Methanol recovery: potential of nanolaminate organic solvent nanofiltration (OSN) membranes.

Researchers have made a significant breakthrough by merging the energy-saving attribute of organic solvent nanofiltration (OSN) with the remarkable solvent permeance and solute rejection of two-dimensional (2D) laminated membranes. This innovative approach brings forth a new era of sustainable and cost-effective separation techniques, presenting a promising solution to the issue of industrial solvents contaminating the environment. This development paves the way for new opportunities in building a sustainable future. Specifically, our mini-review has cast a spotlight on the separation and recovery of methanol-a solvent abundantly used in industrial processes. We systematically evaluated a diverse array of free-standing 2D nanolaminate OSN membranes. The analysis encompasses the assessment of pure methanol permeance, solute rejection capabilities, and the simultaneous evaluation of methanol permeance and solute rejection performance. Notably, this study sheds light on the considerable potential of 2D laminated OSN membranes in revolutionizing separation processes for the industrial use of methanol.

Desalination Potential of Aquaporin-Inspired Functionalization of Carbon Nanotubes: Bridging Between Simulation and Experiment.

Outstanding water/ion selectivity of aquaporins paves the way for bioinspired desalination membranes. Since the amino acid asparagine (Asn) plays a critical role in the fast water conduction of aquaporins through hydrogen bonding interactions, we adapted this feature by functionalizing carbon nanotubes (CNTs) with Asn. We also studied a nonpolar amino acid and carboxylate functional groups for comparison. Computation of the ideal performance of individual CNTs at atomistic scale is a powerful tool for probing the effect of tip-functionalized CNTs on water and ion transport mechanism. Molecular simulation study suggests that steric effects required for ion rejection compromise fast water conductivity; however, an Asn functional group having polarity and hydrogen bonding capability can be used to balance this trade-off to some extent. To test our hypothesis, we incorporated functionalized CNTs (f-CNTs) into the in situ polymerized selective polyamide (PA) layer of thin film nanocomposite membranes and compared their experimental RO desalination performance. The f-CNTs were found to change the separation environment through modification of cross-linking density, thickness, and hydrophilicity of the PA layer. Asn functionalization led to more cross-linked and thinner PA layer while hydrophilicity is improved compared to other functional groups. Accordingly, water permeance is increased by 25% relative to neat PA with a salt rejection above 98%. Starting from the nanomaterial itself and benefiting from molecular simulation, it is possible to design superior membranes suited for practical applications.

MXene Materials for Designing Advanced Separation Membranes.

MXenes are emerging rapidly as a new family of multifunctional nanomaterials with prospective applications rivaling that of graphenes. Herein, a timely account of the design and performance evaluation of MXene-based membranes is provided. First, the preparation and physicochemical characteristics of MXenes are outlined, with a focus on exfoliation, dispersion stability, and processability, which are crucial factors for membrane fabrication. Then, different formats of MXene-based membranes in the literature are introduced, comprising pristine or intercalated nanolaminates and polymer-based nanocomposites. Next, the major membrane processes so far pursued by MXenes are evaluated, covering gas separation, wastewater treatment, desalination, and organic solvent purification. The potential utility of MXenes in phase inversion and interfacial polymerization, as well as layer-by-layer assembly for the preparation of nanocomposite membranes, is also critically discussed. Looking forward, exploiting the high electrical conductivity and catalytic activity of certain MXenes is put into perspective for niche applications that are not easily achievable by other nanomaterials. Furthermore, the benefits of simulation/modeling approaches for designing MXene-based membranes are exemplified. Overall, critical insights are provided for materials science and membrane communities to navigate better while exploring the potential of MXenes for developing advanced separation membranes.

Highly CO2 Selective Microporous Metal-Imidazolate Framework-Based Mixed Matrix Membranes.

Microporous metal-imidazolate framework (MMIF), a highly CO2 selective MOF, was incoporated into a polymeric membrane for separation of CO2 from CH4 and N2 for the first time. MMIF nanoparticles of 50-200 nm were synthesized using the sonication method and dispersed into Matrimid, a commercial polyimide, with MOF loading of 10% and 20% by weight to fabricate mixed matrix membranes (MMMs). Morphology, thermal behavior, and glass transition temperature of the membranes were characterized, and single and mixed gas permeation measurements at 35 °C and 4 bar feed pressure were carried out to reveal their separation performance. Both 10% and 20% MMIF containing Matrimid membranes exhibited enhanced gas permeabilities for all three gases. Contrary to expectations, ideal selectivity of membranes was not improved possibly due to the flexible framework of MMIF. On the other hand, mixed gas permeability measurements showed significant improvement in CO2/CH4 separation factor by 130% and CO2/N2 separation factor by 79% due to competitive adsorption favoring CO2.

Solvation of a Cellulose Microfibril in Imidazolium Acetate Ionic Liquids: Effect of a Cosolvent.

The solvation and the onset of dissolution of a cellulose I(ß) microcrystal in ionic liquid media are studied by molecular simulation. Ionic liquids can dissolve large amounts of cellulose, which can later be regenerated from solution, but their high viscosity is an inconvenience. Hydrogen bonding between the anion of the ionic liquid and cellulose is the main aspect determining dissolution. Here we try to elucidate the role of a molecular cosolvent, dimethyl sulfoxide (DMSO), which is an aprotic polar compound, in the system composed of cellulose and the ionic liquid 1-butyl-3-methylimidazolium acetate. We calculated quantities related to specific interactions (mainly hydrogen bonds), conformations, and the structure of local solvation environments, both for a solvated oligomer chain of cellulose and for a model microfibril composed of 36 chains in the I(ß) crystal structure. We compare two solvent systems: the pure ionic liquid and a mixed solvent with an equimolar composition in ionic liquid and DMSO. All entities are represented by detailed all-atom, fully flexible force fields. The main conclusions are that DMSO behaves as an "innocent" cosolvent, lowering the viscosity and accelerating mass transport in the system, but without interacting specifically with cellulose or disrupting the interactions between cellulose with the anions of the ionic liquid. An understanding of solvation in mixed solvents composed of ionic liquids and molecular compounds can enable the design of high-performance media for the use of biomass materials.

Fatty acid-based polyurethane films for wound dressing applications.

Fatty acid-based polyurethane films were prepared for use as potential wound dressing material. The polymerization reaction was carried out with or without catalyst. Polymer films were prepared by casting-evaporation technique with or without crosslink-catalyst. The film prepared from uncatalyzed reaction product with crosslink-catalyst gave slightly higher crosslink density. The mechanical tests showed that, the increase in the tensile strength and decrease in the elongation at break is due to the increase in the degree of crosslinking. All films were flexible, and resisted to acid solution. The films prepared without crosslink-catalyst were more hydrophilic, absorbed more water. The highest permeability values were generally obtained for the films prepared without crosslink catalyst. Both the direct contact method and the MMT test were applied for determination of cytotoxicity of polymer films and the polyurethane film prepared from uncatalyzed reaction product without crosslink-catalyst showed better biocompatibility property, closest to the commercial product, Opsite.