RESUMO
To rapidly remove dyes from wastewater, iron-based metal-organic frameworks modified with phenolated lignin (NH2-MIL@L) were prepared by a one-step hydrothermal method. Analyses of the chemical structure and adsorption mechanism of the NH2-MIL@L proved the successful introduction of lignin and the enhancement of its adsorption sites. Compared with NH2-MIL-101-Fe without phenolated lignin, the modification with lignin increased the methyl orange (MO) adsorption rate of NH2-MIL@L. For the best adsorbent, NH2-MIL@L4, the MO adsorption efficiency in MO solution reached 95.09% within 5 min. NH2-MIL@L4 reached adsorption equilibrium within 90 min, exhibiting an MO adsorption capacity of 195.31 mg/g. The process followed pseudo-second-order kinetics and the Dubinin-Radushkevich model. MO adsorption efficiency of NH2-MIL@L4 was maintained at 89.87% after six adsorption-desorption cycles. In mixed solutions of MO and methylene blue (MB), NH2-MIL@L4 achieved an MO adsorption of 94.02% at 5 min and reached MO adsorption equilibrium within 15 min with an MO adsorption capacity of 438.6 mg/g, while the MB adsorption equilibrium was established at 90 min with an MB adsorption rate and capacity of 95.60% and 481.34 mg/g, respectively. NH2-MIL@L4 sustained its excellent adsorption efficiency after six adsorption-desorption cycles (91.2% for MO and 93.4% for MB). The process of MO adsorption by NH2-MIL@L4 followed the Temkin model and pseudo-second-order kinetics, while MB adsorption followed the Dubinin-Radushkevich model and pseudo-second-order kinetics. Electrostatic interactions, π-π interactions, hydrogen bonding, and synergistic interactions affected the MO adsorption process of NH2-MIL@L4.
Assuntos
Compostos Azo , Lignina , Poluentes Químicos da Água , Adsorção , Lignina/química , Compostos Azo/química , Poluentes Químicos da Água/química , Poluentes Químicos da Água/análise , Estruturas Metalorgânicas/química , Cinética , Ferro/química , Corantes/químicaRESUMO
Using the surface molecular imprinting technique, a thermo-sensitive molecularly imprinted fluorescent sensor was constructed for bovine hemoglobin (BHb) detection with the silanized carbon dots (CD@SiO2) as fluorescent signal, N-isopropylacrylamide as monomer sensitive to temperature, and BHb as template. The silanized carbon dots coated by the molecularly imprinted polymer (CD@SiO2@MIP) were characterized by high-resolution transmission electron microscopy, Fourier transform infrared spectroscopy, and fluorescence spectroscopy. Owing to the combination of the strong fluorescence sensitivity of CDs and the high selectivity of the molecular imprinting shell, the prepared sensor showed good recognition and detection performance to the target protein BHb, with a linear range of 0.31-1.55 µM and a detection limit of 1.55 µM. Furthermore, the sensor was utilized to detect the content of BHb in real urine with a recovery of 98.6-100.5%. The CD@SiO2@MIP sensors present a high potential for applications in the detection of BHb in biological systems. Graphical abstract.
Assuntos
Carbono/química , Hemoglobinas/análise , Impressão Molecular/métodos , Silanos/química , Espectrometria de Fluorescência/métodos , Adsorção , Animais , Bovinos , Limite de Detecção , Urina/químicaRESUMO
Cellulosic hydrogels are widely used in various applications, as they are natural raw materials and have excellent degradability. However, their poor mechanical properties restrict their practical application. This study presents a facile approach for fabricating cellulosic hydrogels with high strength by synergistically utilizing salting-out and ionic coordination, thereby inducing the collapse and aggregation of cellulose chains to form a cross-linked network structure. Cellulosic hydrogels are prepared by soaking cellulose in an Al2(SO4)3 solution, which is both strong (compressive strength of up to 16.99 MPa) and tough (compressive toughness of up to 2.86 MJ/m3). The prepared cellulosic hydrogels exhibit resistance to swelling in different solutions and good biodegradability in soil. The cellulosic hydrogels are incorporated into strain sensors for human-motion monitoring by introducing AgNWs. Thus, the study offers a promising, simple, and scalable approach for preparing strong, degradable, and anti-swelling hydrogels using common biomass resources with considerable potential for various applications.
Assuntos
Celulose , Hidrogéis , Hidrogéis/química , Celulose/química , Força Compressiva , Humanos , Íons/químicaRESUMO
Thermosetting foams have limited capabilities for recycling, reprocessing, or reshaping. Moreover, most of the foaming agents currently employed in these foams are derived from organic compounds sourced from petrochemicals, thereby posing a significant environmental threat due to heightened pollution. To solve these problems, a fully biobased degradable vitrimer foam (EPC-X) was fabricated using an environmentally friendly all-in-one foaming strategy by cross-linking epoxidized malepimaric anhydride (EMPA), 1,5-diaminopentane (PDA), and 1,5-diaminopentane carbamate (PDAC) as a latent curing-blowing agent. To our delight, the vitrimer foams exhibit excellent mechanical properties (2.86 ± 0.11 MPa compressive strength) owing to their unique rigid rosin backbone and cross-linking networks. The presence of dynamic ß-hydroxy ester bonds and the self-catalytic behavior of tertiary amine groups facilitate network rearrangement without requiring additional catalysts, thereby resulting in the development of EPC-X with rapid self-healing and shape memory properties. The self-healing foam could support a weight of 500 g (approximately 562 times its own mass). Moreover, these high-performance vitrimer foams can also be easily degraded in an ethanolamine (EA) or NaOH solution under mild conditions. Such a design strategy offers an alternative approach for developing superior degradable and thermal stimuli-responsive thermosetting foams.
RESUMO
Human amniotic epithelial cells (hAECs) are a useful and noncontroversial source of stem cells for cell therapy and regenerative medicine, but their limited proliferative ability hinders the acquisition of adequate quantities of cells for clinical use due to not expressing telomerase in hAECs. Our previous study showed that hyaluronic acid (HA), an important component of the extracellular matrix, promoted the proliferation of human amniotic mesenchymal stem cells. Herein, we hypothesize that HA might improve the proliferative capability of hAECs. In the present study, the role of HA on the proliferation of human amniotic epithelial cells (hAECs) in vitro was investigated for the first time. HA at molecular weight of 300 kDa showed an obvious pro-proliferation effect on hAECs. Furthermore, HA not only kept phenotypic characteristics and differentiation capabilities of hAECs, but significantly promoted the secretion of the anti-inflammatory factors such as IL-10 and TGF-ß1, and the expression of stem cell pluripotent factors such as Oct4 and Nanog. Analysis of PCR microarray data and RT-qPCR validation showed that TGF-ß/BMP signaling was activated in the presence of HA. Further study showed that SB431542, an inhibitor of the TGF-ß/BMP signaling, significantly suppressed the mRNA expression of TGFBR3, BMP4, BMP7, BMPR1B, SMAD3, SMAD4, and the pro-proliferative effect of HA on hAECs. These data suggest that HA is a safe and effective enhancer for in vitro expansion of hAECs, whose regulatory mechanism involves the TGF-ß/BMP signaling.