametrization scheme of DFT-D is proposed with the aim of devising a methodology for the study of graphitic material. The main feature of the new system is the geometry optimization within the fitting scheme. The DFT-D parameters are obtained for the benzene dimer, a good model molecule for graphitic systems. Very accurate CCSD(T) results are used as reference data for the benzene dimer, and the new method is shown to reproduce accurately its binding energies with small basis sets. After geometry optimization our new scheme performs better than the other methods. This approach generates proper geometries and accurate binding energies, even with small basis sets. We can expect this method to give similarly good results for larger graphitic systems.

2D Layered Bimetallic Phosphorous Trisulfides MI MIII P2 S6 (MI = Cu, Ag; MIII = Sc, V, Cr, In) for Electrochemical Energy Conversion.

Considerable improvements in the electrocatalytic activity of 2D metal phosphorous trichalcogenides (M2 P2 X6 ) have been achieved for water electrolysis, mostly with MII 2 [P2 X6 ]4- as catalysts for hydrogen evolution reaction (HER). Herein, MI MIII P2 S6 (MI  = Cu, Ag; MIII  = Sc, V, Cr, In) are synthesized and tested for the first time as electrocatalysts in alkaline media, towards oxygen reduction reaction (ORR) and HER. AgScP2 S6 follows a 4 e- pathway for the ORR at 0.74 V versus reversible hydrogen electrode; CuScP2 S6 is active for HER, exhibiting an overpotential of 407 mV and a Tafel slope of 90 mV dec-1 . Density functional theory models reveal that bulk AgScP2 S6 and CuScP2 S6 are both semiconductors with computed bandgaps of 2.42 and 2.23 eV, respectively and overall similar electronic properties. Besides composition, the largest difference in both materials is in their molecular structure, as Ag atoms sit at the midpoint of each layer alongside Sc atoms, while Cu atoms are raised to a similar height to S atoms, in the external segment of the 2D layers. This structural difference probably plays a fundamental role in the different catalytic performances of these materials. These findings show that MI (Cu, Ag) together with Sc(MIII ) leads to promising achievements in MI MIII P2 S6 materials as electrocatalysts.

Imaging and analysis of covalent organic framework crystallites on a carbon surface: a nanocrystalline scaly COF/nanotube hybrid.

Synthesis of covalent organic frameworks (COFs) is well-advanced but understanding their nanoscale structure and interaction with other materials remains a significant challenge. Here, we have developed a methodology for the detailed imaging and analysis of COF crystallites using carbon nanotube substrates for COF characterisation. Detailed investigation using powder X-ray diffraction, infrared spectroscopy, mass spectrometry and scanning electron microscopy in conjunction with a local probe method, transmission electron microscopy (TEM), revealed details of COF growth and nucleation at the nanoscale. A boronate ester COF undergoes preferential growth in the a-b crystallographic plane under solvothermal conditions. Carbon nanotubes were found to not impact the mode of COF growth, but the crystallites on nanotubes were smaller than COF crystallites not on supports. COF crystalline regions with sizes of tens of nanometres exhibited preferred orientation on nanotube surfaces, where the c-axis is oriented between 50 and 90° relative to the carbon surface. The COF/nanotube hybrid structure was found to be more complex than the previously suggested concentric core-shell model and can be better described as a nanocrystalline scaly COF/nanotube hybrid.

Understanding charge transport in wavy 2D covalent organic frameworks.

Understanding charge transport in 2D covalent organic frameworks is crucial to increase their performance. Herein a new wavy 2D covalent organic framework has been designed, synthesized and studied to shine light on the structural factors that dominate charge transport.

On the Origin of the Effect of pH in Oxygen Reduction Reaction for Nondoped and Edge-Type Quaternary N-Doped Metal-Free Carbon-Based Catalysts.

Metal-free carbon-based catalysts have gained much attention during the last 15 years as an alternative toward the replacement of platinum-based catalysts for the oxygen reduction reaction (ORR). However, carbon-based catalysts only show promising catalytic activity in alkaline solution. Concurrently, the most optimized polymer electrolyte membrane fuel cells use proton exchange membranes. This means that the cathode electrode is surrounded by a protonic environment in which carbon materials show poor performance, with differences above 0.5 V in EONSET for nondoped carbon materials. Therefore, the search for highly active carbon-based catalysts is only possible if we first understand the origin of the poor electrocatalytic activity of this kind of catalysts in acidic conditions. We address this matter through a combined experimental and modeling study, which yields fundamental principles on the origin of the pH effects in ORR for carbon-based materials. This is relevant for the design of pH-independent metal-free carbon-based catalysts.

Thiophene- and Carbazole-Substituted N-Methyl-Fulleropyrrolidine Acceptors in PffBT4T-2OD Based Solar Cells.

The impact of fullerene side chain functionalization with thiophene and carbazole groups on the device properties of bulk-heterojunction polymer:fullerene solar cells is discussed through a systematic investigation of material blends consisting of the conjugated polymer poly[(5,6-difluoro-2,1,3-benzothiadiazol-4,7-diyl)-alt-(3,3‴-di(2-octyldodecyl)-2,2';5',2″;5″,2‴-quaterthiophen-5,5‴-diyl)] (PffBT4T-2OD) as donor and C60 or C70 fulleropyrrolidines as acceptors. The photovoltaic performance clearly depended on the molecular structure of the fulleropyrrolidine substituents although no direct correlation with the surface morphology of the photoactive layer, as determined by atomic force microscopy, could be established. Although some fulleropyrrolidines possess favorable lowest unoccupied molecular orbital levels, when compared to the standard PC71BM, they originated OPV cells with inferior efficiencies than PC71BM-based reference cells. Fulleropyrrolidines based on C60 produced, in general, better devices than those based on C70, and we attribute this observation to the detrimental effect of the structural and energetic disorder that is present in the regioisomer mixtures of C70-based fullerenes, but absent in the C60-based fullerenes. These results provide new additional knowledge on the effect of the fullerene functionalization on the efficiency of organic solar cells.

PffBT4T-2OD Based Solar Cells with Aryl-Substituted N-Methyl-Fulleropyrrolidine Acceptors.

Novel C60 and C70 N-methyl-fulleropyrrolidine derivatives, containing both electron withdrawing and electron donating substituent groups, were synthesized by the well-known Prato reaction. The corresponding highest occupied molecular orbital (HOMO)/lowest unoccupied molecular orbital (LUMO) energy levels were determined by cyclic voltammetry, from the onset oxidation and reduction potentials, respectively. Some of the novel fullerenes have higher LUMO levels than the standards PC61BM and PC71BM. When tested in PffBT4T-2OD based polymer solar cells, with the standard architecture ITO/PEDOT:PSS/Active-Layer/Ca/Al, these fullerenes do not bring about any efficiency improvements compared to the standard PC71BM system, however they show how the electronic nature of the different substituents strongly affects the efficiency of the corresponding organic photovoltaic (OPV) devices. The functionalization of C70 yields a mixture of regioisomers and density functional theory (DFT) calculations show that these have systematically different electronic properties. This electronic inhomogeneity is likely responsible for the lower performance observed in devices containing C70 derivatives. These results help to understand how new fullerene acceptors can affect the performance of OPV devices.