Current status and new experimental diagnostic methods of invasive fungal infections after hematopoietic stem cell transplantation.

Invasive fungal infections (IFIs) are common and life-threatening complications in post-hematopoietic stem cell transplantation (post-HSCT) recipients, Severe IFIs can lead to systemic infection and organ damage, which results in high mortality in HSCT recipients. With the development of the field of fungal infection diagnosis, more and more advanced non-culture diagnostic tools have been developed, such as glip biosensors, metagenomic next-generation sequencing, Magnetic Nanoparticles and Identified Using SERS via AgNPs+ , and artificial intelligence-assisted diagnosis. The advanced diagnostic approaches contribute to the success of HSCT and improve the overall survival of post-HSCT leukemia patients by supporting therapeutical decisions. This review provides an overview of the characteristics of two high-incidence IFIs in post-HSCT recipients and discusses some of the recently developed IFI detection technologies. Additionally, it explores the potential application of cationic conjugated polymer fluorescence resonance energy transfer (CCP-FRET) technology for IFI detection. The aim is to offer insights into selecting appropriate IFI detection methods and gaining an understanding of novel fungal diagnostic approaches in laboratory settings.

Regulation of Catalysts on Tightly Packaged Solid Propellant Energetic Particles: High Combustion Performance with Low Temperature Sensitivity.

Although the effectiveness of combustion catalysts promoting the combustion performance of solid propellant (SP) was identified in many research studies, its regulation on the temperature sensitivity coefficient of burning rate (δp) has been rarely explored, where SP with low δp is a big challenge with little progress. Herein, several ammonium perchlorate (AP)-enriched (>70 wt %) pomegranate-structured SP energetic particles (SPPs), AP/nitrocellulose (NC)/Al (SPP), SPP/CoWO4-rGO (SPP-Co), SPP/Bi2WO6-rGO (SPP-Bi), and SPP/CuCo2O4/GO (SPP-Cu), were prepared by the electrospray granulation method, tightly packaging AP with high-efficiency catalysts to promote its reactivity and reduce temperature sensitivity. The pressurization rates of SPPs in a constant volume combustion chamber at 50, 0, and -40 °C were obtained to determine δp. The burning rates of SPP-Co, SPP-Bi, and SPP-Cu loose strips are 0.319, 0.312, and 0.356 m/s, which are increased by 11.1%, 8.7%, and 24.0% compared to that of SPP (0.287 m/s), respectively. The peak pressures and pressurization rates of SPP-Co, SPP-Bi, and SPP-Cu at 0 °C are increased by 18.8%, 10.1%, and 9.1% and 62.3%, 67.1%, and 64.1% compared with SPP, respectively, indicating that these catalysts significantly accelerate the combustion process. Compared with SPP, the δp of SPP-Co, SPP-Bi, and SPP-Cu decreased by 26.6%, 60.6%, and 24.7% at 0-50 °C and 19.5%, 61.6%, and 27.6% at -40-0 °C, respectively. It suggests that the Bi2WO6-rGO catalyst reduces the δp by 61% at -40-50 °C, exhibiting the optimal δp regulation performance. This research introduces a novel approach to lower the δp from the chemical by tightly packaging temperature-sensitive AP with high-efficiency catalysts.

Comprehensive Investigation of the Temperature-Dependent Electromechanical Behaviors of Carbon Nanotube/Polymer Composites.

The performances of flexible piezoresistive sensors based on polymer nanocomposites are significantly affected by the environmental temperature; therefore, comprehensively investigating the temperature-dependent electromechanical response behaviors of conductive polymer nanocomposites is crucial for developing high-precision flexible piezoresistive sensors in a wide-temperature range. Herein, carbon nanotube (CNT)/polydimethylsiloxane (PDMS) composites widely used for flexible piezoresistive sensors were prepared, and then the temperature-dependent electrical, mechanical, and electromechanical properties of the optimized CNT/PDMS composite in the temperature range from -150 to 150 °C were systematically investigated. At a low temperature of -150 °C, the CNT/PDMS composite becomes brittle with a compressive modulus of ∼1.2 MPa and loses its elasticity and reversible sensing capability. At a high temperature (above 90 °C), the CNT/PDMS composite softens, shows a fluid-like mechanical property, and loses its reversible sensing capability. In the temperature range from -60 to 90 °C, the CNT/PDMS composite exhibits good elasticity and reversible sensing behaviors and its modulus, resistivity, and sensing sensitivity decrease with an increasing temperature. At room temperature (30 °C), the CNT/PDMS composite exhibits better mechanical and piezoresistive stability than those at low and high temperatures. Given that environmental temperature changes have significant effects on the sensing performances of conductive polymer composites, the effect of ambient temperature changes must be considered when flexible piezoresistive sensors are designed and fabricated.

Geochemical characteristics, source analysis, influencing factors, and reserves of soil Selenium in Wuming, Guangxi, China.

Although selenium (Se) reserves are crucial for the development and exploitation of Se-rich resources in karst soil areas, research on these reserves is still limited. A comprehensive study was conducted in a typical karst region known for its Se richness. A total of 12,547 surface soil samples, 134 deep soil samples, and 60 soil profiles from various locations were systematically collected. The findings showed that the Se content in the surface soil ranged from 0.073 to 9.04 mg/kg, with a baseline level of 0.84 mg/kg. This underscores the high background level and moderate variability in the region. Surface soil Se exhibited a notable positive correlation with deep soil Se, and an inverse correlation with pH (p < 0.01). One-way analysis of variance indicated that land formations and soil structure were the primary determinants affecting the concentration of Se in the topsoil (p = 0.000), with parent rock type and land-use type following closely (p = 0.003). In addition, the study included an investigation of soil Se variations with depth using 60 soil profiles. Through this analysis, it was revealed that Se content exhibited an exponential change with depth. Multiple integrations were employed to derive formulas for calculating Se reserves in the 0-200 cm depth range. Following these calculations, the estimations of Se stockpile across diverse types of source materials, varieties of soils, and land management methods were determined, highlighting the findings using a passive construction. This paper lays the groundwork for advancing the extraction and application of Se.

Assessment of soil environmental capacity for heavy metals in Shantou City, Guangdong Province, China: source analysis and enrichment evaluation.

Most studies assessing soil environmental capacity (EC) often overlook the impact of heavy metal sources. Analyzing the sources of heavy metals (HMs) provides a better understanding of regional environmental capacity characteristics and their dynamic changes. The current study focuses on the surface soil of Shantou, using 511 soil samples to assess the soil environmental capacity. Results indicate that the contents of As, Cd, Cr, Cu, Hg, Ni, Pb, and Zn in Shantou's surface soil are notable, with lead moderately enriched and other metals lightly enriched. The principal component analysis (PCA) identifies five primary sources of heavy metals: mixed natural and agricultural sources, mixed agricultural and industrial sources, industrial sources, mining sources, and quarrying sources. The primary source contributing significantly to soil HM concentrations in Shantou City is a complex interplay between natural geological processes and extensive agricultural practices. In terms of static environmental capacity, Zn, Cr, Ni, Pb, Cu, As, Hg, and Cd are ranked in descending order. The overall environmental capacity for heavy metals in the soil is at a medium level, influenced by geological backgrounds. However, regions such as Yanhong Town, Guiyu Town, and Chendian Town face lower environmental capacities due to comprehensive human activities, posing certain risks. This study provides a scientific reference for forecasting, controlling soil heavy metal pollution, and improving soil quality and environmental capacity in Shantou City.

Emerging MXene-Based Flexible Tactile Sensors for Health Monitoring and Haptic Perception.

Due to their potential applications in physiological monitoring, diagnosis, human prosthetics, haptic perception, and human-machine interaction, flexible tactile sensors have attracted wide research interest in recent years. Thanks to the advances in material engineering, high performance flexible tactile sensors have been obtained. Among the representative pressure sensing materials, 2D layered nanomaterials have many properties that are superior to those of bulk nanomaterials and are more suitable for high performance flexible sensors. As a class of 2D inorganic compounds in materials science, MXene has excellent electrical, mechanical, and biological compatibility. MXene-based composites have proven to be promising candidates for flexible tactile sensors due to their excellent stretchability and metallic conductivity. Therefore, great efforts have been devoted to the development of MXene-based composites for flexible sensor applications. In this paper, the controllable preparation and characterization of MXene are introduced. Then, the recent progresses on fabrication strategies, operating mechanisms, and device performance of MXene composite-based flexible tactile sensors, including flexible piezoresistive sensors, capacitive sensors, piezoelectric sensors, triboelectric sensors are reviewed. After that, the applications of MXene material-based flexible electronics in human motion monitoring, healthcare, prosthetics, and artificial intelligence are discussed. Finally, the challenges and perspectives for MXene-based tactile sensors are summarized.

Synthesis and biological assessment of indole derivatives containing penta-heterocycles scaffold as novel anticancer agents towards A549 and K562 cells.

Herein, a new series of 2-chloro-N-(5-(2-oxoindolin-3-yl)-4H-pyrazol-3-yl) acetamide derivatives containing 1,3,4-thiadiazole (10a-i) and 4H-1,2,4-triazol-4-amine (11a-r) moiety was designed, synthesised as novel anticancer agents. The antiproliferative activity values indicated that compound 10 b stood as the most potent derivative with IC50 values of 12.0 nM and 10 nM against A549 and K562 cells, respectively. Mechanism investigation and docking studies of 10 b indicated that it possessed good apoptosis characteristic and dose-dependent growth arrest of A549 and K562 cells, blocked cell cycle into G2/M phase. Interestingly, 10 b suppressed the growth of A549 and K562 cells via modulation of EGFR and p53-MDM2 mediated pathway.

Conjugated Polymer-Based Nanocomposites for Pressure Sensors.

Flexible sensors are the essential foundations of pressure sensing, microcomputer sensing systems, and wearable devices. The flexible tactile sensor can sense stimuli by converting external forces into electrical signals. The electrical signals are transmitted to a computer processing system for analysis, realizing real-time health monitoring and human motion detection. According to the working mechanism, tactile sensors are mainly divided into four types-piezoresistive, capacitive, piezoelectric, and triboelectric tactile sensors. Conventional silicon-based tactile sensors are often inadequate for flexible electronics due to their limited mechanical flexibility. In comparison, polymeric nanocomposites are flexible and stretchable, which makes them excellent candidates for flexible and wearable tactile sensors. Among the promising polymers, conjugated polymers (CPs), due to their unique chemical structures and electronic properties that contribute to their high electrical and mechanical conductivity, show great potential for flexible sensors and wearable devices. In this paper, we first introduce the parameters of pressure sensors. Then, we describe the operating principles of resistive, capacitive, piezoelectric, and triboelectric sensors, and review the pressure sensors based on conjugated polymer nanocomposites that were reported in recent years. After that, we introduce the performance characteristics of flexible sensors, regarding their applications in healthcare, human motion monitoring, electronic skin, wearable devices, and artificial intelligence. In addition, we summarize and compare the performances of conjugated polymer nanocomposite-based pressure sensors that were reported in recent years. Finally, we summarize the challenges and future directions of conjugated polymer nanocomposite-based sensors.

Effect of Hydrogen-Consuming Compounds on In Vitro Ruminal Fermentation, Fatty Acids Profile, and Microbial Community in Water Buffalo.

The present study aimed to investigate the effect of hydrogen-consuming compounds on ruminal methane (CH4) production, in vitro fermentation parameters, fatty acids profile, and microbial community in water buffalo. Different sodium nitrate to disodium fumarate ratios [2:1 (F), 1:1 (S), 1:2 (T)] were studied in vitro by batch culture technique in the presence of linoleic acid. Results revealed that the dominant bacterial communities were not affected with sodium nitrate and disodium fumarate, whereas CH4 production and Verrucomicrobia, Succiniclasticum, norank_f__Muribaculaceae, and Prevotellaceae_UCG-003 were reduced (P < 0.05). However, ruminal pH, unsaturated fatty acids/saturated fatty acids (UFA/SFA) and Campilobacterota, Selenomonas, Succinivibrio, Oribacterium, Christensenellaceae_R-7_group, Campylobacter, Shuttleworthia, Schwartzia, and Prevotellaceae_YAB2003_group were increased (P < 0.05). Total volatile fatty acids (TVFA) and Spirochaetae, Fibrobacterota, Verrucomicrobia, Fibrobacter, Treponema, and Prevotellaceae were decreased in F (P < 0.05), but cis-9, trans-11CLA, acetate/propionate and Proteobacteria, Campilobacterota, Selenomonas, Succinivibrio, and Campylobacter were increased in F (P < 0.05). The highly selected bacterial genera in F were Campylobacter and Succinivibrio. The disodium fumarate, enhanced (P < 0.05) the TVFA, propionate, total bacteria, Butyrivibrio proteoclasticus, and Atypical butyrivibrio. The concentrations of C18:3n3, C20:3n6, C21:0, C22:2n6, and C22:1n9, as well as the populations of total fungi, protozoa, methanogens, Butyrivibrio hungatei in T were higher (P < 0.05). The highly selected bacterial genera in T were Fibrobacter and Treponema. Conclusively, the addition of sodium nitrate and disodium fumarate can reduce the CH4 production and optimize ruminal fatty acid composition. Furthermore, disodium fumarate can alleviate the adverse effect of sodium nitrate on the rumen fermentation.

Correlation between vaginal microbiota and different progression stages of cervical cancer.

The process from high-risk human papillomavirus (HR-HPV) infection to cervical cancer is a continuous and long-term process, but the pathogenesis of the whole process is not completely clear. Here, 59 Chinese women were engaged in this study, and divided into five groups: normal healthy group, HR-HPV infections group, low-grade intraepithelial neoplasia (LSIL) group, high-SIL(HSIL) group, and cervical cancer group. With the occurrence of HR-HPV infection and the development of cervical lesions, the diversity of vaginal microbiota species was increased, and the relative abundance of Lactobacillus (L.), the dominant bacteria in maintaining vaginal microecological balance, was decreased gradually. In contrast, the abundance of Actinobacteria in the four disease groups was significantly higher than that in normal group. Furthermore L. iners may be related to the serious progression of cervical cancer. After analyzing the whole process, we found that Gardnerella(G.), Atopobium(A.) and Dialister(D.) have important effects on both persistent HR-HPV infection and the pathogenesis of cervical cancer. In addition, PICRUSt2 and KEGG results showed that the KEGG pathways enriched by the predicted genes of vaginal microbiota in cancer group included metabolic diseases, endocrine system and immune systems when compared with that in normal group. These findings may provide insights into the pathogenesis of cervical cancer, and help to improve the early detection and prevention of cervical precancerous lesions.

Clinical application of exosomes and circulating microRNAs in the diagnosis of pregnancy complications and foetal abnormalities.

During pregnancy in humans, the physiology of the mother and foetus are finely regulated by many factors. Inappropriate regulation can result in pregnancy disorders, such as complications and foetal abnormalities. The early prediction or accurate diagnosis of related diseases is a concern of researchers. Liquid biopsy can be analysed for circulating cells, cell-free nucleic acids, and exosomes. Because exosomes can be detected in the peripheral blood of women in early pregnancy, these vesicles and their contents have become the focus of early prediction or diagnostic biomarker research on pregnancy complications and foetal developmental disorders. In this review, we focus on recent studies addressing the roles of peripheral blood exosomes and circulating miRNAs in pregnancy complications and in pregnancies with abnormal foetal developmental disorders, with particular attention paid to the potential application value of exosomes and circulating miRNAs as disease-specific biomarkers.

Melatonin rescues impaired penetration ability of human spermatozoa induced by mitochondrial dysfunction.

Fertilization failure often occurs during in vitro fertilization (IVF) cycles despite apparently normal sperm and oocytes. Accumulating evidence suggests that mitochondria play crucial roles in the regulation of sperm function and male fertility. 3-Nitrophthalic acid (3-NPA) can induce oxidative stress in mitochondria, and melatonin, as an antioxidant, can improve mitochondrial function by reducing mitochondrial oxidative stress. The role of sperm mitochondrial dysfunction in fertilization failure during IVF is unclear. The present study revealed that spermatozoa with low, or poor, fertilization rates had swollen mitochondria, increased mitochondria-derived ROS, and attenuated mitochondrial respiratory capacity. 3-NPA treatment enhanced mitochondrial dysfunction in sperm. Spermatozoa with poor fertilization rates, and spermatozoa treated with 3-NPA, had reduced penetration ability. The concentration of melatonin was decreased in semen samples with low and poor fertilization rates. Melatonin, not only decreased excessive mitochondria-derived ROS, but also 'rescued' the reduced penetration capacity of spermatozoa treated with 3-NPA. Taken together, the study suggested that mitochondria-derived ROS and mitochondrial respiratory capacity are independent bio-markers for sperm dysfunction, and melatonin may be useful in improving sperm quality and overall male fertility.

Intracellular osteopontin negatively regulates toll-like receptor 4-mediated inflammatory response via regulating GSK3ß and 4EBP1 phosphorylation.

Toll-like receptors (TLRs) play an important role in host defense against invading pathogens. By initiating a signal transduction cascade, TLRs lead to the release of pro-inflammatory cytokines. However, the inappropriate activation of TLR signaling could result in inflammatory disorders or autoimmune diseases. Osteopontin (OPN) has been reported to be an inflammatory cytokine participating in cell-mediated immunity. However, the role of OPN in TLR-mediated immune responses is poorly understood. In the present study, OPN-deficient (OPN-/-) macrophages exhibited significantly higher levels of pro-inflammatory cytokines after stimulation with lipopolysaccharide (LPS). Our study also demonstrated that the intracellular OPN (iOPN) isoform acted as a negative regulator to inhibit LPS-induced inflammatory responses. Compared to WT macrophages, OPN-/- macrophages had lower Akt phosphorylation levels and higher GSK3ß phosphorylation levels, which were downregulated by p-Akt. Moreover, as a down-stream target of Akt, 4EBP1 was hypo-phosphorylated in OPN-/- macrophages compared to 4EBP1 in WT macrophages. These findings reveal that iOPN can regulate GSK3ß and 4EBP1 phosphorylation to inhibit TLR4-mediated inflammatory responses.

Clonal spread and azole-resistant mechanisms of non-susceptible Candida albicans isolates from vulvovaginal candidiasis patients in three Shanghai maternity hospitals.

In our multicenter study, 43 fluconazole non-susceptible and 45 fluconazole-susceptible isolates were collected from vulvovaginal candidiasis (VVC) patients from three Shanghai maternity hospitals to analyze their molecular epidemiological features and fluconazole resistant mechanisms. Cross-resistance to fluconazole, itraconazole and voriconazole was observed in 53.5% of the nonsusceptible isolates. Though we acquired 12 clonal complexes (CCs) of diploid sequence types (DSTs) in clinical isolates by a multilocus sequence typing method, fluconazole nonsusceptible isolates all belonged to CC69 with a predominant genotype of DST 79. Increased expressions of efflux pump genes (CDR1, CDR2, and MDR1) were observed only in minor fluconazole non-susceptible isolates by real-time quantitative polymerase chain reaction (PCR). However, ERG11 genes of fluconazole SDD and resistant isolates had significantly higher expression levels than fluconazole-susceptible isolates. Moreover, 13 distinct amino acid substitutions in Erg11p were found in clinical isolates. Three of the substitutions were novel amino acid substitutions (T123I, P98S, and Y286D), which were not in the susceptible isolates. Only two heterozygous amino acid substitutions (A18P/A and R365G/R) in Erg3p were found in two isolates with cross-resistance to fluconazole, itraconazole, and voriconazole. Taken together, we observed the clonal spread of CC69 in fluconazole non-susceptible isolates of Candida albicans from VVC patients with the dominant genotype DST79. ERG11 gene mutations and overexpression predominantly contributed to fluconazole resistance instead of the more common increased expressions of efflux pump genes (CDR1, CDR2, and MDR1).

Application of double low dose combined low flow injection in coronary dual-source coronary computed tomography angiography.

PURPOSE: This study was aimed to explore the feasibility of lower tube voltage, low volumes of contrast medium, and low flow injection in prospective electrocardiogram (ECG)-triggered high-pitch dual-source coronary computed tomography angiography (CCTA) for coronary artery imaging. MATERIAL AND METHODS: A total of 140 patients with body mass index (BMI) ranging from 18.5 to 24.3 kg/m2 and heart rate (HR) lower than 65 times/min underwent CCTA were divided randomly into two groups. The enhanced CT value and noise as well as signal-to-noise ratio (SNR) and contrast-to-noise ratio (CNR) were calculated. Coronary artery was evaluated by double-blind method using a four-point grading scale. RESULTS: No significant differences were found in the average enhanced CT value, noise, SNR, and CNR of all segments between the two groups (P > .05). Meanwhile, effective radiation dosages in group A were markedly lower than those in group B (P < .01). CONCLUSION: The prospective ECG-triggered high-pitch dual-source CCTA with low voltage, contrast medium, and flow rate injection using sinogram affirmed iterative reconstruction is feasible which can observably reduce radiation and obtain satisfactory images.

Diagnostic Value of Serum hsa-mir-92a in Patients with Cervical Cancer.

BACKGROUND: Hsa-mir-92a acts as an onco-miRNA and may contribute to the progression and invasion of cervical cancer, which is a common malignant tumor in women worldwide. The objective of the present study was to evaluate whether serum hsa-mir-92a could serve as a diagnostic biomarker for cervical cancer patients. METHODS: The expression levels of hsa-mir-92a were analyzed in the serum of patients with CIN I, CIN II, CIN III, cervical cancer Ia - IIa and compared with those of the control group samples. The receiver operating characteristic (ROC) curve was used to evaluate the diagnostic significance of cervical cancer. RESULTS: It was found that the expression of hsa-miR-92a in the serum of individuals with CIN or cervical cancer was significantly higher than that in healthy volunteers (p < 0.01). The expression of hsa-miR-92a was higher in the serum of patients with advanced stage and cervical cancer than those with early stage. ROC analysis revealed that the cutoff value of hsa-mir-92a was 1.52 for the diagnosis of CIN and cervical cancer. The sensitivity and specificity were 69.6% and 80.4%, respectively, and an area under the curve (AUC) was 0.83. CONCLUSIONS: hsa-mir-92a up-regulation was associated with cervical cancer and the serum level of hsa-mir-92a could be used as an independent marker for the diagnosis of cervical cancer.

Antifungal susceptibility and molecular typing of 115 Candida albicans isolates obtained from vulvovaginal candidiasis patients in 3 Shanghai maternity hospitals.

In our multicenter study, we studied the distribution of Candida species in vulvovaginal candidiasis patients and investigated antifungal susceptibility profile and genotype of Candida albicans in vaginal swab. A total of 115 Candida albicans strains were detected in 135 clinical isolates. Minimum inhibitory concentration determinations showed that 83% and 81% of the 115 Candida albicans strains were susceptible to fluconazole and voriconazole. Randomly amplified polymorphic DNA analysis (RAPD) was applied to identify clonally related isolates from different patients at the local level. All tested strains were classified into genotype A (77.4%), genotype B (18.3%), and genotype C (4.3%). Genotype A was further classified into five subtypes and genotype B into two subtypes.Candida albicans was the dominant pathogen of vulvovaginal candidiasis, the majority belonging to genotype A in this study. Exposure to azoles is a risk factor for the emergence of azole resistance among Candida albicans isolated from VVC patients.

Reticular Origami Soft Robotic Gripper for Shape-Adaptive and Bistable Rapid Grasping.

The top-down approach in designing and fabricating origami robots could achieve far more complicated functions with compliant and elegant designs than traditional robots. This study presents the design, fabrication, and testing of a reticular origami soft robotic gripper that could adapt to the shape of the grasping subject and grasp the subject within 80 ms from the trigger instance. A sensing mechanism consisting of the resistive pressure sensor array and flexible elongation sensor is designed to validate further the shape-adaptive grasping capability and model the rough shape and size of the subject. The grasping test on various objects with different shapes, surface textures, sizes, and living animals further validates the excellent grasping capabilities of the gripper. The gripper could be either actively triggered by actuation or passively triggered by a minimum of 0.0014 J disturbance energy. Such features make it particularly suitable for applications such as capturing underwater creatures and illegal drone control.

Neuromorphic Computing of Optoelectronic Artificial BFCO/AZO Heterostructure Memristors Synapses.

Compared with purely electrical neuromorphic devices, those stimulated by optical signals have gained increasing attention due to their realistic sensory simulation. In this work, an optoelectronic neuromorphic device based on a photoelectric memristor with a Bi2FeCrO6/Al-doped ZnO (BFCO/AZO) heterostructure is fabricated that can respond to both electrical and optical signals and successfully simulate a variety of synaptic behaviors, such as STP, LTP, and PPF. In addition, the photomemory mechanism was identified by analyzing the energy band structures of AZO and BFCO. A convolutional neural network (CNN) architecture for pattern classification at the Mixed National Institute of Standards and Technology (MNIST) was used and improved the recognition accuracy of the MNIST and Fashion-MNIST datasets to 95.21% and 74.19%, respectively, by implementing an improved stochastic adaptive algorithm. These results provide a feasible approach for future implementation of optoelectronic synapses.

New-Style Logic Operation and Neuromorphic Computing Enabled by Optoelectronic Artificial Synapses in an MXene/Y:HfO2 Ferroelectric Memristor.

Today's computing systems, to meet the enormous demands of information processing, have driven the development of brain-inspired neuromorphic systems. However, there are relatively few optoelectronic devices in most brain-inspired neuromorphic systems that can simultaneously regulate the conductivity through both optical and electrical signals. In this work, the Au/MXene/Y:HfO2/FTO ferroelectric memristor as an optoelectronic artificial synaptic device exhibited both digital and analog resistance switching (RS) behaviors under different voltages with a good switching ratio (>103). Under optoelectronic conditions, optimal weight update parameters and an enhanced algorithm achieved 97.1% recognition accuracy in convolutional neural networks. A new logic gate circuit specifically designed for optoelectronic inputs was established. Furthermore, the device integrates the impact of relative humidity to develop an innovative three-person voting mechanism with a veto power. These results provide a feasible approach for integrating optoelectronic artificial synapses with logic-based computing devices.