Marine versus Continental Sources of Iodine and Selenium in Rainfall at Two European High-Altitude Locations.

The essential elements selenium (Se) and iodine (I) are often present in low levels in terrestrial diets, leading to potential deficiencies. Marine I and Se emissions and subsequent atmospheric wet deposition has been suggested to be an important source of I and Se to soils and terrestrial food chains. However, the contribution of recycled moisture of continental origin to I and Se to precipitation has never been analyzed. Here we report concentrations and speciation of I and Se, as well as of bromine (Br), sulfur (S), and DOC-δ13C signatures for weekly collected precipitation samples (in the period of April 2015 to September 2016) at two high altitude sites, i.e., Jungfraujoch (JFJ; Switzerland) and Pic du Midi (PDM; France). Analysis of precipitation chemistry and moisture sources indicate combined marine and continental sources of precipitation and Se, I, Br, and S at both sites. At JFJ, concentrations of I and Se were highest when continental moisture sources were dominant, indicating important terrestrial sources for these elements. Furthermore, correlations between investigated elements and DOC-δ13C, particularly when continental moisture source contributions were high, indicate a link between these elements and the source of dissolved organic matter, especially for I (JFJ and PDM) and Se (JFJ).

Monothioarsenate Transformation Kinetics Determining Arsenic Sequestration by Sulfhydryl Groups of Peat.

In peatlands, arsenite was reported to be effectively sequestered by sulfhydryl groups of natural organic matter. To which extent porewater arsenite can react with reduced sulfur to form thioarsenates and how this affects arsenic sequestration in peatlands is unknown. Here, we show that, in the naturally arsenic-enriched peatland Gola di Lago, Switzerland, up to 93% of all arsenic species in surface and porewaters were thioarsenates. The dominant species, monothioarsenate, likely formed from arsenite and zerovalent sulfur-containing species. Laboratory incubations with sulfide-reacted, purified model peat showed increasing total arsenic sorption with decreasing pH from 8.5 to 4.5 for both, monothioarsenate and arsenite. However, X-ray absorption spectroscopy revealed no binding of monothioarsenate via sulfhydryl groups. The sorption observed at pH 4.5 was acid-catalyzed dissociation of monothioarsenate, forming arsenite. The lower the pH and the more sulfhydryl sites, the more arsenite sorbed which in turn shifted equilibrium toward further dissociation of monothioarsenate. At pH 8.5, monothioarsenate was stable over 41 days. In conclusion, arsenic can be effectively sequestered by sulfhydryl groups in anoxic, slightly acidic environments where arsenite is the only arsenic species. At neutral to slightly alkaline pH, monothioarsenate can form and its slow transformation into arsenite and low affinity to sulfhydryl groups suggest that this species is mobile in such environments.

Spatial distribution and speciation of arsenic in peat studied with Microfocused X-ray fluorescence spectrometry and X-ray absorption spectroscopy.

Arsenic binding by sulfhydryl groups of natural organic matter (NOM) was recently identified as an important As sequestration pathway in the naturally As-enriched minerotrophic peatland Gola di Lago, Switzerland. Here, we explore the microscale distribution, elemental correlations, and chemical speciation of As in the Gola di Lago peat. Thin sections of undisturbed peat samples from 0-37 cm and 200-249 cm depth were analyzed by synchrotron microfocused X-ray fluorescence (µ-XRF) spectrometry and X-ray absorption spectroscopy (µ-XAS). Additionally, peat samples were studied by bulk As, Fe, and S K-edge XAS. Micro-XRF analyses showed that As in the near-surface peat was mainly concentrated in 10-50 µm sized hotspots, identified by µ-XAS as realgar (α-As4S4). In the deep peat layer samples, however, As was more diffusely distributed and mostly associated with particulate NOM of varying decomposition stages. The NOM-associated As was present as trivalent As bound by sulfhydryl groups. Arsenopyrite (FeAsS) and arsenian pyrite (FeAsxS2-x) of <25 µm size, which have escaped detection by bulk As and Fe K-edge XAS, were found as minor As species in the peat. Bulk S K-edge XAS revealed that the deep peat layers were significantly enriched in reduced organic S species. Our findings suggest an authigenic formation of realgar and arsenopyrite in strongly reducing microenvironments of the peat and indicate that As(III)-NOM complexes are formed by the passive sorption of As(III) to NOM. This reaction appears to be favored by a combination of abundant reduced organic S and comparatively low As solution concentrations preventing the formation of secondary As-bearing sulfides.

Arsenic speciation in sulfidic waters: reconciling contradictory spectroscopic and chromatographic evidence.

In recent years, analytical methods have been developed that have demonstrated that soluble arsenic-sulfur species constitute a major fraction of dissolved arsenic in sulfidic waters. However, an intense debate is going on about the exact chemical nature of these compounds, since X-ray absorption spectroscopy (XAS) data generated at higher (mmol/L) concentrations suggest the presence of (oxy)thioarsenites in such waters, while ion chromatographic (IC) and mass spectroscopic data at lower (µmol/L to nmol/L) concentrations indicate the presence of (oxy)thioarsenates. In this contribution, we connect and explain these two apparently different types of results. We show by XAS that thioarsenites are the primary reaction products of arsenite and sulfide in geochemical model experiments in the complete absence of oxygen. However, thioarsenites are extremely unstable toward oxidation, and convert rapidly into thioarsenates when exposed to atmospheric oxygen, e.g., while waiting for analysis on the chromatographic autosampler. This problem can only be eliminated when the entire chromatographic process is conducted inside a glovebox. We also show that thioarsenites are unstable toward sample dilution, which is commonly employed prior to chromatographic analysis when ultrasensitive detectors like ICP-MS are used. This instability has two main reasons: if pH changes during dilution, then equilibria between individual arsenic-sulfur species rearrange rapidly due to their different stability regions within the pH range, and if pH is kept constant during dilution, then this changes the ratio between OH(-) and SH(-) in solution, which in turn shifts the underlying speciation equilibria. This problem is avoided by analyzing samples undiluted. Our studies show that thioarsenites appear as thioarsenates in IC analyses if oxygen is not excluded completely, and as arsenite if samples are diluted in alkaline anoxic medium. This also points out that thioarsenites are necessary intermediates in the formation of thioarsenates.

Mercury loads and fluxes from wastewater: A nationwide survey in Switzerland.

Mercury (Hg) pollution threatens ecosystems and human health. Wastewater treatment plants (WWTPs) play a key role in limiting Hg discharges from wastewaters to rivers and lakes, but large-scale studies to estimate Hg loads and discharge at national levels are scarce. We assessed the concentration, flux, speciation, and removal of Hg in municipal wastewater throughout Switzerland by investigating 64 WWTPs in a pre-study and a subset of 28 WWTPs in the main study. We also studied the behavior and pathways of Hg along the various treatment steps in a state-of-the-art WWTP. The resulting dataset, representative of industrialized countries, provides an overview of (i) current Hg concentration ranges, (ii) average per capita loads, and (iii) wastewater Hg inputs into surface waters. The results allowed estimation of a total Hg (THg) load in Swiss wastewater of 130 ± 30 kg THg/year (15.7 mg/capita/y), of which 96 ± 4% is retained in sewage sludge. About 4.7 ± 0.5 kg THg/year (0.57 mg/capita/y) is discharged with the treated wastewater into surface waters. This corresponds to only 1.5-3% of the THg load carried by the major Swiss rivers, indicating that >95% of riverine Hg originates from other sources. Extrapolation to the population of Europe would yield a total amount of 11,700 kg THg/year in raw wastewater, with some 480 kg THg/year discharged to surface waters. Monomethyl mercury on average accounted for 0.23% of THg, and its fraction remained constant along the different treatment steps.

Discrimination of thioarsenites and thioarsenates by X-ray absorption spectroscopy.

Soluble arsenic-sulfur compounds play important roles in the biogeochemistry of arsenic in sulfidic waters but conflicting analytical evidence identifies them as either thioarsenates (= As(V)-sulfur species) or thioarsenites (= As(III)-sulfur species). Here, we present the first characterization of thioarsenates (mono-, di-, and tetrathioarsenate) by X-ray absorption spectroscopy and demonstrate that their spectra are distinctly different from those of As(III)-sulfur species, as well as from arsenite and arsenate. The absorption near edge energy decreases in the order arsenate > thioarsenates > arsenite > As(III)-sulfur species, and individual thioarsenates differ by 1 eV per sulfur atom. Fitted As(V)-S and As(V)-O bond distances in thioarsenates (2.13-2.18 A and 1.70 A, respectively) are significantly shorter than the corresponding As(III)-S and As(III)-O bond distances in As(III)-S species (2.24-2.34 A and 1.78 A, respectively). Finally, we demonstrate that thioarsenates can be identified by principal component analysis in mixtures containing As(III)-sulfur species. This capability is used to study the spontaneous reduction of tetrathioarsenate to As(III)-sulfur species (possibly trithioarsenite) upon acidification from pH 9.5 to 2.8.

Soil-to-plant transfer of arsenic and phosphorus along a contamination gradient in the mining-impacted Ogosta River floodplain.

Riverine floodplains downstream of active or former metal sulfide mines are in many cases contaminated with trace metals and metalloids, including arsenic (As). Since decontamination of such floodplains on a large scale is unfeasible, management of contaminated land must focus on providing land use guidelines or even restrictions. This should be based on knowledge about how contaminants enter the food chain. For As, uptake by plants may be an important pathway, but the As soil-to-plant transfer under field conditions is poorly understood. Here, we investigated the soil-to-shoot transfer of As and phosphorus (P) in wild populations of herbaceous species growing along an As contamination gradient across an extensive pasture in the mining-impacted Ogosta River floodplain. The As concentrations in the shoots of Trifolium repens and Holcus lanatus reflected the soil contamination gradient. However, the soil-to-shoot transfer factors (TF) were fairly low, with values mostly below 0.07 (TF=Asshoot/Assoil). We found no evidence for interference of As with P uptake by plants, despite extremely high molar As:P ratios (up to 2.6) in Olsen soil extracts of the most contaminated topsoils (0-20cm). Considering the restricted soil-to-shoot transfer, we estimated that for grazing livestock As intake via soil ingestion is likely more important than intake via pasture herbage.

Thioarsenate formation upon dissolution of orpiment and arsenopyrite.

Thioarsenates were previously determined as dominant species in geothermal and mineral waters with excess sulfide. Here, we used batch leaching experiments to determine their formation upon weathering or industrial leaching of the arsenic-sulfide minerals orpiment (As(2)S(3)) and arsenopyrite (FeAsS) under different pH and oxygen conditions. Under acidic conditions, as expected based on their known kinetic instability at low pH, no thioarsenates formed in either of the two mineral systems. Under neutral to alkaline conditions, orpiment dissolution yielded mono-, di- and trithioarsenate which accounted for up to 43-55% of total arsenic. Thioarsenate formation upon arsenopyrite dissolution was low at neutral (4%) but significant at alkaline pH, especially under suboxic to sulfidic conditions (20-43%, mainly as monothioarsenate). In contrast to orpiment, we postulate that recombination of arsenite and sulfide in solution is of minor importance for monothioarsenate formation during alkaline arsenopyrite dissolution. We propose instead that hydroxyl physisorption lead to formation of As-OH-S surface complexes by transposition of hydroxyl anions to arsenic or iron sites. Concurrently formed ironhydroxides could provide re-sorption sites for the freshly released monothioarsenate. However, sorption experiments with goethite showed slower sorption kinetics of monothioarsenate compared to arsenite, but comparable with arsenate. The discovery that thioarsenates are released by natural weathering and industrial leaching processes and that, once they are released, have a higher mobility than the commonly-investigated species arsenite and arsenate requires future studies to consider them when assessing arsenic release in sulfidic natural or mining-impacted environments.

Stabilization of thioarsenates in iron-rich waters.

In recent years, thioarsenates have been shown to be important arsenic species in sulfidic, low-iron waters. Here, we show for the first time that thioarsenates also occur in iron-rich ground waters, and that all methods previously used to preserve arsenic speciation (acidification, flash-freezing, or EDTA addition) fail to preserve thioarsenates in such matrices. Laboratory studies were conducted to identify the best approach for stabilizing thioarsenates by combination and modification of the previously-applied methods. Since acidification was shown to induce conversions between thioarsenates and precipitation of arsenic-sulfide minerals, we first conducted a detailed study of thioarsenate preservation by flash-freezing. In pure water, thioarsenates were stable for 21d when the samples were flash-frozen and cryo-stored with a minimal and anoxic headspace. Increasing headspace volume and oxygen presence in the headspace were detrimental to thioarsenate stability during cryo-storage. Addition of NaOH (0.1M) or EtOH (1% V/V) counteracted these effects and stabilized thioarsenates during cryo-storage. Addition of Fe(II) to thioarsenate solutions caused immediate changes in arsenic speciation and a loss of total arsenic from solution during cryo-storage. Both effects were largely eliminated by addition of a neutral EDTA-solution, and thioarsenates were significantly stabilized during cryo-storage by this procedure. Neutralization of EDTA was required to prevent alteration of thioarsenate speciation through pH change. With the modified method (anoxic cryo-preservation by flash-freezing with minimal headspace after addition of neutralized EDTA-solution), the fractions of mono- and dithioarsenate, the two thioarsenates observed in the iron-rich ground waters, remained stable over a cryo-storage period of 11d. Further modifications are needed for the higher SH-substituted thioarsenates (tri- and tetrathioarsenate), which were not encountered in the studied iron-rich ground waters.