RESUMO
Computer simulations play an important role in a range of biomedical engineering applications. Thus, it is important that biomedical engineering students engage with modeling in their undergraduate education and establish an understanding of its practice. In addition, computational tools enhance active learning and complement standard pedagogical approaches to promote student understanding of course content. Herein, we describe the development and implementation of learning modules for computational modeling and simulation (CM&S) within an undergraduate biomechanics course. We developed four CM&S learning modules that targeted predefined course goals and learning outcomes within the febio studio software. For each module, students were guided through CM&S tutorials and tasked to construct and analyze more advanced models to assess learning and competency and evaluate module effectiveness. Results showed that students demonstrated an increased interest in CM&S through module progression and that modules promoted the understanding of course content. In addition, students exhibited increased understanding and competency in finite element model development and simulation software use. Lastly, it was evident that students recognized the importance of coupling theory, experiments, and modeling and understood the importance of CM&S in biomedical engineering and its broad application. Our findings suggest that integrating well-designed CM&S modules into undergraduate biomedical engineering education holds much promise in supporting student learning experiences and introducing students to modern engineering tools relevant to professional development.
Assuntos
Currículo , Estudantes , Humanos , Fenômenos Biomecânicos , Software , Simulação por ComputadorRESUMO
Wall shear stress (WSS) is an important mediator of cardiovascular pathologies and there is a need for its reliable evaluation as a potential prognostic indicator. The purpose of this work was to develop a method that quantifies WSS from two-dimensional (2D) phase contrast magnetic resonance (PCMR) imaging derived flow waveforms, apply this method to PCMR data acquired in the abdominal aorta of healthy volunteers, and to compare PCMR-derived WSS values to values predicted from a computational fluid dynamics (CFD) simulation. The method uses PCMR-derived flow versus time waveforms constrained by the Womersley solution for pulsatile flow in a cylindrical tube. The method was evaluated for sensitivity to input parameters, intrastudy repeatability and was compared with results from a patient-specific CFD simulation. 2D-PCMR data were acquired in the aortas of healthy men (n = 12) and women (n = 15) and time-averaged WSS (TAWSS) was compared. Agreement was observed when comparing TAWSS between CFD and the PCMR flow-based method with a correlation coefficient of 0.88 (CFD: 15.0 ± 1.9 versus MRI: 13.5 ± 2.4 dyn/cm2) though comparison of WSS values between the PCMR-based method and CFD predictions indicate that the PCMR method underestimated instantaneous WSS by 3.7 ± 7.6 dyn/cm2. We found no significant difference in TAWSS magnitude between the sexes; 8.19 ± 2.25 versus 8.07 ± 1.71 dyn/cm2, p = 0.16 for men and women, respectively.
Assuntos
Aorta Abdominal , Modelos Cardiovasculares , Aorta Abdominal/diagnóstico por imagem , Velocidade do Fluxo Sanguíneo , Feminino , Humanos , Imageamento por Ressonância Magnética , Masculino , Estresse MecânicoRESUMO
This study presents a framework for plasticity and elastoplastic damage mechanics by treating materials as reactive solids whose internal composition evolves in response to applied loading. Using the framework of constrained reactive mixtures, plastic deformation is accounted for by allowing loaded bonds within the material to break and reform in a stressed state. Bonds which break and reform represent a new generation with a new reference configuration, which is time-invariant and provided by constitutive assumption. The constitutive relation for the reference configuration of each generation may depend on the selection of a suitable yield measure. The choice of this measure and the resulting plastic flow conditions are constrained by the Clausius-Duhem inequality. We show that this framework remains consistent with classical plasticity approaches and principles. Verification of this reactive plasticity framework, which is implemented in the open source FEBio finite element software (febio.org), is performed against standard 2D and 3D benchmark problems. Damage is incorporated into this reactive framework by allowing loaded bonds to break permanently according to a suitable damage measure, where broken bonds can no longer store free energy. Validation is also demonstrated against experimental data for problems involving plasticity and plastic damage. This study demonstrates that it is possible to formulate simple elastoplasticity and elastoplastic damage models within a consistent framework which uses measures of material mass composition as theoretically observable state variables. This theoretical frame can be expanded in scope to account for more complex behaviors.
RESUMO
AIMS: The focal distribution of atherosclerotic plaques suggests that local biomechanical factors may influence plaque development. METHODS AND RESULTS: We studied 40 patients at baseline and over 12 months by virtual-histology intravascular ultrasound and bi-plane coronary angiography. We calculated plaque structural stress (PSS), defined as the mean of the maximum principal stress at the peri-luminal region, and wall shear stress (WSS), defined as the parallel frictional force exerted by blood flow on the endothelial surface, in areas undergoing progression or regression. Changes in plaque area, plaque burden (PB), necrotic core (NC), fibrous tissue (FT), fibrofatty tissue, and dense calcium were calculated for each co-registered frame. A total of 4029 co-registered frames were generated. In areas with progression, high PSS was associated with larger increases in NC and small increases in FT vs. low PSS (difference in ΔNC: 0.24 ± 0.06 mm2; P < 0.0001, difference in ΔFT: -0.15 ± 0.08 mm2; P = 0.049). In areas with regression, high PSS was associated with increased NC and decreased FT (difference in ΔNC: 0.15 ± 0.04; P = 0.0005, difference in ΔFT: -0.31 ± 0.06 mm2; P < 0.0001). Low WSS was associated with increased PB vs. high WSS in areas with progression (difference in ΔPB: 3.3 ± 0.4%; P < 0.001) with a similar pattern observed in areas with regression (difference in ΔPB: 1.2 ± 0.4%; P = 0.004). Plaque structural stress and WSS were largely independent of each other (R2 = 0.002; P = 0.001). CONCLUSION: Areas with high PSS are associated with compositional changes consistent with increased plaque vulnerability. Areas with low WSS are associated with more plaque growth in areas that progress and less plaque loss in areas that regress. The interplay of PSS and WSS may govern important changes in plaque size and composition.
Assuntos
Vasos Coronários/patologia , Hemodinâmica/fisiologia , Placa Aterosclerótica/diagnóstico por imagem , Ultrassonografia de Intervenção/instrumentação , Fenômenos Biomecânicos , Angiografia Coronária/métodos , Doença da Artéria Coronariana/fisiopatologia , Progressão da Doença , Humanos , Necrose/patologia , Estresse MecânicoRESUMO
BACKGROUND: Arterial stiffness and wall shear stress are powerful determinants of cardiovascular health, and arterial stiffness is associated with increased cardiovascular mortality. Low and oscillatory wall shear stress, termed disturbed flow (d-flow), promotes atherosclerotic arterial remodeling, but the relationship between d-flow and arterial stiffness is not well understood. The objective of this study was to define the role of d-flow on arterial stiffening and discover the relevant signaling pathways by which d-flow stiffens arteries. METHODS: D-flow was induced in the carotid arteries of young and old mice of both sexes. Arterial stiffness was quantified ex vivo with cylindrical biaxial mechanical testing and in vivo from duplex ultrasound and compared with unmanipulated carotid arteries from 80-week-old mice. Gene expression and pathway analysis was performed on endothelial cell-enriched RNA and validated by immunohistochemistry. In vitro testing of signaling pathways was performed under oscillatory and laminar wall shear stress conditions. Human arteries from regions of d-flow and stable flow were tested ex vivo to validate critical results from the animal model. RESULTS: D-flow induced arterial stiffening through collagen deposition after partial carotid ligation, and the degree of stiffening was similar to that of unmanipulated carotid arteries from 80-week-old mice. Intimal gene pathway analyses identified transforming growth factor-ß pathways as having a prominent role in this stiffened arterial response, but this was attributable to thrombospondin-1 (TSP-1) stimulation of profibrotic genes and not changes to transforming growth factor-ß. In vitro and in vivo testing under d-flow conditions identified a possible role for TSP-1 activation of transforming growth factor-ß in the upregulation of these genes. TSP-1 knockout animals had significantly less arterial stiffening in response to d-flow than wild-type carotid arteries. Human arteries exposed to d-flow had similar increases TSP-1 and collagen gene expression as seen in our model. CONCLUSIONS: TSP-1 has a critical role in shear-mediated arterial stiffening that is mediated in part through TSP-1's activation of the profibrotic signaling pathways of transforming growth factor-ß. Molecular targets in this pathway may lead to novel therapies to limit arterial stiffening and the progression of disease in arteries exposed to d-flow.
Assuntos
Trombospondina 1/metabolismo , Rigidez Vascular/fisiologia , Envelhecimento , Animais , Remodelamento Atrial , Artérias Carótidas/metabolismo , Artérias Carótidas/fisiopatologia , Linhagem Celular , Colágeno/genética , Colágeno/metabolismo , Modelos Animais de Doenças , Regulação para Baixo , Endotélio Vascular/citologia , Endotélio Vascular/metabolismo , Feminino , Humanos , Imuno-Histoquímica , Masculino , Camundongos , Camundongos Endogâmicos C57BL , Camundongos Knockout , Proteínas Serina-Treonina Quinases/genética , Proteínas Serina-Treonina Quinases/metabolismo , RNA Ribossômico 18S/metabolismo , Receptor do Fator de Crescimento Transformador beta Tipo I , Receptores de Fatores de Crescimento Transformadores beta/genética , Receptores de Fatores de Crescimento Transformadores beta/metabolismo , Resistência ao Cisalhamento , Trombospondina 1/deficiência , Trombospondina 1/genética , Fator de Crescimento Transformador beta/metabolismoRESUMO
OBJECTIVE: Peripheral arterial disease (PAD) is a significant age-related medical condition with limited pharmacologic options. Severe PAD, termed critical limb ischemia, can lead to amputation. Skeletal muscle is the end organ most affected by PAD, leading to ischemic myopathy and debility of the patient. Currently, there are not any therapeutics to treat ischemic myopathy, and proposed biologic agents have not been optimized owing to a lack of preclinical models of PAD. Because a large animal model of ischemic myopathy may be useful in defining the optimal dosing and delivery regimens, the objective was to create and to characterize a swine model of ischemic myopathy that mimics patients with severe PAD. METHODS: Yorkshire swine (N = 8) underwent acute right hindlimb ischemia by endovascular occlusion of the external iliac artery. The effect of ischemia on limb function, perfusion, and degree of ischemic myopathy was quantified by weekly gait analysis, arteriography, hindlimb blood pressures, femoral artery duplex ultrasound scans, and histologic examination. Animals were terminated at 5 (n = 5) and 6 (n = 3) weeks postoperatively. Ossabaw swine (N = 8) fed a high-fat diet were used as a model of metabolic syndrome for comparison of arteriogenic recovery and validation of ischemic myopathy. RESULTS: There was persistent ischemia in the right hindlimb, and occlusion pressures were significantly depressed compared with the untreated left hindlimb out to 6 weeks (systolic blood pressure, 31 ± 21 vs 83 ± 15 mm Hg, respectively; P = .0007). The blood pressure reduction resulted in a significant increase of ischemic myopathy in the gastrocnemius muscle in the treated limb. Gait analysis revealed a functional deficit of the right hindlimb immediately after occlusion that improved rapidly during the first 2 weeks. Peak systolic velocity values in the right common femoral artery were severely diminished throughout the entire study (P < .001), and the hemodynamic environment after occlusion was characterized by low and oscillatory wall shear stress. Finally, the internal iliac artery on the side of the ischemic limb underwent significant arteriogenic remodeling (1.8× baseline) in the Yorkshire but not in the Ossabaw swine model. CONCLUSIONS: This model uses endovascular technology to produce the first durable large animal model of ischemic myopathy. Acutely (first 2 weeks), this model is associated with impaired gait but no tissue loss. Chronically (2-6 weeks), this model delivers persistent ischemia, resulting in ischemic myopathy similar to that seen in PAD patients. This model may be of use for testing novel therapeutics including biologic therapies for promoting neovascularization and arteriogenesis.
Assuntos
Procedimentos Endovasculares , Artéria Femoral/fisiopatologia , Hemodinâmica , Artéria Ilíaca/fisiopatologia , Isquemia/etiologia , Músculo Esquelético/irrigação sanguínea , Doença Arterial Periférica/etiologia , Angiografia , Animais , Velocidade do Fluxo Sanguíneo , Constrição Patológica , Modelos Animais de Doenças , Procedimentos Endovasculares/instrumentação , Feminino , Artéria Femoral/diagnóstico por imagem , Artéria Femoral/patologia , Marcha , Membro Posterior , Humanos , Artéria Ilíaca/diagnóstico por imagem , Artéria Ilíaca/patologia , Isquemia/diagnóstico por imagem , Isquemia/patologia , Isquemia/fisiopatologia , Músculo Esquelético/patologia , Músculo Esquelético/fisiopatologia , Doença Arterial Periférica/diagnóstico por imagem , Doença Arterial Periférica/patologia , Doença Arterial Periférica/fisiopatologia , Fluxo Sanguíneo Regional , Índice de Gravidade de Doença , Stents , Sus scrofa , Fatores de Tempo , Ultrassonografia Doppler Dupla , Remodelação VascularRESUMO
BACKGROUND: Quantitative and qualitative differences in the hemostatic systems exist between neonates and adults, including the presence of "fetal" fibrinogen, a qualitatively dysfunctional form of fibrinogen that exists until 1 yr of age. The consequences of "fetal" fibrinogen on clot structure in neonates, particularly in the context of surgery-associated bleeding, have not been well characterized. Here, the authors examine the sequential changes in clotting components and resultant clot structure in a small sample of neonates undergoing cardiac surgery and cardiopulmonary bypass (CPB). METHODS: Blood samples were collected from neonates (n = 10) before surgery, immediately after CPB, and after the transfusion of cryoprecipitate (i.e., adult fibrinogen component). Clots were formed from patient samples or purified neonatal and adult fibrinogen. Clot structure was analyzed using confocal microscopy. RESULTS: Clots formed from plasma obtained after CPB and after transfusion were more porous than baseline clots. Analysis of clots formed from purified neonatal and adult fibrinogen demonstrated that at equivalent fibrinogen concentrations, neonatal clots lack three-dimensional structure, whereas adult clots were denser with significant three-dimensional structure. Clots formed from a combination of purified neonatal and adult fibrinogen were less homogenous than those formed from either purified adult or neonatal fibrinogen. CONCLUSIONS: The results of this study confirm that significant differences exist in clot structure between neonates and adults and that neonatal and adult fibrinogen may not integrate well. These findings suggest that differential treatment strategies for neonates should be pursued to reduce the demonstrated morbidity of blood product transfusion.
Assuntos
Ponte Cardiopulmonar/efeitos adversos , Fibrina , Adulto , Coagulação Sanguínea , Perda Sanguínea Cirúrgica , Transfusão de Sangue , Fator XIII/análise , Feminino , Fibrinogênio/metabolismo , Humanos , Lactente , Recém-Nascido , Masculino , Microscopia Confocal , Protrombina/análiseRESUMO
BACKGROUND: Wall shear stress (WSS) has been associated with sites of plaque localization and with changes in plaque composition in human coronary arteries. Different values have been suggested for categorizing WSS as low, physiologic or high; however, uncertainties in flow rates, both across subjects and within a given individual, can affect the classification of WSS and thus influence the observed relationships between local hemodynamics and plaque changes over time. This study examines the effects of uncertainties in flow rate boundary conditions upon WSS values and investigates the influence of this variability on the observed associations of WSS with changes in VH-IVUS derived plaque components. METHODS: Three patients with coronary artery disease underwent baseline and 12 month follow-up angiography and virtual histology-intravascular ultrasound (VH-IVUS) measurements. Coronary artery models were reconstructed from the data and models with and without side-branches were created. Patient-specific Doppler ultrasound (DUS) data were employed as inflow boundary conditions and computational fluid dynamics was used to calculate the WSS in each model. Further, the influence of representative coronary artery flow waveforms upon WSS values was investigated and the concept of treating WSS using relative, rather than actual, values was explored. RESULTS: Models that included side-branch outflows and subject-specific DUS velocities were considered to be the reference cases. Hemodynamic differences were caused by the exclusion of side-branches and by imposing alternative velocity waveforms. One patient with fewer side-branches and a scaled generic waveform had little deviation from the reference case, while another patient with several side-branches excluded showed much larger departures from the reference situation. Differences between models and the respective reference cases were reduced when data were analyzed using relative, rather than actual, WSS. CONCLUSIONS: When considering individual subjects, large variations in patient-specific flow rates and exclusion of multiple side-branches in computational models can cause significant differences in observed associations between plaque evolution and ranges of computed WSS. These differences may contribute to the large variability typically found among subjects in pooled populations. Relative WSS may be more useful than actual WSS as a correlative variable when there is a large degree of uncertainty in flow rate data.
Assuntos
Vasos Coronários/patologia , Vasos Coronários/fisiopatologia , Progressão da Doença , Modelagem Computacional Específica para o Paciente , Placa Aterosclerótica/patologia , Placa Aterosclerótica/fisiopatologia , Estresse Mecânico , Hemodinâmica , Humanos , Placa Aterosclerótica/diagnóstico por imagem , UltrassonografiaAssuntos
Vasos Coronários , Hemodinâmica/fisiologia , Modelos Cardiovasculares , Fenômenos Biomecânicos/fisiologia , Doença da Artéria Coronariana/diagnóstico por imagem , Doença da Artéria Coronariana/fisiopatologia , Vasos Coronários/diagnóstico por imagem , Vasos Coronários/fisiologia , Hemorreologia/fisiologia , Humanos , Imageamento Tridimensional , Estresse MecânicoRESUMO
Central to the clinical adoption of patient-specific modeling strategies is demonstrating that simulation results are reliable and safe. Indeed, simulation frameworks must be robust to uncertainty in model input(s), and levels of confidence should accompany results. In this study, we applied a coupled uncertainty quantification-finite element (FE) framework to understand the impact of uncertainty in vascular material properties on variability in predicted stresses. Univariate probability distributions were fit to material parameters derived from layer-specific mechanical behavior testing of human coronary tissue. Parameters were assumed to be probabilistically independent, allowing for efficient parameter ensemble sampling. In an idealized coronary artery geometry, a forward FE model for each parameter ensemble was created to predict tissue stresses under physiologic loading. An emulator was constructed within the UncertainSCI software using polynomial chaos techniques, and statistics and sensitivities were directly computed. Results demonstrated that material parameter uncertainty propagates to variability in predicted stresses across the vessel wall, with the largest dispersions in stress within the adventitial layer. Variability in stress was most sensitive to uncertainties in the anisotropic component of the strain energy function. Moreover, unary and binary interactions within the adventitial layer were the main contributors to stress variance, and the leading factor in stress variability was uncertainty in the stress-like material parameter that describes the contribution of the embedded fibers to the overall artery stiffness. Results from a patient-specific coronary model confirmed many of these findings. Collectively, these data highlight the impact of material property variation on uncertainty in predicted artery stresses and present a pipeline to explore and characterize forward model uncertainty in computational biomechanics.
RESUMO
Central to the clinical adoption of patient-specific modeling strategies is demonstrating that simulation results are reliable and safe. Indeed, simulation frameworks must be robust to uncertainty in model input(s), and levels of confidence should accompany results. In this study, we applied a coupled uncertainty quantification-finite element (FE) framework to understand the impact of uncertainty in vascular material properties on variability in predicted stresses. Univariate probability distributions were fit to material parameters derived from layer-specific mechanical behavior testing of human coronary tissue. Parameters were assumed to be probabilistically independent, allowing for efficient parameter ensemble sampling. In an idealized coronary artery geometry, a forward FE model for each parameter ensemble was created to predict tissue stresses under physiologic loading. An emulator was constructed within the UncertainSCI software using polynomial chaos techniques, and statistics and sensitivities were directly computed. Results demonstrated that material parameter uncertainty propagates to variability in predicted stresses across the vessel wall, with the largest dispersions in stress within the adventitial layer. Variability in stress was most sensitive to uncertainties in the anisotropic component of the strain energy function. Moreover, unary and binary interactions within the adventitial layer were the main contributors to stress variance, and the leading factor in stress variability was uncertainty in the stress-like material parameter that describes the contribution of the embedded fibers to the overall artery stiffness. Results from a patient-specific coronary model confirmed many of these findings. Collectively, these data highlight the impact of material property variation on uncertainty in predicted artery stresses and present a pipeline to explore and characterize forward model uncertainty in computational biomechanics.
Assuntos
Vasos Coronários , Análise de Elementos Finitos , Estresse Mecânico , Humanos , Vasos Coronários/fisiologia , Incerteza , Fenômenos Biomecânicos , Modelos Cardiovasculares , Simulação por Computador , AnisotropiaRESUMO
Four-dimensional flow magnetic resonance imaging (i.e., 4D flow MRI) has become a valuable tool for the in vivo assessment of blood flow within large vessels and cardiac chambers. As wall shear stress (WSS) has been correlated with the development and progression of cardiovascular disease, focus has been directed at developing techniques to quantify WSS directly from 4D flow MRI data. The goal of this study was to compare the accuracy of two such techniques - termed the velocity and flow-based methods - in the setting of simplified and complex flow scenarios. Synthetic MR data were created from exact solutions to the Navier-Stokes equations for the steady and pulsatile flow of an incompressible, Newtonian fluid through a rigid cylinder. In addition, synthetic MR data were created from the predicted velocity fields derived from a fluid-structure interaction (FSI) model of pulsatile flow through a thick-walled, multi-layered model of the carotid bifurcation. Compared to the analytical solutions for steady and pulsatile flow, the flow-based method demonstrated greater accuracy than the velocity-based method in calculating WSS across all changes in fluid velocity/flow rate, tube radius, and image signal-to-noise (p < 0.001). Furthermore, the velocity-based method was more sensitive to boundary segmentation than the flow-based method. When compared to results from the FSI model, the flow-based method demonstrated greater accuracy than the velocity-based method with average differences in time-averaged WSS of 0.31 ± 1.03 Pa and 0.45 ± 1.03 Pa, respectively (p <0.005). These results have implications on the utility, accuracy, and clinical translational of methods to determine WSS from 4D flow MRI.
Assuntos
Hemodinâmica , Imageamento por Ressonância Magnética , Imageamento por Ressonância Magnética/métodos , Artérias Carótidas/diagnóstico por imagem , Artérias Carótidas/fisiologia , Fluxo Pulsátil , Estresse Mecânico , Velocidade do Fluxo Sanguíneo/fisiologia , Modelos CardiovascularesRESUMO
PURPOSE: To evaluate the agreement of 4D flow cMRI-derived bulk flow features and fluid (blood) velocities in the carotid bifurcation using prospective and retrospective gating techniques. METHODS: Prospective and retrospective ECG-gated three-dimensional (3D) cine phase-contrast cardiac MRI with three-direction velocity encoding (i.e., 4D flow cMRI) data were acquired in ten carotid bifurcations from men (n = 3) and women (n = 2) that were cardiovascular disease-free. MRI sequence parameters were held constant across all scans except temporal resolution values differed. Velocity data were extracted from the fluid domain and evaluated across the entire volume or at defined anatomic planes (common, internal, external carotid arteries). Qualitative agreement between gating techniques was performed by visualizing flow streamlines and topographical images, and statistical comparisons between gating techniques were performed across the fluid volume and defined anatomic regions. RESULTS: Agreement in the kinematic data (e.g., bulk flow features and velocity data) were observed in the prospectively and retrospectively gated acquisitions. Voxel differences in time-averaged, peak systolic, and diastolic-averaged velocity magnitudes between gating techniques across all volunteers were 2.7%, 1.2%, and 6.4%, respectively. No significant differences in velocity magnitudes or components ([Formula: see text], [Formula: see text], [Formula: see text]) were observed. Importantly, retrospective acquisitions captured increased retrograde flow in the internal carotid artery (i.e., carotid sinus) compared to prospective acquisitions (10.4 ± 6.3% vs. 4.6 ± 5.3%; [Formula: see text] < 0.05). CONCLUSION: Prospective and retrospective ECG-gated 4D flow cMRI acquisitions provide comparable evaluations of fluid velocities, including velocity vector components, in the carotid bifurcation. However, the increased temporal coverage of retrospective acquisitions depicts increased retrograde flow patterns (i.e., disturbed flow) not captured by the prospective gating technique.
Assuntos
Artérias Carótidas , Imageamento por Ressonância Magnética , Masculino , Humanos , Feminino , Estudos Retrospectivos , Estudos Prospectivos , Velocidade do Fluxo Sanguíneo , Imageamento por Ressonância Magnética/métodos , Artérias Carótidas/diagnóstico por imagem , Imageamento Tridimensional/métodos , Reprodutibilidade dos TestesRESUMO
Remodeling of extracellular matrix proteins underlies the development of cardiovascular disease. Herein, we utilized a novel molecular probe, collagen hybridizing peptide (CHP), to target collagen molecular damage during atherogenesis. The thoracic aorta was dissected from ApoE-/- mice that had been on a high-fat diet for 0-18 weeks. Using an optimized protocol, tissues were stained with Cy3-CHP and digested to quantify CHP with a microplate assay. Results demonstrated collagen molecular damage, inferred from Cy3-CHP fluorescence, was a function of location and time on the high-fat diet. Tissue from the aortic arch showed a significant increase in collagen molecular damage after 18 weeks, while no change was observed in tissue from the descending aorta. No spatial differences in fluorescence were observed between the superior and inferior arch tissue. Our results provide insight into the early changes in collagen during atherogenesis and present a new opportunity in the subclinical diagnosis of atherosclerosis.
Assuntos
Aterosclerose , Camundongos , Animais , Aterosclerose/metabolismo , Colágeno/metabolismo , Aorta Torácica , Dieta Hiperlipídica , Apolipoproteínas E/metabolismo , Camundongos Knockout , Modelos Animais de DoençasRESUMO
BACKGROUND: Experimental studies suggest that low wall shear stress (WSS) promotes plaque development and high WSS is associated with plaque destabilization. We hypothesized that low-WSS segments in patients with coronary artery disease develop plaque progression and high-WSS segments develop necrotic core progression with fibrous tissue regression. METHODS AND RESULTS: Twenty patients with coronary artery disease underwent baseline and 6-month radiofrequency intravascular ultrasound (virtual histology intravascular ultrasound) and computational fluid dynamics modeling for WSS calculation. For each virtual histology intravascular ultrasound segment (n=2249), changes in plaque area, virtual histology intravascular ultrasound-derived plaque composition, and remodeling were compared in low-, intermediate-, and high-WSS categories. Compared with intermediate-WSS segments, low-WSS segments developed progression of plaque area (P=0.027) and necrotic core (P<0.001), whereas high-WSS segments had progression of necrotic core (P<0.001) and dense calcium (P<0.001) and regression of fibrous (P<0.001) and fibrofatty (P<0.001) tissue. Compared with intermediate-WSS segments, low-WSS segments demonstrated greater reduction in vessel (P<0.001) and lumen area (P<0.001), and high-WSS segments demonstrated an increase in vessel (P<0.001) and lumen (P<0.001) area. These changes resulted in a trend toward more constrictive remodeling in low- compared with high-WSS segments (73% versus 30%; P=0.06) and more excessive expansive remodeling in high- compared with low-WSS segments (42% versus 15%; P=0.16). CONCLUSIONS: Compared with intermediate-WSS coronary segments, low-WSS segments develop greater plaque and necrotic core progression and constrictive remodeling, and high-WSS segments develop greater necrotic core and calcium progression, regression of fibrous and fibrofatty tissue, and excessive expansive remodeling, suggestive of transformation to a more vulnerable phenotype. Clinical Trial Registration URL: http://www.clinicaltrials.gov. Unique identifier: NCT00576576.
Assuntos
Doença da Artéria Coronariana , Vasos Coronários , Placa Aterosclerótica , Ultrassonografia de Intervenção/métodos , Idoso , Calcinose/diagnóstico por imagem , Calcinose/patologia , Calcinose/fisiopatologia , Doença da Artéria Coronariana/diagnóstico por imagem , Doença da Artéria Coronariana/patologia , Doença da Artéria Coronariana/fisiopatologia , Vasos Coronários/diagnóstico por imagem , Vasos Coronários/patologia , Vasos Coronários/fisiopatologia , Progressão da Doença , Feminino , Fibrose , Humanos , Hidrodinâmica , Masculino , Pessoa de Meia-Idade , Necrose , Placa Aterosclerótica/diagnóstico por imagem , Placa Aterosclerótica/patologia , Placa Aterosclerótica/fisiopatologia , Estudos Prospectivos , Estresse MecânicoRESUMO
Scaffold-based tissue engineering requires a resorbable scaffold that can restore function and guide regeneration. Recent advances in material fabrication have expanded our control of compositional and architectural features to approach the complexity of native tissue. However, iterative scaffold design to balance multiple design targets toward optimizing regenerative performance remains both challenging and time-consuming. The number of design parameter combinations for scaffold manufacturing to achieve target properties is nearly limitless. Although a trial-and-error experimental approach may lead to a favorable scaffold design, the time and costs associated with such an approach are enormous. Computational optimization approaches are well suited to sample such a multidimensional design space and streamline the identification of target scaffold parameters for experimental evaluation. In this computational biomechanics approach, target fabrication parameters are identified by using a computational model to iterate across design parameter combinations (input) and predict the resulting graft properties (output). Herein, we describe the three key stages of this model-directed scaffold design: (1) model development, verification, and validation; (2) in silico optimization; and (3) model-directed scaffold fabrication and testing. Although there are several notable examples that have demonstrated the potential of this approach, additional accurate and physiologically appropriate computational simulations are needed to expand its utility across the field. In addition, continued advances in material fabrication are needed to provide the requisite control and resolution to produce the model-directed design. Finally, and most importantly, active collaboration between experts in materials science and computational modeling are critical to realize the full potential of this approach to accelerate scaffold development.
Assuntos
Engenharia Tecidual , Alicerces Teciduais , Engenharia Tecidual/métodosRESUMO
Many biological tissues contain an underlying fibrous microstructure that is optimized to suit a physiological function. The fiber architecture dictates physical characteristics such as stiffness, diffusivity, and electrical conduction. Abnormal deviations of fiber architecture are often associated with disease. Thus, it is useful to characterize fiber network organization from image data in order to better understand pathological mechanisms. We devised a method to quantify distributions of fiber orientations based on the Fourier transform and the Qball algorithm from diffusion MRI. The Fourier transform was used to decompose images into directional components, while the Qball algorithm efficiently converted the directional data from the frequency domain to the orientation domain. The representation in the orientation domain does not require any particular functional representation, and thus the method is nonparametric. The algorithm was verified to demonstrate its reliability and used on datasets from microscopy to show its applicability. This method increases the ability to extract information of microstructural fiber organization from experimental data that will enhance our understanding of structure-function relationships and enable accurate representation of material anisotropy in biological tissues.
Assuntos
Encéfalo , Imagem de Difusão por Ressonância Magnética , Algoritmos , Anisotropia , Imagem de Difusão por Ressonância Magnética/métodos , Processamento de Imagem Assistida por Computador/métodos , Reprodutibilidade dos TestesRESUMO
Since the first human procedure in the late 1980s, vascular stent implantation has been accepted as a standard form of treatment of atherosclerosis. Despite their tremendous success, these medical devices are not without their problems, as excessive neointimal hyperplasia can result in the formation of a new blockage (restenosis). Clinical data suggest that stent design is a key factor in the development of restenosis. Additionally, computational studies indicate that the biomechanical environment is strongly dependent on the geometrical configuration of the stent, and, therefore, possibly involved in the development of restenosis. We hypothesize that stents that induce higher stresses on the artery wall lead to a more aggressive pathobiologic response, as determined by the amount of neointimal hyperplasia. The aim of this investigation was to examine the role of solid biomechanics in the development of restenosis. A combination of computational modeling techniques and in vivo analysis were employed to investigate the pathobiologic response to two stent designs that impose greater or lesser levels of stress on the artery wall. Stent designs were implanted in a porcine model (pigs) for approximately 28 days and novel integrative pathology techniques (quantitative micro-computed tomography, histomorphometry) were utilized to quantify the pathobiologic response. Concomitantly, computational methods were used to quantify the mechanical loads that the two stents place on the artery. Results reveal a strong correlation between the computed stress values induced on the artery wall and the pathobiologic response; the stent that subjected the artery to the higher stresses had significantly more neointimal thickening at stent struts (high-stress stent: 0.197±0.020 mm vs low-stress stent: 0.071±0.016 mm). Therefore, we conclude that the pathobiologic differences are a direct result of the solid biomechanical environment, confirming the hypothesis that stents that impose higher wall stresses will provoke a more aggressive pathobiological response.
Assuntos
Reestenose Coronária/etiologia , Desenho de Prótese , Stents/efeitos adversos , Túnica Íntima/fisiopatologia , Animais , Fenômenos Biomecânicos , Implante de Prótese Vascular , Pesos e Medidas Corporais , Simulação por Computador , Análise de Elementos Finitos , Humanos , Hiperplasia/etiologia , Modelos Biológicos , Suínos , Microtomografia por Raio-XRESUMO
The purpose of this study is to investigate the effect of varying coronary flow reserve (CFR) values on the calculation of computationally-derived fractional flow reserve (FFR). CFR reflects both vessel resistance due to an epicardial stenosis, and resistance in the distal microvascular tissue. Patients may have a wide range of CFR related to the tissue substrate that is independent of epicardial stenosis levels. Most computationally based virtual FFR values such as FFRCT do not measure patient specific CFR values but use a population-average value to create hyperemic flow conditions. In this study, a coronary arterial computational geometry was constructed using magnetic resonance angiography (MRA) data acquired in a patient with moderate CAD. Coronary flow waveforms under rest and stress conditions were acquired in 13 patients with phase-contrast magnetic resonance (PCMR) to calculate CFR, and these flow waveforms and CFR values were applied as inlet flow boundary conditions to determine FFR based on computational fluid dynamics (CFD) simulations. The stress flow waveform gave a measure of the functional significance of the vessel when evaluated with the physiologically-accurate behavior with the patient-specific CFR. The resting flow waveform was then scaled by a series of CFR values determined in the 13 patients to simulate how hyperemic flow and CFR affects FFR values. We found that FFR values calculated using non-patient-specific CFR values did not accurately predict those calculated with the true hyperemic flow waveform. This indicates that both patient-specific anatomic and flow information are required to accurately non-invasively assess the functional significance of coronary lesions.