RESUMO
BACKGROUND: The elastomechanical properties of nanocarriers have recently been discussed as important for the efficient delivery of various therapeutics. Some data indicate that optimal nanocarriers' elasticity can modulate in vivo nanocarrier stability, interaction with phagocytes, and uptake by target cells. Here, we presented a study to extensively analyze the in vivo behavior of LIP-SS liposomes that were modified by forming the silicone network within the lipid bilayers to improve their elastomechanical properties. We verified liposome pharmacokinetic profiles and biodistribution, including retention in tumors on a mouse model of breast cancer, while biocompatibility was analyzed on healthy mice. RESULTS: We showed that fluorescently labeled LIP-SS and control LIP-CAT liposomes had similar pharmacokinetic profiles, biodistribution, and retention in tumors, indicating that modified elasticity did not improve nanocarrier in vivo performance. Interestingly, biocompatibility studies revealed no changes in blood morphology, liver, spleen, and kidney function but indicated prolonged activation of immune response manifesting in increased concentration of proinflammatory cytokines in sera of animals exposed to all tested liposomes. CONCLUSION: Incorporating the silicone layer into the liposome structure did not change nanocarriers' characteristics in vivo. Further modification of the LIP-SS surface, including decoration with hydrophilic stealth polymers, should be performed to improve their pharmacokinetics and retention in tumors significantly. Activation of the immune response by LIP-SS and LIP-CAT, resulting in elevated inflammatory cytokine production, requires detailed studies to elucidate its mechanism.
Assuntos
Elasticidade , Lipossomos , Silicones , Lipossomos/química , Animais , Camundongos , Feminino , Silicones/química , Distribuição Tecidual , Camundongos Endogâmicos BALB C , Linhagem Celular Tumoral , Neoplasias da Mama/tratamento farmacológico , Bicamadas Lipídicas/química , Portadores de Fármacos/químicaRESUMO
Low water solubility frequently compromises the therapeutic efficacy of drugs and other biologically active molecules. Here, we report on coacervate polysaccharide nanoparticles (CPNs) that can transport and release a model hydrophobic drug, piroxicam, to the cells in response to changes in temperature. The proposed, temperature-responsive drug delivery system is based on ionic derivatives of natural polysaccharides-curdlan and hydroxypropyl cellulose. Curdlan was modified with trimethylammonium groups, while the anionic derivative of hydroxypropyl cellulose was obtained by the introduction of styrenesulfonate groups. Thermally responsive nanoparticles of spherical shape and average hydrodynamic diameter in the range of 250-300 nm were spontaneously formed in water from the obtained ionic polysaccharides as a result of the coacervation process. Their morphology was visualized using SEM and AFM. The size and the surface charge of the obtained objects could be tailored by adjusting the polycation/polyanion ratio. Piroxicam (PIX) was effectively entrapped inside the nanoparticles. The release profile of the drug from the CPNs-PIX was found to be temperature-dependent in the range relevant for biomedical applications.
Assuntos
Anti-Inflamatórios não Esteroides/administração & dosagem , Portadores de Fármacos/química , Sistemas de Liberação de Medicamentos , Nanopartículas/química , Piroxicam/administração & dosagem , Polissacarídeos/química , Algoritmos , Celulose/análogos & derivados , Celulose/química , Técnicas de Química Sintética , Microscopia de Força Atômica , Modelos Teóricos , Estrutura Molecular , Polieletrólitos/química , Análise Espectral , TemperaturaRESUMO
Mid-infrared absorption spectroscopy has been used extensively to study the molecular properties of cell membranes and model systems. Most of these studies have been carried out on macroscopic samples or on samples a few micrometers in size, due to constraints on sensitivity and spatial resolution with conventional instruments that rely on far-field optics. Properties of membranes on the scale of nanometers, such as in-plane heterogeneity, have to date eluded investigation by this technique. In the present work, we demonstrate the capability to study single bilayers of phospholipids with near-field mid-infrared spectroscopy and imaging and achieve a spatial resolution of at least 40 nm, corresponding to a sample size of the order of a thousand molecules. The quality of the data and the observed spectral features are consistent with those reported from measurements of macroscopic samples and allow detailed analysis of molecular properties, including orientation and ordering of phospholipids. The work opens the way to the nanoscale characterization of the biological membranes for which phospholipid bilayers serve as a model.
Assuntos
Bicamadas Lipídicas/química , Fosfolipídeos/química , Espectrofotometria Infravermelho/métodos , Limite de Detecção , Microscopia de Força Atômica , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Surface-grafted polymer brushes of novel ladder-like architecture were proposed for inducing ordering of chromophores embedded therein. The brushes with acetylene side groups were obtained by surface-initiated photoiniferter-mediated polymerization. The acetylene moieties reacted then through a "click" process with an axially azide-bifunctionalized silicon phthalocyanine bridging the neighboring chains that inherently adopt extended conformations in dense brushes. FTIR, quartz crystal microbalance, and atomic force microscopy were used to study formation and structure of the photoactive brushes varying in grafting densities. Importantly, photophysical properties of the chromophores were virtually unaffected upon embedding them into the brushes, as evidenced by UV/Vis absorption and emission spectroscopy. Owing to the unique ordering of the chromophores, the proposed method may open new opportunities for the fabrication of light-harvesting systems suitable for photovoltaic or sensing applications.
Assuntos
Polímeros/química , Azidas/química , Química Click , Indóis/química , Microscopia de Força Atômica , Compostos de Organossilício/química , Técnicas de Microbalança de Cristal de Quartzo , Espectrofotometria , Espectroscopia de Infravermelho com Transformada de FourierRESUMO
Novel, highly fluorescent cadmium telluride quantum dots conjugated with thymine and stabilized with thioglycolic acid were obtained and characterized. Successful formation of the conjugate was confirmed by elemental analysis, and UV-vis, fluorescence and Fourier transform infrared spectroscopies. Crystal structure and composition of the conjugates were characterized with xray diffraction and x-ray photoelectron spectroscopy. The size of the conjugates was 4-6 nm as demonstrated using atomic force microscopy and high resolution transmission electron microscopy imaging. The plasmon resonance fluorescence band at 540 nm on excitation at 351 nm was observed for these nanoparticles. The intensity of this band increased with the increase in the amount of conjugated thymine with no shift in its position. Based on the fluorescence measurements it was found that the CdTe-thymine conjugate interacted efficiently and selectively not only with adenine, a nucleobase complementary to thymine, but also with adenine-containing modified nucleosides, i.e., 5'-deoxy-5'-(methylthio)adenosine and 2'-O-methyladenosine, the urinary tumor markers which allow monitoring of the disease progression. To the best of our knowledge, as yet, there have been no studies presented in literature on that type of the interaction with CdTe-thymine conjugates. Therefore, the system presented can be considered as a working component of a selective adenine/adenosine biosensor with potential application in cancer diagnosis.
RESUMO
The formation of complete supported lipid bilayers by vesicle adsorption and rupture was studied in relation to deposition conditions of vesicles and underlying cushion formed from various polyelectrolytes. Lipid vesicles were formed from zwitterionic 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and negatively charged 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoethanolamine (POPE) in phosphate buffer of various pH with or without NaCl addition. Polyelectrolyte multilayer films (PEM) were constructed by sequential adsorption of alternately charged polyelectrolytes from their solutions-layer-by-layer deposition (LBL). The mechanism of the formation of supported lipid bilayer on polyelectrolyte films was studied by quartz crystal microbalance with dissipation monitoring (QCM-D) and atomic force microscopy (AFM). QCM-D allowed following the adsorption kinetics while AFM measurements verified the morphology of lipid vesicles and isolated bilayer patches on the PEM cushions providing local topological images in terms of lateral organization. Additionally, polyelectrolyte cushions were characterized with ellipsometry to find thickness and swelling properties, and their roughness was determined using AFM. It has been demonstrated that the pH value and an addition of NaCl in the buffer solution as well as the type of the polyelectrolyte cushion influence the kinetics of bilayer formation and the quality of formed bilayer patches.
Assuntos
Bicamadas Lipídicas/química , Fosfatidilcolinas/química , Fosfatidiletanolaminas/química , Polímeros/química , Eletrólitos/química , Concentração de Íons de Hidrogênio , Cinética , Microscopia de Força Atômica , Tamanho da Partícula , Técnicas de Microbalança de Cristal de Quartzo , Cloreto de Sódio/química , Propriedades de SuperfícieRESUMO
In urbanized areas, extracellular DNA (exDNA) is suspected of carrying genes with undesirable traits like virulence genes (VGs) or antibiotic resistance genes (ARGs), which can spread through horizontal gene transfer (HGT). Hence, it is crucial to develop novel approaches for the mitigation of exDNA in the environment. Our research explores the role of goethite, a common iron mineral with high adsorption capabilities, in exDNA adsorption processes. We compare well-crystalline, semi-crystalline, and nano goethites with varying particle sizes to achieve various specific surface areas (SSAs) (18.7-161.6 m2/g) and porosities. We conducted batch adsorption experiments using DNA molecules of varying chain lengths (DNA sizes: <11 Kb, <6 Kb, and <3 Kb) and assessed the impact of Ca2+ and biomacromolecules on the adsorption efficacy and mechanisms. Results show that porosity and pore structure significantly influence DNA adsorption capacity. Goethite with well-developed meso- and macroporosity demonstrated enhanced DNA adsorption. The accumulation of DNA on the goethite interface led to substantial aggregation in the system, thus the formation of DNA-goethite conjugates, indicating the bridging between mineral particles. DNA chain length, the presence of Ca2+, and the biomacromolecule matrix also affected the adsorption capacity and mechanism. Interactions between DNA and positively charged biomacromolecules or Ca2+ led to DNA compaction, allowing greater DNA accumulation in pores. However, a high concentration of biomacromolecules led to the saturation of the goethite surface, inhibiting DNA adsorption. AFM imaging of goethite particles after adsorption suggested the formation of the DNA multilayer. The study advances understanding of the environmental behavior of exDNA and its interaction with iron oxyhydroxides, offering insights into developing more effective methods for ARGs removal in wastewater treatment plants. By manipulating the textural properties of goethite, it's possible to enhance exDNA removal, potentially reducing the spread of biocontamination in urban and industrial environments.
Assuntos
DNA , Compostos de Ferro , Minerais , Compostos de Ferro/química , Adsorção , Minerais/química , DNA/química , Porosidade , Tamanho da PartículaRESUMO
In this paper, we present a facile method of synthesis and modification of poly(glycidyl methacrylate) brushes with 6-aminofluorescein (6AF) molecules. Polymer brushes were obtained using surface-grafted atom transfer radical polymerization (SI-ATRP) and functionalized in the presence of triethylamine (TEA) acting both as a reaction catalyst and an agent preventing aggregation of chromophores. Atomic force microscopy (AFM), FTIR, X-ray photoelectron spectroscopy (XPS) were used to study the structure and formation of obtained photoactive platforms. UV-Vis absorption and emission spectroscopy and confocal microscopy were conducted to investigate photoactivity of chromophores within the macromolecular matrix. Owing to the simplicity of fabrication and good ordering of the chromophore in a thin nanometric layer, the proposed method may open new opportunities for obtaining light sensors, photovoltaic devices, or other light-harvesting systems.
RESUMO
The conditions applied during the electrochemical polishing of aluminum were found to be important parameters for the successive formation of nanoporous alumina films. First, a high-purity Al foil was electrochemically polished in an aqueous solution containing C2H5OH and HClO4 at various sets of conditions, such as applied potential (5-35 V), temperature (0-20 °C), and process duration (10-180 s). Extensive studies of the topography of Al after polishing by scanning electron microscopy and atomic force microscopy allow verification of the correlations between conditions applied during the substrate pretreatment and dimensions of the nanopatterns generated on the metal surface. Next, Al polished samples at two different sets of conditions were used as starting materials for anodization. Unpolished Al samples were also anodized for reference. It was confirmed that electropolishing conditions do not significantly affect the oxide growth rate during anodization and the efficiency of anodic film formation. On the contrary, it was proved that the dimensions of the surface texture formed during Al polishing significantly affect the morphology and pore order within the anodic film. Therefore, it can be stated that it is possible to tune to some extent the arrangement of nanochannels within anodic aluminum oxide films by simply changing conditions during the electropolishing procedure..
RESUMO
Triple-layered, pH-sensitive and active films based on furcellaran (FUR), chitosan (CHIT) and gelatin hydrolysates (HGEL) were obtained for the first time. Curcumin ethanol extract (CUR) enriched with lemongrass essential oil (LEO) in three concentrations was added to the middle layer of the film. SEM and AFM analysis confirmed the formation of 3 layers, and CUR-LEO was evenly dispersed in the 2nd layer. The addition of CUR-LEO influenced the color of the surface and improved the UV blocking properties of the film. However, the mechanical and water vapor barrier properties remained unchanged. The CUR-LEO demonstrated antibacterial properties against bacteria and fungi. The antioxidant activity of the films increased along with the increasing concentrations of CUR-LEO. The presented films were able to effectively extend the storage life of tomatoes. Moreover, the colored films had the monitoring freshness effect with a distinct color change during carp storage.
Assuntos
Quitosana , Curcumina , Cymbopogon , Óleos Voláteis , Gelatina , Curcumina/farmacologia , Embalagem de Alimentos , Óleos Voláteis/farmacologia , Antioxidantes/farmacologia , Extratos Vegetais/farmacologiaRESUMO
Multicomponent equimolar perovskite oxides (ME-POs) have recently emerged as a highly promising class of materials with unique synergistic effects, making them well-suited for applications in such areas as photovoltaics and micro- and nanoelectronics. High-entropy perovskite oxide thin film in the (Gd0.2Nd0.2La0.2Sm0.2Y0.2)CoO3 (RECO, where RE = Gd0.2Nd0.2La0.2Sm0.2Y0.2, C = Co, and O = O3) system was synthesized via pulsed laser deposition. The crystalline growth in an amorphous fused quartz substrate and single-phase composition of the synthesized film was confirmed by X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS). Surface conductivity and activation energy were determined using a novel technique implementing atomic force microscopy (AFM) in combination with current mapping. The optoelectronic properties of the deposited RECO thin film were characterized using UV/VIS spectroscopy. The energy gap and nature of optical transitions were calculated using the Inverse Logarithmic Derivative (ILD) and four-point resistance method, suggesting direct allowed transitions with altered dispersions. The narrow energy gap of RECO, along with its relatively high absorption properties in the visible spectrum, positions it as a promising candidate for further exploration in the domains of low-energy infrared optics and electrocatalysis.
RESUMO
To improve the quality of multi-layer film, four-layer films based on furcellaran and active ingredients: gelatin hydrolysate, curcumin, capsaicin, montmorillonite and AgNPs, were produced in an innovative manner. The films were characterised by SEM and AFM analysis. Along with an increase in the concentration of active ingredients, the structure of the film becomes less homogeneous, which may affect the functional properties. The objective of the study was to analyse changes in the functional properties of the newly-obtained films and to verify their potential as packaging materials for fish products. With the increase in active ingredient concentration, water properties also improved, but there were no noticeable significant effects on mechanical properties. For antioxidant properties, the obtained values were within 1.04-2.74 mM Trolox/mg (FRAP) and 7.67-40.49% (DPPH). The obtained multi-layer films were examined with regard to the shelf-life of salmon. For this purpose, salmon fillets were packed in films having good antioxidant and functional properties. The films were effective in microorganism growth inhibition responsible for fillet spoilage during storage. The microorganism number in the active film-stored samples was lower by 0.13 log CFU/g on day 12 versus the control. However, film application did not retard lipid oxidation in the salmon fillets. Nonetheless, the films show great potential as active packaging materials, extending the shelf-life of the packed foods.
Assuntos
Antioxidantes , Embalagem de Alimentos , Animais , Antioxidantes/química , Alginatos/química , Gomas Vegetais/químicaRESUMO
In this study, we developed a new filtering bioaerogel based on linear polyvinyl alcohol (PVA) and the cationic derivative of chitosan (N-[(2-hydroxy-3-trimethylamine) propyl] chitosan chloride, HTCC) with a potential antiviral application. A strong intermolecular network architecture was formed thanks to the introduction of linear PVA chains, which can efficiently interpenetrate the glutaraldehyde(GA)-crosslinked HTCC chains. The morphology of the obtained structures was examined using scanning electron microscopy (SEM) and atomic force microscopy (AFM). The aerogels and modified polymers' elemental composition (including the chemical environment) was determined using X-ray photoelectron spectroscopy (XPS). New aerogels with more than twice as much developed micro- and mesopore space and BET-specific surface area were obtained concerning the starting sample chitosan aerogel crosslinked by glutaraldehyde (Chit/GA). The results obtained from the XPS analysis showed the presence of cationic 3-trimethylammonium groups on the surface of the aerogel, which can interact with viral capsid proteins. No cytotoxic effect of HTCC/GA/PVA aerogel was also observed on fibroblast cells of the NIH3T3 line. Furthermore, the HTCC/GA/PVA aerogel has been shown that efficiently traps mouse hepatitis virus (MHV) from suspension. The presented concept of aerogel filters for virus capture based on modified chitosan and polyvinyl alcohol has a high application potential.
Assuntos
Quitosana , Vírus , Animais , Camundongos , Quitosana/química , Álcool de Polivinil/química , Glutaral/química , Células NIH 3T3RESUMO
Double-layered active films based on furcellaran (1st layer-FUR), chitosan, and gelatin hydrolysates (2nd layer-CHIT+HGEL) were successfully prepared. Bioactive ingredients were added to the 1st film layer: AgNPs, which were synthesized in situ with yerba mate extract; montmorillonite clay (MMT); and different loads of ethanolic curcumin (CUR) extract enriched with rosemary essential oil (REO). SEM images confirmed the presence of AgNPs with a size distribution of 94.96 ± 3.33 nm throughout the films, and AFM and SEM photos indicated that the higher substance concentrations had rougher and more porous film microstructures. However, the water vapor transmission rate was reduced only at the lowest load of this ingredient. Despite the tensile strength of the films having decreased, the incorporation of the compounds showed a tendency towards reducing the modulus of elasticity, resulting in a lower stiffness of the composites. The addition of CUR and AgNPs improved the UV light barrier properties of the materials. The presented films showed quick reactions to changes in the pH value (from orange to red along with an increase in pH from 2 to 10), which indicates their potential use as indicators for monitoring the freshness of food products. Composite No. 2 showed the highest antimicrobial potential, while none of the presented films showed an antifungal effect. Finally, the antioxidant activities of the films increased dramatically at higher AgNP and CUR loads, suggesting an outstanding potential for active food packaging applications.
RESUMO
Control of nonspecific/specific protein adsorption is the main goal in the design of novel biomaterials, implants, drug delivery systems, and sensors. The specific functionalization of biomaterials can be achieved by proper surface modification. One of the important strategies is covering the materials with functional coatings. Therefore, our work aimed to functionalize multilayer coating to control nonspecific/specific protein adsorption. The polyelectrolyte coating was formed using a layer-by-layer technique (LbL) with biocompatible polyelectrolytes poly-L-lysine hydrobromide (PLL) and poly-L-glutamic acid (PGA). Nonspecific protein adsorption was minimized/eliminated by pegylation of multilayer films, which was achieved by adsorption of pegylated polycations (PLL-g-PEG). The influence of poly (ethylene glycol) chain length on eliminating nonspecific protein adsorption was confirmed. Moreover, to achieve specific protein adsorption, the multilayer film was also functionalized by immobilization of antibodies via a streptavidin bridge. The functional coatings were tested, and the adsorption of the following proteins confirmed the ability to control nonspecific/specific adsorption: human serum albumin (HSA), fibrinogen (FIB), fetal bovine serum (FBS), carcinoembryonic antigen human (CEA) monitored by quartz crystal microbalance with dissipation (QCM-D). AFM imaging of unmodified and modified multilayer surfaces was also performed. Functional multilayer films are believed to have the potential as a novel platform for biotechnological applications, such as biosensors and nanocarriers for drug delivery systems.
RESUMO
The layer-by-layer (LbL) method of polyelectrolyte multilayer (PEM) fabrication is extremely versatile. It allows using a pair of any oppositely charged polyelectrolytes. Nevertheless, it may be difficult to ascribe a particular physicochemical property of the resulting PEM to a structural or chemical feature of a single component. A solution to this problem is based on the application of a polycation and a polyanion obtained by proper modification of the same parent polymer. Polyelectrolyte multilayers (PEMs) were prepared using the LbL technique from hydrophilic and amphiphilic derivatives of poly(allylamine hydrochloride) (PAH). PAH derivatives were obtained by the substitution of amine groups in PAH with sulfonate, ammonium, and hydrophobic groups. The PEMs were stable in 1 M NaCl and showed three different modes of thickness growth: exponential, mixed exponential-linear, and linear. Their surfaces ranged from very hydrophilic to hydrophobic. Root mean square (RMS) roughness was very variable and depended on the PEM composition, sample environment (dry, wet), and the polymer constituting the topmost layer. Atomic force microscopy (AFM) imaging of the surfaces showed very different morphologies of PEMs, including very smooth, porous, and structured PEMs with micellar aggregates. Thus, by proper choice of PAH derivatives, surfaces with different physicochemical features (growth type, thickness, charge, wettability, roughness, surface morphology) were obtained.
RESUMO
The aim of research was to develop biopolymer films based on natural polysaccharides. For the first time, biodegradable films were obtained on the basis of a furcellaran-chitosan polyelectrolyte complex. The conditions for its formation were determined by measuring the zeta potential as a function of colloid pH, the size of pure components and their mixtures. The structure and morphology of the prepared films were characterised by FT-IR and AFM analysis. The lowest WVTR values were observed for the FUR and the CHIT-FUR films at the ratio of 9:1. The mechanical, water and rheological properties depend on the weight ratio of furcellaran to chitosan in the mixture. The thermal stability has been improved in CHIT-FUR films at the 9:1 ratio. The results obtained create the possibility of successfully using CHIT-FUR films in the development of biodegradable packaging materials.
RESUMO
The aim of the study was to develop and characterise an innovative three-component biopolymer film based on chitosan (CHIT), furcellaran (FUR) and a gelatin hydrolysate from carp skins (Cyprinus carpio) (HGEL). The structure and morphology were characterised using the Fourier transform infrared spectroscopy (FT-IR) and atomic force microscopy (AFM). The FT-IR test showed no changes in the matrix after the addition of HGEL, which indicates that the film components were compatible. Based on the obtained AFM results, it was found that the addition of HGEL caused the formation of grooves and cracks on the surface of the film (reduction by ~21%). The addition of HGEL improved the antioxidant activity of the film (improvement by up to 2.318% and 444% of DPPH and FRAP power, respectively). Due to their properties, the tested films were used as active materials in the preservation of American blueberries. In the active films, the blueberries lost mass quickly compared to the synthetic film and were characterised by higher phenol content. The results obtained in this study create the opportunity to use the designed CHIT-FUR films in developing biodegradable packaging materials for food protection, but it is necessary to test their effectiveness on other food products.
RESUMO
A variety of polymeric scaffolds with the ability to control cell detachment has been created for cell culture using stimuli-responsive polymers. However, the widely studied and commonly used thermo-responsive polymeric substrates always affect the properties of the cultured cells due to the temperature stimulus. Here, we present a different stimuli-responsive approach based on poly(3-acrylamidopropyl)trimethylammonium chloride) (poly(APTAC)) brushes with homogeneously embedded superparamagnetic iron oxide nanoparticles (SPIONs). Neuroblastoma cell detachment was triggered by an external magnetic field, enabling a non-invasive process of controlled transfer into a new place without additional mechanical scratching and chemical/biochemical compound treatment. Hybrid scaffolds obtained in simultaneous surface-initiated atom transfer radical polymerization (SI-ATRP) were characterized by atomic force microscopy (AFM) working in the magnetic mode, secondary ion mass spectrometry (SIMS), and X-ray photoelectron spectroscopy (XPS) to confirm the magnetic properties and chemical structure. Moreover, neuroblastoma cells were cultured and characterized before and after exposure to a neodymium magnet. Controlled cell transfer triggered by a magnetic field is presented here as well.